USB Rom drivers

Hi!
I have a problem...
Where I get drivers for USB Rom?
Phone: 5130 xpress music
SO: Win XP
Tkz a lot!

Hi!
I have a problem...
Where I get drivers for USB Rom?
Phone: 5130 xpress music
SO: Win XP
Tkz a lot!
Just make sure you have the latest version of Ovi Suite or Nokia Software Updater (NSU) installed on your PC and you should be OK. PC Suite is no longer developed and has been replaced by Ovi Suite or the standalone NSU.
I think you may be thinking about an error that appears during a firmware update. I have also had a pop up saying Windows was unable to install Nokia USB ROM driver but it has never caused me any issues so I am not worrying about it.
Nokia N8 on O2-UK
Firmware 022.014

Similar Messages

How can i install snow leopard on my mac G5 using a command line and booting from an external usb rom, since my disk i have is not a bootable media

How can i install snow leopard on my mac G5 using a command line and booting from an external usb rom, since my disk i have is not a bootable media

Hi.
You simply can't. Snow Leopard is compiled in Intel binary only.
Good Luck.

Problems with cd rom drivers on win 98

Ok I have a MSI 6524 mb and a sony cdrw drive, an LG cr rom and 1st gen dvd that dont like to read cdr's. I have formated my hd and put win 98 se on it, but it will not load the cd rom drivers , and because of that, the IDE drivers wont install cause they come on later from win 98. I've check all manufactures web sites and non offer a cd rom driver cause they are all plug and play.
Now I have a windows ME boot disk that does have the cd rom drivers but I keep getting an error message about disk cache utilitly being on my hard drive when I use the ME boot disk Is there a way to use the ME and not have errors? I know there is a way to load cdrom drivers in DOS, but im Super stuid with DOS and even with instructions from the net I cant get it right. Can somone please offer me some very GOOD instructions on what to do.

Well I tried that, but only the Windows Me boot disk seems to have drivers for my cd rom. I even tried to use a patch that adds 4 more cd rom drives to my win 98 boot disk, but I couldnt understand how to do that. I think it was a bad patch.
The main reason I'm redoing my Hd is because everytime I try to use any thing , any program, run anything, it will work for a few seconds and then freeze to a blue screen that says "windows has had a fatal error, press any key to continue or press control alt del to restart" So I push any key and explorer has performed an illegal opperation, so I click on close, and then another program does the same thing , and then another, til there is nothing left running, or the comp is completely frozen. And then everysingle time I reboot , the same thing happens.

Just installed iTunes 10.6.3 and now the computer doesn't recognize the CD-ROM drivers

I've had iTunes previously on Windows 7, but because I had it on my computer, the computer would not recognize my CD-ROM drivers, so I uninstalled it. I just downloaded iTunes again, and the same problem is happening again. Is there any way I can keep iTunes and get my drivers working?

Article: TS2308

Delicacy of USB-VXI drivers

I've been having problems with the USB-VXI drivers. The cause can be different, but the symptom is always the same.
Symptom: The computer hangs inside a VXIMove. There is no way on the computer end to recover once you are there (killing LabView takes a while, with a "Resetting vi" message, and then the computer won't even reboot without a hard reset). I did find that cycling power on the VXI chassis does get out of the lockup situation. But in any case, it's not a stable environment.
I have seen this happen at times on a straight USB connection, but the big problem system is admittedly more complex. It uses USB-to-fiber transceivers so that the VXI chassis can be 50 meters away from the control computer (tried the fiber-VXI connection and had a multitude of problems; inconvenient power-on sequence restrictions, problems passing fiber through bulkheads, etc.). Anyway, in this form, it may work fine for a while, but seems to hang when the rate of VXI traffic increases. This is an application that has run for years using MXI-2 connections.
On another (straight-thru) system, I've seen the identical problem simply when another near-by device was powered on during times of heavy VXI access (power was properly conditioned; this problem is more rare but still happens).
Of course, these systems are using the only form of NIVXI drivers that supports USB (3.5).
So my questions are: any thoughts? Will an updated version of NIVXI in the near future likely resolve the problem?
Note: on the key problem system, we originally used USB-1.0 to fiber transceivers. These gave no problems, but VXI operations took way too long...
Never had any problems with MXI-2, but it's not suitable for this one version of our system...

Hi jraber:
I'd like to get a little more information from you if possible.
1) Can you give me some information about your host controller? What kind of computer is it? What chipset? Are you using the motherboard USB or a USB port from a plug in card?
2) How often does this problem occur? Can you post an NI-Spy capture of when the problem occurs?
3) Finally, when the problem does occur you say you can power off the chassis to get it working again, have you tried just unplugging then replugging the USB cable?
Regards,
Emilie S.

No Usb 2 Drivers In Sp1

According to MSI info about USB 2 drivers should be included in SP1 and are not available for separate download for Win XP.
I got SP1 but no USB 2 drivers could be found i still have the old ones from Microsoft.
I can imagine that many users did not check if they really got USB 2 drivers.
Appreciate any help.

Microsoft added the USB 2 support in Service Pack 4 for Win2k and Service Pack 1 for WinXP
the thing is thet after installing the Service Pack don`t expect Windows to detect the USB 2 ports by itself ... you`ll have to delete them from the Device Manager then run Add/Remove Hardware to force it to detect them.

USB Cable drivers expired certificates

Trying to create an msi for a silent unattend install of Vivado 15.2 on Win 7x64 and I'm having a problem installing the USB cable drivers in that after installing a "Progam compatibility Assistant" window appears that states "Windows requires a digitally signed driver". Having checked the certificates installed I can see that both certificates from Jungo and Xilinx expired on 2011 and 2008 respectively. How do I go about resolving this?

Hi
I suggest you to try the steps mentioned in the section "Batch Mode Installation Flow" to install Vivado 2015.2 from the following user guide: http://www.xilinx.com/support/documentation/sw_manuals/xilinx2015_2/ug973-vivado-release-notes-install-license.pdf
Thanks,
Vinay

USB controller drivers ??

Where are the latest drivers for USB controller on the MSI website ? I looked and all i see is the via 4in1 hyperion .I dont want those cause i already have those Plus updating those drivers may cause problems for my radeon 9800 pro . I was able to use the MSI mobo cd utilities cd to get those usb controller drivers but im sure there are updated ones . I just cant seem to find them listed .

Quote
Originally posted by cujo
restricting kids rights with limited access accounts in xp no good?
hehe. thankfully no kids for me yet.
Yes i have user accounts setup for them but .They will find a way to get on it and ill find a way to not lock myself out when i leave my desk for 5 minutes :D :D
Then i come back :O :O :O ;( ;(
8) :D

Nokia 5320 usb rom problem ???

I need help please. i have a nokia 5320 and i can't use the PC suite beacause after installing the software the nokia usb rom driver can't be found and the pc suite application can't recognize the phone. I've tried 6.86 and 7.0.7 version of PC Suite and both don't work. What is the problem? anyone can help me please?

What MS OS & version are you using XP or Vista? Are you using the correct usb cable for 5320?
Message Edited by android on 09-Aug-2008 01:45 PM
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

USB control drivers

Hey everyone ,
i have a HP Pavilion 20-b101ea All-in-One Desktop PC... so after i installed windows 7 32 bit os , i couldnt find any USB control drivers for this machine..i got rest of them...thats mean other drivers... ive only got a problem with this 2 drivers...
can someone hepl me to sort out this matters...plzzz
This question was solved.
View Solution.

Hi:
Install the amd chipset driver first and reboot. You want the first file listed on the webpage.
That should install the smbus and usb 3 controller drivers.
http://support.amd.com/en-us/download/chipset?os=Windows 7 - 32
If it does not install the usb 3.0 controller drivers then download and install both of these drivers and you should be good to go.
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&sp...
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&sp...

K8N Neo USB Controller Drivers

System is
AMD Athlon 64 3400+
1GB Ram
MS-7030 K8N Neo Mobo
ATI Radeon 9800 Pro
Creative Audigy 2 ZS
Western Digital 160GB Serial ATA
Athena Power ATX-450W PSU
Well, I recently did a fresh install of XP Pro, which went smoothly. I was OCing and went a little to far and my system wouldnt boot. After a bunch more problems and flashing my BIOS, I got everything working again. Now the only problem that I have left is my USB controller drivers won't install.
I had all my drivers backed up using Driver Genius and I currently have 18 drivers loaded. When I go to restore it has my High Speed USB Bridge, USB mouse, and keyboard (the 3 drivers Im currently missing) backed up but when I restore they don't do anything.
I installed Nvidia's 5.10 system drivers which I thought had the USB drivers on them and USB is enabled in BIOS, so, I dont know what to do.
Oh and in Device Manager, under USB controllers it has PCI to USB Host Controller, 2 standard OpenHCD USB Host Controllers, and 3 USB Root Hubs; but none of my 5 USB ports will work so whats the deal. Thanks in advance, Stealth

An sp2 bug workaround is to right click the "Standard Enhanced Usb Controller" (usb 2.0) and choose update driver and let it be done automaticly.
xp will then make a new copy of the neccesary files (if needed) from driver cache and dll cache .
Do the same for the two "openHCD controller" 's (usb 1.1) also if needed.

Portege 3480CT CD Rom Drivers

I have a Portege 3480 that I want to boot in Dos with CD Rom support in oder to load a new Operating system. I have downloaded the companion diskette but the toscdrom driver does not load and therefore MSCDEX fails. The CD drive is 24xspeed attached via a PCMCIA card. The CD drive is Toshiba Part No 2793020 with Tosihiba PCMCIA card. Is there another driver that I should be using?

Quad
Thanks for you help. After many hours, I have finally managed to gain access to my Toshiba CD Rom drive which is attached via a Toshiba PCMCIA card.
I have done this with a mixture of the companion diskette from the toshiba website (which was no good on it's own!) and with a file from the freecom.com website.
It appears that when a machine is booted in Dos it is unable to see through PCMCIA cards to fully access external drives without a specific program (point enabler). Although the bios does allow you to boot from a CD Drive you can't load drivers and mscdex which give full access to the content of the CD
I found out with some Card Sevices software from tssc.de that the Toshiba PCMCIA CDRom card was is infact a Freecom card so I downloaded (00001005.zip) a Cable I & II PCMCIA Dos Driver of this website.
In the download is a file called fcpoint.exe, which I had to load in config.sys before I loaded the device driver toscdrom.sys (which was on the companion diskette).
For some reason toscdrom.sys could only find the cd drive when the machine was booted from the hard disk and not from the floppy (don't quite understand this, unless it's the fact that the floppy is attached by a usb connection on port replicator).
Also mscdex is needed in the autoexec.bat.
Hopefully I should now be able to continue with windows 98 setup from the CD Drive.

I Need USB Controller Drivers For My HP Pavillion g6 2235ca Notebook Running Windows 7 Pro 64bit?

So it has been at least a couple of months that I've been using my laptop with only ONE working USB port.
The other two do NOT work. If I go to Computer on the Start menu, and right-click on Computer, then Manage, then i go to Device Manager, there is a yellow exclamation mark next to Universal Serial Bus (USB) Controller.
When I try to update them, Windows 7 tells me that an update could not be found blah blah blah...
This problem happened ever since I installed Windows 7 64bit over Windows 8 64bit.
So, can someone help me find drivers for this USB Controller? Or is this some kind of hardware failure or issue?
Please help? Anyone...!
Thank you!
This question was solved.
View Solution.

Hi,
Try installing the USB 3.0 driver on the following link.
http://ftp.hp.com/pub/softpaq/sp55501-56000/sp55975.exe
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HP Pavillion g7 Notebook needing Windows 7 64 Bit USB Controller Drivers

Hi,
I have a HP Pavillion g7 Notebook which originally came with Windows 8. I have downgraded to Windows 7 64 bit but I can not find the universal serila bus controller drivers for this version of Window.
I have a Intel(R) 7 Series/C216 Chipset Family USB Enhanced Host Controller -
1E2D PCI\VEN_8086&DEV_1E2D&SUBSYS_1845103C&REV_04\3&11583659&0&D0.
Intel(R) 7 Series/C216 Chipset Family USB Enhanced Host Controller - 1E2D PCI\VEN_8086&DEV_1E2D&SUBSYS_1845103C&REV_04\3&11583659&0&D0
HP Pavilion g7-2240us Notebook PC
Serial Number: [Personal Information Removed]
Product Number: C2M31UA
I Hope sumbody can help. I would hate to go back to Windows 8
Bob

Hi:
Use the W7 x64 drivers and software from the g6t-2000...the USB3 driver is under the chipset driver section.
DO NOT USE ANY BIOS OR FIRMWARE FILES FROM THIS MODEL
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5278...

How to remove old USB printer drivers and ports from Windows XP and Windows 7

We have several instances of HP 4250 Printers connected as local USB printers. When trying to replace this model with a HP P4015n or HP 600 M602n the new models will appear to install but won't print. No error messages but sometimes they try to install with ieee 1284.4 support which would seem to be a parallel port type. We're trying to use the HP UPD PCL 5. I'm looking for a way to completely remove the old printer instances, drivers and ports. While the printer icons and drivers seem to be able to be deleted the USB printer ports can't be deleted. Then when I go back and try to install the new model printer it can only use he existing USB port. Again, when that happens the new printer won't print. So I'm trying to get a completely fresh start with the XP SP 3 and Win 7 OS before installing the newer models. I've tried several methods to clean the USB printers but the instructions are never detailed and most times something is missing and the OS needs to be reloaded. I thought that I would see if someone who knows HP USB printers has any ideas...

These seem to be a commercial products. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

USB Rom drivers

Similar Messages

Maybe you are looking for