USB Printing AirPort Extreme 802.11n

I've upgraded to the new AirPort Extreme 802.11n base station and am having troubles printing to printers that worked fine with my previous AirPort Extreme 802.11g base station.
Both USB printers are detectable for set-up in the Print & Fax Preference tab and can be printed to when hooked directly to my computer. They are also detectable for set-up in the Print & Fax Preference tab when hooked via the base station.
So, all set-up and settings are fine. The issue I am having which never occurred before is that the file is sent to the queue but is immediately labeled as stopped and will not print no matter what I try.
I've configured, reconfigured, reset,you name it but with no luck.
does anyone have any answers out there. Please help...

I have had the same issue repeatedly after upgrading to Leopard. I can no longer use my printer (Brother HL-2070N the "network ready one") with my airport extreme router. It used to show up before I updated to 10.5.2, now I can't even get it to show up at all. I reset the base station, unplugged, and then re-plugged in the printer, nothing worked. Then I tried to just delete it from my list of printers and re-add it, but now my computer can't find it! I didn't change anything on my network at all, and I had literally printed something just 10 minutes before I applied the update. Very frustrating for a $180 router.

Similar Messages

I recently installed an Airport Extreme 802.11N that I bought in May 2013. It replaced an Airport Extreme 802.11N that I bought in July 2007. My USB printer (Lexmark E350d) worked fine with the old Airport, but the printer won't work with the new one.

I recently installed an Airport Extreme 802.11N that I bought in May 2013. It replaced an Airport Extreme 802.11N that I bought in July 2007. My USB printer (Lexmark E350d) worked fine with the old Airport, but I'm having trouble with the new one. When I try to print, I get a USB Waiting message on the printer, and when I force a page to print by pressing Go on the printer, I get a page that says ERROR: syntaxerror OFFENDING COMMAND: true. . . .cvt . . . fpgm . . . x . . .lglyf . . . <..J head . . . STACK: / [ -mark- /sfnts I’ve tried shutting down the printer and disconnecting it and the Airport, but that doesn’t help. I reset the settings on the printer. I upgraded the Airport firmware and removed, reinstalled, and upgraded the Lexmark printer driver. After I upgraded the firmware and printer driver, a few pages printed correctly, but then I got the same syntax error page as before. Any suggestions for getting the printer to work correctly?

Use a powered USB hub between the AE and the printer.. the usb port does sometimes have issues.
Try deleting the printer in the Mac and reinstall it.. the change in AE can represent effectively a change of printer.. it is important to make sure that is all up to date.
Beyond that.. USB printers.. ughhh! Consider for two toners you can go and buy a proper network printer.

How do I connect my Airport Extreme 802.11n to Epson 645 Printer?

I can't figure out how to connect my Airport Extreme 802.11n to my Epson 645 Printer. Can anyone help me? Thanks!

You may want to try reinstalling Mavericks. Airport Utility installed by Mavericks may no longer connect to your older AEBS (though I've not heard that.) Installing the Old AirPort Utility (Version 5.6) on Mountain Lion | frank.is.
Reinstall Lion, Mountain Lion, or Mavericks
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
     Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu.
     Repair the Hard Drive and Permissions as follows.
After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
     Reinstall Lion/Mountain Lion, Mavericks: Select ReinstallLion/Mountain Lion, Mavericks from
     the Utilities menu, and click on the Continue button.
     Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
                three times faster than wireless.

AirPort Extreme 802.11n Wi-Fi doesn't connect to printer

So, I got the AirPort Extreme 802.11N Wi-Fi connected and working to my cable modem (good times), but now neither computer (PC or Mac) can connect through it to the printer (HP C4280 Aii-in-One) that we connected to the USB port on the back of it.
Any idea what we're doing wrong here? Is there something that needs to be configured within the software of the router?

Work your way through the Apple Troubleshooting Guide to see if that will help get the printer going.
Bear in mind that only the print function will be supported when your device is connected to the USB port on the AirPort Extreme. Scan, copy, fax, maintenance etc. are not supported, so if you need these functions, you will need to connect your all-in-one directly to the computer.
The PC will need to have Bonjour for Windows installed. It's on the CD that came with the AirPort Extreme.

I have a pc running windows 7. I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport. The wireless router works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

I have a pc running windows 7. I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport. The Airport works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

+For now I have it set to Share Public IP address - Is this correct for my Network Setup with The Airport Extreme being the only router being used ?+
This would be the correct setting if the AirPort Extreme is connected to a simple modem (one ethernet port).
*Settings I have Enabled*
5 GHz name indicates that you have elected to use the option to assign a separate name to the 5 GHz network. This will allow you to "tell" compatible computers to connect to that network, rather than the slower 2.4 GHz network
Use Wide Channels is recommended for 5 GHz operation.
Interference Robustness often does more harm than good and should not be used unless you know you are in a area with a lot of wireless networks and you feel that your network is experiencing interference issues from a nearby network.

AirPort Extreme (802.11n) & Epson CX3100 Printer Problem

I recently purchased the new AirPort Extreme 802.11n and tried hooking up my Epson Stylus CX3100 to it. It detects the printer but it only prints the first few lines then stops. I check the status window of the printer and I see no error message whatsoever. I have to turn off the printer to force the paper out. The printer prints fine when connected directly to the iMac.
I was using the Gimp printer driver found in my iMac. Since that didin't work, I tried installing the new Intel drivers from Epson. But when I try adding it to me AEBS using the official driver, I get an Error: -9672 message.
I've already updated my AEBS's firmware to 7.1 before I tested the printer, so I'm not sure if it's a firmware issue.
Any help would be greatly appreciated.

Jgrboer wrote:
I try to setup my network with an Airport Extreme FW7.5.1 (from 2010), an Airport Express FW7.4.2 (from 2010) and an Imac.
Your iMac isn't receiving an IP address at all - the 169.254.x.x is "self-assigned" and indicates it is not receiving the IP address from any router. That won't work.
I'm not sure what you intend to do with the Express so leave it unplugged for now. Use Airport Utility, select your Airport Extreme, click "manual setup", then click the Base Station tab. Note the name of the wireless network it's creating.
Then click the Wireless tab. Make sure the Wireless Mode set to "create a wireless network". Next, consider using no Wireless Security at all, until you've sorted out your problems.
Next, click the Airport pane, then click the Internet pane, then click the Internet connection tab. Next to "Connection Sharing" select "share a public IP address".
Click the TCP/IP tab. Configure IPv4 "using DHCP".
Click Update and let it restart.
Make sure your iMac is connected to the wireless network created by your Extreme. It should then get an IP address of 10.0.1.1 and you should be able to connect.
If this works then we can configure your Express to do whatever you want it to do. If it doesn't work write back and we'll try to figure out what's wrong.

SERIOUSLY slow USB hard drive on the new Airport Extreme 802.11n

I have recently bought the new airport etreme 802.11n. Great little device, look wonderful on the office desk. I had some troubles getting it up and running on my machine but finaly got there in the end.
The USB hard drive is a great little addition that I was very excited about, untill I got it running. It is amazingly slow, for example I tried to copy a folder that contained 15 files which amounted to 135.6mb and it took 20 mins and 24 seconds to upload!
Is this just the speed that it should be uploading or is there somehting wrong with my settings.
I'm running on 3 bars of signal and the settings I'm using are:
connect with password (which is the same as the base stations password)
Automatically discover disks
Show in menu bar
If anyone knows the technical data for the transfer speeds and can confirm my queries I'd really appreciate it!
Thanks in advance

I have recently bought the new airport etreme
802.11n. Great little device, look wonderful on the
office desk. I had some troubles getting it up and
running on my machine but finaly got there in the
end.
The USB hard drive is a great little addition that I
was very excited about, untill I got it running. It
is amazingly slow, for example I tried to copy a
folder that contained 15 files which amounted to
135.6mb and it took 20 mins and 24 seconds to
upload!
Is this just the speed that it should be uploading or
is there somehting wrong with my settings.
I'm running on 3 bars of signal and the settings I'm
using are:
connect with password (which is the same as the base
stations password)
Automatically discover disks
Show in menu bar
If anyone knows the technical data for the transfer
speeds and can confirm my queries I'd really
appreciate it!
Thanks in advance
Does your drive meet these requirements?:
You can connect USB-based storage devices to an AirPort Extreme (802.11n). Learn which formats and protocols are supported.
The AirPort Extreme (802.11n) supports USB storage devices that have a block size of 512 bytes, and are formatted as Mac OS Extended (HFS-plus), FAT16, or FAT32. Not all USB storage devices use a block size of 512 bytes.
The AirPort Extreme (802.11n) shares storage devices based on the format used to initialize the storage device. For example, if HFS-plus formatting was used, AFP and SMB/CIFS protocols are used to share the device on the network. If FAT16 or FAT32 was used, SMB/CIFS protocols are used.
The AirPort Extreme (802.11n) works with disks that have a single partition and are not RAID volumes (no more than one volume per physical disk).
Note: Use AirPort Disk Utility to discover and mount AirPort Extreme-based volumes over the network.
William

Airport Extreme 802.11n sharing a disk with a -1 on the mount point

First I have to reboot the device once a day because of the disk that disconnect for no reason like many other on the list ever since I upgraded to 7.2.1 but not sure that as to do with this problem.
Here's is the deal, I have an Airport Extreme 802.11n with a 500GB shared on the USB port. I want to use my iPhoto Library on the 500GB. It's about 11GB, I have tranfered the library over and iPhoto is asking to choose the library I want to use. When I try to point it to the 500GB everything is greyed out. When I use a terminal and do a df command to show the mount point on my computer, I get
/Volumes/500GB-1
Why and where the -1 is coming from?
How can I get /Volumes/500GB only?
One thing I have noticed about the -1 is when I loose the disk connection it prompt me to disconnect 500GB-1 but sometime even with a -2 and -3.
Thx!

can I hook up my printer, scanner and external harddrive through a usb hub?
Partially, a large number of USB printers will work with the AirPort Base Stations' USB port, but not all. I suggest that you checkout the following iFelix site to see if your printer is compatible. Similiarly, most external USB hard drives should work as well.
However, devices that rely on two-way communications, like copiers and scanners, won't work when connected to the USB port.

Airport Extreme 802.11n

Airport Extreme 802.11n.
I now have 802.11g airport router and wish to up grade to n. I have a new Macbook Pro and MacBook Air with n capability. Also have a wireless printer, air express and a wi-fi sony blue ray player. Am I going to have problems switching all these over?

In addition to Bob's remarks:
If it works now on your "g" network, it will work on the new one. But: you don't want the down compatibility from n to g.
Especially if you have the new Extreme with the 2 bands (2.4 and 5GHZ): the 5GHz band, although a somewhat lower sending power/reach is MUCH faster.
Like Bob said (he is the WIFI master) the printer and bluray player may have their own "specialty" behaviour.
The printer probably will not give a problem if you do not use its own wireless but connect it to the extreme with usb cable.
The bluray player I don't know, you should try it connected to the extreme.
Unlikely that, when connected directly, they will give problems.
Lex

Timed Access not working on new Airport Extreme (802.11n).

I bought a new Airport Extreme (802.11n) to use as a router for my network. The network has a mixture of Macs and PCs, using a mixture of wired and wireless connections.
I configured the security settings with on the Airport Extreme to Timed Access. I set the default setting is to No Access.
Three computers are set with "Everyday, Between 8:00am and 11:00pm"; however, when it's 11:00pm, nothing happens. The three computers continue to have access.
I know the MAC addresses I entered are correct. Does anyone know why the Timed Access is not working?

Yes, the printer was initially set the same way it always was on my old router. It used to pop right up on the list. After I switched I was getting communication errors. Ok, new setup, I wasn't worried yet. When I got to the setup window and it a new printer wasn't found I tried updating drivers. No luck. I then used the IPP mode to enter the IP address with the address on the Canon screen. It failed. I then did the same setup telling it which software from the driver list to use. It still could not see it. The odd part is that the Canon can obviously see the router as its LAN setting read active and it is receiving the IP. I have proceeded to play with every setting on the printer and it is back to factory reset. Oh, I should mention that I have also tried to use Canons network setup utility software and it can not find the connection either. So I really think this is a problem within the router. I have seen many complaints about this on other forums, but most were looking to use the usb on the print server. My Airport is nowhere near my printer and I don't want to lose my all-in-one functions. Some think hard lined ethernet is ancient, but it really is a nice setup. Fast and reliable.

Not able to see disk connected to AirPort Extreme 802.11n

I just installed my AirPort Extreme 802.11n Wireless Base station. Wireless internet works like a charm, however, I cannot see my external hard disk when it is connected to the base station (amber light blinking and when checking the problem, I am told that "Disk needs repair"). When connecting the hard disk directly to the PC, I have no problem seeing the data. Any tips or tricks out there... ?
AirPort Extreme 802.11n Windows XP

I finally got my 500 GB Western Digital MyBook USB drive to work by reformatting it to HFS+ format.
Of course, before I could do that, I had to copy all my files onto another hard drive. That job took a day to accomplish.
I work with Poser, and have a lot of content installed... We're talking thousands of files.
Once the drive was reformatted to HFS+ format, I copied everything back over. That took another day. Then I connected to the AEBS.
The USB drive was immediately recognized. It was incredibly easy to access the USB drive on my PCs. It required no effort on my part, except to supply the password.
In the end, I've decided this effort is a failure.
The drive is way too slow for my needs. Also, one of my vital Poser utilities (CorrectReference Pro) will not work properly with the USB drive on the AEBS.
I am currently in the process of copying all those files over to two external USB hard drives attached to my other PC.
Then I plan to unmount my 500 GB MyBook drive, and reformat it back to NTFS. I'll let the Notebook PC have it on a direct connection again.
I have a couple "junk" External Hard drives that are 160 GB. Maybe I'll use one of those as an Airport disk...
But I won't be using the Airport disk for anything important. It's too slow.

Help needed connecting Iomega Minimax Ext HDD to Airport Extreme 802.11n

Would appreciate if someone can help me with the following task. After researching and trying several things, I have not succeed in resolving the issue.
I want to connect a Iomega MiniMax Ext HDD (for Mac) to my (Airport Extreme 802.11n + Time Capsule) box using the USB port at the back of my Airport Extreme. Then I want to access the Ext HDD wirelessly as a drive on my Macbook (snow leopard OS). I was told this was possible at the Apple Store...but have failed so far.
Any suggestions so far

Hello smitra. Welcome to the Apple Discussions!
The following are the basic steps for sharing an external USB drive attached to either an 802.11n AirPort Extreme Base Station (AEBSn) or a Time Capsule (TC):
o Plug the hard disk into the USB port on the back of the base station.
o Open AirPort Utility, located in the Utilities folder in the Applications folder on a Mac, and in Start > All Programs > AirPort on a computer using Windows
o Select your base station, and then, choose Manual Setup from the Base Station menu.
o Click Disks in the toolbar, and then, click File Sharing.
o Choose “With a disk password,” or “With base station password” if you want to secure the shared disk with a password, or choose “With accounts” if you want to secure the disk using accounts. If you choose to use accounts, click Configure Accounts, click the Add "+" button, and then enter a name and password for each user that will access the disk. For simplicity, I would recommend using the "With a disk password" option.
o Choose “Not allowed,” “Read only,” or “Read and write” to assign guest access to the disk.
o Select the “Share disks over Ethernet WAN port” checkbox if you want to provide remote access to the disk over the WAN port.
You should now be able to find this drive within Finder under the SHARED category.

Installing Airport Extreme 802.11n card in eMac killed keyboard?

Hello,
I got an Airport Extreme 802.11n base station and card for my eMac (which I want to run in the next room from my new Mac Pro) from local Apple Store yesterday.
I read and followed the card installation instructions exactly. - This included installing the software from the CD.* - But as soon as I installed the card, my mouse and keyboard lost contact with the eMac. (Totally unresponsive to key commands or mouse movement.)
I shut down my eMac and my (new) Philips DSL modem: both of these have shown no symptoms up to the time of the card installation. I un-installed the card and waited 5-minutes. Modem and eMac came back normally and so did my keyboard and mouse.
Just prior to installation, I ran DiskWarrior and Repair Permissions. Also: I unplugged and "re-plugged" the USB keyboard and mouse before shutting down of eMac & modem - this made no difference.
* I did notice: The documentation for the base station says the eMac needs Airport Setup Assistant 5.2. The eMac has Airport Setup Assistant 4.2. Yet - when I ran the installation program, it recognized and reported as updated Airport Setup Assistant 4.2.
Anyone have a solution to my loss of keyboard and mouse with card installed? Please - the Mac Pro arrives tomorrow.
Message was edited by: macnoel

I'm answering my own question:
I got around to simply trying a second time to install the Airport Extreme card in this eMac. This time - I shut it down before starting installation of the card.
I suspected that shutting down would be a good idea - since it seems very likely that the System needs to load whatever drivers or extensions are needed to enable Airport. But the instruction either did not mention shutting down before installing the card or I missed mention of it in my haste to complete this and numerous other tasks before day's end.
Anyway - that seems to be what happened because bootup was normal and the mouse cursor and keyboard worked as soon as the desktop appeared.
Now - I proceed to setup the base station and test it on the eMac. If all goes as I hope - in 36 hours I'll have both this old eMac and the new Mac Pro living happily in their separate rooms.

User Contributed Tips in the AirPort AirPort Extreme (802.11n) forum

*The following User Contributed Tips are located in the AirPort > AirPort Extreme (802.11n) forum:*
adsfushi72 - What does this acronym mean?
http://discussions.apple.com/thread.jspa?threadID=2450065
Publish date: June 4, 2010
William Kucharski - Having issues with your AirPort connection? Please be specific.
http://discussions.apple.com/thread.jspa?threadID=2227197
Publish date: Nov 21, 2009
William Kucharski - Apple AirPort drivers only support a WEP key index of 1
http://discussions.apple.com/thread.jspa?threadID=1654663
Publish date: Oct 16, 2008
*The following related tips are located in other areas of Apple Discussions:*
a brody - Airport, 10.5.8, and MacBook and MacBook Pros and slow internet
http://discussions.apple.com/thread.jspa?threadID=2291464
Publish date: January 7, 2010
Rich Love - Airport and Roadrunner (Jan 6, 2002)
http://discussions.apple.com/thread.jspa?threadID=121815
Mark Lansdown - Semi-wireless Wake on Lan (Oct 8, 2008)
http://discussions.apple.com/thread.jspa?threadID=1276830
Pondini - Using Time MACHINE with a USB drive connected to an Airport Extreme
http://discussions.apple.com/thread.jspa?threadID=2299608
Publish date: January 14, 2010
See also the User Tips Library

Ask yourself a question.
How fast is your internet connection?
If it is is 1-2-8 mb speed then you dont need 'n'.
If you transfer personal info between computers fast speeds allowed up to 54 will save you time.
'n' is to provide greater range like Mimo and increased transfer speeds.
But do you really need it?
No,if you dont transfer huge data,
Yes, if you want to transfer (stream video from your iTV from Mac if you spend most of your day in front of TV.
There is no substitute for a good reliable connection.
In my real world experience because I only have a 8mb ADSL connection 'g' is not the strongest and most reliable scenario to use. During the last airport update my last 3 years of uninterrupted airport connections mixed PC and Macs on WDS set up went belly up and I had posted my thoughts as well with the relevant results and now set up is fine. But at a price.
Downgraded to all on 'b' and now use my Draytek Vigor 2800VG and have AEBS put away in storage.
My signal and range is out of this world. When I decide that I have enough free time to sit in front of a TV and download movies and watch them when I have nothing better to do such as travel the world etc. etc., that is the time I will go for speed...or will I.
Dont get bamboozled by the hype. If you really want one wait for a year then decide. Let others solve the teething problems as is there want.

Can I add an extra Ethernet port to my AirPort Extreme (802.11n)???

hi all.
I have an Apple AirPort Extreme (802.11n). On the back I have 3 Ethernet ports. All the 3 ports are used (one for an Ethernet Printer, One is connected to my computer and one is connected to my wife's computer. I need an additional Ethernet port for a music server. I have no idea of how to extend the Ethernet ports number.
Thanks for any Help
David - Canada

Hello David Gershon1. Welcome to the Apple Discussions!
You could simply add a multi-port Ethernet switch to any of the 802.11n AirPort Extreme Base Station's (AEBSn) LAN ports to increase the number of available ports. An example would be the Linksys EZXS55W.

USB Printing AirPort Extreme 802.11n

Similar Messages

Maybe you are looking for