Usb & sdcard port wont work in windows 7

Hi all,
my usb & sdcard port wont work in windows 7, also i cant install drivers for coprocesor and the sm bus controller, I have a macbook pro 13" A1278,
I have tryed to install the drivers from the osx cd, but to no avail it just wont work,
Please can anyone help

the reason i ask is base system device can be a few differant things but about 90% of what i have seen it show up is the card reader. try to uninstall anything in device manager that has to do with the mic and restart the laptop. this will allow windows to try to find and install the correct drivers. also open realtek HD audio manager and make sure the mic is not muted.
-civicman4-
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind.

Similar Messages

Windows 8.1 64-bit USB 3 ports not working

I have a T430s computer model 2352CTO, running Windows 8.1, 64-bit version. Prior to upgrade from Windows 8.0 all drivers were updated. The USB 3 ports worked correctly, in particular running an external 1gb hard drive. After update to 8.1, the USB 3 ports still work, but only for about 30 seconds then the hard drive shuts down. The power light is still lit on the hard drive, but it no longer shows in windows explorer.
In device manager, I went to Universal Serial Bus Controllers -> USB Root Hub ->Properties->(under General it says "This device is working properly)->Power Management->Unchecked the box for "Allow the computer to turn off this device to save power". Unfortunately this does not seem to stop problem. Any ideas?
Solved!
Go to Solution.

Please try this:
http://blogs.msdn.com/b/usbcoreblog/archive/2013/11/01/help-after-installing-windows-8-1-my-usb-driv...
Thanks!
Houman

USB 3.0 Not working in Windows 8

Hello all,
I have a msi 990xa-gd55 and cannot get my usb 3.0 to work with windows 8. Everything worked when I had windows 7 installed, tried installing the windows 7 drivers but they do not work. There is no usb 3.0 windows 8 driver on the download page, anyone else having this problem or found a solution?

Quote from: xmad on 15-December-12, 02:34:59
Are you using the most recent bios?
7640vM5.zip 22.5
http://www.msi.com/product/mb/990XA-GD55.html#/?div=BIOS
Also, try a full cmos clear and see if that helps anything.
No I am not using the most recent bios, just the one that came with it when I bought it. It worked when I had it installed with windows 7, then i had it out for maybe 3 months and built a new comp with it. Do you think flashing to the latest bios would solve the problem? It could not hurt i guess. Also, yes, usb 3.0 is enabled in the bios.

Hp 15-D018TU USB SS PORT NOT WORKS

Hi, In my HP 15-d018tu Notebook PC the USB SS port not works.Can anyone look into this problem and guide me.
Thanks in Advance

Hi:
Did you install the applicable usb3 driver?
http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135422_1

USB Ethernet port not working after ML install

After installing ML I cannot get the USB Ethernet port to work. Have searched for andriod file transfer agent but cannot locate it as previously mentioned.

Same Problem over here. Has anyone a good idea how to fix this problem?
After installing ML i cannot get my original Apple USB Ethernet port to work (Macbook Air 2011).

USB ports not working in Windows-7 on MacBook Pro Retina Late 2013 after Bootcamp installation

1) INSTALLATION
Using Bootcamp (v. 5.1.1, OS X Mavericks) in combination with an original Microsoft installation DVD disc using an external optical CD/DVD drive. Note, the installation is NOT from an ISO image. In the Bootcamp setup window only the lower two of the three setup options are clicked, namely a) to download Windows-7 drivers to a USB stick, and b) to partition the harddrive and then to install Windows.
2) PROBLEM
After the initial Windows-7 installation no devices attached to the USB ports can be found under Windows-7. The ports are dead. Also the WLAN did not work, so no internet connection was possible.
3) CAUSE
The problem is caused when you use a USB 3.0 stick as destination for the Bootcamp driver downloads. It seems that Windows-7 cannot recognize the USB 3.0 stick properly during the Bootcamp/Windows installation process, thus failing to do perform a proper installation of the Windows-7 drivers.
4) SOLUTION
Use a USB 2.0 stick and everything will work perfectly.
Follow these steps in order:
1) Connect your external DVD drive to a USB port and insert the Windows installation disc
2) Start the Bootcamp utility
3) In Bootcamp, remove the failed Windows-7 installation and partition
4) In Bootcamp, redo the entire Bootcamp process, but this time using a USB 2.0 stick
5) Follow all further steps in Bootcamp and later in the Windows-7 installation process
6) At the end of the installation procedures you will be asked to confirm the installation of all Bootcamp/Windows drivers.
7) Bootcamp installs all the drivers and your Windows-7 installation will work perfectly.

Ok, where is this Intel driver? There is no such thing "program manager" so I am guessing you mean the Programs and features control panel, but on my machine that whole window is blank after a clean install. I still cannot get the USB ports to activate. Two fresh installs and several different USB sticks later and no luck. Should I just give up and go to Windows 8.1? I really need Windows 7 to work if at all possible. Other devices shows one USB controller without driver software so I suppose that's the culprit. There are other USB devices installed under the USB section of Device Manager, but they apparently have nothing to do with the USB ports themselves, just devices like the trackpad etc. I've spent two hours on this so far and it's getting out of control. Why doesn't this work with generic USB drivers?

Usb port wont work on macbook pro 13" late 2011

Hello, can anyone help please?
I have 2 usb ports but only 1 is working correctly, the other wont take flash drives or my iphone 4 they wont show in the finder or anywhere on my macbook, however my wd harddrive works fine in the same port.
just to be sure 1 port is working absolutely fine accepts flash drives and every thing this problem is only with one of the ports
This does seem to have happened after i installed mavericks but not sure if this is related

Though all USB ports may not have the same power output, based on what you describe on the 'suspect' port suggests a different issue. Take the devices that will not work on the 'suspect' port with the MBP to an Apple store genius bar and have the technicians inspect it.
You might try SMC and PRAM resets, but I have my doubts about success in your case:
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ht1379
These will not harm your MBP.
Ciao.

USB 3.0 PORT wont work...

I have a Toshiba Satellite P745-S4217.My only problem is that I can't get my 3.0 USB port to work.Kindly assist as it has been working before but now it can recognize any hardware.please someone........

what device are connecting to it, and are you sure the device your connecting to the laptop is working properly?
make sure your usb 3.0 driver is up to date.
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

My USB port wont work and computer is almost brand new

I have plugged in my iPhone 4 and synced it with my Macbook Pro when I first got it, now when I just tried to plug in a iPhone 5 it says there is a USB device already plugged in taking too much power and once it is unplugged my other USB devices will start working again. Problem is there is nothing plugged into my computer. I have tried command+option+esc but it shows nothing. I restarted my computer and then shut it down and started it back up again and it still tells me the same thing.

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help try a new usb cable for the iPhone
or contact Apple.

Usb midi controller wont work

Hi my edirol usb midi controller wont seem to work with gb 08 even though i have downloaded the driver.the midi controllers screen says that it is sending data and everything but still no sound...any help wouild be fantastic cheers!

Quote from: NovJoe on 14-July-08, 12:17:16
Do you have a wired USB mouse to try?
It seems to me that the drivers from the WIFI mouse is not of the correct version for the OS you are running on.
You may want to google for the correct drivers as well.
I have tried a wired usb mouse and that wont work either :(
There are only 1 set of drivers for the wifi mouse I have, checked on the manufactures website and the driver version is the exact same one as I have on disk. The mouse worked on my other pc with the exact OS
A ps2 wireless mouse works but that mouse has no range :(
Quote from: OKIGiveIn on 14-July-08, 03:05:35
Hi - I hope this helps. The problem may be hardware related in which case I can't help, but if not, try this.
Right click and delete both of the yellow mouse HID drivers in device manager. Then do a normal shutdown and Restart with the keyboard using Ctrl-Alt-Del to bring up Windows Task Manager.
This should force the system to reinstall drivers when it next boots.
You may find that a simple Scan for Hardware Changes also works after you have deleted the yellow drivers.
Another trick is to try the mouse in other USB ports - sometimes the system just gets confused and sets the device to a particular port. If it is put in another port it often can't find the device.
Good Luck
I have tried the wireless mouse in every usb port, also uninstalling them in device manager - all had no effect :(

2TB USB disks don't work under Windows 8.1. Enterprise Evaluation

Hi,
2TB hard disks don't get started in Windows 8.1. Enterprise Evaluation:
*** Error code 43
*** Unkown USB Device - Device Descriptor Request Failed
*** configured but not started
Hardware is OK i.e. this is Windows 8.1. Enterprise Evaluation problem:
~ the same USB hard disk worked before and after this with older Windows PCs
2TB seems to be challenge for Windows 8.1. Enterprise Evaluation:
~ it runs ok USB devices with < 2TB in the same PC and in the same port
Notes:
~ restart of Windows 8.1. Enterprise Evaluation did not help
~ Windows NTFS format is being used

try this solution
http://blogs.msdn.com/b/usbcoreblog/archive/2013/11/01/help-after-installing-windows-8-1-my-usb-drive-disappears-or-file-transfers-stop-unexpectedly-r-a-post-title.aspx
or if still not solved, I suspected this USB drive attached during Windows 8.1 installation, I suggest remove it at device manager and scan for the new device and lets see if windows can detect this HW, try also update all driver if there is any update for
this PC and update windows or update OS to pro version

Hp design jet 430 wont work with windows 7

hELP, i HAVE BROUGHT A USB CONVERTER FOR MY HP DESIGN JET 430 BUT THERE IS NO SOFTWARE TO ALLOW IT TO WORK WITH WINDOWS 7....OR AM I MISSING SOMETHING????

Hello @johnfaulkner36,
Welcome to the HP Forums!
To get your issue more exposure I would suggest posting it in the commercial forums since the HP Designjet 430 is a commercial product. You can do this at HP Enterprise Business Community.
The support page for your product may be helpful in the meantime:
HP Support Center.
I hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Usb video adapter not working in windows 8.1 on Hp Envy23

Since upgrading to windows 8.1 on my Envy 23 all in one, the usb video adapter stopped working. I cannot get my 2nd monitor to work. Anyone have a solution to this?

Hi,
It's not an HP product, please try its support page:
http://www.geniatech.com/download.asp?id=1
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

M537 photosmart My ddrivers wont work on windows 7

I have a photosmart M537 camera & Dock it works on windows xp but wont to know how i can get
it to work on windows 7 or 8 ? ty

Hi @kyblue325
According to the Camera Driver page, There is software for Windows XP and Vista, but not for Windows 7, or 8. Instead of connecting the camera to the computer, I suggest removing the memory card from the camera and inserting it into the computer if supported.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HDMI Port not working after Windows 10 Upgrade

My HDMI port quit working after upgrading to Windows 10. The VGA port works fine. I have triend many of the fixes for listed for this issue for upgrading from Windows 7 to Windows 8/8.1. Here's whay I've done so far... 1) Downloaded the most recent drivers for my Intel(R) Graphics Card. Outcome: It said the drivers installed were newer than the driver I was installing. Tried anyway, didn't work. 2) Uninstalled the driver and let windows update it.Outcome: Black screen, then it restarted and installed the same driver it had before. 3) Tried installing the Windows 7 Driver for my Intel(R) Graphics Card. Outcome: Black screen, then it restarted and installed the same driver it had before. 4) At this point I tried the last resort. I spun around three times in a circle and spit in the corner.Outcome: Wife yelled at me and kids thought I had a demon. Please help, I use this computer in the office to connect to a 65" TV and I NEED my HDMI port.

Yeah, lot's of people on this forum have stated they have the same issue. It's not just people with Intel/AMD switchable cards either. I have an AMD 8650G + 8670M dual grapgics card and I am having the same issue.

Usb & sdcard port wont work in windows 7

Similar Messages

Maybe you are looking for