USB-Redirection dosen´t work

Hey,
I have a problem with USB Redirection. It configured it by Administrator's Guide for Release 3.3.2 but it still dosen´t work.
My steps:
- add USB controller to VM (Windows XP)
- Enable USB in Sun Ray RDP Settings
- install SunRay connector (Icon in Taskbar Sun Ray USB Redirector 2.4)
- Check Device manager (UtSrDtuBus and UtSrServerBus installed)
System: 2x VM Oracle 5.6 + Oracle VDI 3.3.2 (vmWare)
Are there other important Steps?
ps. Sorry for my bad Englisch
kind regards

Hi,
Did you install the "Guest Additions" under your Win XP VM, if not try to install then reboot and see if you can access the USB , hope this might be helpful for you to a certain extent.
Regards
Edited by: user9130164 on Sep 25, 2012 11:28 PM

Similar Messages

VDI 3.1 USB redirection doesn't work

Guys,
Having problems with USB Redirection on Windows XP image. I have installed SRWC Components on to the template - I can see utsrSession device, usb redirector icon comes up under system tray too. However, USB sticks doesn't work - checked uttsc logs on solaris box which reported as follows:
2009.12.01 16:48:39.388565 EST db_get_device[term=IEEE802.00144fd6e070]: No devid key
2009.12.01 16:48:39.388612 EST detach_event[term=IEEE802.00144fd6e070]: Device not found.
2009.12.01 16:48:39.388649 EST db_get_device[term=IEEE802.00144fd6e070]: No devid key
2009.12.01 16:48:39.388678 EST detach_event[term=IEEE802.00144fd6e070]: Device not found.
2009.12.01 16:48:39.388705 EST db_get_device[term=IEEE802.00144fd6e070]: No devid key
2009.12.01 16:48:39.388720 EST detach_event[term=IEEE802.00144fd6e070]: Device not found.
2009.12.01 16:48:39.388741 EST db_get_device[term=IEEE802.00144fd6e070]: No devid key
2009.12.01 16:48:39.388757 EST detach_event[term=IEEE802.00144fd6e070]: Device not found.
2009.12.01 16:48:39.388804 EST fill_devinfo: term key not found
2009.12.01 16:49:03.559301 EST ut_usb_start: Starting usb: with debug_level: 1
2009.12.01 16:49:03.560447 EST device_event[term=IEEE802.00144fd6e070]: Ignoring device from unsupported RDD. Version string is: null
2009.12.01 16:49:03.560726 EST db_get_device[term=IEEE802.00144fd6e070]: No devid key
2009.12.01 16:49:03.560747 EST unit_event[term=IEEE802.00144fd6e070]: Device not found.
2009.12.01 16:49:03.560798 EST device_event[term=IEEE802.00144fd6e070]: Ignoring device from unsupported RDD. Version string is: null
Got customer to uninstall the SRWC components package and asked him to install just the USB Redirector (the one from the VDI 3.1 EA release).
uttsc logs now reporting that disks are OK.
bash-3.00# tail -f /var/opt/SUNWut/log/utstoraged.log
2009.11.30 16:46:03.610295 EST service END lun=0, ctlmin=1, uid=150000, xid=2
2009.11.30 16:46:14.549090 EST servicing /tmp/SUNWut/units/IEEE802.00144fd6e070/devices/usb@1/hub@1/USBest_TechnologyUSB_Mass_Storage_Device, lun=0, ctlmin=1, uid=150000, xid=2
2009.11.30 16:49:59.835905 EST service END lun=0, ctlmin=1, uid=150000, xid=2
2009.11.30 16:50:08.666330 EST servicing /tmp/SUNWut/units/IEEE802.00144fd6e070/devices/usb@1/hub@1/USBest_TechnologyUSB_Mass_Storage_Device, lun=0, ctlmin=1, uid=150000, xid=2
2009.11.30 16:52:08.312175 EST service END lun=0, ctlmin=1, uid=150000, xid=2
2009.12.01 16:49:28.440061 EST servicing /tmp/SUNWut/units/IEEE802.00144fd6e070/devices/usb@1/V68_____USB_2.0_________, lun=0, ctlmin=1, uid=150002, xid=3
2009.12.01 16:50:35.108629 EST service END lun=0, ctlmin=1, uid=150002, xid=3
Looks like this time it is seeing the disk correctly..still no USB device shown under My Computer !! Any thoughts??
Regards,
Hardik

Forgot to update the Forum.
Latest firmware did resolve the issue !!
Thanks & Regards.

Solved Zen Touch unresponsive buttons problem, USB still dosen't work tho

2 months after my Zen Touch was dropped and the buttons became unresponsi've, I finally figured out the solution and it works beautifully now.
Unfortunately the USB still doesn't work and I was wondering if anyone might know whats causing that?
My guess is damage to the board itself, which in that case I won't be able to fix it ;_;
Any suggestions would be appreciated.

Couldn't figure out how to text in that last reply...sorry
Seems to be a common problem with these. How did you get the buttons to respond? Do you know of a place that does repairs?

Wireless and USB keyboard dosen´t work during boot

After rebooting my Imac the keyboard dosen´t respond in the boot phase. I get this famous blinking question mark at booting so I have to press C or D on the keyboard for options. The problem is that neither the wireless keyboard or my new USB keyboard work. I have also installed the firmware password utility, but it dosen´t get that far to ask for password, just this blinking question mark at startup. Does someone have an idea how to make the computer respond to the keyboard commands????

Apple doc for you:
Apple Wireless Keyboard and Mouse: About the Bluetooth Firmware Update
* Last Modified on: December 09, 2003
* Article: 86493
The Apple Wireless Keyboard and Mouse software CD include a firmware updater. You can use it to update the firmware of your computer's built-in Bluetooth hardware or a D-Link DBT-120 (rev B2 or later) USB to Bluetooth adapter.
About the Bluetooth Firmware Update
For optimal performance of the Apple Wireless Keyboard and Mouse, you should install the Bluetooth Firmware Update. The firmware update can improve the performance of the mouse and keyboard by decreasing connection and tracking issues.
Installing the firmware update lets you use keys on the Apple Wireless Keyboard during the startup process. This is important if you need to start up the computer from a CD, in target disk mode, or reset parameter RAM (PRAM), for example.
It also lets you wake the computer from sleep by clicking the Apple Wireless Mouse or pressing a key on the Apple Wireless Keyboard.
The firmware updater is available on the Apple Wireless Keyboard and Mouse software CD. It is designed to update the built-in Bluetooth hardware of some Macintosh computers. To find out which computers have this hardware, see technical document 86207, "Bluetooth: Macintosh Computers With Built-In Bluetooth". You can also use it to update the D-Link DBT-120 USB Bluetooth adapter (rev B2 or later).
If you don't have an Apple Wireless Mouse or Apple Wireless Keyboard, you don't need to install this update.
Important: This updater does not add these features to other Bluetooth devices, including earlier revisions of the D-Link adapter and other USB Bluetooth adapters.
Installing the Bluetooth Firmware Update
1. Install the keyboard and mouse software, which includes Apple Bluetooth 1.3 software. It's available on the Apple Wireless Keyboard and Mouse software CD. Double-click the file named KeyboardAndMouse.pkg.
2. If you have a D-Link DBT-120 USB Bluetooth adapter (rev B2 or later), make sure it is plugged into one of the computer's USB ports and not a port on a keyboard, display, or hub.
3. Open the firmware updater from the install disc. Follow the instructions that appear on the screen.
Important: Information about products not manufactured by Apple is provided for information purposes only, and does not constitute Apple's recommendation or endorsement. Please contact the vendor for additional information.
Document 17159, "Locating Vendor Information" can help you search for a particular vendor's address and phone number.

High quality mic on external usb-soundcard dosen't work with Adobe Connect. Why?

Hello
A friend of mine bought a quite good microphone and a good extrernal soundcard for recording podcasts. Everything works fine. But know she wants to use the microphone for Adobe Connect, because of the very good sound quality. Adobe Connect finds it an you can select it, but now singal comes into Adobe Connect. But it works with every other Adobe application. So why doesn't it work with Adobe Connect?
The soundcard is the Tascam US-122 Mk2. Normaly very uncomplicated ..
Thanks for any advice!
Alinja

I connect my bus-powered HDs (more than one) to the iMac all the time without any problems. I have found, though, that for me the FireWire enclosures work much better (faster and more stable) than the USB2 ones. I have had the USB2 drives freeze my computer once or twice when I connected the HD, but nothing like that has ever happened with the FireWire connections. (I switched the same disk from USB to a FireWire enclosure, so all other elements were kept constant in my experiments.)
One of my HD is in a MacAlly 2.5" enclosure that offers both FireWire and USB2. The other one is in some generic enclosure with only USB2. Both are bus-powered and both work fine.

Remote Desktop Session Host USB Redirection with Windows 8.1

Hello all,
I've currently setup this environment (both OS/Client are fully up to date as of today). I am using one server as the Gateway, Web Access, Connection Broker and RD Session Host with one collection.
I am trying to get USB redirection setup to work properly. Some devices work (pen drives/iPhone etc), but other devices (we have a smart card reader we are testing that works natively on my Windows 8 machine) that doesn't appear.
I see conflicting information wherever I go on the internet on how to get this working. Some places suggest modifying the registry on the client machine, other places suggest you need to add a customrdpproperty to the collection.
What is the proper way to get this working on 2012 R2 with Windows 8.1?

Hi Gavin,
Thank you for posting in Windows Server Forum.
For redirecting USB on server 2012 R2 is to set the custom property for a session collection by using following command.
Set-RDVirtualDesktopCollectionConfiguration –CollectionName YourCollectionName –CustomRdpProperty "usbdevicestoredirect:s:{6bdd1fc6-810f-11d0-bec7-08002be2092f }"
where {6bdd1fc6-810f-11d0-bec7-08002be2092f} is the System-Defined Device Setup Class GUID.
More information.
RemoteFX USB Redirection in Windows Server 2012 and Windows 8
Apart from above also refer below links for information.
1. Smart Card and Remote Desktop Services
2. Why can't I see my local smartcard readers when I connect via RDP?
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

USB Redirection Performance

I have SRSS 4.2 w/ SRWC 2.2 (AKA SRSS5) connecting to an XP virtual machine using the drivers included with the SRWC package. The DTU is a Sunray 2 with the firmware provided via the SRSS 4.2 install. The DTU connects to the VM via a vmware view broker.
I have USB redirection up and working just fine with one exception: Performance is horrid. It takes 15+ minutes to copy a 300M file from a USB key to the VM. This works out to about 350KB/s or 4% of the 100Mbps bandwidth
When using our Wyse thin clients, that same file from the same usb key to the same VM will copy the file at a more reasonable 9MB/s. so that same file gets copied over in a little over 30 seconds.
Is there something we should be doing (i.e., hacking apart the vmware broker agent to not install its usb redirectors) in order to get better performance or is this as good as it gets with the sunray?
--john

V10L's for the wyse devices which have USB 2.0 ports on them.
But thanks for the reminder that the SR 2 only has USB 1.1 ports. That may be the issue (in which case the unit is running at 50% of the theoretical performance. )
I have some 2FS's laying around which in theory have USB 2.0 ports on them and will retest on those.

The internal sound dosen't work

I have a MacBook Pro 17inch unibody 2011
Every thing was just fine until I restarted my mac then when it started up again the sound icon went gray and I can't controlle it any more I also notice that my trash is empty although I had some stuff inside it and my usb slots dosen't work also
I had tied every thing to turn the audio back on but I failed
I am sure that there is nothing wrong with the hardware because I still can hear the music at start up so I think it's something with the software system
Please I need your help

Look at these links to see if they will assist you:http://http://support.apple.com/kb/HT1379
http://http://support.apple.com/kb/HT1379
http://http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh26871.html
http://http://support.apple.com/kb/HT1895
Ciao.

SGD is disabling USB redirection on VM's VDI3.1

Hello,
we have the following issue at a customer.
USB Redirection is working like it is supposed to be... As long as the User didn't connect to the VM over SGD. After the SGD login, the VM finds a new unknown USB device and doesn't install the drivers. After you login at a SunRay again, USB redirection will not work, until you manually delete the two unknown USB devices...

Well here's what you need to do if you run into the same problem.
Having spent some hours investigating this it appears that the SunRay DTU needs to be able to make a connection to the SunRay Server on a TCP high port - 1024:65535 for USB redirection to work
Where the DTU is on the same physical segement as the SRS this is usually not an issue but where a firewall may be present between remote segments it is very likely that this will be a problem.
Of course if people setup firewalls to pass all traffic on all ports between the DTU and the SRS they will never see the problem. If you define your rules more specifically, as we do, then you might hit the problem we had.
It's time for a more comprehensive description of the communication between various components of a Sun VDI system to appear on the SunVDI WIKI - preferably from someone who can write authoritatively on the subject.

Windows 7 (Ent) Sp1 on server 2012 R2 HyperV, RFX USB redirection not working

Hello,
I currently have windows server 2012 R2 with HyperV installed. I have built two virtual machines. A windows 8.1 and Windows 7 sp1. Both are enterprise editions
For RemoteFX the hypervisor is using a Zotec GTX 760 GPU. It recognizes it and uses it to apply remoteFX adapter on my Windows 7 Sp1 VM.
As you are aware I do not need to use a GPU to enable RFX on my Windows 8.1 it can do this without the need of a GPU.
Using an RDP client( v8.1) I can connect to my Windows 8.1 VM with a USB headset,memory Key or a printer and they all enumerate on the Virtual machine. The driver for each device installs
and I can use the device without any issues.
However this issue lies with the Windows 7 SP1 VM. I can connect to it via RDP( Same client) but I cannot redirect any devices to it. I have installed the latest integration services available on the VM. I have ran all updates available.
Because I have ran all updates the rdp version on the VM is running v8.1.
Previous to installing the updates USBr still was not working
I have enabled the following group polices under remote desktop services on the Windows 7 SP1 VM :
RDP 8.0 -- Enabled
Configure RFX -- Enabled
Is there a known issue with USB redirection not working on a Windows 7sp1 virtual machine hosted on server 2012 Hypervisor ??
Many Thanks
Brian

Hi,
According to the log above, I found that we run the script on both Server6 and Server7. Errors as below:
Server6: Conversion is not supported in restricted language mode or a Data section.
Server7: Couldn't figure out valid servers from the specified destination scope. Check your parameters and try again.
Since we can only run the RollAlternateserviceAccountPassword.ps1 Script on CAS server, the script not works well if Server6 is MBX server.
For Server7, based on the error message, it seems you still have no right to run the script/cmdlet.
Please add your account to Organization Management Role group(ADUC->domain.com->Microsoft Exchange Security Groups) to test if possible.
By the way, from Technet:
You need to be assigned permissions before you can perform this procedure. To see what permissions you need, see the "Client Access Security" entry in the Client Access Permissions topic.
Client Access Permissions
http://technet.microsoft.com/en-us/library/dd638131.aspx
Feel free to contact me if there is any problem.
Thanks
Mavis
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

Server 2012 - Windows 8 RemoteFX USB Redirection not working

I have setup a test envrionment with Server 2012. RDS has been installed. Hyper-V, RDCB, RDWeb, and RDVH are all on the same box. I have a personal unmanaged Remote Desktop Virtual pool with one test virtual running Windows 8. I have
enabled RemoteFx USBdirection in Group Policy on every machine involved and forced GP update.
I can see my devices in the Remote Desktop Connection details on the client (i.e. it shows up under Local Resources/Local devices and resources/More/Other supported RemoteFX USB devices. Or, if you prefer, I have added "usbdevicestoredirect:s:*"
to the .rdp file that the Web Access spits out then I log in to web page and attempt to connect to my published virtual machine.
The problem is that the devices do not show up anywhere in the virtual machine's device manager once logged in. Furthermore, there is no Universal Serial Bus node in device manager at all. I do not have a RemoteFX compatible GPU available for
hyper-v or the virtual machine, but it is my understanding with Server 2012 and Windows 8 this is not necessary.
Does anyone have any ideas? I thought I saw a [email protected] or similar email on one of the blog comments, but I can seem to find the post again, I have scoured the internet relating to usb redirection and remotefx and it is a disorganized mess.
Thanks.
Wayne

The first device I am focusing on is a desktop scanner, an Epson GT-S50. This device shows up in the client's Remote Desktop Connection details as a "RemoteFx Other supported RemoteFX USB Devices".
Although, and perhaps I'm a total fool, but, I have not installed Epson's specific drivers for this scanner on either the client, nor the VM. My client's Device Manager currently shows the scanner under "Other Devices" as "Epson Scanner". The
Device Status says that "The drivers for this device are not installed". My expectation was that this was still enough to redirect the same object (and its condition) to the VM. At that point, I expected the VM to see and respond
(in its own Device Manager) the same way, at which point I would then install the Epson-specific driver package on the VM (i.e. without ever having to install the Epson package on the client).
The second device I wanted to test was a Ezurio BRBLU03 Bluetooth Adpater. This device's drivers have been installed on the client and works flawlessly, locally. However, this device is not showing up at all under "RemoteFx Other supported
RemoteFX USB Devices", even after "usbdevicestoredirect:s:*" was specified. I suppose this is a separate issue, and I was planning on troubleshooting this next. For now I just wanted to see a proof of concept that a device that RD can see can in
fact be redirected.
I guess I have based my expectations on the experience we had with a third-party USB redirection tool that we tested prior to engaging in testing RDS.
My client is running Windows 8 Enterprise, and the VM (vhdx) is running the same. When you refer to the RDC 8 update, isn't that already included in this OS? In other words, is that only a concern if I were using Windows 7?
Thanks for your help.

USB Redirection in un-brokered SR VDI not working

I have installed Sun Ray Server 4.2 and SRWC 2.2 on a Solaris 10 5/09 server.
I am using my own kiosk script to connect to a Windows XP SP3 virtual machine. I have installed the srs-winstaller.exe on the XP VM with no issues.
I am having trouble getting USB redirection to do anything. In Windows, the "Sun Ray USB Redirector 1.1" icon is in the System Tray. Device Manager shows utSrSession with no errors. The Windows Event Viewer is showing Application errors for utUsbRedirector (newest first):
Warning: utUsbRedirector::WndProc (WM_WTSSESSION_CHANGE WTS_REMOTE_CONNECT g_start_threads failed)
Error: Usb_manager::g_stop_threads() - Handle 0 was not registered:0x2
Warning: Usb_manager:~Usb_manager() - g_port_driver_handle CloseHandle() failed
Warning: Usb_manager::g_stop_threads() - WaitForMultipleObjects Failed
Warning: Usb_manager::g_start_threads - process_return - packet_negotiate failed
Error: ServerChannel::flush (WriteFile failed - error:1
I turned up the uttscpd logging
utku7 4767 14177 0 10:20:34 ? 0:00 /opt/SUNWuttsc/lib/uttscpd -D 20
but the log files in /var/opt/SUNWut/log/uttscpd* are always empty.
Am I correct that mounted USB device should show up in:
/tmp/SUNWut/units/IEEE802.00144f3baa6b/devices/usb@1/hub@1
I have tried plugging in a scanner, a DVD burner, and an iPhone. Nothing ever shows up in that directory and Windows never shows any indication that something has been attached. The only thing I can get to show up in that directory is my USB flash drive, which uttsc maps in the old way using RDP device redirection. At least that means to me that the USB port works on the Sun Ray 2. It looks like I've missed something, can anyone direct me? Thanks.

Yup, that's exactly the kind of "I've missed something" I was looking for. Didn't know about that parameter. Thanks patrickb!
So I removed the -r disk parameter and added -r usb instead. That's what I needed, devices are now recognized by Windows.
Can you use -r usb and -r disk together or is that a bad thing when you insert a flash drive? Which would take priority?
My experience with just "-r usb:on" has been poor:
My genuine "Sun Partner Advantage" flash drive and my U3 Cruzer Micro flash drive both load drivers but don't show up in Explorer. When I try to open My Computer it hangs until I remove the flash drive.
A DVD burner worked (as a reader) for a couple minutes but then froze up.
My Windows Mobile 2003 SE handheld loads drivers but is not recognized by ActiveSync.
My iPhone failed as expected with a driver problem in Device Manager.
But...my NeatReceipts Scanalizer did work! It's a little 600 dpi color document feed scanner. I was able to do a full page color scan which was very nice.
I found that nothing worked at all the first time it was plugged in. It would be discovered by XP and drivers would be found but the device wouldn't show up at all. If I removed it and then re-attached it, I had much better results in terms of drivers loading. Of course most things still didn't work, but they came close.
Another positive was that no matter how locked up Explorer got, removing the device was always clean and I got full control of Explorer back.

Fujitsu fi-6130z scanner doesnt work on Windows server 2012 using Remote Fx USB Redirection

I'm using Wyse WES7 SP1 client and using RDP, i'm connecting to RD Host Server 2012 standard edition with Remote FX enabled. scanner is able to redirect using Remote Fx and i've installed appropriate scanner driver on server. the scanner is listed in Device
and Printer option of Control Panel.
I'm using MSPaint application to scan my document, but when i click on From Scanner or camera, it dispalys
"Unable to Retrieve picture from device.Verify the device is properly connected and try again" warning message. i couldnt able to scan the document.
But with Wyse TCX USB redirection it works fine.
Is there any server side configuration for the scanner to redirect and work properly ? am i missing something ?
Kindly helpp me to troubleshoot this problem
Raveendra Pai

Did you ever get this working? I am having similar issues trying to redirect a 6130z thru RDP to a 2012 R2 server.

Using solaris 11 x86 I do not get usb audio in firefox or additions where can I redirect the internal audio to usb audio? Audio works through solaris

I upgraded to Solaris 11 x86 and Firefox 3.6.10. I have sound through Solaris but not through Firefox or any of the add-ons.
I am using USB speakers which work with Solaris Rythmbox. How can I redirect Firefox audio to my USB speakers?

It works fine, thank you. There is one glitch when I turn off my system and on the next day the audio is missing again. Applying the dsp to dsp 0 reboot and then back to dsp1 reboot I get the audio back.
Is there any way to restart the process?

Mac Remote desktop redirection doesn't work on 8.0.5

After the Microsoft Remote Desktop for MAC update on March 19th (8.0.5) folder redirection does not work properly. It worked fine on the 17th before the update. Please advise as some of my clients do use macs..
Updated: I need to specify that not working means. The drive redirects, but no folders show up at all. If i try to create a folder on the redirected drive we get an error 0X8000FFFF: CATASTROPHIC FAILURE. I have tried multiple usb drives, SD cards and more.
Even NTFS formatted usb drives will not work.
http://WrinkleFreeIT.com/

Hi,
Firstly, would you please provide us the log file after you reproduce the issue to see if we can find some clues.
In addition, please try to uninstall and reinstall the app.
Thanks.
Jeremy Wu
TechNet Community Support

USB-Redirection dosen´t work

Similar Messages

Maybe you are looking for