USB Printer queue gets stuck - SRSS 4.2, SRWC 2.2, SRVC 1.1, VMware View 4

Hi,
My environment is VMware vSphere 4 with a few ESX 4 servers. On that, I have a vCenter, a View 4 server and SRSS. Then I have a number of Windows XP desktops.
When the user logs into his/her desktop via the Sun Ray, everything works including the local USB printer (an HP laserjet). But...you can only print once...then the print queue stays at "Printing" and won't go away. Any further print jobs just get queued up. It also won't let you delete the print job from the queue. The first print job actually does come out on the printer, but doesn't disappear from the XP's print queue.
Any ideas?
Jim

I can duplicate the "white screen of death" with Early Access to vmware view, with Rays running from Solaris/x86. This is in fact not vmware-specific, as I can hang uttsc to an ordinary XP system. To duplicate fairly reliably, I run a Flash example and then "start -> logoff". uttsc doesn't terminate, and truss shows repeated
/1: pollsys(0x08046690, 2, 0x08046728, 0x00000000) = 0
/1: ioctl(10, AUDIO_GETINFO, 0x08046620) =0
This doesn't happen if the IE window is terminated before logout. The behavior appears to be independent of "-F off" in uttsc (but I'm using the Ray audio driver).
Is there a workaround (other than downgrading) in the vmware view scenario?
Edited by: grommit on Aug 5, 2009 7:37 AM

Similar Messages

HELP ! Print jobs getting stuck in Queue

Hello:
I am using a HP Deskjet 5550 with two Mac's - an iMac G3 Classic and an iMac G5
Tiger. I have the printer connected to both Mac's. I am using the USB connection for the G3 and the Serial - USB connection for the G5.
I have no problem printing from the G3, but the 5 is getting me frustrated!
The printer prints a few pages and then the rest of the printing gets stuck &
stopped in the Queue. I am using the 2.7.1 driver from the Tiger install DVD,
but I have also tried the drivers from the HP download page.
I have also tried doing a Reset of the printer system. This problem does seem
to be intermitten but it is far worse most of the time then better.
I have looked at the HP Support site, but there is nothing I have found for
this problem. I have also tried using the Printer Sharing on the G5 (Tiger).
Any input/suggestions/ideads most greatley appreciated.

Did it ever work? How did you install the printer? Did you follow these directions on page 12? How did it go?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Inbound Queues getting stuck up in PI7.1 for Idoc scenario Mpackg. enabled

Hi Experts,
We have an issue while processing Single Idocs in PI 7.1.
we have extended MATMAS05 and we are processing these via PI to FTP folder.
The inbound queues are frequently getting stuck.we will be sending atleast 1000 idocs every hour from R3.The processing time is very slow for this interface and its impacting other interfaces which we are currenlty having.
We have followed the webblog by William Li "Step-by-Step Guide in Processing High-Volume Messages Using PI 7.1's Message Packaging" but still the processing time for Single Idocs is very slow.
We have to use single idocs as we will send only the changed materials from R3.
Could you please assist us in overcoming this issue.
Many thanks in advance.
Points will be awarded for valuable feedback.
Cheers
Jyoti

Hi Jyoti,
Message Packaging works PI7.0 SP 13 and PI7.1 .
we have to configure Message Packaging manually ,
Step 1) 1. Enable packaging for the integration server
SXMB_ADM -> Change Configuration (F9), create a new entry:
Category: RUNTIME (PI7.1)
Parameters: PACKAGING Current Value: 1 (for active) .
Default Value in PI7.0
Current Value: 0 (for inactive)
Step 2) Create "Package Configuration Type u201C
Use Transaction SXMS_BCM .
Configuration Type : Any name.
Description: any text to describe the configuration type .
Wait Time : 60 seconds
Number: 100
Maximum Package Size. 2 MB
Step 3) Create "Sender/Receiver Definition
Transaction :   SXMSIF (Create New Entry).
Sender/Receiver ID:PACKAGE_DEMO .
Description :
Interface Name: Interface Name used in Receiver Determination.
Interface Namespace:   Interface Namespace used in the Receiver Determination .
Step 4: Create "Specific Package Configuration"
Transaction :    SXMS_BCONF .
Step 5: Package Monitoring
TX: XMSPKSTATCNF
Follow above steps and configire message packaging , then you feel diference,
actuualy i configured message mackaging,i am feeling the difference.
if any issues let me know.
Cheers,
Raj

Adobe X goes into "Flattening" when printing and gets stuck at 6%, why?

When attempting to print some PDF's Acrobat X goes into "Progress" and sticks on 6% "Flattening" and does not print. when clicking on the programme it says "Not Responding". Can anyone help with this please.

Hey @Shellyschoon,
Welcome to the HP Support Forums!
I understand that you're having an issue setting up and installing your HP Laserjet P1102w printer wirelessly with your Mac OS X 10.6.8. I'd be more than happy to help you with getting up and running wirelessly today!
The HTML Config errors that you're getting seem to be an issue with your internet browser. Can I have you start by changing your default browser on your Mac and giving the wireless configuration another attempt?
In order to change your Mac's default browser (preferably to Safari), you want to go to:
Choosing a default web browser
Open Safari (/Applications).
From the Safari menu, choose Preferences.
Click the General button.
Choose your desired browser from the "Default web browser" pop-up menu.
Mac OS X: How to change your default email application or web browser
Once your default web browser is changed to Safari, try to run the HTML Config wireless setup again.
Let me know if this works for you. Best of luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Add printer dialog gets stuck

i want to add an ip printer, since it's driver dissapeared after SL upgrade. i installed the driver again, add it's ip and queue name in sys.prefs>printing. there is a message coming up telling me the address is complete and valid. then, when i want to click 'add', the 'add' buton just blinks quickly, but the window with the dialog doesen't go away. there's no hang or beach ball or anything.
by the way the installed driver is for a canon c2880, the driver's name is Canon UFR II Printer Driver v1.80 for Macintosh (v1.80)

You may need to clarify some things.
1. Do you mean that when you click to add and you have the Default viewed displayed, you can see old printers.
Or
2. When you select to add a printer and you open the Print Using menu you can see a number of old printers in the list.
If it is 1 then there could be another Mac on your network with these printers installed and it is set to share them.
If it is 2 then this is normal. There are a large number of printer files pre-installed in Snow Leopard.
And a reset of the printing system would not remove either from view.

Network Print Jobs Always Get Stuck in Queue

Hello,
I have, perhaps, the most frustrating problem on the planet. In my home network, I have a HP Color LaserJet 2600n connected to my main PC, with 2 other PC's on the network. All 3 run Windows 7. Printing from my main PC works fine, but if I try to print over the network, the print job always gets stuck in the queue. I can see it stuck in the queue on my main PC, but I can't do anything about it. I can't delete it, nothing. If I restart the spooler, then it magically prints and clears the queue, but it's annoying to have to do that all the time. I've reinstalled the drivers several times to no avail. Tips?
RPGillespie

I have a similar problem, I have a directly connected 1300 and a network P3015. The 1300 is connected via USB, the 3015 is connected by RJ45 cable right to the router. Both printers have their print queues get stuck, but only from my HP Pavilion Elite HPE running HP-installed Windows 7. All the other machines in the office can use the 3015 printer perfectly well. One is an older Pavilion using XP-Pro, another is a Dell using XP-Pro and the third is a Lenovo laptop using Windows 7. All our toners are not refills (seems like a stupid suggestion that the toner cartridge could cause a queue to lock up). The problem is definitely between my machine and the HP printers. I have a Brother printer and a couple of Seiko/Epson printers that all work perfectly fine.
Rebooting several times a day is getting old.

Print queue

I am running Windows 7 Ultimate on a 32 bit laptop. I have a parallel-to-USB printer cable connected directly to my laptop usb. I've downloaded and installed the Windows 7 32 bit driver for my HP LaserJet 6p printer. However, when I send a print job (test print from the printer setup; report from Quicken) the print job gets stuck in the print queue and I can't delete it. At one time (through my many hours of trying to solve this issue on my own) a print job DID print, but all it printed was the Windows logo and the large font text WINDOWS PRINTER TEST PAGE. That is the ONLY thing I've been able to print so far today and I don't know what I am doing wrong that 1)my print jobs will not print and 2)I cannot delete print jobs from the print queue. I can't cancel the document from the Document screen nor can I cancel all documents from the printer screen. Occasionally, the document will disappear from the queue (that's happened twice), but again, I have no idea what happened for it to disappear unless it's a SUPER delayed response to me trying to delete it several minutes before. Is the anyone out there that can tell me what on earth I am doing wrong and how to correct it? If so, I would GREATLY appreciate the help. Thanks a million in advance.

To empty the Windows 7 or Vista print queue follow these steps.
1. Click Start.
2. Type Command in search field then Enter.
3. Right-click Command Prompt and select Run as administrator.
4. Type net stop spooler then Enter.
5. Type del %systemroot%\System32\spool\printers\* /Q then Enter.
6. Type net start spooler then Enter.
7. Type exit then Enter.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Print jobs slow to leave Mac print queue

Mac laptops running 10.5.6. IP printers added, using LPD with queue of lp. There is a Xerox WCP232, HP Laserjet Series 4/5 and another print queue on the systems. Several presets created as laptops are shared, each preset is configured for a secure print with the users code associated with the setup. When multiple jobs are printed, users notice that the print queue gets backed up and the jobs slowly leave the print queue on the mac. This happens with several laptops. When only one print queue exists, the print jobs go through quickly. This can only be replicated on the subnet which the laptops are used, Xerox cannot replicate the issue nor can other users on the network.

If you have a computer still running 10.5.8 that will likely be ON when you want to print to AppleTalk Printers, you can set up the printers on that Mac, then declare them "Shared" from that Mac.
They will be seen from the rest of your Macs as Bonjour Shared printer that reside on the 10.5.8 Mac.
Re-Install those printers on your other Macs, using Bonjour Shared @ 10.5computername to Install them. You can print again!
If this solution will not work for you, post your Printer model numbers are readers can help find other approaches to get them going in a "no more AppleTalk" environment.

HT3669 My macbook pro does not print through my PC to my EPSON RX 500 after loading OS X 10.7.4. It shows on the print queue "error" However, it will print if I directly connect my laptop to this printer via the USB connection. Any ideas?

My macbook pro does not print through my PC to my EPSON RX 500 after loading OS X 10.7.4. It shows on the print queue "error" However, it will print if I directly connect my laptop to this printer via the USB connection. Any ideas?

It's all about setting up what ever version of windows you have running on your pc to share the printer. If you still get stuck post in a windows forum for help.

Stuck at restoring print queues while migrating from 2003 X86 to 2008 R2

i am trying to migrate from 2003 to 2008 R2 but i am stuck where it says restoring print queues and is tuckat 84% there is no error and it has not completed from pas 3 hrs now.. i have 6 print queues on it and is it normal that this willtake such long for
these 7 queues

we are getting the following error.
Log Name: Application Source: Microsoft-Windows-PrintBRM Date: 1/23/2014 5:27:15 PM Event ID: 30 Task Category: (5) Level: Error Keywords: Classic User: N/A Computer: MARPRINTPC01N1.bsci.bossci.com Description: The language monitors in the backup file
are for a different processor architecture than the destination computer. Printbrm.exe (the Printer Migration Wizard or the command-line tool) will not migrate any language monitors. Source architecture: Windows NT x86. Destination architecture: Windows x64.
Event Xml: <event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"><system></system><provider EventSourceName="PrintBrm" Guid="{CF3F502E-B40D-4071-996F-00981EDF938E}" Name="Microsoft-Windows-PrintBRM"></provider><eventid Qualifiers="49154"></eventid>30</eventid><//eventid>
<version></version>0</version><//version> <level></level>2</level><//level> <task></task>5</task><//task> <opcode></opcode>0</opcode><//opcode> <keywords></keywords>0x80000000000000</keywords><//keywords> <timecreated SystemTime="2014-01-23T22:27:15.000000000Z"></timecreated><eventrecordid></eventrecordid>4174</eventrecordid><//eventrecordid>
<correlation></correlation><execution ProcessID="0" ThreadID="0"></execution><channel></channel>Application</channel><//channel> <computer></computer>MARPRINTPC01N1.bsci.bossci.com</computer><//computer> <security></security></system><//system><eventdata></eventdata><data
Name="param1"></data>Windows NT x86</data><//data> <data Name="param2"></data>Windows x64</data><//data> </eventdata><//eventdata></event>

NetWare Queues and USB Print Servers

Hello good people,
We usually use HP JetDirect en3700 (J7942A) USB print servers when we have
to, which work well.
However, there is severe constraint in the supply chain at the moment.
Do any of you have a suggestion for an alternative USB print server that
supports printing from a queues environment? Willing to look at any brand
or manufacturer.
Thanks.
Andrew

Jdvb,
> one of my LPT printers stopped working, and well, USB printers are more
> available.
> How do I get a USB printserver to service my NetWare 6.5 queue.
>
> I have ordered a D-link DPR-1061 printserver, though I am unsure of how
> to set it up in Nwadmin or something similar.
> My suplier stopped support for NetWare and I am basically clueless of
> how to work with NetWare.
>
> The Novell Netware printer works primarilly on IPX.
>
> I am unsure of how to make it work, the printserver also supports
> unix/Appletalk which I also see as options in Nwadmin when I add a
> printer.
> Though when I load Pserver and then the printserver it fails to load
> the driver for either appletalk/unix.
>
> please help
> Please help.
You need to install and configure NDPS (iPrint). The procedure is covered
in the docs and queue-based and NDPS can coexist. You then create a
printer in NDPS, have it service the queue. For output you use ypur
printer, configured as LPR.
- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)
Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms

My 2009 iMac gets stuck on the grey Apple logo when booting up. It boots correctly when in safe mode. I have tried erasing the HD and re-installing from a USB installer. It says the install is complete, but after restarting it gets stuck on the Apple log

My late 2009 27" iMac gets stuck on the grey Apple logo when booting up. It boots correctly when in safe mode. I have tried erasing the HD and re-installing from a USB installer. It says the install is complete, but after restarting it gets stuck on the Apple logo again. This could possibly be an HD failure, but then why does Safe Mode still work and the USB install not work? Any ideas?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1|head -1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

USB printer on Airport Express via Bonjour: print queue no longer works

This is a variation of similar postings on this forum, but hopefully provides more information to allow others to pinpoint the problem.
Have been using Intel iMac 10.4.8 now upgraded to 10.4.10. Two printers attached: 1 via USB and a 2nd via USB/Bonjour on Airport Express. Both working flawlessly. 2 days ago, an ADSL Internet outage occurred. When this was reestablished an hour or so later, everything was back to normal, EXCEPT that the USB/Bonjour/Airport printer no longer works. When jobs are sent to it, the printer queue stops and a red "!" appears in the dock on the queue. Restarting the queue just brings back the red "!" again.
Have done all the usual things:
1. Checked cables, restarted iMac, restarted printer, reset Airport.
2. Have confirmed the printer works find if moved to a direct USB port. So the problem is not the printer.
3. Have upgraded the Airport firmware to 6.3. Works just fine as a network access point. So the problem is not the Airport itself.
4. Have deleted, added the printer, renamed the printer - none of these things helped (this was suggested by some postings on the forum)
5. Have tried every combination of which item is powered up first (this was suggested by some postings on this forum)
Have confirmed (by checking CUPS Error Log, as well as by Internet Connection Diagnostics) that the problem is that the iMac can no longer connect to the printer when printing on the local host if it is connected via USB/Bonjour/Airport. However, it can find the printer for adding a printer during setup. So Bonjour is working, but the printing is not.
There are lots of similar postings of people having problems with printers previously working, but then stopping working on an Airport Expresss/Extreme. I hope the above scenario, which is a very simple network topology, and the fact that the iMac and printer and Airport all work correctly on their own, is of help. It does look as if the problem is in the Airport Extreme, and was triggered by the WAN outage, and not fixed by printer reinstallation or firmware upgrade.
Looking forward to someone with a clever suggestion...
LeslieB

What did you use to discover the printers on both Mac and PC. Did you use Bonjour for both?

How do I get my macmini running Mountain Lion to see my Canon USB printer connected to my Airport Extreme? I have a macbook pro running leopard and that works fine. The versions of airport utility are different and I can't even see the printer from new 1

I am having trouble seeing my usb printer from my second gen airport extreme using the newest version of airport utility under Mountain Lion. UGH! And while I can see and network to my Canon IP5000 from my macbook pro running leopard, I can't from my new macmini running Mountain Lion. Any help would be appreciated in configuring my macmini so it can see the Canon IP5000 on the airport extreme. Don't want to "share" the printer from the laptop because that would be a cludge. Thanks ahead

I solved this one based on another post. Turned out I needed the snow leopard IP5000 driver. I had just copied over the leopard driver (I had saved my .dmg file) and installed that but it didn't work. So I downloaded the latest driver which turned out to be for snow leopard and I am guessing since it is 64bit that is why it worked and the leopard driver didn't. Anyway, I also had to hook the printer up via usb to the mac mini to get it to work locally before the O/S would see it over Bonjour via the airport extreme.

Some Journaled Calendar Requests get stuck in Submission queue - 550 5.6.0 - storage error in content conversion

I am having an issue on hub transport servers running Exchange 2010 SP3 RU6.
Where some journaled meeting request related messages (acceptances, etc.) get stuck in the Submission queue.
The error is:
400 4.4.7 The server responded with: 550 5.6.0 M2MCVT.StorageError; storage error in content conversion. The failure was replaced by a retry response because the message was marked for retry if rejected.
I raised the issue with our mail archiving vendor and they indicated this was an Exchange Server problem which should have been fixed in Exchange 2010 SP3 RU3, however we are running SP3 RU6 and the issue continues to occur.
I realize that we could just delete the stuck messages from queue but has anyone run in to this before and know how to prevent it from happening?
Thank You.

Hi Mike,
If you temporary disable\bypass third party Archiving , then what happens in the Queue.
Thanks , Prakash
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

USB Printer queue gets stuck - SRSS 4.2, SRWC 2.2, SRVC 1.1, VMware View 4

Similar Messages

Maybe you are looking for