Usb recovery Menu

I ve managed to do a recovery usb for my envy 3090 nr, but when i boot up from it i don t get the menu were u can chose if u want factory reset, delete recovery partition and so on...It goes straight to the installation were i am asked if i want to have my hard drives deleted.... i want to have the recovery on my flash in order not to have the recovery partitions and not to use the dvd s
Any ideas how to get the menu on my flash drive????I ve tried copping some files from the dvd s but at one point it askes me for the 2 nd dvd, and if i copy the folder from the recovery partition it says that the partition is missing.. It drives me crazy

This document will show you several options for running the HP System Recovery: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02638587

Similar Messages

USB Recovery problem

I received my USB Recovery device. I followed directions of turning off computer, inserting USB, Hit escape, then I get the startup Menu. When I hit F9 as instructed, I get a Blue Recovery screen that says
Your PC needs to be repaired
The boot configuration data is missing some required information
File:\BCD
Error code: 0xc0000034
I can not get past this point. Any help please!!

Hi McCarterRN.
Did you order a USB recovery stick from HP?
Are you testing the USB recovery device or is your PC unbootable?
If your PC is functioning correctly you can, for additional peace of mind, create DVD or USB recovery media by using HP's Recovery Manager. I cannot direct you to instructions on creating recovery media as I do not know your product number and factory installed operating system (OS). If you have upgraded your OS this will present additional obstacles.
Please provide the factory and current operating system you are using. Please provide your HP product number.
HP product number instructions can be found here.
Jaco
****I am not an HP employee****
Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
Errare humanum est.

USB recovery media from Toshiba for Windows 7 doesn´t work

Hi,
Recently as my laptop Potégé was slow I reinstalled Windows without using Toshiba recovery disks. Now I can't activate Windows 7 (64 bits), so I ordered a USB recovery media from Toshiba. I tried to use it but it doesn't work. I turn off the laptop, turn it on again pressing F12, -with the USB plugged to the laptop- and when I press HDD recovery, the system just takes me to Windows as usual, without reinstalling. Any thoughts on how to reinstall?
Solved!
Go to Solution.

Hi,
Are you getting a boot option menu when you press f12? Have you tried going into BIOS to check your boot order? Usually f2 or DEL will get you to BIOS, or at the bottom of the boot option menu (which I assume is f12). Once you are in BIOS, check that your USB drive is above the others in the boot order and save your configuration and reboot. If you are still having a problem, you might check to see how many USB devices you have plugged in, or chained, and remove the ones that are not necessary because they could interfere with booting to your USB drive. If you are using a USB hub, you might try putting the usb key into a different slot to give it priority over the other USB devices on boot up. The highest priority slot on a USB hub might be the one closest to the USB cable that plugs in to your laptop's USB port.

Windows 8 USB recovery fails with CTOERROR.flg error

Windows 8 recovery using HP supplied USB recovery device failed with CTOERROR.flg error.
[22:53:29.29] ChkErrBB.CMD : Detect some error during PININST_BBV.
[22:53:29.31] ChkErrBB.CMD : Check c:\system.sav\logs\BurnBootWarn.log
[22:53:29.31] ChkErrBB.CMD : or, check c:\system.sav\logs\BurnBootMerge.log
I have tried all the scenarios which are described in this forum but no success.
Can anyone suggest to which date should i reset the BIOS or anyother workarounds??
I have run diagnostic tests on Memory and Disks and both are fine.
* There is a big problem with the HP recovery manager which fails to recover windows. Many have reported in this forum and other forums....but HP has failed to attend this issue and fix the problem in their recovery manger or atleast show a workaround to restore the windows.
My laptop was drastically slow after the reinstall from the HP support.....and now when i decided to reset and recover the windows.....it fails. Unfortunately my laptop is out of warranty.
This is pushing me away from any HP and will never ever buy or recommend anyone to buy a HP product.
History about previous issue with this laptop:
Order # BDRN598901
Order # BDTP356101
* I had an issue with the HP recovery manager in creating recovery disc. I did contact the HP support as my warranty was still in place. They took my laptop and reinstalled the OS and sent it back to me.
Even after that i could not create a recovery disk and they send me a USB recovery device.
Service Order Product Service Event Order Status Estimated Delivery Date *MM/DD/YYYY Track this Shipment
BDTP356101 USB - WINDOWS 8 64B RECOVERY KIT SW FULFILLMENT POSTAL DELIVERY GROUND Shipped 05/05/2014 POSTAL SERVICE (STANDARD)
Service Order Product Service Event Order Status Estimated Delivery Date *MM/DD/YYYY Track this Shipment BDRN598901 HP ENVY 4-1115DX TouchSmart Ultrabook BOX PLUS PICKUP & REPAIR, 2 DAY SHIPPING Shipped 04/30/2014 FED-EX NEXT DAY (AFTERNOON)
Thanks,
KB29

Set the date in BIOS to 1/02/2012. Save & Exit. Boot with Recovery, let it run through the process- but on the first reboot initiated by recovery enter BIOS again to insure date is still set to 2012. If not change it again, then let recovery resume.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Can't Create USB Recovery Drive after Win 8.1 upgrade on Lenovo Twist

After upgrading to Win 8.1 and trying to create the usb recovery drive, I get this error:
"We can't create a reccovery drive on this PC. Some required files are missing.To trouble shoot problems when your PC starts,use your window installation disk or media"
Can some give me a hint as to how to solve this?Thx.
Solved!
Go to Solution.

I contacted Lenovo who sent me out a set of 4 Recovery disks. These disks fixed the problem but it meant wiping out the hard drive and reinstalling very thing from scratch. A new recovery partition is created and the discs reinstalled Win 8 which had to be updated. Then Win 8.1 could be installed. Everything is now working as it should.

HP Spectre 13-1310dx Win 8.1 USB Recovery issue

Hello!
I have been trying to recover my HP Spectre 13-1310dx ultrabook from its original USB Recovery Media 749738-003 (Win 8.1). However each time I am having a error massage which says
"Detect some error during PININST_BBV"
"Check C:\system.sav\logs\BurnBootWarn.log"
or "check c:\system.sav\logs\BurnBootMerge.log"
Anybody knows any solution for this issue?
Thanks

Hi @Servetb
Welcome to the HP Forums!
It is a great place to find answers and tips!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that when you tried to do the recovery from a USB key you received the error "Detect some error during PININST_BBV"
"Check C:\system.sav\logs\BurnBootWarn.log"
or "check c:\system.sav\logs\BurnBootMerge.log"
First I would test for any hardware failures just to rule out that possibiltiy'
Testing for Hardware Failures (Windows 8)
This step resolved this issue for someone else perhaps it will work for you also.
When you boot up your computer hit F10 that will take you to the BIOS manager. then hit F9 to set BIOS to factory default save and exit then do recovery.
Here are two more links that may be of assistance.
Recovering your computer from a USB flash drive
Troubleshooting HP System Recovery Problems (Windows 8)
You could also try changing the date in the bios to BIOS to 1/01/2012.
If the issue should still remain please contact HP support for assistance. It is possible the the recovery media has a problem.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

After USB recovery, restoration incomplete error - error during PININST_BBV.

I performed a USB recovery with USB made by Creating Recovery to wipe the hard drive.following error message when I click the Details button:
ctoerror.flg file
[ 1:06:44.60] ChkErrBB.CMD : Detect some error during PININST_BBV.
[ 1:06:44.60] ChkErrBB.CMD : Check c:\system.sav\logs\BurnBootWarn.log
[ 1:06:44.60] ChkErrBB.CMD : or, check c:\system.sav\logs\BurnBootMerge.log
[ 1:06:44.60] ----------------------------------------
[ 1:06:44.60] Critical error condition was detected at BBV1...
[ 1:06:44.60]
[ 1:06:44.60] Refer the following file if exists.
[ 1:06:44.60] - c:\system.sav\Logs\BurnBootWarn.log
[ 1:06:44.60] - c:\system.sav\Logs\BurnBoot.log
[ 1:06:44.60]
[ 1:06:44.60] Switch to 2ndCap's WinPE and show [Recovery Manager]'s Incomplete dialog.
[ 1:06:44.60] because RM's dialog can't appear on [Start] screen on Win8 environment.
[ 1:06:44.60] customer may not notice RM already shows Error dialog.
[ 1:06:44.60]
[ 1:06:44.60] ----------------------------------------
there might be unexpected reboot during BBV Clean or Last...
The process will cause CTO panic because the image might not be normal...
Laptop purchase on July 2013. System updated to 8.1. When recovered from USB to win8, errored. Tried to change BIOS time, didn't work

Hi @John90 ,
Here is a link that might help. The only other thing you could try is borrowing a copy of the exact same Windows 8 version as yours.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Apple TV stuck in Recovery Menu

My Apple TV had been working in an almost perfect fashion for almost six months with the exception that I could only stream content from my iTunes library and couldn;t sync content with the exception of photos. I proceeded to Restore to Factory Settings and since then I've been stuck in the Apple TV Recovery Menu.
I've searched the forum endlessly for other posts and I could only find one directing me to the following instructions:
http://support.apple.com/kb/HT1560
I performed all the steps in that link (detailed below) and I'm still stuck in the Apple TV Recovery Menu.
Has anyone run into the similar issues? Any ideas on how to fix this will be GREATLY appreciated.
1. Hold down the Menu and Menu down/scroll buttons on the remote for approximately 3 to 5 seconds, until the LED on Apple TV flashes yellow. (OK I DID THIS)
2. After Apple TV restarts, a screen appears asking you to pick a language. Select the language you wish to use. (OK I CHOOSE ENGLISH)
3. The Apple TV Recovery screen appears with 3 selections:
* Restart
* Run Diagnostics
* Factory Restore
If the Apple TV intro movie plays instead, repeat the first step. (OK THIS FAR)
4. Select Run Diagnostics. The screen displays "Running diagnostics" and a spinning disc cursor appears. (OK THIS FAR)
5. Upon successful completion of the diagnostics, the screen displays "Your Apple TV is working correctly." Select Done to return to the Apple TV Recovery screen and then select Restart to return your Apple TV to normal operation. (I GET A WORKING CORRECTLY MESSAGE AND THEN RETURN TO THE RECOVERY SCREEN AND SELECT RESTART BUT INSTEAD OF APPLE TV GOING INTO NORMAL OPERATION I GET THROWN BACK TO THE "CHOOSE LANGUAGE" SCREEN AND THEN "CHOOSE RESOLUTION" AND THEN BACK TO THE APPLE TV RECOVERY MENU
6. If the Apple TV Recovery screen reappears, unplug the power cable from your Apple TV and plug it back in. Your Apple TV should restart normally. (I TRIED THIS BUT I END UP IN THE SAME SPOT AS BEOFRE UNPLUGGING)

I too am having this problem. I've got a ton of stuff synched to it, including some rented videos, and dread having to reload it, but I eventually tried the restore option. It gave me an error and refused to to that.
For the past two weeks I've been having more and more problems with the unit. Each time I run the diagnostics it says there is nothing wrong.
I've made an appointment with an Apple genius tomorrow to try to get some answers.
Message was edited by: Jeff Barlow

T420S-- USB recovery doesn't work

Just create a USB recovery disk via ThinkVantage. It takes about 10GB( I used a 16GB USB disk). However, when I try to use it to boot the laptop, it shows " Error loading operation system". Unfortuanlly, I only can create this disk one time via ThinkVantage software. Now if my HDD is gone, I do not have any way to have it work again. Anybody have same issue? please help. Thank you. -- Viki
Solved!
Go to Solution.

It worked!! Spend almost half hour to explain the situation,finally they agree to send me one set for free! Thank you!!!! If you buy from them, $45+Tax+$3 shipping.

Stuck on recovery menu

It's been a while since I use my apple_tv and now i'm stuck in the recovery menu. It won't do a Factory setting and It's diagnose a device working perfectly, but won't restart. I found in discussion the same problem but no answer to resolve. Somebody knows something?

Try pulling ALL the cables for a moment and trying again.
Which Apple TV is it.

System won't boot to USB Recovery Media

I have a Satellite P55-A5312 with pre-installed Windows 8 (upgraded to 8.1), Intel i5 processor and 6GB Ram. I created a set of DVD recovery media and a USB Flash (Toshiba brand 32GB) recovery drive. I set the boot order in BIOS to USB, then DVD, then HDD. Secure Boot is enabled.
Question I have is, how can I verify that the reovery media will boot if needed? If I power on the laptop, neither the DVD nor USB will boot and it goes directly to Windows, which kind of makes sense. If I then restart, the DVD recovery media will in fact boot, but the USB recovery media won't boot. Even if I restart with F12 and choose USB as the boot device, the USB media will not boot. The only way I can get the USB recovery media to boot is if I disable Secure Boot.
I find it hard to believe that USB recovery media will only work if Secure Boot is disabled. What am I doing wrong?
Ken
Solved!
Go to Solution.

Sure would be nice to know what the recovery media boot behavior is suppose to be with Secure Boot enabled...
With a little luck, Peter will stop by and let us know.
-Jerry

My LG Optimus Zone is having software issues and I can't access the Recovery Menu for a Factory Reset

My LG Optimus Zone is having software issues and I can't access the Recovery Menu for a Factory Reset. It was working fine until I went to activate it and update the PRL. It turns on, but Freezes on the LG Logo. it currently goes into the LG Download Mode, and When I restore with LG's Mobile Support Tool, It finishes, reboots, and stays at the boot Logo. I was wondering if I can possibly get a replacement phone? This is a little upsetting, as i was hoping to have it transfered from prepaid to postpaid service next month

Who is your Internet Service Provider...?
Do you have any computer which is able to go online wirelessly...?
Have you forwarded any ports on the router...?
Try to adjust the wireless settings on the router and check...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
Under the Wireless tab,Change the SSIS(Network Name) to some unique name.Change the Channel Width to 20MHz only and Channel to 11,click on save settings.Under the Wireless Security subtab,Change the Security to WEP and type any ten digit number in key1 as the network security key,click on save settings..Under the Advanced Wireless Settings,Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
Also,for the gaming system,check this link.

How To Make Recovery Menu (F11) Functioning again??

Guys please help...
Currently I had created new partition and reinstall windows 7 on My HP Pavilion DV6-6001tx.
Since then, I found that recovery menu (enter F11) when booting is not functioning anymore..
How to make the recovery menu functioning again? is there anyway to do it???
For your info...the recovery partition still as it is....
This question was solved.
View Solution.

Depends on when you purchased it, recovery manager was not bundled until 2006 on HP notebooks.

HP Envy Laptop (Win8.1) Can't Create USB Recovery Drive

Hello fellow HP PC users;
I was wondering if anyone with a DVD drive equiped laptop had successfully created a USB Recovery Set?
I just spent the last 2 days trying to do this on my new laptop - to no avail (HP nag messaged me that it was important to copy the D:/ drive recovery partition to a USB or DVD discs) . I'm not big on CD/DVD backups as, in the past, I've experienced unwanted failures when previousl attempting a factory restore, so I wanted to use a USB drive for this backup. The HP utility for recovery disc creation only produced a gold spinning wheel/disc when a USB drive was inserted and this continued for hrs. Several tries with different USBs and ports produced similar non-results.
Today I spent an hour with Roger and Siva of HP Tech Support. I initially gave Roger a list of all of the things I had tried and I think we hit it off, as he was particularly excited about the stuff I knew, that he was unaware of. He promptly agreed that I had done everything possible to resolve the issue and he said he would send me a USB Recovery Set. This had to be authorized by his Supervisor Siva. After a half an hour on hold Siva came on the line to confirm my mailing info and said that he was authorizing the shipping of a set of recovery DVDs and that he would wave the normal $40 charge. When I asked why he wasn't sending me a USB copy, he said that because my laptop came with a DVD drive he was only authorized to mail DVDs. Exhausted, I capitulated and said "O.K. then .... go ahead and make my day and send me the DVDs!" Nontheless, I will go to bed crying for the next few nights because I wasn't able to make/get a USB copy.
If anyone has any other info on this problem I would be interested to here about it.
Thanks, stillgolfing
HP Envey17 Notebook PC
Windows 8.1 64 bit
Intel 17 - 4700MQ CPU @ 2.4 Ghz
8gb Ram, 1 Tb Hard drive
Vid1 = Intel HD Graphic 4600
Vid2 = Nvidia GeForce GT740M

You are allowed to "make" only one set. You haven't made one yet.
I just created my Recovery USB for Envy 15t- j100 using>> PNY Turbo 3.0 - so it is not limited to 2.0 flash drives.
I first tried with a Sandisk Extreme 3.0 which produced the same thing that you experienced... no matter what I tried. (I actually was just testing it since many had reported not being able to use that model)
I did discover that even with the PNY it would only work if I waited to insert it when Recovery Manager was at the screen where you choose usb or cd/dvd.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

How to create a USB recovery flash drive using recovery ISO image?

This “HowTo” provides information and instruction how to create a USB recovery media flash drive using the Toshiba recovery ISO image files or Toshiba Recovery discs (DVDs)
To create a USB recovery media flash drive, a USB flash drive with at least 16GB disk space is suggested (depends on the size of the ISO images or recovery discs).
Note: Since 2015 the ISO layout has changed and a different procedure must be processed to create the USB media. The new recovery media type can be identified by the names of the ISO files.
More info: http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm

Yes, that article should apply to tablets.
But if your USB recovery drive does not get recognized then it must be corrupted - you should be able to format your disk and perhaps try to see if creating a Recovery device on other devices will make it recognizable on your tablet 2.

Usb recovery Menu

Similar Messages

Maybe you are looking for