USB printer recognized by A.Express but not by new A. Extreme (gigabit)
My Canon IP4300 was automatically recognized and worked without any problems with an old Airport Express. However, with my new AEBS (gigabit ports), the printer is no longer recognized, I don't see it in the printers tab (says none).
Surprisingly, when a Windows PC connects to the new AEBS with the printer connected to the AEBS USB port (but not recognized in the Airport Utility), the windows PC finds the printer and can connect to it. So physically, the connection can be made, thus it has to be a problem with the Airport utility?
Quite strange that AEBS printer 'plug and play' works better with Windows PC than with Apple computers. Other people experiencing the same problem?
Nevermind. The Epson R220 works fine on the AEBS. Wrong USB cable was plugged into the AEBS.
Similar Messages
-
USB printer on my Airport Express will not work..
Hi, using the newest Airport Express to extend my network. Tried now to use it via USB to get a network printer. The printer (Canon Pixma MP 970) shows on my list for printers to add. When to install my Mac asks me to install the newest software, there is no possibility to say no and just continue. After a yes I get allways the same message, it is not possible to download the newest software from the server. There after the dialoge quiets and I cannot add the printer. Trying solving the problem manually by downloading the newest software from Canon I just get a note that I am not allowed to download from this page new software in order to security policy of Apple. I have to do it from the app store. Here I do not find a newer driver for my printer....what to do? My IOS X is 10.8.2.
See if this helps you.
http://www.ifelix.co.uk/tech/1011.html
If not, you don't mention which Windows version you are using check iFelix's Site.
http://www.ifelix.co.uk/tech/
Cheers Don -
IPod nano recognized in MY Computer but not in iTunes
My iPod nano is recognized under My Computer but not in iTunes.
I formaatted the iPod nano as FAT32 using the format option when right-clicking on the drive in My Computer.
I installed the latest version of iTunes software. I adopted the five R's approach to resolve my issue. I have wanted to restore the iPod but this option is not available in iTunes, since the iPod is not recognised by the software.
The iPod diagnostics option in iTunes indicates the following:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Computer Corp. Latitude L400
iTunes 7.0.2.16
iPodService 7.0.2.16 is currently running.
iTunesHelper 7.0.2.16 is currently running.
Current user is an administrator.
Connected Storage Devices:
IDE\DiskIC25N020ATDA04-0______________________DA3OA70A, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskApple__iPod___________1.62, Bus Type USB
USBSTOR\DiskWD_____2500BB_External0602, Bus Type USB
Universal Serial Bus Controllers:
NEC PCI to USB Open Host Controller, PCI bus 129, device 0, function 0. Device is working properly.
NEC PCI to USB Open Host Controller, PCI bus 129, device 0, function 1. Device is working properly.
Standard Enhanced PCI to USB Host Controller, PCI bus 129, device 0, function 2. Device is working properly.
Intel(R) 82371AB/EB PCI to USB Universal Host Controller, PCI bus 0, device 7, function 2. Device is working properly.
No IEEE 1394 Host Controller found.
Connected Device Information
ORLAITH'S I (I:\), iPod nano running firmware version 1.1.1
Serial Number:
Bus Speed: 61440
The last connected iPod serial number:
The iPod Service Logging Information:
[SERVICE: 0x834,09:19:26 INFO] Started C:\Program Files\iPod\bin\iPodService.exe (Fri Dec 15 09:19:26 2006)
[SERVICE: 0x834,09:19:26 INFO] ##### iPodService starting as a service, version: 7.0.2.16
[SERVICE: 0x848,09:19:27 INFO] Got signaled to go ahead... Starting device manager!
[SERVICE: 0x87C,09:19:27 INFO] Listener Window created
[SERVICE: 0x87C,09:35:21 INFO] [DevNodesChanged]
[SERVICE: 0x87C,09:35:22 INFO] [DevNodesChanged]
[SERVICE: 0x87C,09:35:23 INFO] [DevNodesChanged]
[SERVICE: 0x87C,09:35:23 INFO] [DevNodesChanged]
[SERVICE: 0x87C,09:35:23 INFO] [DevNodesChanged]
[SERVICE: 0x87C,10:15:57 INFO] [DevNodesChanged]
[SERVICE: 0x87C,10:15:57 INFO] [DevNodesChanged]
[SERVICE: 0x87C,10:15:57 INFO] [DevNodesChanged]
[SERVICE: 0x87C,10:15:58 INFO] [InterfaceArrival] \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x87C,10:15:58 INFO] device \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x87C,10:15:58 INFO] device is an iPod
[SERVICE: 0x87C,10:15:58 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x87C,10:15:58 INFO] [-1] set waiting to mount = 1
[SERVICE: 0x87C,10:15:58 INFO] [1] Assigning session 0
[SERVICE: 0x87C,10:15:58 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_objDeviceNameMap
[SERVICE: 0x87C,10:15:58 INFO] [1] added state machine 1 to m_objDeviceIdMap
[SERVICE: 0x87C,10:15:58 INFO] [1] added device number 2 to m_objDeviceNumberMap
[SERVICE: 0x87C,10:15:58 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_vctDeviceInterfaces
[SERVICE: 0x87C,10:15:58 INFO] [DevNodesChanged]
[SERVICE: 0x87C,10:15:58 INFO] [1] input #0 from src #0
[SERVICE: 0x87C,10:15:58 INFO] [DevNodesChanged]
[SERVICE: 0x87C,10:15:58 INFO] [1] input #1 from src #0
[SERVICE: 0x86C,10:15:58 INFO] [1] input #0
[SERVICE: 0x870,10:15:58 INFO] [1] input #1
[SERVICE: 0x86C,10:15:58 INFO] [MACHINE 1 INPUT #0] - (HDW) CheckDevNode
[SERVICE: 0x86C,10:15:58 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x870,10:15:58 INFO] [MACHINE 1 INPUT #1] - (HDW) CheckDevNode
[SERVICE: 0x870,10:15:58 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x87C,10:16:01 INFO] [SIMULATED VOLUME ARRIVAL] generating volume mount for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x87C,10:16:01 INFO] [VolumeArrive] mask = 0x1FC
[SERVICE: 0x87C,10:16:01 INFO] looking up device # for \\.\I:
[SERVICE: 0x87C,10:16:01 INFO] type 0x7 drive 0x2 partition 0x1
[SERVICE: 0x87C,10:16:01 INFO] iTunes device #2 found with drive letter I, mask 0x100
[SERVICE: 0x87C,10:16:01 INFO] [1] set waiting to mount = 0
[SERVICE: 0x87C,10:16:01 INFO] [1] input #2 from src #0
[SERVICE: 0x87C,10:16:01 INFO] looking up device # for \\.\H:
[SERVICE: 0x87C,10:16:01 INFO] type 0x7 drive 0x1 partition 0x3
[SERVICE: 0x87C,10:16:01 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
[SERVICE: 0x874,10:16:02 INFO] [1] input #2
[SERVICE: 0x874,10:16:02 INFO] [MACHINE 1 INPUT #2] - (HDW) Volume Mount
[SERVICE: 0x874,10:16:02 INFO] ** CItunesDevice::HandleHardwareInput()
[SERVICE: 0x878,10:16:02 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x878,10:16:02 INFO] [First Connect] Creating connect event for device 1
[SERVICE: 0x878,10:16:02 INFO] [1] set waiting to mount = 1
[SERVICE: 0x878,10:16:02 INFO] [1] input #3 from src #0
[SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x86C,10:16:02 INFO] [1] input #3
[SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\.\G:
[SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x1 partition 0x2
[SERVICE: 0x87C,10:16:02 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
[SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\.\F:
[SERVICE: 0x87C,10:16:02 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0x87C,10:16:02 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\.\E:
[SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0x87C,10:16:02 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
[SERVICE: 0x86C,10:16:02 INFO] [MACHINE 1 INPUT #3] - (HDW) Interface Arrival
[SERVICE: 0x86C,10:16:02 INFO] [1] progress state is 2, Waiting to mount = 1
[SERVICE: 0x86C,10:16:02 INFO] [1] progress is now 2
[SERVICE: 0x86C,10:16:02 INFO] [1] progress is now 2
[SERVICE: 0x86C,10:16:02 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
[SERVICE: 0x86C,10:16:02 INFO] [MACHINE 1 ACTIONS] - {Connected}
[SERVICE: 0x86C,10:16:02 INFO] [1] SCSI Inquiry attempt #0
[SERVICE: 0x86C,10:16:02 INFO] VendorId: Apple
[SERVICE: 0x86C,10:16:02 INFO] ProductId: iPod
[SERVICE: 0x86C,10:16:02 INFO] revision: 1.62
[SERVICE: 0x86C,10:16:02 INFO] vendor bytes:
[SERVICE: 0x86C,10:16:02 INFO] 02 01 00 00 00 00 00 00 00 0C 00 06 92 00 00 00 00 00 00 00
[SERVICE: 0x86C,10:16:02 INFO] [1] firmware version: 1.62 (0x13E)
[SERVICE: 0x86C,10:16:02 INFO] [1] Power State: Powered
[SERVICE: 0x86C,10:16:02 INFO] [1] Checkpoint attempt #0
[SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\.\D:
[SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x0 partition 0x3
[SERVICE: 0x87C,10:16:02 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x86C,10:16:02 ERROR] Did not find first letter of stage
[SERVICE: 0x86C,10:16:02 INFO] got HotPlugState 0
[SERVICE: 0x86C,10:16:02 INFO] [1] serial number 000A270018314842
[SERVICE: 0x86C,10:16:02 INFO] [1] *** CONNECTED - Sending event out, device session 0.
[SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x87C,10:16:02 INFO] [SIMULATED VOLUME ARRIVAL] generating volume mount for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x87C,10:16:02 INFO] [VolumeArrive] mask = 0x1FC
[SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\.\I:
[SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x2 partition 0x1
[SERVICE: 0x87C,10:16:02 INFO] iTunes device #2 found with drive letter I, mask 0x100
[SERVICE: 0x87C,10:16:02 INFO] [1] set waiting to mount = 0
[SERVICE: 0x87C,10:16:02 INFO] [1] input #4 from src #0
[SERVICE: 0x870,10:16:02 INFO] [1] input #4
[SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\.\H:
[SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x1 partition 0x3
[SERVICE: 0x87C,10:16:02 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
[SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\.\G:
[SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x1 partition 0x2
[SERVICE: 0x87C,10:16:02 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
[SERVICE: 0x87C,10:16:03 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x87C,10:16:03 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x87C,10:16:03 INFO] looking up device # for \\.\F:
[SERVICE: 0x87C,10:16:03 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0x87C,10:16:03 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x870,10:16:03 INFO] [MACHINE 1 INPUT #4] - (HDW) Volume Mount
[SERVICE: 0x870,10:16:03 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
[SERVICE: 0xD40,10:16:03 INFO] <0x4> Got Serial #
[SERVICE: 0x87C,10:16:03 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x87C,10:16:03 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x87C,10:16:03 INFO] looking up device # for \\.\E:
[SERVICE: 0x87C,10:16:03 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0x87C,10:16:03 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
[SERVICE: 0x870,10:16:03 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x870,10:16:03 INFO] [MACHINE 1 ACTIONS] - {Mounted}
[SERVICE: 0x870,10:16:03 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x870,10:16:03 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0xF74,10:16:03 INFO] [1] Progress state is 2, Waiting to disconnect = 0
[SERVICE: 0xAD8,10:16:03 INFO] Mounted
[SERVICE: 0xAD8,10:16:03 INFO] [1] already mounted!
[SERVICE: 0x87C,10:16:03 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x87C,10:16:03 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x87C,10:16:03 INFO] looking up device # for \\.\D:
[SERVICE: 0x87C,10:16:03 INFO] type 0x7 drive 0x0 partition 0x3
[SERVICE: 0x87C,10:16:03 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x870,10:16:03 ERROR] Did not find first letter of stage
[SERVICE: 0x870,10:16:03 INFO] got HotPlugState 0
[SERVICE: 0x870,10:16:03 INFO] [1] OS says filesystem is FAT32
[SERVICE: 0x870,10:16:03 INFO] File does not exist!
[SERVICE: 0x870,10:16:03 INFO] [1] iTunes Preference file does not exist!
[SERVICE: 0x870,10:16:03 INFO] [1] ===== iPod Nano =====
[SERVICE: 0x870,10:16:03 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x87C,10:16:03 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x87C,10:16:03 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x87C,10:16:03 INFO] [VolumeArrive] mask = 0x100
[SERVICE: 0x87C,10:16:03 INFO] looking up device # for \\.\I:
[SERVICE: 0x87C,10:16:03 INFO] type 0x7 drive 0x2 partition 0x1
[SERVICE: 0x87C,10:16:03 INFO] iTunes device #2 found with drive letter I, mask 0x100
[SERVICE: 0x87C,10:16:03 INFO] [1] set waiting to mount = 0
[SERVICE: 0x87C,10:16:03 INFO] [1] input #5 from src #0
[SERVICE: 0x878,10:16:03 INFO] [First Connect] Creating mount event for device 1
[SERVICE: 0x878,10:16:03 INFO] [VolumeArrive] mask = 0x1FC
[SERVICE: 0x878,10:16:03 INFO] looking up device # for \\.\I:
[SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x2 partition 0x1
[SERVICE: 0x878,10:16:03 INFO] iTunes device #2 found with drive letter I, mask 0x100
[SERVICE: 0x870,10:16:03 INFO] 10:16:3, year 2006, day of yr. 348, GMT offset 0 isDST 0
[SERVICE: 0x878,10:16:03 INFO] [1] set waiting to mount = 0
[SERVICE: 0x878,10:16:03 INFO] [1] input #6 from src #0
[SERVICE: 0x878,10:16:03 INFO] looking up device # for \\.\H:
[SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x1 partition 0x3
[SERVICE: 0x878,10:16:03 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
[SERVICE: 0x870,10:16:03 INFO] [1] progress is now 0
[SERVICE: 0x87C,10:16:03 INFO] [DevNodesChanged]
[SERVICE: 0x87C,10:16:03 INFO] [1] input #7 from src #0
[SERVICE: 0x878,10:16:03 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x878,10:16:03 INFO] looking up device # for \\.\G:
[SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x1 partition 0x2
[SERVICE: 0x878,10:16:03 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
[SERVICE: 0x878,10:16:03 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x878,10:16:03 INFO] looking up device # for \\.\F:
[SERVICE: 0x878,10:16:03 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0x878,10:16:03 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x878,10:16:03 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x878,10:16:03 INFO] looking up device # for \\.\E:
[SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0x878,10:16:03 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
[SERVICE: 0x878,10:16:03 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x878,10:16:03 INFO] looking up device # for \\.\D:
[SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x0 partition 0x3
[SERVICE: 0x878,10:16:03 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x878,10:16:04 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x878,10:16:04 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x870,10:16:05 INFO] [1] *** MOUNTED - Sending event out, device session 0.
[SERVICE: 0x870,10:16:05 INFO] [1] Auto-launch iTunes ENABLED
[SERVICE: 0x870,10:16:05 INFO] iTunes located at 'C:\Program Files\iTunes\iTunes.exe'
[SERVICE: 0xAD8,10:16:05 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0x870,10:16:05 INFO] [1] input #5
[SERVICE: 0x86C,10:16:05 INFO] [1] input #6
[SERVICE: 0x874,10:16:05 INFO] [1] input #7
[SERVICE: 0x870,10:16:05 INFO] [MACHINE 1 INPUT #5] - (HDW) Volume Mount
[SERVICE: 0x870,10:16:05 INFO] ** CItunesDevice::HandleHardwareInput()
[SERVICE: 0x86C,10:16:05 INFO] [MACHINE 1 INPUT #6] - (HDW) Volume Mount
[SERVICE: 0x86C,10:16:05 INFO] ** CItunesDevice::HandleHardwareInput()
[SERVICE: 0x874,10:16:05 INFO] [MACHINE 1 INPUT #7] - (HDW) CheckDevNode
[SERVICE: 0x874,10:16:05 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x844,10:16:05 INFO] iTunes already running in current session.
[SERVICE: 0xD40,10:16:05 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0xF74,10:16:05 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xF74,10:16:05 INFO] Mounted
[SERVICE: 0xF74,10:16:05 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xF74,10:16:05 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x858,10:16:05 INFO] <0x4> COM request for device 1 drive letter - I
[SERVICE: 0xF74,10:16:05 INFO] Mounted
[SERVICE: 0xF74,10:16:05 INFO] Device 0 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xF74,10:16:05 INFO] Device 0 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xF74,10:16:05 INFO] File does not exist!
[SERVICE: 0xF74,10:16:05 INFO] [1] CreateFileW error 0x3
[SERVICE: 0xF74,10:16:05 INFO] [1] WriteNewPrefs FAILED!
[SERVICE: 0xF74,10:16:05 INFO] [1] ReadDevicePreferences() failed!
[SERVICE: 0x858,10:56:59 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x858,10:56:59 INFO] Mounted
[SERVICE: 0x858,10:56:59 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x858,10:56:59 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xCFC,10:56:59 INFO] Mounted
[SERVICE: 0xCFC,10:56:59 INFO] [1] already mounted!
[SERVICE: 0xCFC,10:56:59 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0x858,10:56:59 INFO] Mounted
[SERVICE: 0x858,10:56:59 INFO] Device 0 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x858,10:56:59 INFO] Device 0 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x858,10:56:59 INFO] File does not exist!
[SERVICE: 0x858,10:56:59 INFO] [1] CreateFileW error 0x3
[SERVICE: 0x858,10:56:59 INFO] [1] WriteNewPrefs FAILED!
[SERVICE: 0x858,10:56:59 INFO] [1] ReadDevicePreferences() failed!
[SERVICE: 0xD68,10:56:59 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xD68,10:56:59 INFO] Mounted
[SERVICE: 0xD68,10:56:59 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xD68,10:56:59 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
I think a more comprehensive format might solve the problem. Anyone with any ideas.see if this helps
http://docs.info.apple.com/article.html?artnum=93716 -
I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems
Hi,
Apple's AirPrint only support specific models while using wired or wireless network connection.
Plugging a printer into a USB port of Apple base is not supported for AirPrint:
AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
As well you must use AirPrint enabled printers for a such, none of your printers are AirPrint enabled:
http://support.apple.com/kb/ht4356
There are 3rd party solutions which allow sharing a printer connected to your Mac as AirPrint, Printopia as example provide a such:
http://www.ecamm.com/mac/printopia/ -
My Printer (samsung clx-3185fw) says it connects to my network but I can't seem to print wirelessly. I could with my netgear but not with my airport extreme, any ideas?
I have restarted all units, disconnected and reconnectedHi ryanfromstockbridge,
I apologize, I'm a bit unclear on exactly what you are seeing when you try to add the printer or print to the printer. If you continue to have issues printing to this wireless printer, you may find the information and troubleshooting steps outlined in the following articles helpful:
OS X Yosemite: Printing troubleshooting
Troubleshooting printer issues in OS X - Apple Support
OS X Yosemite: Add or remove a printer
Sincerely,
- Brenden -
I can print from my iPad 3 but not from my new iPad mini which has a lower spec. What should I do?
Question. Why can I print from my iPad 3 but not from my new iPad mini which has a lower spec?
The "lower specs" have nothing to do at all with why you cannot print. Are you connected to the same Wi-Fi network that the printer & the iPad 3 is on?
-
LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are only accessible as long as the thumb drive is inserted.
Sounds like you may need to repair the Disk Permissions on your drive where your images are stored.
-
My computer recognizes my old iPhone, iPad and iPod but NOT my new iPhone. What the heck???
My computer recognizes my old iPhone, iPad and iPod but NOT my new iPhone what the heck? It was fine last week, now nothing
When you plug in your phone go to the sidebar on the left, select the device, and select the menu you want to sync.
For example at the top there is summary, info, apps, movies, etc.
If you wanted to sync movies go under there and pick and chose the movies you want on the device.
Let's assume you are doing that and syncing is not going properly. Then first double check that there is a checkmark in the top left of that page that says sync movies
If there is uncheck and then hit apply. Then it will take all the movies off. Now re-check everything and hit apply. -
When I enter my password to start my atv it tells me, that "there was a problem connecting to the network." My Ipad works fine in my house, but not my new atv. I have reset my password multiple times with no help. I have also rebooted my wireless server. Do I take it back?
Where is everyone???? Does anyone have an answer???
Allik1 -
Generate DDL works in old version of SQL Developer, but not in new versions
Hello all,
How to generate DDL in new versions of Oracle SQL Developer for production Oracle database?
For production database, the generate DDL feature works fine in old versions (version 1.5.5) of Oracle SQL Developer, SQuirrel, Toad and many other similar tools, but not the new versions of Oracle SQL Developer (such as 2.1.1.64.45).
The SQL tab for a table is blank for me in production databases. Of course, it works fine in development Oracle database.
I did some research that many articles describe SELECT_CATALOG_ROLE as the required read-only role in production database. Our DBA did a test to grant me this role temporarily, and it worked for me to generate DDL using new Oracle SQL Developer. It is pain for me to ask for this role.
Is there a plug-in or work-around, so the new versions of Oracle SQL Developer can have this generate DDL feature in production without the mentioned SELECT_CATALOG_ROLE?
I could not find the answer in older forum threads.
For now, I will have to install older versions of Oracle SQL Developer.
ThanksI've seen a couple posts about people not being able to generate DDL for other users. To date, I've never seen a anybody post a workaround, nor have I seen one of the developers post a response, nor have I seen anybody say they've submitted a SR.
I think I remember reading somewhere that the new version of SQL Developer uses dbms_metadata.get_ddl to generate DDLS, rather than some custom query built on top of catalog views...which could explain why it use to work, but no longer does. But whether or not this is true, I don't know.
You could try submitting a SR and see if Oracle responds saying that it's a known bug and will be fixed in the next release. Until then, unless you get the role, you're stuck using something else for DDL generation. -
Hi, I have a Indesign user who inherited a PC with Indesign installed. Indesign works with old PC user profile but not the new user. Any ideas how I can resolve this?
Question # 1 is what do you mean by "inherited"? Is this a case where the computer belonged to someone else? Your user would not be entitled to use a program licensed to someone else.
-
I can open a new browser window, but not a new tab, neither by clicking the plus or selecting it from the menu. I have fully updated firefox and also restarted. what's going on?
I have the same problem with the right click and do not have the ask toolbar installed on my system?
-
I am having to recreate my itunes library and do not understand why prior album artwork appeared in my older library but not the new library? Is there some way to scan itunes for missing album artwork?
do you have a strongly recommended default "managed" library (the iPhoto preference to "copy imported items to the iPhoto library is in its checked state) or a referenced library - you have unchecked that option?
It sounds like you have a referenced library and are now experiancing one of the very siginificant drawbacks of a referenced library and one of the many reasons they are strongly not recommended
Also note that iPhoto '11 may use alises in the originals folder as part of the upgrade
It is important that we understand exactly what you have and what is not sorking - what error messages you are getting
You must NEVER make any changes of any sort to the structure of content of the iPhoto library - there are no user servicable parts in it -- and you can not rebuild yoru librtary - only iPhoto ir iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - can rebuild a library unless you are a SQL programmer and understand the structure that iPhoto uses
LN -
Hi..............I have a new Creative Cloud registration and have bought the new Dreamweaver CC but I cannot seem to down load it? My Creative Cloud has downloaded but not my new Dreamweaver CC? I currently have the old Dreamweaver CS4 on my system! Can anyone help?
The first thing you need to do is download and install the Creative Cloud Desktop Application. Then, open that program and click on the Apps tab. You download and install creative cloud applications from there.
If your computer doesn't meet the minimum requirements to run a given program, it won't show up under the Apps tab.
Once they are installed, you'll need to go to your Applications folder (Mac) or Program Files (x86) folder (PC) to start the program itself. -
Before I un-install itunes has anyone had a problem getting an ipad mini to show up in itunes as a device when connected to the computer? My old ipad shows up but not the new mini.
Just wondered if anyone had any other suggestions.
Maybe you are looking for
-
What happens if I restore my new iPhone from backup but keep the old phone on?
I currently have an iPhone 5 and have the 6+ on the way. I'm worried about the size of the 6+ so I'd like to test it out for the 14 day period. If I set up the 6 by restoring from iCloud backup can I still keep my 5 up and running. I wasn't planning
-
Unable to make Postal code as required field in Vendor master creation
Hi, We have a requirement of making Postal code (POST_CODE1) field under street address of new vendor master creation/change as a required field. In the configuration settings of vendor account group (OBD3), SAP provided Postal code City combined as
-
How to maintain payment term descriptioin in other languages in TVZBT table
Hi all, i have to maintain the payment terms in different language. For that, i am updating the table TVZBT by using TCODE SE63 in development sys. it has not asked any change request.but table is updated . so i can not move the changes to production
-
Problem - Bursting information in Xml file
Hello All, Can you please guide me How to burst a BIP stand alone version report with all the email(bursting) information coming as XML file source. In other words, I've a report with Data model as file source(xml file) and would like to burst it, bu
-
create table mytable name varchar2(50), surname varchar2(50) insert table mytable values('mary','john') insert table mytable values('mary','baby') insert table mytable values('mary','lady') insert table mytable values('sean','kate') insert table myta