USB Ports Randomly Stop Working

I have an HP Pavilion dv6 Notebook with Windows 7. All of the ports, 2 2.0 and 2 3.0 ports, began to randomly stop working. My mouse light would still light up, but the mouse wouldn't work. If I rebooted the entire laptop, all of the ports would come back on for a short period of time before they randomly shut off again. They will also come back on for a short period of time if I close the lid for a few seconds and reopen it. However, lately, the 3.0 ports have stopped working entirely and the 2.0 ports stopping is becoming more frequent.
The first time I noticed this was when I was testing a micro usb cable (it has stopped charging and I was testing whether it was the cable or the wall adapter). I plugged the cable into one of the 2.0 ports and it gave me a USB surge warning. Other than that, I haven't received any notices. The drivers are up to date. I have uninstalld the root hubs multiple times. I have tried all kinds of Power plans for the laptop. Nothing works. The USB ports still stop working, and it's becoming increasingly more frustrating.

Hello Abby_Renee,
With the USB 3.0 port not working, and your 2.0 port working intermittently, I would suggest the following document Troubleshooting USB Connections (Windows 7) for troubleshooting.
In this document there is a specific option for USB 3.0 ports stop working, which would be the best steps to follow for your 3.0 ports. Now for the 2.0 ports, I would suggest USB device not detected by Windows (no device name in device manager), or the other option is USB devices are detected by Windows but are not working properly. The last two options are dependant on the specific errors you are experiencing.
Please let me know the outcome of the troubleshooting steps.
Good Luck!
I worked on behalf of HP

Similar Messages

  • I have a mac book pro that both USB ports have stopped working one about a year ago and one recently. Is it possible to connect to another one of the other MBP's  ports with a cord that ends with a USB port?

    I have a mac book pro that both USB ports have stopped working one about a year ago and one recently. Is it possible to connect to another one of the other MBP's  ports with a cord that ends with a USB port?

    Thank you For your time and thoughts!
    I went by the Apple Store and they told me that there was a "Flat Rate" repair service for this particular part where they would replace the logic board along with the USB ports for $350. Seems like best avenue. All of this would have been moot but my wifi in the computer also doesn't work so I was using my phone as a hot spot and tethering it to the computer for Internet access when the last port quit. This left me with no internet and no printing capabilities on the computer I use for my business. Basically became a nice paperweight. lol
    They will ship it off Monday and I should have it back Thursday!
    Again, thank you!

  • Ethernet Port randomly stopped working - u310 ultrabook

    Hi,
    So my Ethernet Port on the u310 Ideapad has randomly stopped working - by that I mean that when I plug in my LAN wire, the lights will show only when I switch on my laptop, till the Windows logo comes on, which is when the lights of the port go off and the port refuses to work.
    I need LAN pretty urgently, so I was wondering if someone could please help me out! Thanks!

    Hi Ipsh,
    thanks for posting and welcome to the community. Based from your post there is apossibility that it it could be hardware. But however before we confirm let just trya few setting and software adjustment first. At this point I was just wondering if you have tried doing a software update, I would suggest you to uninstall the current drivers you have now and reinstall the drivers below.
    http://download.lenovo.com/consumer/mobiles/0wla01ww.exe
    Please be informed that the driver above is meant for windows 7, if you have another operating system installed do let me know.
    Regards

  • USB ports suddenly stop working: xhci_hcd and ehci_hcdwontload[SOLVED]

    Hello everyone.  I am having USB issues on my HP dv6t-7000. I was using my USB keyboard/mouse and the USB was working fine.  I then plug in a flash drive and ALL USB PORTS STOP WORKING.  So I tried the usual fix of reloading xhci_hcd. 
    rmmod xhci_hcd
    modprobe xhci_hcd
    but nothing happens.  I check lsmod and the module is not loaded. Neither is ehci_hcd:
    Module Size Used by
    nls_utf8 1353 1
    udf 80114 1
    crc_itu_t 1364 1 udf
    fuse 69245 3
    bbswitch 5731 0
    coretemp 6231 0
    kvm_intel 124064 0
    kvm 384721 1 kvm_intel
    arc4 2008 2
    crc32c_intel 1988 0
    ghash_clmulni_intel 4598 0
    aesni_intel 46104 0
    uvcvideo 73462 0
    videobuf2_vmalloc 2789 1 uvcvideo
    videobuf2_memops 2827 1 videobuf2_vmalloc
    videobuf2_core 24073 1 uvcvideo
    aes_x86_64 7556 1 aesni_intel
    videodev 104777 2 uvcvideo,videobuf2_core
    rt2800pci 9864 0
    rt2800lib 49648 1 rt2800pci
    rt2x00pci 5052 1 rt2800pci
    rt2x00lib 36341 3 rt2x00pci,rt2800lib,rt2800pci
    snd_hda_codec_hdmi 27561 1
    snd_hda_codec_idt 55976 1
    hp_wmi 7899 0
    snd_hda_intel 27700 2
    snd_hda_codec 100743 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
    snd_hwdep 6429 1 snd_hda_codec
    snd_pcm 77827 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    acpi_cpufreq 10631 1
    eeprom_93cx6 2218 1 rt2800pci
    mperf 1268 1 acpi_cpufreq
    mac80211 432402 3 rt2x00lib,rt2x00pci,rt2800lib
    cfg80211 179435 2 mac80211,rt2x00lib
    ablk_helper 1973 1 aesni_intel
    snd_page_alloc 7427 2 snd_pcm,snd_hda_intel
    hp_accel 16521 0
    psmouse 76176 0
    media 10438 2 uvcvideo,videodev
    sparse_keymap 3089 1 hp_wmi
    lis3lv02d 11636 1 hp_accel
    iTCO_wdt 5288 0
    serio_raw 5074 0
    input_polldev 2915 1 lis3lv02d
    joydev 9728 0
    processor 27496 1 acpi_cpufreq
    pcspkr 1900 0
    rfkill 15997 3 cfg80211,hp_wmi
    snd_timer 18935 1 snd_pcm
    mei 61037 0
    cryptd 8742 3 ghash_clmulni_intel,aesni_intel,ablk_helper
    evdev 10137 11
    iTCO_vendor_support 1930 1 iTCO_wdt
    ac 2569 0
    thermal 8418 0
    battery 7099 0
    lpc_ich 11346 0
    xts 3136 1 aesni_intel
    r8169 56712 0
    lrw 3662 1 aesni_intel
    mii 4092 1 r8169
    gf128mul 6051 2 lrw,xts
    crc_ccitt 1364 1 rt2800lib
    i2c_i801 10917 0
    snd 60157 11 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_idt,snd_pcm,snd_hda_codec,snd_hda_intel
    hid_generic 1146 0
    mxm_wmi 1468 0
    wmi 8380 2 hp_wmi,mxm_wmi
    microcode 14434 0
    soundcore 5443 1 snd
    ext4 447457 2
    crc16 1360 1 ext4
    jbd2 78834 1 ext4
    mbcache 6027 1 ext4
    usbhid 41358 0
    hid 86421 2 hid_generic,usbhid
    sr_mod 14824 1
    cdrom 35521 1 sr_mod
    sd_mod 31067 3
    ahci 21393 5
    libahci 20907 1 ahci
    libata 168540 2 ahci,libahci
    scsi_mod 130423 3 libata,sd_mod,sr_mod
    usbcore 173914 2 uvcvideo,usbhid
    usb_common 955 1 usbcore
    i915 526734 3
    video 11332 1 i915
    button 4670 1 i915
    i2c_algo_bit 5392 1 i915
    intel_agp 10745 1 i915
    intel_gtt 15361 2 i915,intel_agp
    drm_kms_helper 33007 1 i915
    drm 225482 4 i915,drm_kms_helper
    i2c_core 23076 6 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,videodev
    Then I look at dmesg:
    [ 2179.728545] usb 3-1: new high-speed USB device number 3 using xhci_hcd
    [ 2181.739284] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 2 ep 2 with no TDs queued?
    [ 2181.739289] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 2 ep 1 with no TDs queued?
    [ 2181.739292] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 2 ep 0 with no TDs queued?
    [ 2198.969052] xhci_hcd 0000:00:14.0: remove, state 4
    [ 2198.969064] usb usb4: USB disconnect, device number 1
    [ 2198.969194] xHCI xhci_drop_endpoint called for root hub
    [ 2198.969197] xHCI xhci_check_bandwidth called for root hub
    [ 2198.973684] xhci_hcd 0000:00:14.0: USB bus 4 deregistered
    [ 2198.973694] xhci_hcd 0000:00:14.0: remove, state 1
    [ 2198.973701] usb usb3: USB disconnect, device number 1
    [ 2198.973704] usb 3-1: USB disconnect, device number 3
    [ 2198.974681] usb 3-4: USB disconnect, device number 2
    [ 2199.140187] xhci_hcd 0000:00:14.0: Slot 1 endpoint 2 not removed from BW list!
    [ 2199.140192] xhci_hcd 0000:00:14.0: Slot 1 endpoint 4 not removed from BW list!
    [ 2199.140308] xHCI xhci_drop_endpoint called for root hub
    [ 2199.140311] xHCI xhci_check_bandwidth called for root hub
    [ 2199.140639] xhci_hcd 0000:00:14.0: USB bus 3 deregistered
    [ 2328.659201] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 2328.868886] usb 1-1.2: new high-speed USB device number 5 using ehci_hcd
    [ 2347.145796] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 2347.288443] usb 1-1.2: USB disconnect, device number 5
    [ 2359.582513] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 2359.795564] usb 1-1.2: new high-speed USB device number 6 using ehci_hcd
    [ 2376.424057] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 2376.450686] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 2376.450717] ehci_hcd 0000:00:1d.0: remove, state 4
    [ 2376.450728] usb usb2: USB disconnect, device number 1
    [ 2376.450731] usb 2-1: USB disconnect, device number 2
    [ 2376.456233] ehci_hcd 0000:00:1d.0: USB bus 2 deregistered
    [ 2376.467332] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 2376.493962] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 2376.493982] ehci_hcd 0000:00:1a.0: remove, state 4
    [ 2376.493993] usb usb1: USB disconnect, device number 1
    [ 2376.493997] usb 1-1: USB disconnect, device number 2
    [ 2376.493999] usb 1-1.1: USB disconnect, device number 3
    [ 2376.494208] usb 1-1.2: USB disconnect, device number 6
    [ 2376.494346] usb 1-1.3: USB disconnect, device number 4
    [ 2376.536849] ehci_hcd 0000:00:1a.0: USB bus 1 deregistered
    [ 2517.463171] CPU3: Package power limit notification (total events = 81)
    [ 2517.463174] CPU1: Package power limit notification (total events = 81)
    [ 2517.463175] CPU2: Package power limit notification (total events = 81)
    [ 2517.463177] CPU0: Package power limit notification (total events = 81)
    [ 2517.474151] CPU1: Package power limit normal
    [ 2517.474153] CPU2: Package power limit normal
    [ 2517.474154] CPU3: Package power limit normal
    [ 2517.474163] CPU0: Package power limit normal
    [ 3126.529391] CPU1: Package power limit notification (total events = 125)
    [ 3126.529392] CPU0: Package power limit notification (total events = 125)
    [ 3126.529395] CPU2: Package power limit notification (total events = 125)
    [ 3126.529396] CPU3: Package power limit notification (total events = 125)
    [ 3126.529790] CPU1: Package power limit normal
    [ 3126.529791] CPU3: Package power limit normal
    [ 3126.529792] CPU2: Package power limit normal
    [ 3126.529793] CPU0: Package power limit normal
    The journalctl:
    Feb 05 17:28:26 ryan-linux-desktop kernel: xhci_hcd 0000:00:14.0: WARN Event TRB for slot 2 ep 2 with no TDs queued?
    Feb 05 17:28:26 ryan-linux-desktop kernel: xhci_hcd 0000:00:14.0: WARN Event TRB for slot 2 ep 1 with no TDs queued?
    Feb 05 17:28:26 ryan-linux-desktop kernel: xhci_hcd 0000:00:14.0: WARN Event TRB for slot 2 ep 0 with no TDs queued?
    Feb 05 17:28:44 ryan-linux-desktop sudo[26409]: ryanvade : TTY=pts/2 ; PWD=/home/ryanvade ; USER=root ; COMMAND=/usr/bin/rmmod xhci_hcd
    Feb 05 17:28:44 ryan-linux-desktop sudo[26409]: pam_unix(sudo:session): session opened for user root by ryanvade(uid=0)
    Feb 05 17:28:44 ryan-linux-desktop kernel: xhci_hcd 0000:00:14.0: remove, state 4
    Feb 05 17:28:44 ryan-linux-desktop kernel: usb usb4: USB disconnect, device number 1
    Feb 05 17:28:44 ryan-linux-desktop kernel: xHCI xhci_drop_endpoint called for root hub
    Feb 05 17:28:44 ryan-linux-desktop kernel: xHCI xhci_check_bandwidth called for root hub
    Feb 05 17:28:44 ryan-linux-desktop kernel: xhci_hcd 0000:00:14.0: USB bus 4 deregistered
    Feb 05 17:28:44 ryan-linux-desktop kernel: xhci_hcd 0000:00:14.0: remove, state 1
    Feb 05 17:28:44 ryan-linux-desktop kernel: usb usb3: USB disconnect, device number 1
    Feb 05 17:28:44 ryan-linux-desktop kernel: usb 3-1: USB disconnect, device number 3
    Feb 05 17:28:44 ryan-linux-desktop kernel: usb 3-4: USB disconnect, device number 2
    Feb 05 17:28:44 ryan-linux-desktop sudo[26409]: pam_unix(sudo:session): session closed for user root
    Feb 05 17:28:44 ryan-linux-desktop kernel: xhci_hcd 0000:00:14.0: Slot 1 endpoint 2 not removed from BW list!
    Feb 05 17:28:44 ryan-linux-desktop kernel: xhci_hcd 0000:00:14.0: Slot 1 endpoint 4 not removed from BW list!
    Feb 05 17:28:44 ryan-linux-desktop kernel: xHCI xhci_drop_endpoint called for root hub
    Feb 05 17:28:44 ryan-linux-desktop kernel: xHCI xhci_check_bandwidth called for root hub
    Feb 05 17:28:44 ryan-linux-desktop kernel: xhci_hcd 0000:00:14.0: USB bus 3 deregistered
    Feb 05 17:28:50 ryan-linux-desktop sudo[26473]: ryanvade : TTY=pts/2 ; PWD=/home/ryanvade ; USER=root ; COMMAND=/sbin/modprobe xhci_hcd
    Feb 05 17:28:50 ryan-linux-desktop sudo[26473]: pam_unix(sudo:session): session opened for user root by ryanvade(uid=0)
    Feb 05 17:28:50 ryan-linux-desktop sudo[26473]: pam_unix(sudo:session): session closed for user root
    Feb 05 17:28:55 ryan-linux-desktop sudo[26522]: ryanvade : TTY=pts/2 ; PWD=/home/ryanvade ; USER=root ; COMMAND=/sbin/modprobe xhci_hcd
    Feb 05 17:28:55 ryan-linux-desktop sudo[26522]: pam_unix(sudo:session): session opened for user root by ryanvade(uid=0)
    Feb 05 17:28:55 ryan-linux-desktop sudo[26522]: pam_unix(sudo:session): session closed for user root
    Feb 05 17:29:00 ryan-linux-desktop sudo[26561]: ryanvade : TTY=pts/2 ; PWD=/home/ryanvade ; USER=root ; COMMAND=/sbin/modprobe xhci_hcd
    Feb 05 17:29:00 ryan-linux-desktop sudo[26561]: pam_unix(sudo:session): session opened for user root by ryanvade(uid=0)
    Feb 05 17:29:00 ryan-linux-desktop sudo[26561]: pam_unix(sudo:session): session closed for user root
    Feb 05 17:29:10 ryan-linux-desktop sudo[26652]: ryanvade : TTY=pts/2 ; PWD=/home/ryanvade ; USER=root ; COMMAND=/usr/bin/rmmod xhci_hcd
    Feb 05 17:29:10 ryan-linux-desktop sudo[26652]: pam_unix(sudo:session): session opened for user root by ryanvade(uid=0)
    Feb 05 17:29:10 ryan-linux-desktop sudo[26652]: pam_unix(sudo:session): session closed for user root
    Feb 05 17:29:17 ryan-linux-desktop sudo[26714]: ryanvade : TTY=pts/2 ; PWD=/home/ryanvade ; USER=root ; COMMAND=/sbin/modprobe xhci_hcd
    Feb 05 17:29:17 ryan-linux-desktop sudo[26714]: pam_unix(sudo:session): session opened for user root by ryanvade(uid=0)
    Feb 05 17:29:17 ryan-linux-desktop sudo[26714]: pam_unix(sudo:session): session closed for user root
    Feb 05 17:29:25 ryan-linux-desktop sudo[26785]: ryanvade : TTY=pts/2 ; PWD=/home/ryanvade ; USER=root ; COMMAND=/sbin/modprobe xhci_hcd
    Feb 05 17:29:25 ryan-linux-desktop sudo[26785]: pam_unix(sudo:session): session opened for user root by ryanvade(uid=0)
    Feb 05 17:29:25 ryan-linux-desktop sudo[26785]: pam_unix(sudo:session): session closed for user root
    Feb 05 17:29:29 ryan-linux-desktop sudo[26826]: ryanvade : TTY=pts/2 ; PWD=/home/ryanvade ; USER=root ; COMMAND=/sbin/modprobe xhci_hcd
    Feb 05 17:29:29 ryan-linux-desktop sudo[26826]: pam_unix(sudo:session): session opened for user root by ryanvade(uid=0)
    Feb 05 17:29:29 ryan-linux-desktop sudo[26826]: pam_unix(sudo:session): session closed for user root
    Feb 05 17:29:30 ryan-linux-desktop sudo[26836]: ryanvade : TTY=pts/2 ; PWD=/home/ryanvade ; USER=root ; COMMAND=/sbin/modprobe xhci_hcd
    Feb 05 17:29:30 ryan-linux-desktop sudo[26836]: pam_unix(sudo:session): session opened for user root by ryanvade(uid=0)
    Feb 05 17:29:30 ryan-linux-desktop sudo[26836]: pam_unix(sudo:session): session closed for user root
    Feb 05 17:29:34 ryan-linux-desktop su[26853]: (to root) ryanvade on /dev/pts/2
    Feb 05 17:29:34 ryan-linux-desktop su[26853]: pam_unix(su:session): session opened for user root by ryanvade(uid=1000)
    Feb 05 17:30:54 ryan-linux-desktop kernel: ehci_hcd 0000:00:1a.0: setting latency timer to 64
    Feb 05 17:30:54 ryan-linux-desktop kernel: usb 1-1.2: new high-speed USB device number 5 using ehci_hcd
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27597]: Warning: Configuration file /etc/laptop-mode/conf.d/board-specific/* is not readable, skipping.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27603]: Warning: Configuration file /etc/laptop-mode/conf.d/board-specific/* is not readable, skipping.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27605]: Determining power state from /sys/class/power_supply/ADP1/online.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27612]: Not trying other options, already found a power supply.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27618]: Determining power state from /sys/class/power_supply/ADP1/online.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27625]: Not trying other options, already found a power supply.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27631]: Battery level polling is disabled.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27636]: Prelim lock acquisition on descriptor 8 with pid 27589
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27640]: Battery level polling is disabled.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27642]: Prelim lock acquisition on descriptor 9 with pid 27589
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27643]: Now invoking lmt_main_function with arguments -- force
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27645]: Prelim lock acquisition on descriptor 8 with pid 27593
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27648]: Couldn't acquire prelim lock on descriptor 9 with pid 27593
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27649]: On battery power: Activating, because ENABLE_LAPTOP_MODE_ON_BATTERY is set.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27650]: Now invoking lock_retry with arguments -- force
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27652]: Not on AC and we have battery information in /sys/class/power_supply/BAT* -- checking minimum battery charge.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27656]: /sys/class/power_supply/ADP1 is of type Mains.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27657]: Not of type "Battery", skipping.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27659]: /sys/class/power_supply/BAT0 is of type Battery.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27660]: Checking levels for /sys/class/power_supply/BAT0.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27663]: Present: 1.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27665]: Remaining charge: 2101000
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27667]: Full capacity: 5591000
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27669]: Laptop mode
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27670]: Checking if desired state is different from current state.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27671]: enabled, active
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27672]: Module /usr/share/laptop-mode-tools/modules/ac97-powersave is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27673]: Module /usr/share/laptop-mode-tools/modules/battery-level-polling is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27674]: Module /usr/share/laptop-mode-tools/modules/bluetooth is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27675]: Module /usr/share/laptop-mode-tools/modules/configuration-file-control is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27676]: Module /usr/share/laptop-mode-tools/modules/cpufreq is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27677]: Module /usr/share/laptop-mode-tools/modules/dpms-standby is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27678]: Module /usr/share/laptop-mode-tools/modules/eee-superhe is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27679]: Module /usr/share/laptop-mode-tools/modules/ethernet is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27680]: Module /usr/share/laptop-mode-tools/modules/exec-commands is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27681]: Module /usr/share/laptop-mode-tools/modules/hal-polling is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27682]: Module /usr/share/laptop-mode-tools/modules/hdparm is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27683]: Module /usr/share/laptop-mode-tools/modules/intel-hda-powersave is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27684]: Module /usr/share/laptop-mode-tools/modules/intel-sata-powermgmt is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27685]: Module /usr/share/laptop-mode-tools/modules/laptop-mode is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27686]: Module /usr/share/laptop-mode-tools/modules/lcd-brightness is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27687]: Module /usr/share/laptop-mode-tools/modules/nmi-watchdog is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27688]: Module /usr/share/laptop-mode-tools/modules/runtime-pm is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27689]: Module /usr/share/laptop-mode-tools/modules/sched-mc-power-savings is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27690]: Module /usr/share/laptop-mode-tools/modules/sched-smt-power-savings is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27691]: Module /usr/share/laptop-mode-tools/modules/start-stop-programs is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27692]: Module /usr/share/laptop-mode-tools/modules/syslog-conf is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27693]: Module /usr/share/laptop-mode-tools/modules/terminal-blanking is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27694]: Invoking module /usr/share/laptop-mode-tools/modules/usb-autosuspend.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27706]: Enabling autosuspend mode for USBCORE Controller, with timeout 2.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27707]: Module /usr/share/laptop-mode-tools/modules/video-out is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27709]: Module /usr/share/laptop-mode-tools/modules/wireless-ipw-power is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27714]: Enabling auto suspend mode for usb device 1-1.2.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27713]: Module /usr/share/laptop-mode-tools/modules/wireless-iwl-power is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27715]: Module /usr/share/laptop-mode-tools/modules/wireless-power is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27717]: Module /usr/local/lib/laptop-mode-tools/modules/* is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27716]: Enabling auto power level for usb device 1-1.2.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27718]: Module /usr/local/share/laptop-mode-tools/modules/* is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27719]: Module /etc/laptop-mode/modules/* is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27722]: On battery power: Activating, because ENABLE_LAPTOP_MODE_ON_BATTERY is set.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27724]: Not on AC and we have battery information in /sys/class/power_supply/BAT* -- checking minimum battery charge.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27726]: /sys/class/power_supply/ADP1 is of type Mains.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27727]: Not of type "Battery", skipping.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27729]: /sys/class/power_supply/BAT0 is of type Battery.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27730]: Checking levels for /sys/class/power_supply/BAT0.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27732]: Present: 1.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27734]: Remaining charge: 2101000
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27736]: Full capacity: 5591000
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27738]: Laptop mode
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27739]: Checking if desired state is different from current state.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27740]: enabled, active
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27741]: Module /usr/share/laptop-mode-tools/modules/ac97-powersave is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27742]: Module /usr/share/laptop-mode-tools/modules/battery-level-polling is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27743]: Module /usr/share/laptop-mode-tools/modules/bluetooth is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27744]: Module /usr/share/laptop-mode-tools/modules/configuration-file-control is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27745]: Module /usr/share/laptop-mode-tools/modules/cpufreq is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27746]: Module /usr/share/laptop-mode-tools/modules/dpms-standby is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27747]: Module /usr/share/laptop-mode-tools/modules/eee-superhe is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27748]: Module /usr/share/laptop-mode-tools/modules/ethernet is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27749]: Module /usr/share/laptop-mode-tools/modules/exec-commands is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27750]: Module /usr/share/laptop-mode-tools/modules/hal-polling is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27751]: Module /usr/share/laptop-mode-tools/modules/hdparm is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27752]: Module /usr/share/laptop-mode-tools/modules/intel-hda-powersave is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27753]: Module /usr/share/laptop-mode-tools/modules/intel-sata-powermgmt is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27754]: Module /usr/share/laptop-mode-tools/modules/laptop-mode is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27755]: Module /usr/share/laptop-mode-tools/modules/lcd-brightness is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27756]: Module /usr/share/laptop-mode-tools/modules/nmi-watchdog is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27757]: Module /usr/share/laptop-mode-tools/modules/runtime-pm is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27758]: Module /usr/share/laptop-mode-tools/modules/sched-mc-power-savings is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27759]: Module /usr/share/laptop-mode-tools/modules/sched-smt-power-savings is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27760]: Module /usr/share/laptop-mode-tools/modules/start-stop-programs is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27761]: Module /usr/share/laptop-mode-tools/modules/syslog-conf is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27762]: Module /usr/share/laptop-mode-tools/modules/terminal-blanking is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27764]: Invoking module /usr/share/laptop-mode-tools/modules/usb-autosuspend.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27776]: Enabling autosuspend mode for USBCORE Controller, with timeout 2.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27777]: Module /usr/share/laptop-mode-tools/modules/video-out is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27780]: Module /usr/share/laptop-mode-tools/modules/wireless-ipw-power is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27781]: Module /usr/share/laptop-mode-tools/modules/wireless-iwl-power is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27782]: Module /usr/share/laptop-mode-tools/modules/wireless-power is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27785]: Not enabling auto suspend mode for usb device 1-1.2:1.0
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27786]: Module /usr/local/lib/laptop-mode-tools/modules/* is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27787]: Not enabling auto power level for usb device 1-1.2:1.0
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27788]: Module /usr/local/share/laptop-mode-tools/modules/* is not executable or is to be skipped.
    Feb 05 17:30:54 ryan-linux-desktop laptop-mode[27789]: Module /etc/laptop-mode/modules/* is not executable or is to be skipped.
    Feb 05 17:31:12 ryan-linux-desktop kernel: ehci_hcd 0000:00:1a.0: setting latency timer to 64
    Feb 05 17:31:12 ryan-linux-desktop kernel: usb 1-1.2: USB disconnect, device number 5
    Feb 05 17:31:24 ryan-linux-desktop kernel: ehci_hcd 0000:00:1a.0: setting latency timer to 64
    Feb 05 17:31:25 ryan-linux-desktop kernel: usb 1-1.2: new high-speed USB device number 6 using ehci_hcd
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28069]: Warning: Configuration file /etc/laptop-mode/conf.d/board-specific/* is not readable, skipping.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28070]: Warning: Configuration file /etc/laptop-mode/conf.d/board-specific/* is not readable, skipping.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28083]: Determining power state from /sys/class/power_supply/ADP1/online.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28084]: Determining power state from /sys/class/power_supply/ADP1/online.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28090]: Not trying other options, already found a power supply.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28089]: Not trying other options, already found a power supply.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28106]: Battery level polling is disabled.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28110]: Battery level polling is disabled.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28111]: Prelim lock acquisition on descriptor 8 with pid 28062
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28113]: Couldn't acquire prelim lock on descriptor 8 with pid 28064
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28116]: Prelim lock acquisition on descriptor 9 with pid 28062
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28118]: Now invoking lmt_main_function with arguments -- force
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28119]: Couldn't acquire prelim lock on descriptor 9 with pid 28064
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28121]: Now invoking lock_retry with arguments -- force
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28124]: On battery power: Activating, because ENABLE_LAPTOP_MODE_ON_BATTERY is set.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28127]: Not on AC and we have battery information in /sys/class/power_supply/BAT* -- checking minimum battery charge.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28129]: /sys/class/power_supply/ADP1 is of type Mains.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28130]: Not of type "Battery", skipping.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28132]: /sys/class/power_supply/BAT0 is of type Battery.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28133]: Checking levels for /sys/class/power_supply/BAT0.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28135]: Present: 1.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28137]: Remaining charge: 2076000
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28139]: Full capacity: 5591000
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28141]: Laptop mode
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28142]: Checking if desired state is different from current state.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28144]: enabled, active
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28145]: Module /usr/share/laptop-mode-tools/modules/ac97-powersave is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28146]: Module /usr/share/laptop-mode-tools/modules/battery-level-polling is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28147]: Module /usr/share/laptop-mode-tools/modules/bluetooth is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28148]: Module /usr/share/laptop-mode-tools/modules/configuration-file-control is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28149]: Module /usr/share/laptop-mode-tools/modules/cpufreq is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28150]: Module /usr/share/laptop-mode-tools/modules/dpms-standby is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28151]: Module /usr/share/laptop-mode-tools/modules/eee-superhe is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28152]: Module /usr/share/laptop-mode-tools/modules/ethernet is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28153]: Module /usr/share/laptop-mode-tools/modules/exec-commands is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28154]: Module /usr/share/laptop-mode-tools/modules/hal-polling is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28155]: Module /usr/share/laptop-mode-tools/modules/hdparm is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28156]: Module /usr/share/laptop-mode-tools/modules/intel-hda-powersave is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28157]: Module /usr/share/laptop-mode-tools/modules/intel-sata-powermgmt is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28158]: Module /usr/share/laptop-mode-tools/modules/laptop-mode is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28159]: Module /usr/share/laptop-mode-tools/modules/lcd-brightness is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28160]: Module /usr/share/laptop-mode-tools/modules/nmi-watchdog is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28161]: Module /usr/share/laptop-mode-tools/modules/runtime-pm is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28162]: Module /usr/share/laptop-mode-tools/modules/sched-mc-power-savings is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28163]: Module /usr/share/laptop-mode-tools/modules/sched-smt-power-savings is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28164]: Module /usr/share/laptop-mode-tools/modules/start-stop-programs is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28165]: Module /usr/share/laptop-mode-tools/modules/syslog-conf is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28166]: Module /usr/share/laptop-mode-tools/modules/terminal-blanking is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28167]: Invoking module /usr/share/laptop-mode-tools/modules/usb-autosuspend.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28179]: Enabling autosuspend mode for USBCORE Controller, with timeout 2.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28180]: Module /usr/share/laptop-mode-tools/modules/video-out is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28183]: Module /usr/share/laptop-mode-tools/modules/wireless-ipw-power is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28185]: Module /usr/share/laptop-mode-tools/modules/wireless-iwl-power is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28187]: Module /usr/share/laptop-mode-tools/modules/wireless-power is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28188]: Module /usr/local/lib/laptop-mode-tools/modules/* is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28190]: Module /usr/local/share/laptop-mode-tools/modules/* is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28189]: Enabling auto suspend mode for usb device 1-1.2.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28191]: Module /etc/laptop-mode/modules/* is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28192]: Enabling auto power level for usb device 1-1.2.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28195]: On battery power: Activating, because ENABLE_LAPTOP_MODE_ON_BATTERY is set.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28197]: Not on AC and we have battery information in /sys/class/power_supply/BAT* -- checking minimum battery charge.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28199]: /sys/class/power_supply/ADP1 is of type Mains.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28200]: Not of type "Battery", skipping.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28202]: /sys/class/power_supply/BAT0 is of type Battery.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28203]: Checking levels for /sys/class/power_supply/BAT0.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28205]: Present: 1.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28207]: Remaining charge: 2076000
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28209]: Full capacity: 5591000
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28211]: Laptop mode
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28212]: Checking if desired state is different from current state.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28213]: enabled, active
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28214]: Module /usr/share/laptop-mode-tools/modules/ac97-powersave is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28215]: Module /usr/share/laptop-mode-tools/modules/battery-level-polling is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28216]: Module /usr/share/laptop-mode-tools/modules/bluetooth is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28217]: Module /usr/share/laptop-mode-tools/modules/configuration-file-control is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28218]: Module /usr/share/laptop-mode-tools/modules/cpufreq is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28219]: Module /usr/share/laptop-mode-tools/modules/dpms-standby is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28220]: Module /usr/share/laptop-mode-tools/modules/eee-superhe is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28221]: Module /usr/share/laptop-mode-tools/modules/ethernet is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28223]: Module /usr/share/laptop-mode-tools/modules/exec-commands is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28224]: Module /usr/share/laptop-mode-tools/modules/hal-polling is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28225]: Module /usr/share/laptop-mode-tools/modules/hdparm is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28226]: Module /usr/share/laptop-mode-tools/modules/intel-hda-powersave is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28227]: Module /usr/share/laptop-mode-tools/modules/intel-sata-powermgmt is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28228]: Module /usr/share/laptop-mode-tools/modules/laptop-mode is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28229]: Module /usr/share/laptop-mode-tools/modules/lcd-brightness is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28230]: Module /usr/share/laptop-mode-tools/modules/nmi-watchdog is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28231]: Module /usr/share/laptop-mode-tools/modules/runtime-pm is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28232]: Module /usr/share/laptop-mode-tools/modules/sched-mc-power-savings is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28233]: Module /usr/share/laptop-mode-tools/modules/sched-smt-power-savings is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28234]: Module /usr/share/laptop-mode-tools/modules/start-stop-programs is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28235]: Module /usr/share/laptop-mode-tools/modules/syslog-conf is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28236]: Module /usr/share/laptop-mode-tools/modules/terminal-blanking is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28237]: Invoking module /usr/share/laptop-mode-tools/modules/usb-autosuspend.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28245]: Enabling autosuspend mode for USBCORE Controller, with timeout 2.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28254]: Module /usr/share/laptop-mode-tools/modules/video-out is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28255]: Not enabling auto suspend mode for usb device 1-1.2:1.0
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28256]: Not enabling auto power level for usb device 1-1.2:1.0
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28257]: Module /usr/share/laptop-mode-tools/modules/wireless-ipw-power is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28258]: Module /usr/share/laptop-mode-tools/modules/wireless-iwl-power is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28259]: Module /usr/share/laptop-mode-tools/modules/wireless-power is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28260]: Module /usr/local/lib/laptop-mode-tools/modules/* is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28261]: Module /usr/local/share/laptop-mode-tools/modules/* is not executable or is to be skipped.
    Feb 05 17:31:25 ryan-linux-desktop laptop-mode[28262]: Module /etc/laptop-mode/modules/* is not executable or is to be skipped.
    Feb 05 17:31:41 ryan-linux-desktop kernel: ehci_hcd 0000:00:1d.0: setting latency timer to 64
    Feb 05 17:31:41 ryan-linux-desktop kernel: ehci_hcd 0000:00:1d.0: setting latency timer to 64
    Feb 05 17:31:41 ryan-linux-desktop kernel: ehci_hcd 0000:00:1d.0: remove, state 4
    Feb 05 17:31:41 ryan-linux-desktop kernel: usb usb2: USB disconnect, device number 1
    Feb 05 17:31:41 ryan-linux-desktop kernel: usb 2-1: USB disconnect, device number 2
    Feb 05 17:31:41 ryan-linux-desktop kernel: ehci_hcd 0000:00:1d.0: USB bus 2 deregistered
    Feb 05 17:31:41 ryan-linux-desktop kernel: ehci_hcd 0000:00:1a.0: setting latency timer to 64
    Feb 05 17:31:41 ryan-linux-desktop kernel: ehci_hcd 0000:00:1a.0: setting latency timer to 64
    Feb 05 17:31:41 ryan-linux-desktop kernel: ehci_hcd 0000:00:1a.0: remove, state 4
    Feb 05 17:31:41 ryan-linux-desktop kernel: usb usb1: USB disconnect, device number 1
    Feb 05 17:31:41 ryan-linux-desktop kernel: usb 1-1: USB disconnect, device number 2
    Feb 05 17:31:41 ryan-linux-desktop kernel: usb 1-1.1: USB disconnect, device number 3
    Feb 05 17:31:41 ryan-linux-desktop kernel: usb 1-1.2: USB disconnect, device number 6
    Feb 05 17:31:41 ryan-linux-desktop kernel: usb 1-1.3: USB disconnect, device number 4
    Feb 05 17:31:41 ryan-linux-desktop kernel: ehci_hcd 0000:00:1a.0: USB bus 1 deregistered
    Feb 05 17:34:03 ryan-linux-desktop kernel: CPU3: Package power limit notification (total events = 81)
    Feb 05 17:34:03 ryan-linux-desktop kernel: CPU1: Package power limit notification (total events = 81)
    Feb 05 17:34:03 ryan-linux-desktop kernel: CPU2: Package power limit notification (total events = 81)
    Feb 05 17:34:03 ryan-linux-desktop kernel: CPU0: Package power limit notification (total events = 81)
    Feb 05 17:34:03 ryan-linux-desktop kernel: CPU1: Package power limit normal
    Feb 05 17:34:03 ryan-linux-desktop kernel: CPU2: Package power limit normal
    Feb 05 17:34:03 ryan-linux-desktop kernel: CPU3: Package power limit normal
    Feb 05 17:34:03 ryan-linux-desktop kernel: CPU0: Package power limit normal
    Feb 05 17:37:56 ryan-linux-desktop sudo[31776]: root : TTY=pts/2 ; PWD=/home/ryanvade ; USER=root ; COMMAND=/sbin/modprobe -r xhci_hcd
    Feb 05 17:37:56 ryan-linux-desktop sudo[31776]: pam_unix(sudo:session): session opened for user root by ryanvade(uid=0)
    Feb 05 17:37:56 ryan-linux-desktop sudo[31776]: pam_unix(sudo:session): session closed for user root
    Feb 05 17:37:59 ryan-linux-desktop sudo[31810]: root : TTY=pts/2 ; PWD=/home/ryanvade ; USER=root ; COMMAND=/sbin/modprobe xhci_hcd
    Feb 05 17:37:59 ryan-linux-desktop sudo[31810]: pam_unix(sudo:session): session opened for user root by ryanvade(uid=0)
    Feb 05 17:37:59 ryan-linux-desktop sudo[31810]: pam_unix(sudo:session): session closed for user root
    Feb 05 17:44:12 ryan-linux-desktop kernel: CPU1: Package power limit notification (total events = 125)
    Feb 05 17:44:12 ryan-linux-desktop kernel: CPU0: Package power limit notification (total events = 125)
    Feb 05 17:44:12 ryan-linux-desktop kernel: CPU2: Package power limit notification (total events = 125)
    Feb 05 17:44:12 ryan-linux-desktop kernel: CPU3: Package power limit notification (total events = 125)
    Feb 05 17:44:12 ryan-linux-desktop kernel: CPU1: Package power limit normal
    Feb 05 17:44:12 ryan-linux-desktop kernel: CPU3: Package power limit normal
    Feb 05 17:44:12 ryan-linux-desktop kernel: CPU2: Package power limit normal
    Feb 05 17:44:12 ryan-linux-desktop kernel: CPU0: Package power limit normal
    A new kernel was just installed via pacman.  I haven't booted it yet.  Maybe that will fix it?
    EDIT: This is happening with kernel 3.7.6-1-ARCH.  Especially after the computer goes to sleep.
    Last edited by ryanvade (2013-02-21 22:51:29)

    Well 2.0 ports work now.
    3.0 works for a few seconds, then stops.
    [ 302.762355] xhci_hcd 0000:00:14.0: setting latency timer to 64
    [ 302.762468] xhci_hcd 0000:00:14.0: remove, state 84
    [ 302.775661] usb usb4: USB disconnect, device number 1
    [ 302.776021] xHCI xhci_drop_endpoint called for root hub
    [ 302.776030] xHCI xhci_check_bandwidth called for root hub
    [ 302.776377] xhci_hcd 0000:00:14.0: USB bus 4 deregistered
    [ 302.776396] xhci_hcd 0000:00:14.0: remove, state 1
    [ 302.878776] hub 3-0:1.0: activate --> -108
    [ 302.878841] usb usb3: USB disconnect, device number 1
    [ 302.879119] xHCI xhci_drop_endpoint called for root hub
    [ 302.879124] xHCI xhci_check_bandwidth called for root hub
    [ 302.879533] xhci_hcd 0000:00:14.0: USB bus 3 deregistered
    [ 314.069077] xhci_hcd 0000:00:14.0: setting latency timer to 64
    [ 314.069093] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 314.069116] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 314.069277] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 314.069304] xhci_hcd 0000:00:14.0: irq 21, io mem 0x74600000
    [ 314.069409] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
    [ 314.069910] xHCI xhci_add_endpoint called for root hub
    [ 314.069919] xHCI xhci_check_bandwidth called for root hub
    [ 314.070031] hub 3-0:1.0: USB hub found
    [ 314.070051] hub 3-0:1.0: 4 ports detected
    [ 314.080764] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 314.080774] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 314.081037] xHCI xhci_add_endpoint called for root hub
    [ 314.081040] xHCI xhci_check_bandwidth called for root hub
    [ 314.081089] hub 4-0:1.0: USB hub found
    [ 314.081099] hub 4-0:1.0: 4 ports detected
    [ 314.430506] usb 3-4: new low-speed USB device number 2 using xhci_hcd
    [ 314.450307] usb 3-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 314.450325] usb 3-4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 314.454047] input: GE 98134 GE 98134 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input20
    [ 314.454371] hid-generic 0003:05B8:3155.0007: input,hidraw0: USB HID v1.00 Keyboard [GE 98134 GE 98134] on usb-0000:00:14.0-4/input0
    [ 314.459555] input: GE 98134 GE 98134 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/input/input21
    [ 314.460089] hid-generic 0003:05B8:3155.0008: input,hiddev0,hidraw1: USB HID v1.00 Mouse [GE 98134 GE 98134] on usb-0000:00:14.0-4/input1
    [ 341.130120] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 1 ep 0 with no TDs queued?
    Something else I noticed was that when I unplug the power cable to my laptop, the USB 3.0 stops and I get this in dmesg right after:
    [ 609.467318] EXT4-fs (sda6): re-mounted. Opts: data=ordered,commit=600
    [ 609.485639] EXT4-fs (sda5): re-mounted. Opts: data=ordered,commit=600
    [ 609.988234] EXT4-fs (sda6): re-mounted. Opts: data=ordered,commit=600
    [ 610.072949] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 2 ep 0 with no TDs queued?
    [ 610.097739] EXT4-fs (sda5): re-mounted. Opts: data=ordered,commit=600
    [ 610.664363] EXT4-fs (sda6): re-mounted. Opts: data=ordered,commit=600
    [ 610.737512] EXT4-fs (sda5): re-mounted. Opts: data=ordered,commit=600
    *NOTE is it possible to install the 3.8-rc kernel through yaourt? I have tried to compile it myself using old config and it never works.  EVER.
    Last edited by ryanvade (2013-02-10 06:27:42)

  • My usb ports have stopped working on my iMac

    2 of the 4 USB ports on my imac have stopped working. Has anyone else had the same problem? Anyone know how to get them working again?
    Thanks
    Pammac1

    Hopefully the SMC reset works otherwise it may be a Logic Board issue.
    SMC RESET
    http://support.apple.com/kb/HT3964
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    The 5 second timing is important to a successful reset.
    PRAM RESET
    Zap the PRAM
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • USB ports have stopped working on my 975 power up platinum

    For some reason the usb ports on the mb & the front of the case antec p160 have stopped working, I have not added anything new or removed anything, the firewire ports are still working though. I have tried removing the usb root hub  restarting the pc and letting windows reinstall the driversbut it does not make any difference. Does any one have any idea what the problem my be.

    He means what is in the thread labled "If you're having problems with USB ports, read on...  "
    The USB issue has followed several boards. Here is a quote from a post I've made on the subjetct.
    Quote from: Frankeputer
    Check to see if there is a wire running from your Front USB ports to the #10 slot of your USB block which connects to the motherboard header.
    USB connector block layout which corresponds to the pin layout on boards with the Intel spec for USB. Do not cut the pin on the MOBO. You are removing/cutting the wire to the connector block from the case.
    2 4 6 8 10(this wire, #10, not needed)     
    1 3 5 7 9(filled/key)
    If you find a wire leading to the #10 spot on the block, remove that wire. My block has tabs so that you can pull the wire out, or you could snip/cut the wire leading to that position--if you cut the wire, be careful to cut the correct one and cut it in such a way that it may be repaired if you make a mistake.  Make sure you wrap the wire, the exposed end/s, you remove/cut with electrical tape so as not to accidentally cause a short. I actually folded the wire back and wrapped it.
    2 posts to read--Here and Here.
    This seems to be a common issue involving many different case manufacturers. I don't know how it applies to other MOBO manufacturers, but in these forums it is not limited to a specific MSI model or supported chipset(Intel or AMD).

  • Could both of my USB ports have stopped working at once?

    Before today, I have repeatedly connected my printer and camera to my MacBook Pro. But today nothing has worked through either USB port: not a Seagate external hard drive, not the printer, and not my camera. Could something have gone wrong with the ports all of the sudden? Can I do anything other than send it in for repair?
    MacBook Pro   Mac OS X (10.4.6)  

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • My apple issued iPhone5 certified USB cord randomly stopped working/charging with iOS7.  Help!

    I've had iOS7 installed on my iPhone5 since it was originally released and as of last week, the certified cord that came with my phone is no longer recognized.  We've no aftermarket cables in our posession, yet I was able to get the phone charged using a coworker's aftermarket cable - strange.  I've tried resetting the phone, plugging it into my mac, windows laptop and the wall outlet with only one successful charge coming from the windows machine, interestingly enough.  I'm almost out of juice on the phone - has anyone else solved this problem?  I'm at a loss.
    Any guidance is greatly appreciated!

    If you were attempting to update then it means it was not applied properly. Otherwise, there was something in the environment that caused it to go into recovery mode.
    You will need a micro usb cord to restore via iTunes. Most have one lying around, or they can be had for cheap. The other option is to take it to Apple and have them restore it.
    Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support

  • USB ports don't work - 880GMS

    http://
    HELP ME
    My usb ports work fine until Sunday, I restart the W8 OS and they don't work (my last activity was configure a router but I didn't install anything). I've two OS (W8 and Ubuntu 11.1) and I tried all and my USB ports don't work. I don't have any idea about the cause of the problem. All work fine except my USB ports. They are enable according to the BIOS but the OS (W8, W7 or Ubuntu) doesn't recognize any device.
    I tried this things:
    - Change my porwer supply
    - Restart the BIOS to the Fail-Safe and Optimal value default
    - Clear the CMOS (Changing the jumper and remove the battery)
    - Remove the W8 and install W7
    - Remove W7 and install Ubuntu 11.04
    - Flash the BIOS to the last update (it's the same that was loaded in the BIOS)
    Currently, I don't know what I must do it. I'm really disappointed with this board (MSI 880GMS-E35). This is my second problem with these model. Previously, I've one and it didn't supply the energy to start the proccesor (Phenon X4 955). My actual board works fine until Sunday.
    Please help me to solve the problem.

    OK, I have no idea but fortunately my usb ports work fine now.
    I don't know how to fix the problem. But I can assure that thanks to Ubuntu it's fixed. My last two operations were:
    - Flash the BIOS
    - Check lsusb
    Yesterday, I'm full disappointed and I was going to prepare my hard discussion with my provider when suddenly I found a this post:
    http://askubuntu.com/questions/69594/my-usb-ports-randomly-stop-working-till-a-reboot
    But before to enter the command in the Ubuntu's console, I saw that my USB devices work. It's amazing!!! I'm a newer electronic engineer and I saw events similar that this more than once time in my labs (Typical student experiences).
    If anyone has the same problem, I could recommend:
    - Check BIOS usb options
    If these are ok, else enable the propertly options
    - Check # lsusb (In Linux)
    If your ports don't appear check the PSU (Maybe there are others things that you should check) else
    - Check # dmesg | tail (Before and after to connect a usb device)
    If there is an error saw in forums, maybe it's the common problem so far (Incompatibility in the kernel -error hci-)
    - Type # acpi = force irqpoll
    ELSE
    - Flash the bios as show in this forum
    ACLARATION: I think that this algorithm might help you but I don't prove this. It's your responsible to do that. I only write the items that I learn with this issue.
    CONCLUSION: I don't wish that anyone has this problem. I lost one week trying to solve it.
    POST RELATED TO USB DON'T WORK CAUSE PROBLEM (ABOUT dmesg and interpretation)
    https://bbs.archlinux.org/viewtopic.php?id=102553
    POST RELATED TO FLASH THE BIOS
    https://forum-en.msi.com/index.php?PHPSESSID=0uaa1psa1gln707een5uu6sb16&topic=138659.0

  • My Toshiba Satellite A660 USB ports don't work and the webcam doesn't either.

    For some odd reason all my USB ports doesn't work. It worked fine with I got it and this laptop is pretty much new. I also tried to uninstall and install the USB device back but I always get an error saying it didn't work. Any solutions to fix this?
    Also, my webcam doesn't work. Every time I log into my laptop I always get this error saying "Web camera initialization failed. Please check your camera device and restart application or computer." I have no idea how to fix this. Can anyone help me out please?

    For your USB ports, try this one first..
    1. Make sure that the power light is off.
    2. Unplug you AC adapter form your laptop then remove the battery.
    3. Without those two, hold down the power button for 10 seconds then release it. After that put the battery and the AC adapter in.
    4. Turn NB on and just choose start windows normally.
    This is the simplest thing that you can do. Basically, the reason behind this is because it will reset the microprocessor on your system board. Try this first then if it failed check these links:
    USB port may stop working after you remove or insert a USB device
    Tips for solving problems with USB devices
    For your webcam, you said it is giving out a message "Web camera initialization failed. Please check your camera device and restart application or computer.", that means the application is not installed properly. You only need to uninstall it first from Start > Control Panel > Programs and Features (make sure that view should be in large icons) then look for the Web Camera Application (looking at your laptop model I assume it's Toshiba Camera Application) then uninstall it. To reinstall it back, pull up the Toshiba Application Installer by going to Start then type in Toshiba Application Installer. Once you got it pulled up, click on Next Button and look for the application that has a name webcamera from the list and install it.

  • When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone.  This previously worked, but has randomly stopped working, help!

    When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone.  This previously worked, but has randomly stopped working. help!

    I took my iPhone to the Service center of M/s RSG INFOTECH PRIVATE LIMITED on April 17, 2014.
    Why are you posting in this forum about what occured with an independent service provider?  How is is at all relevant to Apple??  In fact, service by any person or business not authorized by Apple voids any waranty.

  • The Audio randomly stops working for no reason.

    Half way through the finished video, the audio just cuts out and sometimes plays the audio from other videos over it.
    I've tried making a completely new video, but it does exactly the same thing. What is wrong?

    ThunderRhapsody wrote:
    Hp Premium Digital Headset
    Model No: HUD-02
    HP P/N: XA490AA
    Windows 7 Ultimate 64-bit
    I plug in my headset and if i press  the mute mic button, a blue light comes on telling me that headset "is" working. I can press this as much as I want, the blue light will just go on and off. all good.
    I then go to speaker button on taskbar and set HP headset as default. If I had left the mutemic on, the light will now go out. no sound will play from my speakers.
    When I click "► Test"
    an Error! message appears saying "Failed to play test tone."
    My headset has worked previously and sometimes it does work. My efforts to fix the problem seem to be futile and it is a random chance that it will work.
    I have tried every USB port on my PC, I have tried updating but it says "The best driver  software for your device is already installed"
    As I was typing this I decided to plug it into all my USB ports again and uninstall it from any that do not work, then reboot my PC and try reinstalling it.
    While doing this, I encountered this message from Device Manager "This device cannot start. (Code 10)" Updating the driver did not help so I will be uninstalling it from that port.
    For one of the USB ports, the first time I tested it, it seemed crackly, I tested it again and the test tone suddenly fails to play.
    After restarting, I plugged my headset into my favourite USB port and tested "Failed to play test tone."
    I plugged it into the next one down. Crackly noises ensued so I ran the test once more. "Failed to play test tone."
    I have got it working in one so I will leave it at that until it that ones stops. The USB port which it works in, was one that it worked in before uninstalling and rebooting.
    My problem still remains so if I could have any help, that would be great.
    also I am still under warranty so what can I do about that?

  • My Macbook Pro USB port is not working please help

    Please help..
    My usb port has been working perfectly until one day it just stopped working, does anyone know how to help me?

    Bring it to an Apple store or AASP.

  • MacBook Pro closest to the screen USB port doesn't work

    Hey there!
    I have a mid-2010 MacBook Pro 6,2 (15" 2,66 GHz i7 4GB RAM) which is in perfect conditions. I use it everyday to study and play the X-Plane simulator, basically, so it has never fallen nor taken any damage. Last week, all of the sudden, the USB port located closest to the screen stopped working. I've spent several hours trying to figure out what the problem is (tried the SMC and NVRAM reset more than once) but all I got was this log from USB Prober:
    Feb 12 21:46:26.196  [2]
    BRCM2070 Hub[0xffffff800bcc0c00]::DeviceRequest _DeviceRequestWithTimeout runAction() failed (0xe00002ed)
    Feb 12 21:46:26.197  [3]
    IOUSBDeviceUserClientV2[0xffffff80151f7200]::DeviceRequestIn (sync < 4k) err:0xe00002ed (device is not responding)
    Feb 12 21:46:26.197  [3]
    IOUSBDeviceUserClientV2[0xffffff80151f7200]::DeviceRequestIn < 4K to 0xffffff800bcc0c00 - returning err e00002ed, size: 0
    I imagine that the problem is in the BRCM2070 Hub, as it's status in the "Port Status" section is "STATUS(change): CONNECT ENABLE SUSPEND POWER Full Speed" and "Port Power State: Suspended (Driver)", while my other USB port which is working okay is "STATUS(change): POWER Full Speed" and "Port Power State: No connection". If I connect anything to the problematic USB Port the status won't change, while, if connected to the okay one, it will show what's connected instead of saying "No Connection" (e.g. iPhone). The only thing that gives a sign of life when connected to the problematic one is my Samsung External 500GB HD, but it simply lights up, doesn't mount nor is recognised. After a minute it turns off while still connected. I don't know how to proceed as I don't have any Apple Stores near me.
    Is there anyway to work this problem out or I should just wait until the end of this year to go to the US and take my machine to a Genius? This problem is really annoying me, as I frequently use one of the ports to charge my iPhone and the other one to connect my mouse. I'm thinking about buying an USB hub to bypass the problem, but it would kill my MBP's portability.

    I solved my issue and I believe it was router related. I have a router through Verizon and their Fios service. My router was old so I caled for a replacement. when I received thereplacement I switched it the router to only accept 802.11n and this did the trick. Problem solved, stupid router.

  • E2000 Port Forwarding Stops Working

    I am using port forwarding for running a webserver. All is working fine. After a random number of hours or days, the port forwarding stops working. I can get in and look at the settings and they are correct. I can then change something on the port forwarding screen and resave it and it starts working again.  Do I have a bad unit ?

    Webserver might not be set to static IP. Try setting the webserver to static IP first, then make sure that static IP is enabled in the Port Forwarding screen of the router's web-based setup page. Also, protocol should be set to BOTH (TCP-UDP). You can also try having less firewall/AV restrictions on the web server (or none at all) and set MTU to 1400.

Maybe you are looking for