USB Prob. MSI Nforce K7n2 Delta-IL part# 6729

hello people,
first of all what the hell is the K7n2 Delta-IL part# 6729???
it seems that my dealer gave an oem product. is this right?
i cant find that motherboard on the msi site at all.
second: i am not able to install usb since there is no usb driver on the cd which came with the board. there is only a english version but i need the german version.
i installed msi live monitor and updatet the latest nvidia driver version with no luck. i am downloaded the driver from the nvidia site with no luck.
so i guess the usb is from a 3. party company and i just need to know what it is.
i find this really really strange especialy i bought 6 boards!!!
please help
thanx alot

Quote
Originally posted by wonkanoby
if xp or 2000 they are in service packs
yes they are oem boards,i would back it as bios updates will be very scarce
i have a german oem xp home incl. service pack 1
and all updates from the microsoft page. usb is still yellow :(
damn
this sux

Similar Messages

[nForce] K7N2 Delta 2 LSR boot/power up issues

I installed the K7N2 Delta LSR mb with an Athlon XP socket A 3000+ cpu. The computer turns on but won't boot. Nothing appears on the monitor screen and there are no beeps. The harddrive spins, the board has power but nothing happens. When I put my old mother board back (MSI K7T Pro266A) in with the Athlon 2000+, everything works fine.
Maxtor 60 gb harddrive
512 MB SD pc2100 SD Ram
Abit 128 mb Radeon 9200SE Video card
Any suggestions?

A few things to check:
Do you have any unused stand offs in the case touching the motherboard
The XP3000 CPU is a barton core and comes in two variants, a 333FSB and a 400FSB version. Your RAM is PC2100 which with an Nforce chipset is a recipie for problems. The NForce chipset is picky about RAM and PC2100 running on a PC2700/PC3200 processor FSB probably won't work.
Also post your PSU max amps, as a +12V rail below 16A could cause problems.
Do you have a D-Bracket connected ? This is the PCI insert with 4 leds on ?

[nForce] K7N2 Delta Premium stuck at Chipset Initialisation

Hi there, I'm new to these boards, how do you all do?
As stated in the subject I'm having trouble with a new K7N2 Delta Premium which is stuck at Chipset Initialisation. I'm not going to write out a long explenation here as I have been battling with this for a week and I have a thread in another forum where lots has already been discussed. Hopefully it will save time in people suggesting stuff that's already been tried etc. Here's the link.
Thanks in Advance,
Matt

Sorry Richard but it had been a long day and I just wanted to get a quick post in before going to bed and hopefully some answers by morning.
I'll hold back on the sig for the moment if you don't mind as I haven't yet got a working PC with an MSI board and am using components swapped, borrowed and thieved from other PCs so to list it all probably wouldn't fit
Here's a list of everything I've used so far.
AMD Athlon XP-M 2200+
AMD Athlon 800
ASRock K7-Upgrade
MSI K7N2-Delta Premium
2*256MB PC2700 (Generic)
2*512MB PC2700 Kingston Value RAM (Sourced from an ASUS A7N8X-E Deluxe based PC with an AMD Sempron 2800+)
GeForce4 Ti4200 64MB
Radeon 9600Pro 256MB (Sourced from an ASUS A7N8X-E Deluxe based PC with an AMD Sempron 2800+)
120GB IDE HDD
Lite-On 16x DVD-ROM
Lite-On 32x CD-RW
Asus TV FM Card
300W PSU (Spare) (3.3V = 15A, 5V = 35A, 12V = 11A)
350W PSU (Original)
350W TaurusX PSU (3.3v = 20A, 5V = 33A, 12V = 18A) (Sourced from an ASUS A7N8X-E Deluxe based PC with an AMD Sempron 2800+)
Any combination of all the above components produces the same result, all items power up and the motherboard stays in Chipset Initialisation mode. All components have been tested and are known to work in other PCs (namely the ASUS A7N8X-E Deluxe based one) except the 2 motherboards and CPUs.
Now for a slightly condensed version of all my posts from the other Forum:
Quote
On monday I turned the PC (configured using the ASRock mobo, Athlon XP-M, Ti4200, Generic RAM and 350W PSU) and it booted to the welcome screen fine except I had no response from my keyboard and mouse. Being wireless models I scanned for a different channel but no luck so I tried the reset switch on my case. The computer began to boot and nothing happened. The monitor wouldn't come on and the PC just sat there with the HD light stuck on.
I left it and took the PC to work the next day (I work in an IT department so could 'borrow' a few spares to try out). At work I swaped out the graphics card (it's hadn't been initialising properly when I used drivers other than those that came with windows, stuck at 4 colours at 640*480) for an FX 5200, no change. I swapped the graphics cards back and took out a stick of RAM, no change. I swapped the two RAM sticks around and the PC booted, great, I thought, faulty memory, at least it works I'll buy a replacement the weekend.
Took the PC home and turned it on again, same problem as before. I tried swapping both sticks of RAM in and out as well as re-seating the graphics card, no change. I tried the RAM and graphics card in another PC and it booted fine so I thought, dead mobo.
Today I go to the local computer fair and buythe MSI mobo. I reinstall everything and turn the PC on, same as before, only the diagnostic LEDs tell me the board is stuck in 'chipset initialisation mode'. I try chopping and changing the RAM again and try the Radeon from one of my other PCs, no change. Wonderful, I now have the feeling that my lovely 2 week old XP-M 2200+ that I hadn't had a chance to play with yet has broken so I swap it out for the Athlon 800. Hallelujah the PC boots first time and I go straight into the BIOS. I check all the settings and enable/disable the onboard peripherals I do/don't want/need. Restart the PC and it's back into Chipset Initialisation mode again. Doh! So I know think I messed up on the BIOS settings somewhere so I reset it, no change. I reset it again (this time removing the battery from the board as well as unplugging the mains and setting the jumper), no change. I try swapping out the RAM and graphics card again, still no luck.
Quote
All my testing is performed on the desk for my second PC which uses a standard MS wired desktop.
I've tried pairing the PC down to just CPU, RAM, graphics card. When the PC was first tried with the XP-M 2200+ and the MSI board I even tried it with just a Graphics card and with just RAM, same result.
All components apart from the CPUs and TV Tuner have been swapped out with components in another PC and that PC booted with each one of them in and is still booting now.
Tommorrow I'll try the TaurusX PSU and try the board layed out on the table and see how it goes.
Quote
I've tried swapping the power supply and it still wouldn't boot. On a whim I removed a memory stick, yes it booted. I left the pc for a while sat in the BIOS and all was good. I took the risk and swapped the CPU for the better XP-M 2200+. This booted first time too, infact it booted with both memory sticks in. Great, it was a dodgy power supply, except that power supply is now in the ASUS A7N8X-E Deluxe PC I was robbing parts from and working fine.
After leaving the PC sat in the BIOS HW monitor for a while watching CPU temps I decided to restart and get on with installing windows. Doh! back to chipset initialisation mode again
Next step..... try it out of the case on my dining room table.
Quote
I've now tried the MSI motherboard on my desk (wooden) with just the XP-M 2200+, Ti4200, Kingston Memory, hard drive and Diagnostic LED bracket connected. It results in the same problem (and this is with yet another power supply to the previous two being used, the 300W one) as well as the TaurusX PSU, the PC sits at Chipset initialisation stage.
Some more info for you. Whilst researching a problem on a PC at work (uses a K7N2 board), I found people stating that the nForce2 chipset has problems with certain types of memory (news to me, I've got two other nForce2 based PCs both A7N8X-E Deluxes). So I decided to try yet again to boot one of my other PCs with this memory, both dimms managed so fine. I also decided to run a proper overnight memtest on the dimms indivdually, the first one went almost 8 hours and 56 tests with no errors, the second one had done one test by the time I left for work this morning, again no problems.
I'm scraping the bottom of the barrel here and am simply running out of ideas. All that I can think to do now is try both the XP-M 2200+ and Athlon 800 CPUs in one of my working nForce2 PCs (which I am reluctant to do cos I'm idle).
Quote
OK, another update. Got home about quarter to 2 and the second 256MB DIMM had gone through 50 tests without errors so the memory is fine (and is fine with nForce2 mobos as that's what I tested in).
I've used two different keyboard and mouse sets, the wired one on my second PC and the wireless one (which also works conected up to my second PC). No difference, the system is barely getting far enough to even think about keyboard and mouse. Hell it's not even getting far enough to complain about missing memory or graphics card.
I still don't have any real idea as to why the first motherboard 'failed' like it did anyway and the only two components that I can't completely rule out are the CPUs and motherboards. I do have an Athlon XP 2800+ with what appears to be a cracked core (though oddly enough the PC always booted with it installed, it was just highly unstable with lots of memory errors) that I could try if I really felt like it.
I haven't tried the 'cracked' XP 2800+ yet and I'm about to try the ASRock motherboard with the Athlon 800 again. As I've said in the quotes above, I'm completely dry when it comes to ideas now and am hoping an MSI specific forum might be able to help me more.

[nforce] K7N2 Delta, having massive lock-ups / random reboots.

Hi all, it's been a while since I last needed your wisdom. Anyway, a couple of days ago my machine began to randomly reboot on me, so I went about trying to figure out what is causing the problem. I've cycled out my PSU, my drives, changed BIOS settings, so on and so forth, and it's still happening. System Specs follow:
MSI K7N2 Delta Mobo
Athlon 2800+ Processor
512 x 2 Kingston ValuRAM PC3200
Generic PSU : 3.3v : 28a, 5v: 30a
EVGA Nvidia Geforce 5950 Ultra 256 MB
Seagate 200GB 7200 RPM Hard drive
Lite-on DVD/CDRW Combo burner
Any ideas? I've been dismantling this thing and rebuilding it over and over for about a week now, and nothing has changed. I get the reboots all the time, graphic-intensive and not. I've even had the machine freeze up in the BIOS menu before. Help me please!!!

Quote from: sickfallout on 19-May-05, 02:38:49
Alright, thanks a lot guys for all your help!
Hi there..
I'm not sure if you have fixed the problem or not.....but i have the same board and my pc reboot maybe one or two times a day...
and i'm sure it is my Ram, and i also use 2x512mb Kingston Value pc3200
i have tried with 2x512mb crucial pc3200 from my other pc and then there is no problem...
ps. I haven't been writing in english for a long time.

[nForce] K7N2 Delta ILSR? is my computer specs outta date as today? or should I build a..

IS MY COMPUTER OUT OF DATE?(MSI K7N2 Delta ILSR) (hint: look at my signature), and if it is can someone make me a good list of things to get to make a new GOOD custom computer? motherboard etc,,, for a gaming pc under 500 US dollars?

Outdated for what? What pushes you for an update? Your system will work fine for most things for a couple of years still. I'd remove that extra 128 MB stick though.
The newest games is relying heavily on the graphics card. I don't know that processor, but that will cope with today's games for sure.

[nForce] K7N2 delta ilsr doesnt post

I am using this mother board with ati radeon 9000 for 2 years. Today i bought a new msi rx9550 video card
I installed it and power up but it didnt post
no signal and no boot
i put on the old radeon 9000 and i booted without any problem
new 9550 works fine on another computer with old psu
any suggestions ?

no signal no post
fans spins hdd and power light are ok
i tried it with a good psu today no way it doenst post
i also updated the mobos bios with modded bios version which i found in this forum
i tried with asus and sapphire 9550 cards and no boot again
but it boots with radeon 9000
i also tried a cooler master psu with 18A 12v rail but nope
it does not post with any radeon 9550 cards
i removed all psu connections to hdd dvd ect and only let mobos connection
no boot again
in the bios agp voltages seems to be shift between 1.5 1.6 and 1.7
no 0.8 for agp 8x
might it be a problem?
I am realy disappointed with this mobo
i bought it 2 years ago because i tought this mobo can be used for long years
heh
I am desperetaly seeking your suggestions
my computer:
msi k7n2 delta ilsr mobo
2x256 oem ram
80gb seagate sata
40 gb seage ide
64mb ati radeon 9000 video card
amd athlon xp 1800+ cpu
msi dvd rom
nec dvd writer
and an psu with 4pin 12v rail

[nForce] K7N2 Delta-ILSR ...did i kill my motherboard??????

ok i have K7N2 Delta-ILSR and i moving my computer from my bedroom to my basment because of construction and when i went to plug my computer into my apc powerbar the plug didnt go all the way in the socket and then a flash of electricty, when seeing this i wasn't sure what to think so i went ahead and pluged it into the powerbar socket next to it, then when i hit power button on my computer it gets power but wont post and the D-Bracket that came with my board that has diagnostic LEDs is saying " Memory Detection Test " i tried changing my stick of ram(Samsung PC3200 512mb DDR400) from all the slots and the same results then i tried a stick of corsair ram and the same results. I also tried clearing cmos, and having my settings on safe mode.
Specs - Thermaltake Xaser III 480w, eVGA 6800 128mb, athlon xp 2800+ 333mhz, samsung pc3200 400mhz cas 3

Do you have a different power supply you can test?
You did unplug the power supply before clearing the CMOS right?
Have you checked the stickies? Especially this one? https://forum-en.msi.com/index.php?topic=64248.0

[nForce] K7N2 Delta ILSR - Do i have to have raid with sata drive

Hi guys,
Probably a really stupid question, but here goes
My machine has 1 ide HDD and 1 SATA HDD.
The SATA drive is set up as raid0 and is purely used as a data disk. The OS(win xp pro sp1) is on the IDE drive
The only way i could get the SATA HDD recognised by windows, was to set up a raid array with just the 1 disk.
Pretty useless raid array i know.
Did i have to do this or is there a way to have the sata hdd usable without having to set up a raid array
Thanks
John L
MSI K7N2 DELTA ILSR
ATHLON XP 2500 Barton
2X512 MB PC3200
Leadtek GF4mx460
WD 8MB CACHE 80Gb IDE
Samsung 120Gb Sata

you have to do it for the controller to work
but it has no effect on the drive
you can move a regular drive on ide 3 back to a normal ide and its all fine

[nForce] K7N2 Delta Upgrade Possibilities

I think I fried the AGP slot on my K7N2 Delta-L mobo and was looking to upgrade to a new board, perhaps the Delta 2 Platinum. Would there be any conflicts with using my old peripherals/modules from the old mobo if I upgraded? Here is what I currently have installed:
Athlon XP 2700+ 333FSB
Nvidia 6600
2X 512 Corsair XMS2700 CL2
Soundblaster Live Platinum w/LiveDrive
Oh and if you can think of any way of troubleshooting my old board that would definitely be appreciated. (Swapped out video cards and still no signal going to the monitor. Swapped monitor and cables as well and still no picture.)

There were a couple things that were awry. I was going to swap a fan in my case and it was daisey-chained off the supply that also went to my video card. I am almost positive that my PC was unplugged when doing this. I unplugged the fan and then booted back up. Windows came up but all of the graphics were a shade of blue. I quickly shut down and checked everything and it appeared that my VGA line was not secured properly(I had recently moved my PC). Resecured it and replug the fan and received no signal to the monitor. I swapped out my video card with my old one and still no signal. Attached my PC to a different monitor and cable and again no signal.
Any ideas? I will check the d-bracket when I get home from work today and see if it is reporting anything unusual.

[nForce] K7N2 delta-l + Corsair 2*256 3200c2 = cl2.5 ?????

Hi!
My english is not perfect .
I have a problem, could anyone help me please?
I have a mobo: k7n2 delta-l, and a bought 2 pairs of Corsair 256 3200c2 ram, whis came with cl2.
But CL2 don't work in my mobo. CL2.5 works.
My friend told me, i have to set ddram voltage to 2.8, but my mobo's highest value is 2.7 .
What should i set in bios?
Any ideas? THX.

There isn't any freezes @ 200 MHz. I tried it with prime95, before i bought the 2 Corsair Rams with two 333mhz rams. And by CL2,5 ( with Corsairs ) there isn't any freezes too.
My friend told me, ( he had Corsairs in Abit NF7 (nforce2) and he had no problems with 5-3-3-2 @ 2,8V ), i have to set the memory voltage to 2,8V. But my mobo's max. voltage is 2,7.
Is there a big difference between 6-3-3-2 and 6-3-3-2,5 ?

[nForce] K7n2 delta 2lsr

I have this motherboard (K7N2 Delta 2 LSR) and a friend build my computer and put 2 hard drives(one master and one slave) and 2 optical drive on the same ribbon connect to IDE 1. i was wonder should change this. maybe use the IDE 2. if so what should i put there and how do i do this without destroying my computer. Should i change some with the BIOS or CMOS.
Please explain you would to a non tech person(because i'm)
thanks
g

Hi, welcome to the fourm.
In general your system will work best with the two HDD's as master and slave ono IDE1 and the opticals on IDE2 (burner as master if you have a burner). Make sure the jumpers on all four drives are set correctly to their positions. Then when you start up, go into BIOS and see if all four drives are correctly identified. No need to clear CMOS. Good luck.

[nForce] K7N2 Delta -ILSR Fan that read "MSI AGP 8x" broke.

My fan had made some noises throughout the week but it seemed when i turned the computer off and then back on it would stop I checked inside and it was working perfectly today it made a outrageously loud noise like it was about to blow up and sure enough it stopped working. If your not sure which fan it was, it was the fan located on the motherboard directly that was the smaller one with a purple label and words that were outlined in silver reading "MSI AGP 8X." Any help will be appreciated! Should I get a new motherboard? Is their away I can fix the fan? Can I buy a new fan?

Quote from: IronCatt on 02-October-05, 10:52:54
Vantec Iceberq; cheap, quiet and effective.
Yes

MSI nForce K7N2 BIOS FSB question

I recently bought an MSI K7N2-ILSR Delta motherboard which supports a FSB setting of 400 MHz. I also purchased an AMD Athlon XP "Barton" 3000+ with a FSB of 400 Mhz. I was looking in the users guide of the motherboard and in Advanced Chipset Features in the CPU FSB Clock setting...it says that you can input 100~200 Mhz...is your FSB double the amount you put for this field??
Thanks,
Travis

the fsb works with ddr methods.
double data rate.
that means data is sent twice each clock cycle.
100mhz real frequency is 200mhz virtual frequency.
200 is 400.

[nForce] K7N2 Delta 2

I just bouth an MSI K7N2 Delta2. I put in a Sempron 2400+. I could get to the bios screen, but not boot because my harddrive was formated on an older Athlon board with a different chipset. At the time I did not know this. . .
A friend said that I need to set the FSB to 400MHz instead of 333. It ran for 10 seconds and it will not run anymore. No video, no beeps, no nothing. I have taken everyting out, tried to just POST with the CPU, then just CPU and video, etc. Still nothing.
Is it possible to fry a motherboard for 10 seconds of 400Mhz

look in your other topic where i have answered, it is probably your PSU that has gone.
you can ask more than one question in a topic if they are related, it keeps things tidy and stops confusing everyone when they have to look in different threads to find info

USB 2.0 on K7N2 Delta ILSR

Hi there !
I have a problem with USB 2.0 on my motherboard.
I understand now I need Win XP Service PAck 2 loaded to be able to get the USB 2.0 support.
I installed a few month ago the Nvivia drivers (coming from the nvidia web site), and my USB port is working finr.
Today; Windows update is proposing to install service pack 2 (It was not installed yet). I just installed it, but what should I do for USB 2.0 support ?
Reload the nvidia Drivers ?
How can I check I have USB 2.0 now or USB 1.0 ?
Many Thanks!!

Quote from: cdelecole on 27-December-05, 01:58:01
Concentrateur USB Racine
Concentrateur USB Racine
Concentrateur USB Racine
Controleur hote PCI vers USB Standard etendu
Controleur hote USB OpenHCD Standard
Controleur hote USB OpenHCD Standard
not that i know any french, but i am guessing by comparing to mine that "etendu" translates to "enhanced",
and according to this page, having the word "enhanced" in there is all the verification you need.
(mine is working and reads "standard enhanced pci to usb host controller")

USB Prob. MSI Nforce K7n2 Delta-IL part# 6729

Similar Messages

Maybe you are looking for