USB Power Error Message When Connecting NANO

Windows XP Pro on desktop computer gave an error message that the USB port power too high or something to that effect. This has happened three times with Nano. Purchased the Nano only two days ago. I also connected the Nano to my Windows laptop to charge and it bucked the laptop battery and shut it down. Is this normal? Should I just return the Nano?

Normally the error you get is about the port not having enough power, so I don't know how it could be too high. Not sure what you mean by "bucked the battery" either, but it doesn't sound good. If it were me, I'd consider swapping the iPod for a new one to see if it's defective.

Similar Messages

Error message when connecting Nano to computer - please help!

I just started getting an error message when I try to disconnect my Ipod Nano from my computer after it's done charging/updating. The message tells me the device can't be stopped because other programs are utilizing files on my nano.
I tried restarting my computer, but it froze. It's happened twice now and I have had to disconnect it when it says not to. Please help!

I have been ejecting it. This problem only began recently. I read through about 30 pages of this forum and found someone postoing about the same problem. They said it may be McAfee Viruscan in the background.I'll check that out.

Error message when connecting to iTunes says my new iPad 4 can't be connected as it requires version 10.7 or later. Surely a new iPad already has the latest version, and if it doesn't how do I get it?

Error message when connecting to iTunes says my new iPad 4 can't be connected as it requires version 10.7 or later. Surely a new iPad already has the latest version, and if it doesn't how do I get it?

Not the iPad - your computer must be running iTunes 10.7 in order to sync. It has nothing to do with iTunes on the iPad.
You can download iTunes for your computer here.
http://www.apple.com/itunes/

Error message when connecting to Itunes

Keep getting this error message when connecting.
[IMG]http://img813.imageshack.us/img813/2214/ipod.png[/IMG]
I have uninstalled and reinstalled twice now.
Its an Ipod Touch 8GB with front and back camera.
Thanks

If pic doesnt work it says
"This Ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install Itunes again."

Getting error message when connecting to public wi-fi, why?

Getting error message when connecting to public wi-fi, why?

What error message?
Are you sure that the network is really public?

Error message when connecting 80GB Video iPod

I'm getting this error message when trying to connect my 80GB Video iPod:
"The iPod (name) cannot be synced. An unknown error occurred (-48)."
Never seen this one before.
I haven't synced this iPod for a few weeks but it always behaved fine before, taking a few seconds to appear in iTunes (v7.5) then syncing perfectly when I hit the Sync button (I have it set to manually sync only because sometimes I want to change the contents or only sync music).
Before syncing on this occasion, I did an iPod software update via iTunes - iTunes said there was a newer version (1.2.3). After the update, I disconnected the iPod for a few minutes (somehting I wanted to check content before syncing), then reconnected it. At first iPod took about a minute to show up in iTunes - way too long. I Reset the iPod and tried again but still LONG delay to appear in iTunes (again about 1 minute). I did another Reset - same result. Then I did a complete Restore, after which syncing to restore the contents gave problems - it refused to finish the sync. I had to disconnect and start again, syncing the data one section per sync session - Contacts, music, videos, iCal - which seemed to work fine. Then I disconnected, waited a few minutes then reconnected the iPod to check. It wouldn't connect at all. Did a Reset, tried o connect again and it did connect but then proceeded to resync all my contacts taking almost 30 minutes (way too long) to do so (I had made NO changes in Address Book since that data was put in there). I tried to reconnect again but then got the error message (above). Did another total Restore and the same shenannigans happened. Now, I have an iPod with data on it and works fine, but iTunes won't recognise it - just gives this error message every time.
By the way, my 8GB Nano (software 1.1.3) seems to sync fine on the same system, same computer.
Could this be the 1.2.3 iPod software giving issues? I appreciate any help because I also use this iPod for recording for my work, which getting a little urgent now.
Many thanks.

Thanks Zevoneer, but no real success. I did all that but when I tried to sync after it, it got partially through the sync (about 10% I'd guess) and presented an error message saying that the disk couldn't be read form or written to (sorry but I forgot the error number). I disconnected the iPod, waited a few minutes then reconnected and again got the message but then the ipod continued to finish the sync, even though almost all of the music and 2 of my 4 videos didn't go over to the iPod. I'm now thinking that this just isn't satisfactory reliability from the device since I use it a lot in my work and rely on it. But this new iPod is only a few months old, had very little use and only made about 12 recordings - In comparison, I've used the Nano heaps but now want to move over to the bigger one, basically for more capacity and bigger screen for video. I wonder if it's a hard drive failure in this iPod?
null

Error message when connecting external hdd.....NTFS 3G error.

Im receiving the following error message when trying to connect a Clickfree portable hdd.
I am also recieving the message when connecting a WD portable hdd that was previously working
before installing the Clickfree hdd.....
NTFS-3G
Could not mount /dev/disk2s1 at volumes/CF storage because
the following problems occurred.
/Library/Filesystems/fusefs.fs/support/fusefs.kext failed to load (libkern/kext) link error
Check the sys kernal logs for errors or try kextutil (8). The MacFuse file sys is not available (71)"
I am trying to install it on a mac OS X 10.6.8
Can anyone help please?
thanks

Regarding uninstalling, this is from the FAQ on the MacFuse site (http://code.google.com/p/macfuse/wiki/FAQ):
Q 2.3. How can I uninstall MacFUSE?
A: Launch the Mac OS X System Preferences application and go to the MacFUSE preference pane. Click on the "Remove MacFUSE" button. This will uninstall all MacFUSE components except the preference pane itself.
You can keep the MacFUSE preference pane around should you decide to install MacFUSE again in the future. If you do wish to remove it, you do it just like how you would remove any other non-Apple preference pane: In System Preferences, control-click (right-click) on the MacFUSE icon and you will see "Remove ..." as an action.
Only if you had the "Show Beta Versions" button checked in the MacFUSE prefpane, you'll have a property list (plist) file remaining at this point:/Library/Preferences/com.google.macfuse.plist. To remove it, you should uncheck the button before you remove the prefpane as described above.
Note that an official (correct) MacFUSE installation will have a preference pane if you have MacFUSE 2.0 or later installed. If you have an older version of MacFUSE, you can uninstall as follows.
The other thing you can do if you're having problems is go into System Preferences and there should be an icon for MacFuse. By going into that there may be an option to disable it. If so, do that first before attempting to uninstall and try mounting your drives again.

Error message when connecting to I Tunes

I am getting an error message when I connect to ITUNES that says I do not have anymore capacity for more songs. I have a mini and only have 300 songs on it. Any ideas? It still says I have 2.9GB avialable on MINI. Any help would be appreciated...

BTT

Ipod error message when connected. Please help

Windows XP
I have had my 30 gigabyte ipod for almost a year and i've never had any problems with it before. But recently our area wasn't able to get broadband. So i was unable to download the recent ipod and itunes updates. I have done that now.. but i think something has affected my ipod. When i plug it into my computer nothing comes up on my ipod screen and i can continue browsing music etc.. i know this isn't supposed to happen. And on my computer an error message comes up saying "USB device not recognized. One of the USB devices attached to this computer has malfunctioned, and Windows does not recognise it. "
Please help me!

Okay. So i'll tell you the steps i have taken. I've uninstalled all the ipod updaters i had on my computer, eg 2006 and 2005.. and i reinstalled the latest version of itunes. I also went to device manager and all that but it only came up in the list at "unknown device" and i uninstalled the driver and tried to reinstall it but it came up saying it was an unknown device again. I tried right clicking on it and going "scan for hardware updates" but it told me the one i have installed is the nearest match. I also tried connecting my ipod to my computer in disc mode which did nothing. But i have discovered my ipod charges when i plug it in.. but the computer freezes on the black dos screen (as it always has for me when i turn the computer on with the ipod plugged in) and the ipod remains charging. but it seems if i plug it in after windows has loaded it's not even recognised.
I'm sorry for making it so long but i really really need help

"Comm Error" message when connecting to car stereo

When connecting my 80G IPod to the port in my car, the IPod screen rolls horizontally, then says "OK to disconnect", and the stereo displays the "Comm Error" message. I was able to connect to the stereo before but don't know what happened to cause this. Re-setting the IPod did not resolve the problem. Has anyone else seen this? Please help!
5th Generation IPod Windows XP

I’ve got a 30gb ipod doing the same thing. I know it’s not the car as my friends nano works fine on it. Have you have any success?

ERROR MESSAGE WHEN CONNECTING IPOD TO PC

My ipod shuffle has been working fine for over one year. Yesterday I went to connect the ipod to the docking station on the PC to charge it and an error message stating "USB device not recognized" pops up. The Ipod doesn't open up when itunes is open and the computer does not recognize it at all. I tried different USB ports and the same problem occured. I reinstalled Itunes multiple times with no luck. I even tried the ipod reset utility program and nothing. PLEASE someone help, I am out of ideas and i dont know what to do, HELP!!

If you proceed you will lose all of your music. You weren't using Time Machine on your laptop?

ITunes sends error message when connecting iPod touch

I have an iPod touch 2nd generation, and I decided to reset it as it was having problems, and now it displays the connect to iTunes message like when I first purchased it. I connected it to iTunes like it wanted, but when I connect the iPod to iTunes, iTunes displays the following error message "iTunes could not connect to the iPod "iPod touch" because an unknown error occurred (0xE000001)". I am not an uninformed person on these matters and have tried everything I can think of i.e. updating iTunes, using a different dock connector etc. Any help would be greatly appreciated, thanks!

Hi Maxwell,
This is most likely a USB connection issue.
Make sure the iPhone is directly connected to a high-speed USB2 port on the computer, using the cable that came with it.
If the issue persists, try the general tips in this article: http://support.apple.com/kb/TS1286
-Jason

IPod Error Message when connected to the computer

When I have my iPod connected to my computer and listening to it's music through the computer, or even just updating songs onto my iPod, I always get an error message.
It doesn't really do anything, except it's just there and it's bugging me...On the bottom right of my computer where the time is- thats where the message pops up and it keeps on coming back every 10 minutes or so.
The message says-
iTunes.exe - Corrupt File
The file or directory /iPod_Control/iTunes/Temp File 1 is corrupt and unreadable. Please run the Chkdsk utility.
How would I go about fixing this, and what the hellll does it mean?????
Thanks in advance for the help

I've sort of figured out what the error message means- as in what it does to my iPod...
I am unable to add music to my iPod anymore. Anytime I connect my iPod to my computer and try to "safely remove it" with the eject thing, it says it is unable to because it is being files from my iPod Mini are being used by other files(I completely shut down all other music files and still received this message)...
So since I am unable to "safely remove the hardware", I have to do it without clicking the little eject iPod thing. When I do that, my iPod doesn't save any of the music I just put on it, and it comes out exactly the way it was before...
Any idea how to fix this, and how I got it???
And for some reason...My iPod keeps on telling me theres not enough room on it for any more songs when their is over 2.3 GBs left...
What issss going on here???

Error message when connecting to Windows

I have a newer Ipod, 4g, that Im trying to connect to Windows. I d/l the latest version of Itunes and installed but when I connect the Ipod, it says it has detected an Ipod in recovery mode and I will need to restore etc. I first did the restore and update as it said. It gave a message that it was successful but then the error message came back up. I looked online and it suggested I reset the Ipod itself, which I did but the message still comes up. Is there any fix to this or does it need to be sent in? The unit is just about new, no songs on it yet. It belongs to a friend of my daughter who asked me to put some songs on it for her.

I have the same problems. Also I sent my ipod to repair but nobody find anything. The only possibility to snyc is: Switching off pc, connect ipod with pc, starting pc and itunes and now I can sync. But after a while itunes comes up with the same error massage (recovery mode). I think some service from itunes or ipod does not start correct, but I do not know which one.
Has anybody an idea?

HP Photosmart D110 Series getting error message when connecting to web services

Hello guys!
Hope someone can help. We have a HP Photosmart D110 series that is a couple years old. I am trying to get it connected to the web services feature for my wife. When we first got the printer it connected with no problems. When I go and click on enable web services it tells me cannot connect to server. Same error message happens when I try to do a product update. I tried to change manual preferred to 8. 8. 8. 8. and manual alternate to 8. 8. 4. 4. with no luck.
Any help would be greatly appreciated!
Thanks!!!
Daniel

Hi Daniel, is there a chance that something has change in the intervening time in your home network e.g. a new router? This link contains a list of suggested troubleshooting steps to take if you're experiencing connectivity issues with HP Cloud Services. Try working down through them to isolate and correct the problem that is preventing you getting the D110 to connect to ePrint http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/ePrint-Apps-Connecti...
Post back with how you get on.
Best.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

USB Power Error Message When Connecting NANO

Similar Messages

Maybe you are looking for