USB Reciever for CB8100

I lost my USB receiver for my CB8100 Wireless Headphones. Creative Labs does not sell them anymore and will not give me any specs for a third party reciever. Can anyone help me find where to go and what to purchase in place of the original?

Yamaha RX-V373
Disclosure: Former BBY employee.

Similar Messages

USB Device for IPOD not recognized by Windows, whether ipod connected or no

During the past few days I have received a pop up error message from (I would think) Windows that the USB device is not recognized. I have the USB plug for the ipod connected (as always)but the ipod isn't even connected. It keeps popping up like every few seconds that the usb device is not recognized.
When I attach the ipod itself, the ipod is recognizing it because it powers up. But, it took 10 times just to get the ipod to recognize through itunes. It updated, then immediately upon completion, windows again starting giving repeated error messages that the usb device wasn't recognized.
I have downloaded the newest itunes but I had it on my system for 4 days with no problems whatsoever. I don't think that's it. No other system changes.
I've deleted my temp files and cache. Also did a "disk clean up" and "defrag." It's still doing it.
Any suggestions?

I'm having the same problem. Ever since I upgraded to version 7, iTunes & my PC no longer recognise my iPod, and it therefore won't sync.
It's not the USB port (other devices work in it), I rebooted my iPod and re-installed iTunes, I've tried stopping and starting the iPod Service (but can't see my iPod in My Computer). When I run the Diagnostics it says iPod connection failed. I've even bought a new USB cable but that doesn't work either.
This is driving me up the wall. Is there a glitch with iTunes 7?
Can anyone help me out?? Thanks
Windows XP

My ipod won't show up on my computer. I have another ipod touch, that works fine. What should I do? Do I need a different ipo usb cord for the nano?

my ipod won't show up on my computer. I have another ipod touch, that works fine. What should I do? Do I need a different ipo usb cord for the nano?

iTunes never displays the iPod in the left pane?
iTunes is shipped with a "helper application" called the "iPod Service" that runs and is used by iTunes to communicate with the iPod device. This service may be disabled.
If your system is Microsoft Windows XP and you are logged in as an Administrator:
1. Quit iTunes and, if your iPod is currently connected to your computer, safely remove it using the system tray application to manage removable devices.
2. Right click on "My Computer"
3. Select "Manage"
4. In the "Computer Management" window, left pane (tree view), follow this path:
+Computer Management (local) > Services and Applications > Services+.
5. In the right pane, scroll down to "iPod Service" and double click it.
6. If the service is listed as "Disabled" and "Stopped," change to "Manual" and "Start" it. ("Manual" will cause it to start when iTunes starts and "Start" starts the service right now.)
7. Close "Computer Management"
8. Restart iTunes and wait for it to completely come up.
9. Reconnect your iPod.
Does your iPod show up in iTunes?

Using cell phone as a 3G USB modem for Leopard

Hi All,
I just get an MacBook Pro the last week, I was happy with the UI of the OS at first sight, but when come to the setting of the network, I am really frustrated.
I get a SE P1i cell phone, I would like to use it as a usb modem for my MAC so that I can have 3G internet connection when on the road. But the problem is that, I can't connect it to my MAC at all!
Leopard can regonize my phone but it seems that none of the modem script(including the SONY ERICSSON script pre-installed) work for my phone. when I checked in the activity log, I see that the result of running every modem scripts are
"CCLExit: -6019 (Modem error, modem not responding.)"
I guess it should not be the problem of my phone as I try using SE K800i, the same result...
although I know that I can use the bluetooth rather the USB cable to connect them together, I would prefer USB cable as it is faster and more secure.
anyway, any help would be appreciated.

detailed instructions:
http://blog.evandavey.com/2008/02/how-to-connect-huawei-e220-usb-modem.html
scripts (and instructions):
http://www.taniwha.org.uk/
(generally I understand one does the same as with a bluetooth phone, but plugs in the usb cable and skips the bluetooth part)

Is it possible to have two USB drives for the IPad? I want to bring RAW photo files from my camera, through the IPad and back to an external hard drive. One of my cameras does not use an SD card. How can I do this?

Is it possible to have two USB drives for the IPad? I want to bring RAW files from my camera through the IPad and out to an external hard drive. One of my cameras has an SD card but the other one doesn't have a card that would fit in any of the camera devices I've seen on line. Realted to this, I bought the IPad camera accessory. Can I put the SD card in the device and also hook the external hard drive to the USB port of the accessory and download from the camera to the hard drive? Can I put Lightroom or the Nikon photo editing software on the IPad? Right now I carry a PC laptop and external hard drives with me on wildernes trips. Internet and WiFi are not available. Because I shoot so many photos and they're in RAW I need to download from the camera to the external drive because I run out of memory on the PC (and it has much more memory than the IPad). I have Nikon NX software and lightroom on my PC. I'd love to be able to reduce the weight I carry by using the IPad to edit my photos each night while on trips. Is this possible and how would I do it? I'd appreciate any guidance.

No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

How do I create a disk image for windows 7, using a windows computer for USB bootcamp for mac?

Hi There, I have just bought a new 2013 iMac.
Spec: 3.4 GHz intel core i5, 16GB 1600 MHz DDR3 Memory , NVIDIA GeForce GTX 775M 2048 MB Graphics with OS X 10.9.4.
How can I create a 'disk image' from a windows 7 professional 64bit installation DVD using a windows laptop with windows 7 Operating system on? I want to transfer this 'disk image' (ISO?) to a USB ready for installing windows onto my 2013 iMac using bootcamp? I want to use bootcamp from a USB as I have no disk drive for the installation DVD on my iMac. I hope all this is clear.
Thank you. Joe

Yes, that's correct, at least not directly. You can create a blank disk image, copy the file to the mounted disk image, then burn the image to a CD/DVD.
Open Disk Utility and select Blank Disk Image from the New menu. Provide a name, Save location, and select the image size from the drop down menu. Leave Encryptions at None and Format as read/write. Click on the Create button.
After the image file appears the "removable" disk should be automatically mounted. If not double-click on it to mount it. A "removable" disk icon will appear. Drag the file you want to place on the disk image to the "removable" disk icon. The eject the "removable" disk icon. Now select the disk image file in the DU left side list and click on the Burn icon in the DU toolbar. Be sure to have a blank disc ready.
The above is actually the "long" way to do this. A much easier way is to simply insert a blank CD or DVD into the optical drive. The Finder will pop up a dialog asking what to do. Select the option to mount on the Desktop. You will now see a disc icon on the Desktop. Drag the file you want to burn to the CD/DVD, right-click or CTRL-click on the disc icon and select Burn from the contextual menu.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

How can i create a bootable usb sata for xp

how can i create a bootable usb sata for xp

Installing Windows XP on a portable USB hard drive is not supported.
Carey Frisch

I have a belkin 7 adapter for additional USB slots for my Mac Pro. It was working well till just recently I am getting a message that says the usb port on the Mac Pro is shutting down due to a very high power drain. Then it shuts the usb port down.

I have a belkin 7 adapter for additional usb ports for my mac pro. It worked fine without problems till recently when the message regarding usb port drawing too much power and the computer shuts the port on the mac pro down. The strip comes with its own power supply adapter. The attachments are additional hard drives used as backups and independent data. Other than disconnecting it are there any fixes?

You're getting the message because you're exceeding the available current, probably as a result of bus-powered drives. The power sources for hubs are rather small. Try using drives with their own power supplies.

64 Bit Windows7/8/8.1 USB drivers for Palm Desktop

Thanks to the great folks over at Aceeca.com (makers of NEW PalmOS Garnet devices), USB drivers for 64bit Vista, Windows 7, and Win 8 operating systems are available. There are many users reporting Palm Desktop 4.x is also working.
I have synced my TX to my Vista64 bit laptop, and Windows 8.1 HP Spectre X2 hybrid successfully via my USB cable.
The drivers are located here:
Aceeca Driver Downloads
Installation instructions (from Aceeca) for Windows 7 are included in the download.
Basic instructions:
1. Download the drivers and Extract them to the same folder. Remember the folder you extracted them to.
2. Try to HotSync your device. It will fail.
3. Open the Device Manager, and look for the Yellow Triangle next to either "Acceca" or "Palm Device" under "Other devices".
4. Right-click on the device, and choose "Update Driver Software".
5. Choose "Browse My Computer for Software" and direct it to the folder you extracted the Aceeca drivers to.
6. Choose "Next" at the driver file location window, and then tell it to "Always trust software from Aceeca Ltd." then click the "Install" button.
7. I received an error message (Vista64) that told me "The drivers were installed but the device couldn't be opened." I saw that my TX had timed out and went to sleep. I tried a HotSync and it worked!!!
Good luck!
NOTE: Palm Desktop 6.22 may only show Media and Install. Here's how to fix that:
If Palm Desktop 6.2.2 only shows Media and Install, try this: Right-click on the shortcut for Palm Desktop, then choose "Run as Administrator". The ther modules should appear.
To make Palm Desktop Run as Administrator every time in Windows 8/8.1:
Close Palm Desktop, if open. (This is a very important thing to always do when using 6.2.2 - it has been known to lose data when a computer is shut down without closing the program!)
Right Click on the Palm Desktop Icon in the Metro screen, then choose "Open File Location". You will now see the actual file for the shortcut.
Right-click on the "Palm Desktop" shortcut file, then Properties. Now pick the Compatibility Tab at the top.
At the bottom of the Compatibility Tab is a checkbox: "Run this Program as Administrator", Click OK .
Try opening Palm Desktop, all the parts should appear. You may see a box open when you close the program asking "Did the program run correctly?" I picked "Yes", and it's been working fine since then!
If you are using a much older PalmOS device and want to try using Palm Desktop 4.x, you will need this additional patch from Pimlico Software:
Palm HotSync Setup
WyreNut
Forum member bobboffin has added this post:
"After attempting your first HotSync and failing (as expected) you may be unable to find any trace of the device in Device Manager, making the next step quite difficult. This happened to me, and after some investigation I discovered the following tip that allows Device Manager to show hidden and non-present devices.
Open up Notepad and paste the following two lines into it:
set DEVMGR_SHOW_NONPRESENT_DEVICES=1
start devmgmt.msc
Save it as SetDev.bat into My Documents.
Open My Documents in Windows Explorer and double click on SetDev.bat. Device Manager should open.
In the View menu select Show Hidden Devices.
You may now see under the Other heading the failed device with a yellow triangle against it.
You can now proceed to install the drivers per the instructions.
Note that the driver supports most Palm OS versions. I'm actually using an Aceeca Meazura 1000 ruggedized PDA running OS 4.1 --- bobboffin"
Hope this helps!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!
This question was solved.
View Solution.

Thank you so much. I was thoroughly disappointed to see that the support telephone for paid support had been discontinued. I thought I would need to replace my (ancient but serviceable) Z22.
I followed the instructions listed here and am very happy to report that I completed a sync!
Thanks again.

I have a USB cable for my iPod touch 4th gen. I have tried almost everything to make my windows computer find my iPod touch but its not finding it. Any help on this issue?

I have a USB cable for my iPod touch 4th gen. I have tried almost everything to make my windows computer find my iPod touch but its not finding it. Any help on this issue?

If not successful:
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Try another USB port and cable
Try another computer to help determine if you have an iPod or computer problem

I cant make a bootable (usb/dvd) for windows 8.1 pro 64 bit

right now i am using windows 8.1 pro 32 bit ,, want to change to 64 bit , my CPU is 64 bit and i have 4 GB ram (i know i should have more ram ,, but i dont do this upgrade for the ram , but because some emulators , and some application
ask 64 bit) so i used every possible way on my computer , using windows 7 download tool , rufus , etc programs to make the usb , imgburn for dvd , i did from a friends computer that is windows 8.1 pro 64 bit ,, but nothing everything DOESN'T work ,
all 32 bit editions boot and install just perfect (created by my computer ) so its not a computer problem ,, when i put the media on my computer (dvd/usb) and restart and boot on it ,, its shows me the windows logo ,, after 20 seconds (too much)
it shows the ring , and then it reboots the computer (2/10 tries it manages to go in the language selection screen ,, but when i click next ,, and then i click install now button ,, it reboots again) what is going wrong , and how can i fix it (where
should i make that bootable media ?) i have bought the windows from dreamspark ,, so i use a official iso and serial key

Hi,
This is not license problem, in my opinion, it's more relate with hardware and their driver problem.
Firstly, it would be better to contact the manufacture to identify if your computer support Windows 8.1 X64 edition.
Secondly, if your former system was not removed, try to access into the system and upgrade BIOS editon, after that, try to reinstall the system again for test.
Roger Lu
TechNet Community Support

I would like to take a iTunes play list and put it on a USB drive for my car radio to stay in my car. Is there a way to do this through iTunes so you have all the song info and there's no number in front of the name of the song? Is there a program?

I would like to take a iTunes play list and put it on a USB drive for my car radio to stay in my car. Is there a way to do this through iTunes so you have all the song info and there's no number in front of the name of the song? Is there a program?

iTunes only syncs to Apple devices.
Assuming the media is not DRM protected, any of the media can be dragged and dropped from iTunes onto other drives (external, flash, etc) as the user chooses.

I got a usb charger for my 4th gen Ipod touch that at first allowed my to charge and transfer music from my laptop to the Ipod now nothing happens when I plug the usb

I got a usb charger for my 4th gen Ipod touch that at first allowed my to charge and transfer music from my laptop to the Ipod now nothing happens when I plug the usb cord and Ipod into my laptop. Its mac so it is an apple system. I am wondering how I can fix this problem I am not very good with techy stuff so this is very confusing how it was working and it just stopped.

Hi johnsmiff99,
That is never fun when your iPod touch does not show up on your Mac. Take a look at the article below to walk you through on getting it to show back up on your iTunes. It is very easy to read so you wont feel overwhelmed with to much techy jargon. Let me know if you get this worked out.
If you don't see your connected device in iTunes for Mac
https://support.apple.com/en-us/HT203979
Take it easy,
-Norm G.

Is there a USB port for use of a flash drive?

Is there a USB port for the use of a flash drive on the new iPad?

The Camera Connect Kit USB port is mainly for importing Photos and Videos
http://i1224.photobucket.com/albums/ee374/Diavonex/e8058ab4.jpg
http://store.apple.com/us/product/MC531ZM/A/ipad-camera-connection-kit

Can I use a 10 ft USB extension for my HP printer?

Can I use a 10 ft USB extension for my HP printer?

USB 1.1/2.0 specifies a maximum cable length of 5 meters (~16 feet) - http://photo.stackexchange.com/questions/8679/whats-the-maximum-length-of-usb-ca ble-that-you-can-use-for-tethering

USB Reciever for CB8100

Similar Messages

Maybe you are looking for