USB Ports on 17"

I remember reading in one thread or another that one of the USB ports puts more power than the others. I think someone was trying to address why their external BUS powered USB HDD wasn't working. Someone suggested switching USB ports because of the power difference. Consequently that solved his problem. I was just wondering if anyone could verify this claim.

You got the right forum. The problem is the technical specifications for those ports are not published. Your best bet here is to use a wall powered USB hub to ensure your Bus powered devices have enough power.

Similar Messages

My USB port (closest to the screen) is not working? And what is an IR Receiver in my USB port?

Hi everyone,
     I recently found out that my USB port, closest to my screen, is not working. Before I called Apple Care for help, I performed a PRAM and a SMC RESET, which unfortunately did not work. I called Apple Care and they help me troubleshoot simple resets such as, shutdowns and restarts. The representative I spoke with conluded that the physical hardware has an issue and must be brought to the Apple Store for a diagnosis. I called the Apple Store to at least budget the fee for getting a USB port fixed and it's about $300.00. I never dropped my macbook or had any sort tactile encounterment with hard surfaces by dropping or hitting. I don't understand how my macbook pro would be physically damaged. I then thought maybe my software was out of date (right now I am running 10.9 Mavericks) or I forgot to do the minor software updates, but I was at a lost again because my macbook is up-to-date. I searched for further help and found a way to monitor what's plugged into my usb ports. (I read in the apple forums that a girl had nothing in her usb ports, but upon looking at the System Information> Hardware> USB, that the macbook recognizes that there are drives in the ports) I looked at my ports; one is being used by wirless mouse (the port that works) and the other (the port that doesnt work) is being used by an "IR RECEIVER". Now, is the IR Receiver actually using that port and that's why my macbook cannot recognize other devices inserted into that port? Or is the IR RECEIVER suppose to be in that port and that the hardware for that port is simply damaged (which would mean I need $300.00 to get that fixed)? I know this is a lot, but someone help me?
(PORT THAT WORKS)
USB Hi-Speed Bus:
Host Controller Location:          Built-in USB
Host Controller Driver:          AppleUSBEHCI
PCI Device ID:          0x1c2d
PCI Revision ID:          0x0005
PCI Vendor ID:          0x8086
Bus Number:          0xfa
FaceTime HD Camera (Built-in):
Product ID:          0x8509
Vendor ID:          0x05ac (Apple Inc.)
Version:           5.16
Serial Number:          DJHBAJ06VRDH7FL0
Speed:          Up to 480 Mb/sec
Manufacturer:          Apple Inc.
Location ID:          0xfa200000 / 3
Current Available (mA):          500
Current Required (mA):          500
Hub:
Product ID:          0x2513
Vendor ID:          0x0424 (SMSC)
Version:           b.b3
Speed:          Up to 480 Mb/sec
Location ID:          0xfa100000 / 2
Current Available (mA):          500
Current Required (mA):          2
Microsoft® Nano Transceiver v2.0:
Product ID:          0x0745
Vendor ID:          0x045e (Microsoft Corporation)
Version:           6.34
Speed:          Up to 12 Mb/sec
Manufacturer:          Microsoft
Location ID:          0xfa130000 / 6
Current Available (mA):          500
Current Required (mA):          100
Apple Internal Keyboard / Trackpad:
Product ID:          0x0252
Vendor ID:          0x05ac (Apple Inc.)
Version:           1.18
Speed:          Up to 12 Mb/sec
Manufacturer:          Apple Inc.
Location ID:          0xfa120000 / 5
Current Available (mA):          500
Current Required (mA):          40
BRCM2070 Hub:
Product ID:          0x4500
Vendor ID:          0x0a5c (Broadcom Corp.)
Version:           1.00
Speed:          Up to 12 Mb/sec
Manufacturer:          Apple Inc.
Location ID:          0xfa110000 / 4
Current Available (mA):          500
Current Required (mA):          94
Bluetooth USB Host Controller:
Product ID:          0x821a
Vendor ID:          0x05ac (Apple Inc.)
Version:           0.42
Speed:          Up to 12 Mb/sec
Manufacturer:          Apple Inc.
Location ID:          0xfa113000 / 8
Current Available (mA):          500
Current Required (mA):          0
(PORT THAT DOESN'T WORK)
USB Hi-Speed Bus:
Host Controller Location:          Built-in USB
Host Controller Driver:          AppleUSBEHCI
PCI Device ID:          0x1c26
PCI Revision ID:          0x0005
PCI Vendor ID:          0x8086
Bus Number:          0xfd
Hub:
Product ID:          0x2513
Vendor ID:          0x0424 (SMSC)
Version:           b.b3
Speed:          Up to 480 Mb/sec
Location ID:          0xfd100000 / 2
Current Available (mA):          500
Current Required (mA):          2
IR Receiver:
Product ID:          0x8242
Vendor ID:          0x05ac (Apple Inc.)
Version:           0.16
Speed:          Up to 1.5 Mb/sec
Manufacturer:          Apple Computer, Inc.
Location ID:          0xfd110000 / 3
Current Available (mA):          500
Current Required (mA):          100

I can help with the "IR Receiver" part of your question. That's the piece of hardware inside older MacBook Pros (MBPs) that lets them work with the Apple Remote. "IR" is the standard abbreviation for "infrared," the portion of the electromagnetic spectrum used by remotes for many common devices (stereos, cable boxes, Apple TVs, etc.). The remote sends a coded stream of IR pulses; a corresponding receiver in the target device "sees" the infrared light and decodes it. The MBP's internal IR Receiver sends the received signals to the processor via USB through an internal hub.
The most recent MacBook Pros have dropped the IR receiver and no longer work with the Apple Remote.

Syncing music with USB port 1.1

I just got an iPod classic 160GB, but it doesn't communicate with my computer properly.
I tried to put some songs to the new iPod, but after syncing 20 songs I got the error message "Attempting to copy to the disk "(iPod name)" failed. The disk could not be read from or written to."
I called AppleCare to solve the problem, and the guy told me that I need to upgrade the USB port from 1.1 to 2.0.
Does anybody know if I really need to upgrade my USB port to 2.0?
I read some of the topics on this discussion page and some people were saying that the USB 1.1 works with iPod classics.
I also want to know if any of the transfer cables which convert FireWire to USB2.0 works with iPods.
I don't want to spend any more money to upgrade my computer to make it work with my iPod.
(I had to upgrade OS)
Please help me to get my iPod work!!

The USB port on your Cinema is a port on the built-in hub in the display. It can't supply the power needed by the iPhone.

My new 8th gen iPod nano is 'not recognized' by my computer. My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting...

My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting, etc... But it still says "One of the USB decuces arrached to this omputer has malfunctioned and windows does not recognize it".
The iPod is brand new, sent to me by Apple as part of the 1st gen replacement programme. I've been using the cable that came with the 1st gen iPod (I bought the first gen second hand) It always worked on my computer with the 1st gen iPod. So I was wondering, do you think I need to replace my cable in order for my PC to recognize my iPod or is it something else?
Thanks

Try a different cable. And are you connecting directly to your computer or through a USB hub?

IPod is not recognized by my computer's usb port and itunes

Remove my ipod from the computer without ejecting it and now the ipod want turn on, it is not being recognized by my computer's usb port or itune. I have reinstalled itune and still have the same problems.

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4. Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job.
7. Check for third-party software conflicts.

Non grounded HP Laptop have electrical feeling on usb ports

I am living here in the Philippines now and have brought my Hp laptop dv9000. Whenever I turn on the laptop with the AC I get this electrical feeling in the usb ports. When I run with the battery I feel no electricity. Since the AC can take a 100-240V input, the outlets here in the Philippines are 240V, it shouldnt have any problems. But the charger has a 3rd prong that is used as a ground, but the wall outlet only has 2.
To better understand by setup: 1. the electrical outlet has 2 prongs that lets out 240V, 2. I have and AVR (automatic voltage regulator) so I can lower the voltage for my, 3. UPS (uninterrupted power supply) that only takes in 110V. I plug in my AC charger to the UPS to power my computer.
So my question is what can I do now to stop the the electricity coming out of the usb ports? Do I need to install a grounded socket?

Have you tried restarting the laptop? Many times we get simply put the machine to sleep or hibernate- a full shutdown/restart can help with usb problems.
You might also try disabling "USB Selective suspend" in your Power Options plan.
http://www.techsupportalert.com/content/how-fix-annoying-windows-usb-problem.htm
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

How do I get rid of error code 2001/2006? My phone is in recovery mode. I have tried several different cords, all USB ports, my macbook, and a friends PC. This is the second time my phone has done this, the first time it was an easy fix.

I have an iPhone 4. It is in great condition, always protected. A couple months ago, it randomly went black and wouldn't turn on. I put it in recovery mode, plugged it in to my MacBook Pro and would get error code 2001 then I'd get error code 2006. I read some different forums and many people said to try using a different USB port and different cords. The last cord I tried, worked and my phone was back. Last night, my phone did the same exact thing. So I used the same method I used last time, however nothing has worked. I tried plugging it in to a PC and that didn't work either. This seems like a hopeless problem that's going to continue to happen. Any advice?

Soooooooo.... You obviously need to restore the device
It seems that you have tried several options to restore it. What I would do is leave it plugged it and hold down the Home button AND the Power button together till you see the white apple appears. Then let go of the Power button but continue to hold the home button. You should get the message in iTunes again saying that the iPhone needs to be restored. Hit OK then RESTORE.
Hope this helps!!

Problems with USB port and song transferring;

Hi! I just got an iPod and I am having problems with it. My computer doesn't have a Hi-Speed USB port, even if it's 9 months old. Some of my friends don't have it either but they still are able to transfer songs onto their iPod. For mine, it keeps saying "Do Not Disconnect." I waited for 5 hours last time I got it and it still isn't working.
I also updated my iPod software today and the iPod icon isn't appearing on the bar to the left in iTunes. I'd really appreciate any help on this! As well as if I really need to do something about the ports or if it could function like this normally.

Quote from: Svet on 08-December-10, 00:48:07
Install chipset drivers from MSI web:
http://eu.msi.com/index.php?func=driverfile&dno=2427&i=0
+
NEC USB 3.0 Drivers:
http://eu.msi.com/index.php?func=driverfile&dno=11189&i=0
are these the same driver provided with the disc driver? as i already installed both of these..

IPhone 6 won't play with Kenwood stereo USB port. Help !!

I have a Kenwood KDC-BT743U Stereo in my car, which has a front panel USB port. I've been able to connect my iPhone 4S and play music from my iTunes catalog as well as stream music from Pandora, Soundcloud, Tune In Radio, Mixcloud et al, without any problems until yesterday.....
Now that I've upgraded my phone to a iPhone 6 and when I connect it to the stereo via the USB port, it doesnt play at all. After about 2 minutes of trying to connect , I recieve a 'USB Error" . As I stated, I've had no problems with my iPhone 4S, which I've used with this same stereo deck for the last two years without any problem what so ever.
I'm looking for some guidance on next steps to take in order to fix the problem? Did Apple change the spec in some sort of way? Do I need to go to Kenwood for a firmware update (their website provides no information about iPhone 6 compatability with any of their stereo's which is very odd to me) ?
Please help, my life in the car during long commutes is just not the same......

Possible Solution:
1. Go to Settings > General
2. Go to Restrictions
3. Enter Passcode (possibly x2)
4. Enable Restrictions
5 Disallow CarPlay
6. Reset Network Settings (Not 100% sure if this step is needed)
7. Have at least 1 song in Apple Music App
8. Have Iphone at Home Screen
9. Connect Apple Original Cable
10. That 1 Song should start playing
11. Open Prefered Streaming App and hit Play
Carplay negatively affects USB connection with Non-Carplay USB Audio Receivers.
I have the Iphone 6 with 8.3 iOS connected to Pioneer avh-41000dvd car stereo and the above solution fixed USB audio issues, including Error code 22-65.
If you are having issues upon reconnect, disconnect and bring Iphone to home screen and reconnect.

USB ports not working properly

I have a pavillion dv4 1123us - old. It is not recognizing usb devices - although the usb ports are still providing power. I have tried reinstalling the chipset and reinstalling the usb ports by deleting from device manager. Intermittently, my modem seems to fade in and out but is easy to reset - just annoying. I have tried to find a way to reinstall the bios but have been unsuccessful. Please give suggestions.

USB devices can be rather problematic as you probably already know. Thus I'd start the troubleshooting process in this situation by plugging devices (one at a time) directly into the Mac, dispensing with the hub, to see whether problems continue or not. If they do, then it means the hub is not to blame while it the problems don't recur, the hub is the culprit and would warrant being replaced.
Be aware however, that since USB is controlled by the CPU, the rate at which data streams is dependent to some degree on what else the system is doing. Thus you can help reduce issues by ensuring the system isn't busy with other tasks while you have something critical going on via USB. Or, as you discovered with MP3 playback, use firewire instead. Firewire is controlled by a dedicated controller, so performance doesn't vary with system load. That's why it is generally recommended that for situations where data needs to be streamed to or from external devices such as video cameras, hard drives, DVD burners etc, these are best connected via FW rather than USB.

How can I test the usb port on my Time Capsule to see if it is working?

Ever since lightening struck nearby (which took out our internet and copy machine) the printer I had connected to the usb port on my Time Capsule in my office has has failed to print through the TC. I can plug the printer directly into my MacBookAir and can print just fine. So there is nothing wrong with the printer nor the usb cable.
I've turned off and unplugged the printer with the usb cable connected & disconnected to the TC, no change. I've unplugged the TC, no change. I've opened the printer utility several times, and always get the "offline" error. I open the print queue, and it says the printer is not connected. I reinstalled the driver for the printer, still the same thing.
I'm starting to wonder if the usb port on my Time Capsule got fried. Any help anyone can give in trying to see if the usb port even functions anymore would be greatly appreciated.
My Time Capsule is model no. A1409.

Power is not likely to be killed .. it is the data components that are more fragile.
So you do have power which as you say is why the USB flashes.. but you don't have signal.
The only other thing you can do is use USB powered hub.. if you have one handy.. but I would not go out and buy one.
A damaged board is impossible (at cost less than replacement TC) to repair. And repairers do not like working on stuff damaged by lightning as components that did survive were stressed.. the transistor junctions become liable to fail at any time.. so you repair it and it just keeps coming back as not working. Sorry if you cannot use it without USB junk it and buy a replacement. A second hand Gen3 is about the best of them it seems.
You can also buy an ethernet to USB print server.. but a new ethernet or wireless network printer is probably near to the same price.
You can hunt ebay for second hand USB print servers.. or airport express, extreme or TC.. often you can find something suitable for just a few dollars if you shop well. Since you don't need the latest greatest to do this sort of job.. and people are disposing of things like USB print servers as soon as they buy network printers.

How do i configure the usb port on a draytek vigor 2820n router for use with my imac

i have an imac connected to the internet through a draytek vigor 2820n router. this router has a USB port with a HP Deskjet 5560 printer attached (for use as a network printer for other machines on the network). How do I configure this printer on the iMAC?

I checked on the HP web site. Your aswer is on the HP website under your printer type. Update your drivers and follow the instructions given by HP and the printer will work as you have it connected.
Good Luck

How do I use a NORMAL headset (dual 3.5mm) on my new Macbook pro retina? No usb ports available and headset buddy adapter doesn't work.

Title says it all:
How do I use a NORMAL headset (dual 3.5mm) on my new Macbook pro retina? No usb ports available and headset buddy adapter doesn't work.

Hi Auracles1,
Here's a pretty discussion regarding wireless printing with this device and a Mac.
http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/HP-Officejet-6500-E 709n-wireless-issue/m-p/258853
I have a similar OfficeJet and it was a multi-step process. (1) Install printer drivers on the machine, (2) Add the printer queue in print & fax, (3) Run the "setup wizard" from the disc for wireless printing.

How do I configure my Airport Extreme to see the printer I have plugged into the USB port?

How do I configure my Airport Extreme to see the printer I have plugged into the USB port?

OK. The 6.0 version no longer has a printer configuration that I could find. You might try Printer Sharing in the Sharing preferences.
I would also check the printer's user manual for help with the setup, and that failing check the manufacturer's website and/or tech support.

Keyboard, Trackpad, Mouse and USB ports - Not Responding

Hello,
Here is my problem. Today when I started my MBP, there was no keyboard, no mouse(USB), no trackpad, no USB ports. I restarted it several times, but nothing changes. If not everything looks fine My desktop is availble, also the backlight on the keyboard works fine, but I can do nothing, my MBP is unusable. Only the power button works fine. I tried to connect an external USB keybord without success, the same with usb drives. I'm running 10.5.6 on MBP, Core Duo 1.83 GHz, 2 GB RAM.
I found many discussions here about the same problem( http://discussions.apple.com/thread.jspa?threadID=1568210&tstart=0 ), I tried a restart without battery etc.... Nothing helps.
Please help, my warranty passed away
Message was edited by: gvassilev

As this is literally a brand new imac, I would hope that the ports aren't giving up as I am sure they are very expensive to replace.
If it is that new you should be under applecare so you could take it your nearest apple store and let them deal with it (or call apple first if you want).
Besides the keyboard do you have anything else connected to the usb ports that may be drawing off too much usb power? In which case you may need a powered usb hub.

E3200 - USB port does NOT work for more than one device

We needed a new router that had the dual band connectivity as our previous router stopped working properly when we started using a baby monitor operating on the same 2.4 GHz. The choice was between E3200 and E2500. We chose the E3200 mainly because it also offered a USB port. We were hoping to use that to connect our printer and two external drives (thus bypassing our old desktop that's been working as a server). However, it turns out that the USB port on E3200 does NOT support USB hubs! So, you can ONLY use ONE device - either a printer or one external storage drive. That wasn't really clear at all from the description. I feel like we wasted the extra $50 hoping to get functionality that just isn't there. Can't believe that in this day and age, Cisco thinks we all have only ONE USB device we might want to connect to the network! The router itself is fast enough, but the extra $50 for a USB port that doesn't do much and some speedboost phantom ability is just not worth it.

Just to save time to you all, after numerous attempts to install a USB hub to my E3200,
I wrote to Cisco Customer Service (live chat) and I specifically requested how to set up the usb hub or the virtual USB port and they said that they do not have a software to install a USB hub.
Hope this help
Massimo
(Mod note: Edited for guideline compliance.)

USB Ports on 17"

Similar Messages

Maybe you are looking for