USB printer doesn't print on Airport Extreme
I just purchased MacBook Pro & Airport Extreme (w/n). Got network all set up with printer connected to USB port on Airport. Configured as instructed, all looked good and worked, test page printed from both existing iMac and new MacBook. Now, a few days later nothing prints. And Airport Utility says there are no USB printers connected. Printer Utility says there are printers.
I'm moving to correct discussion board
Similar Messages
-
Help - Kodak 5300 printer doesn't work w/ Airport Extreme Base Station
Hi All,
Running a MacBook on OS 10.4.11 (airport extreme card) and an I-Book on 10.3.9 (airport card) - just bought an airport extreme base station and a Kodak 5300 all-in-one printer. Base station works fantastic with internet and both CPUs. Kodak printer works great when directly connected to laptops by USB. When printer connected to USB port on Base station it recognizes printer but wont print. Set-up printer with Bonjour settings - but printer won't print with WiFi. "Printer not responding" window appears. Have phoned Kodak support. They tell me the printer should work on Wi-fi but I should contact Apple. Have phoned Apple support - they're stumped. Kodak website recommends using a Silex wireless router with this printer and claims it is compatible - so it can handle wireless set-ups.
Has anyone out there had success with the Kodak 5300 and the Airport Extreme Base Station? It's a great printer that uses very little ink (inexpensive cartridge replacement). I really don't want to fall back on my old Epson.
Thanks for any thoughts/solutions.Hi Ron! Thanks for checking inside Kodak. I agree as a first printer from kodak it's a good one, and I certainly appreciate the attempt to buck the industry-standard of milking the customers on ink.
However, I'm not willing to go buy a silex device, when I already HAVE a device: the apple airport. I also got a reply from kodak support indicating that they didn't want to comment on future products, etc etc. Maybe I'm misreading this by assuming product == hardware, but I'm certainly not willing to ditch my current printer for a newer model for what I consider to be a DRIVER issue (I could be wrong of course). Maybe a firmware issue, but certainly not a hardware issue.
What I expect from Kodak is a new driver and/or firmware that would make this work with the apple airport. On the one hand I can understand not wanting to divulge company secrets and upcoming "products", but for a newer driver, I would expect to hear a "we're aware of the problem and are working on a fix". That would go MILES towards making me more patient and less irritated with Kodak. Telling me to wait for newer "products" or go buy a silex is a good way to loose customers.
So if you have any internal clout (or a message board), be sure to raise cain there for them to do the right thing.
jan
P.S. At the current time of writing, the silex website is not operational ("This site is temporarily unavailable. Please notify the System Administrator"). Way to go silex! -
I'm trying to setup a printer go wireless through my airport extreme, but every time I try to print the printing file gets paused. I'm in loop. PLEASE HELP! (The printer is a Brother 7020 monochrome)
I had the exact same problem
It turns out I was using a 20 foot USB cable between the printer and the Airport Extreme and the signal had become to weak to work. Try using nothing more than a 6 foot cable or try a new cable -
Can I print from my iPad using airport extreme?
Can I print from my iPad using airport extreme 802.11n ?
iOS devices use AirPrint to print directly to a printer. That would require a printer that is AirPrint-ready. Unfortunately, just connecting a non-AirPrint-ready printer to the USB or Ethernet ports of the AirPort Extreme Base Station (AEBS), will NOT enable it for AirPrint.
-
Old imac using snow leopard printed just fine to Ricoh cl2000n printer that is connected to airport extreme via ethernet (as was the imac). New iMac with Lion otherwise same cable configuration and the computer cannot find the printer. It searchs and spits out a generic error message. Any suggestions? Thanks!
Is your printer listed?
http://support.apple.com/kb/HT3669
If not then you need to get the driver and install it.
Otherwise you may want to reset the printing system.
http://support.apple.com/kb/ht1341 -
Scan doesn't find my Airport Extreme.
I replaced my laptop, downloaded the Airport software, but the scan function cannot find the router. I tried unplugging the Airport, waiting, and letting it restart. No luck. What do I do next?
How is your printer hooked up to the Airport Extreme?
Ethernet wire or plugged into the USB port?
Scanning does not work in the USB port, only printing....
Resolution
Note: AirPort Base Station and Time Capsule printer sharing is for printing only, not for printer utilities or other special features that may require a direct proprietary connection.
Also see this Apple doc:
http://support.apple.com/kb/TS1253 -
Adobe PDF printer doesn't print in Mac OS 10.5
Adobe PDF printer doesn't print in Mac OS 10.5
the printer stops automatically, and you can't make a pdf in this way
the Enfoocus software uses this PDF printer, to make certified pdf's
when will this problem solved?thnx!
that solves the problem
you also can give the file a name too again -
My EPSON printer doesn't print correctly the colors
Hi, I've an EPSON Stylus Photo R200 installed on my MacBook (OSX 10.4.11)... From some days, my printer doesn't print correctly the colors: I lunched the utility application and I saw that the printer doesn't print the "light magenta" (that's the light pink I think); that's strange, because his inkjet refill is not empty. I tried to do the clean process, but it don't start because there isn't enough ink in another two ink refill (yellow and light cyan, that aren't empty however).
Some ideas?
Message was edited by: Mac ShunsukeI have similar issue before and it's really frustrated to use small capacity cartridges in my R200 and R280 printers. I ended up to get a very very decent ink system from InkRepublic.com
these two systems have been working for me for few years and I never ever have to worry about the ink cost and printing problem.
There are couple of good reviews and workflow here
http://www.inkrepublic.com/members/MikeSokol/review.asp
http://www.brandonstaggs.com/epson-r200-continous-ink-system-review/
epson R1900 and R1800 ink system review
http://www.inkrepublic.com/members/MerrittIsland/review.asp
hope this helps. -
Can an encrypted USB drive be used with the Airport Extreme?
I would like to keep an encrypted USB drive hooked up to my Airport Extreme (A1354) so that I can use it for a hand archive of documents I might need to reference on the road or conveniently within my home, mainly because it would be handier than having to plug and unplug a USB device into whatever computer I'm using, and would allow my wife to do the same with her computer. I know most internet providers provide a service like this, but I figured why not just do this with my Airport Extreme?
I've read posts from people who have taken encrypted USB volumes generated from their MacBook Pro, and plug that USB device into the Airport Extreme. The Airport recognized the device exists, but it is you can't actually use it as an encrypted volume. This seems like a flaw on the part of Apple if you can't do this, as this device is a much more expensive solution that what most wireless routers provide.
Has anybody figured this one out?Doubtful it's going to work.
Does it see the same disk if it's formatted just Journaled (ie, not encrypted)?
The tehnical article isn't entirely clear . . . it just says Mac OS Extended: AirPort Extreme (802.11n) and Time Capsule: USB storage device supported formats and protocols
It was last modified June 14, 2011, a couple of weeks before Lion was released with the ability to encrypt drives.
Note that ExFAT is supported on Macs effective with 10.6.5, but not Airport Extremes; there's no reason to think encryption is any different. -
Airport Utility 5.6.1 doesn't see my Airport Extreme
I'm good with the Ethernet connection for the internet, but Airport doesn't see my Airport Extreme. It's connected to my IMac 10.6.8. Have tried a reset with ballpoint pen, but nothing happens. This all went crashing down the other evening with I suddenly had lost Internet on my MacBook Pro. This ***** so bad. Would it do me any good to call Apple support?
OS X 10.6.8 is Snow Leopard for which you need AirPort Utility 5.6.1.
There are no special techniques to download it. Just click on the link, then click the blue Download button, which will download and eventually deposit AirPort Utility 5.6.1 in your Downloads folder.
It looks like this:
Double-click it to extract the package installer. It looks like this:
Double-click that to open the installer:
Click Continue and follow the prompts, which will either install it in your Utilities folder or tell you a reason it cannot.
After you perform the "hard reset" and the Extreme's LED is blinking slowly, go to your Wi-Fi menu and see if you find a network called "Apple Network nnnnnn". Select it, then launch AirPort Utility.
The reason that everything is greyed out is that AirPort Utility cannot find any base stations to configure. If after doing all the above it still cannot, perform another "hard reset". If that does not work, perform a "factory defaults reset" as I explained above.
What happened at the Apple Store? Other than having a nice ballpoint pen with an Apple logo on it, they are not going to do anything more than you can do.
If you did not bring it there yet, bring your MacBook Pro along with you so that you can see for yourself how it ought to work. -
SERIOUSLY slow USB hard drive on the new Airport Extreme 802.11n
I have recently bought the new airport etreme 802.11n. Great little device, look wonderful on the office desk. I had some troubles getting it up and running on my machine but finaly got there in the end.
The USB hard drive is a great little addition that I was very excited about, untill I got it running. It is amazingly slow, for example I tried to copy a folder that contained 15 files which amounted to 135.6mb and it took 20 mins and 24 seconds to upload!
Is this just the speed that it should be uploading or is there somehting wrong with my settings.
I'm running on 3 bars of signal and the settings I'm using are:
connect with password (which is the same as the base stations password)
Automatically discover disks
Show in menu bar
If anyone knows the technical data for the transfer speeds and can confirm my queries I'd really appreciate it!
Thanks in advanceI have recently bought the new airport etreme
802.11n. Great little device, look wonderful on the
office desk. I had some troubles getting it up and
running on my machine but finaly got there in the
end.
The USB hard drive is a great little addition that I
was very excited about, untill I got it running. It
is amazingly slow, for example I tried to copy a
folder that contained 15 files which amounted to
135.6mb and it took 20 mins and 24 seconds to
upload!
Is this just the speed that it should be uploading or
is there somehting wrong with my settings.
I'm running on 3 bars of signal and the settings I'm
using are:
connect with password (which is the same as the base
stations password)
Automatically discover disks
Show in menu bar
If anyone knows the technical data for the transfer
speeds and can confirm my queries I'd really
appreciate it!
Thanks in advance
Does your drive meet these requirements?:
You can connect USB-based storage devices to an AirPort Extreme (802.11n). Learn which formats and protocols are supported.
The AirPort Extreme (802.11n) supports USB storage devices that have a block size of 512 bytes, and are formatted as Mac OS Extended (HFS-plus), FAT16, or FAT32. Not all USB storage devices use a block size of 512 bytes.
The AirPort Extreme (802.11n) shares storage devices based on the format used to initialize the storage device. For example, if HFS-plus formatting was used, AFP and SMB/CIFS protocols are used to share the device on the network. If FAT16 or FAT32 was used, SMB/CIFS protocols are used.
The AirPort Extreme (802.11n) works with disks that have a single partition and are not RAID volumes (no more than one volume per physical disk).
Note: Use AirPort Disk Utility to discover and mount AirPort Extreme-based volumes over the network.
William -
Hallo zusammen,
Ich hoffe ihr könnt mir helfen.
Wie kann ich einen USB Scanner (Canon Lide80) an der AirPort Extreme netzwerkfähig machen und so ins Netzwerk einbinden, dass mehrere PCs Zugriff auf alle Funktionen haben?Sorry, aber der USB-Anschluss an der AirPort Basisstation unterstützt nur grundlegende Druckfunktionen. Es unterstützt nicht das Kopieren, Faxen oder Scannen.
-
I'm thinking about upgrading my old 802.11g router for a new airport extreme. Can it connect to a usb printer and external hard drive at the same time and acutally work. It only has one usb port on the back.
thank you!To add multiple USB printers and/or HDDs, you just first need to connect a USB hub (powered prefereably) to the AirPort's USB port, and then, add the USB devices to the hub.
-
Why does the usb printer go offline through the airport extreme?
My hp 2500n printer is listed as not connected. I have it hooked up to myAirport Extreme via usb. If I disconnect and reconnect the usb, it sees it and all is well as long as the printer is never turned off. If the printer power is cycled, the usb connection is lost and the only way I have found to reestablish the connection is by manually disconnecting and reconnecting the usb cable. There are no intervening devices between the printer and the usb connection on the Airport Extreme
Any ideas out there?I had the exact same problem
It turns out I was using a 20 foot USB cable between the printer and the Airport Extreme and the signal had become to weak to work. Try using nothing more than a 6 foot cable or try a new cable -
Thanks in advance for any help you folks can offer. I'm a newb here and will try to offer as much detail as I can about the dilemma at hand.
Scenario: Home network has been recently set up for wireless internet access via NEW Airport Extreme Base Station (purchased September 2011). Units accessing the network include: 2011 Macbook Pro, 2011 Macbook Air, 2007 Macbook, 2009 Macbook Pro, 2 iPhone 3GSs, and a 1st-gen iPad (and a partridge in a pear tree AEBS is configured to run WPA2 encrypted network, as well as a WPA2 guest network. I am attempting to yoke a BROTHER HL5370DW wireless B or G/ ethernet / usb-capable printer to the main network such that any and all units can print wirelessly or its equivalent (i.e., via printer hooked to AEBS through USB hub)
Problem: Despite configuring the Brother printer to recognize the main WPA2 network I created, I am unable to get wireless printing to work. My workaround was to physically connect Brother printer to AEBS via USB, specifically using a Belkin USB hub (after all, I wanted access to usb drives, as well as the printer). This workaround works ONLY SOME OF THE TIME. Generally, after a fresh boot of any computer or after a restart of the AEBS, any given computer will be able to print (i.e., any computer wirelessly connected to the main WPA2 network recognizes the printer). HOWEVER, at random times, printer access is gone (as is access to USB drives connected to AEBS's usb hub). Wireless networks are still up and running when that happens. IS THERE A WAY TO GET THE USB HUB's devices (i.e., printer and usb drives) to ALWAYS REMAIN AVAILABLE AS LONG AS THEY STAY CONNECTED TO THE AEBS? In other words, what accounts for the intermittent loss of the usb peripherals?
Sometimes, I just shut the airport off on whatever computer is having this problem, and the problem goes away. Sometimes, the problem is present across all computers in the house, sometimes only a few are affected. I can ALWAYS see the AEBS in the Airport Utility if the AEBS is connected to the particular computer via ETHERNET CABLE.
My theories:
- true wireless printing (i.e., without usb hub workaround) doesn't work because the N network somehow isn't backwards compatible with the Brother printer, which, i believe, is B/G. Although...isn't Wireless N networking supposed to work with BG devices? I did find a thread (https://discussions.apple.com/thread/2570774?start=0&tstart=0 ) that explains some of the particulars of WPA2 encryption and Wireless B/G issues, but it was beyond my level of comprehension (I'm a psychologist, but not an Apple Genius
- The usb workaround is only intermittently viable because of some flaw in the Airport or Airport Utility that causes dropouts to happen when a Macbook Pro or Air's lid gets closed or one gets opened after having been at a different network (e.g., at my office).
QUESTIONS:
- Should I try to use my old router (7 year old Linksys WRT54G) as an access point and connect the Brother printer to that G-router? How do I do that?
- I wouldn't mind just relying on the usb hub method if I could just insure more consistency (i.e., no random dropouts of peripherals). How could I do this?
Rule out:
- wireless printing works on my printer - it was being recognized back before the AEBS. I had the Linksys router running a WEP network and had the wireless printer talking with no cables to the router and the computers. (I just don't want to revert to using WEP encryption given its lack of security and my trying to protect HiPAA related health information on behalf of patients)
Any help will be greatly appreciated.
Thanks in advance!13 ASCII characters = 104 (aka 128)-bit WEP
encryption
If turning off WEP works, then you just need to
provide the cameras with the "Equivalent Network Password".
One of the problems with WEP is that the actual
standard relies on a 10 character HEX key for 40bit
WEP and a 26 character HEX key for 128bit WEP.
In order to make things easier, vendors use certain
algorithms to convert simple alphanumeric passwords
(or passphrases) into HEX keys, thus enabling the use
of simple easy to remember WEP password rather than
lengthy HEX keys. The problem is that different
vendors use different algorithms to generate the HEX
key and therefore a ASCII password on an AEBS will be
hashed differently on a non-Apple client and vice
versa.
You may find the following article helpful:
- Apple article, especially the part about
"Third-party client to Airport".
Brilliant idea about trying the system with No encryption on... that DID solve the problem... almost.. once I turned off the encryption option, and restarted the Airport, I got a dialog box showing that the "Base station needs attention" but it didn't indicate WHAT kind of "assistance" it needed. Nonetheless, I closed out of the Airport program only to find that the indicator light, which had been Green, was now, flashing Yellow and I could not connect anything, including my computer. I opened the Airport program again and found the ONLY way I could get the Green light on was to select some sort of encryption option... then the light would go Green again but my cameras would not hook up again, and when I went back in and ONLY changed the option to NO encryption, I got the yellow flashing light and the "this base unit needs attention" warning...
I think your suggestions are almost on the mark... is there any way of reconciling the WEP coding between the cameras and the Airport??? Or turning off the encryption option and STILL have Airport work?
Thanks again for your help and suggestions... I really appreciate it.
geoff
Maybe you are looking for
-
My Macbook is not working. i dont know what to do. Please help
-
Follow-up transaction copy control for opportunities
Our CRM system is currently configured to permit follow-up opportunity creation. When follow-up transactions are created all product categories are copied to the new opportunity. We would like to stop this. All header and business partner data sho
-
In which screen the Profit Center field can be seen in SAP CRM Product Master?
Hi SAP Experts, Please provide your valuable inputs on the below request: 1) Do we have profit center field in SAP CRM Product Master?If yes then in which screen can we see? 2) At the moment we are not using the profit center field in either of the
-
How do you display toolbar in safari
How can you get the toolbar? I have read everything I can but don't see it covered. I have a task I need to do that instructs me to click on the view tab but I don't have one
-
Internet Explorer 8 crashes when printing webpage to PDF
Is anyone else experience their browser crashing when printing webpage to PDF? This only happens in IE8. This feature works fine in firefox. Thanks!