USB Serial Controller Driver for windows 7 64bit

USB Serial Controller Driver for hp 15-g049au windows 7 64bit
This question was solved.
View Solution.

Hi,
Install the Chipset drivers on the following link and reboot.
http://support.amd.com/en-us/download/chipset?os=Windows%208.1%20-%2032
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • Cannot install NEC USB 3.0 Driver for Windows 7 - Now no USB 3.0

    I was trying to update the usb 3.0 driver on my G770 - connecting a USB 3.0 portable drive (or USB 3.0 flash) would slow down Windows and browsing from folder to folder would hang.
    I downloaded the latest driver from the site...
    NEC USB 3.0 Driver for Windows 7 (32-bit, 64-bit) - Lenovo G770 Notebook (IN5CAR01WW5.exe)
    and it asks for Renesas Electronics USB 3.0 Host Controller Driver disk during the installation.
    Renesas Electronics USB 3.0 Host Controller Driver for Windows XP exists but the driver for Windows 7 is NEC USB 3.0 Driver for Windows 7 (32-bit, 64-bit)
    What to do?
    error:

    Use the windows XP driver. They normally work fine.

  • Satellite A210-16G Mass Storage Controller driver for Windows Vista 32-bit

    Hello, I need Toshiba Satellite A210-16G Mass Storage Controller driver for Windows Vista 32-bit. If you have setup file, please redirect me, if you have any other file, please explain me where to install it.

    If I were you I would take look to the Drivers Download site of the Toshiba mainpage, because there you can find everything you need.
    The mass storage controller can either be the HDD controller or the SD-card controller. I would download both of them.
    Heres a direct link to the Drivers page: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
    Greets

  • Usb 3.0 driver for windows 7 64 bit hp 23-b011 all in one

    I have a hp 23-b011 that is a all in one computer. I downgraded the operating system to windows 7 64 bit because I prefer windows 7. Anyhow I need my usb 3.0 driver to work . I have tried the driver SP57875 it does not work. also have tried do the %temp% and copy it to the desktop and run it and it still does not work. If I am trying the wrong driver please let me know.
    When I go to device manager and to the universal serial bus (usb) controller and right click properties and go to details, there is no information it only says universal serial bus (usb) controller. I have the AMD E2-1800 APU with Radeon(tm) HD Graphics 1.70 GHz processor.
    Please let me know if I need a different driver thank u
    This question was solved.
    View Solution.

    Hi:
    Download and install both of these drivers and reboot.
    http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943835&swItemId=ob_139250_1&swEnvOid=405...
    http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943835&swItemId=ob_133037_1&swEnvOid=405...

  • USB RS232/4 Driver for Windows CE

    I'm using USB RS232/4 device well with my laptop. I wonder whether i can use the device directly connected with Windows CE system instead of Windows XP system.
    I have LabView PDA Module and a single board computer operated by Windows CE.NET 4.2.
    Is there any driver of the device for Windows CE system?

    Windows CE is very different from Windows XP and currently the NI-Serial drivers is not supported on Windows CE. If you feel that this would be a valuable feature please file a product suggestion by going to Contact NI and click on the feedback link.
    -Josh

  • Multimedia audio controller driver for windows 7 on compaq presario r3000

    I installed Windows 7 on Laptop Compaq Presario R3000. Everything is fine, however, multi media controller driver was not installed. I would appreciate if you let me know where I can get it. I have Driver CD for Windows XP that came with my computer. Thanks.
    This question was solved.
    View Solution.

    You're very welcome.
    Looks to me like you have to manually install the XP audio driver as follows...
    Download and run this file.  If it installs the audio, great.  If not...close out of any error windows.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-18403-1&cc=us&dlc=en&lc=en&...
    Go to the device manager and click on the multimedia audio controller needing drivers.
    Click on the driver tab.  Click on Update Driver.  Select the Browse my computer for driver software and browse to:
    C:\SWSetup\sp27325\SMAXWDM\W2K_XP\smwdmNV8, and select the SoundMAX Integrated Digital Audio device from the list and see if the driver installs that way.
    Then reboot.

  • LSI 1394 OHCI Compliant Host Controller driver for Windows 8.1

    I have an HP Z600 with a LSI 1394 OHCI Compliant Host Controller and get an error. It is a "This device cannot start. (Code 10) STATUS_DEVICE_POWER_FAILURE error
    When Windows 7 is installed, there is no error but with Windows 8.1 running there is this error.
    There are no installed legacy drivers that I can use and I have tried many different permutations of driver installs.
    Any thoughts?
    Thank you in advance.
    Sal

    Hi:
    You may also want to post your question on the HP Business Support Forum -- z Workstations section.
    http://h30499.www3.hp.com/t5/Workstations-z-series​-xw-series/bd-p/bsc-272#.VIMqRDh0zGg
    If you tried manually installing the W7/W8 driver (I have no clue which one of the several LSI drivers listed that you need), then that would have been the only suggestion I could have offered.

  • Need USB 3.0 driver for Windows 7 running in Fusion

    Greetings -
        I have a MacBookpro Retina that is about 3 weeks old.  So far it is running fairly well.  I have installed Fusion5 and am running Windows7 Ultimate 64 bit.  I have run into an issue however with my WD my passport 2tb USB3.0 drives.  they are seen in OS X 10.8 and work fine.  but when I try to attach to them with Windows 7 I get a message that the drivers are not installed and the drive is NOT seen in My computer.
      I have narrowed it down to be a driver issue because when I attach the drive to a USB2.0 hub the drive is seen and works fine. I have to run Windows 7 as windows 8 performance is totally unacceptable and I discovered that some software I have that is windows only is not compatible with Windows8.  I have tried a couple of intel drivers but they won't install so I am guessing I am trying to use the wrong ones.  If they are in the support software for boot camp they are not redily recognizable since I have all that and there is nothing marked USB3 support. 
      I am headed to Afghanistan soon (contractor) so I really need to get this thing working properly.  any and all help will be greatly appreciated.
    Cheers, RDJ

    Post on the Fusion forums:  http://communities.vmware.com/community/vmtn/desktop/fusion

  • Hp pavillion 15-b142dx usb 3.0 driver for windows 7

    Have a hp sleekbook 15-b142dx and down graded from windows 8 to windows 7. Can't find the right driver to make the two USB 3.0 ports work. The 2.0 USB port works just fine.
    This question was solved.
    View Solution.

    Again you fixed it. Thanks so much!!!!!!!!!!

  • Usb 3.0 driver for windows 7

    my usb 3.0 is not working
    i need the driver

    Hi:
    Download and install both of these drivers and reboot.
    http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943835&swItemId=ob_139250_1&swEnvOid=405...
    http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943835&swItemId=ob_133037_1&swEnvOid=405...

  • Writing USB-Serial Converter Device Driver for Windows CE 6.0

    Dear Developers,
          I have a Silicon Labs chip Cp2108. Its a Quad USB to Serial converter. It supports all the operating systems except Win CE. So I have the source code of the driver for Linux 2.6 / Linux 3.0. I have experience in Device drivers development
    in Linux.
      Question is How will I start coding driver for Windows CE 6.0. Can anyone point me to a best starting point on this topic. All I need to do is make this chip work with WIN CE 6.0. Can anyone point me to a Sample driver source code It will be great.
     Regards,
         Winston

    Dear Vinoth, 
            Thanks for the valuable reply. 
      I am confused a bit here. I need to make the external USB -UART bridge (CP2108) work on win CE 7.
       the driver in Path \WINCE600\PUBLIC\COMMON\OAK\DRIVERS\USB\CLASS\USBSER is using the built in USB controller
    hardware and making it as a Serial port right ? 
       How do you go about making the external USB -UART bridge work as a COM port ? 
     I have a document from SIlicon Labs which gives info about Device descriptors and interface commands . 
      Regards,
        Winston 

  • HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit

    Dear
    I need
    HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit
    can anyone provide me ? no links to read text, direct solution is welcomed
    thanks in all

    Hi.
    You may download the Universal Print Driver PCL5 below, it is compatible with both Windows 7 or 8 64-bit.
    For USB select Plug n Play, for network select Tradiotional Mode and follow the steps by setting a TCP/IP Port with the IP Address of the printer:
    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=29790&spf_...
    Please let me know of any issuesm
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • I am confused by the installation step that requires you to create a bootable USB drive for windows installation.  What is the ISO image and why has it selected my Passport backup drive as the destination disc?

    In the bootcamp installation it asks me to create a bootable USB drive for Windows Installation.  To do so, I must choose an ISO image.  What is that?  When I click "choose" I don't understand the options presented.  Is this the destination of the partition or where Windows will reside on the Mac?  Why does it also indicate the the destination disk si my WD Passport Back up drive?

    OK, so I have an apple superdrive hooked up to my mini (along with my Passport back up drive).  I also have  the discs for both 64bit and 32bit Windows along with the product key.  I am still not sure what to do when faced with the options after "choose".

  • WINDOW 8.1 Cant find USB 3.0 Driver for H87 G43 Gaming

    Cant find USB 3.0 Driver for Win8.1 64bit.

    i don't see such drivers for Win8:
    https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProdId=3467
    probably Win8 already include those drivers

  • X-fi elite Pro Driver for Windows 7 64bit

    )X-fi elite Pro Driver for Windows 7 64bitH Hi all
    I've read in the past and toady some topics about the x-fi drivers and windows 7.
    Due to the fact, that I want to install win7 64bit in the next few days, i just want to know which drivers I should use for my Elite Pro.
    Currently I'm using XP and got no problems with the drivers yet, everything could be installed with the cd from my elite pro package.
    So as far as I understood the topics correct, there are 3 option which drivers i could use:
    . Orignal Creative windows 7 driver
    2. Daniel_k support pack
    3. Pax drivers
    Can anyone tell me the advantages or disadvantages of these drivers? Important for me are the "gaming" utilities and THX for my 7. Teufel system.
    Which dirvers should i use and work without problems?

    - i have? windows 7? 64 bit
    ? and having trouble with an older version
    ? SOUNDBLASTER AUDIGY PLATINUM ex
    ? i cannot get it to open mixers, or other Audigy functions.
    ? even with downloading Windows 7 driver from Creative.
    ? doug barron? 902 425 8836

Maybe you are looking for

  • Feature can not be recognized

    It seems I am facing a problem with feature can not be recognized for leaving action (PA40) Leaving is supposed to have MSN 20 with program generated 1PAPA/FEAT000MSN20 but my client has different program generated which is $P00003U. How do I change

  • InDesign CS6 colors to Corel Draw 12

    I've designed a logo and stationery for a small business customer. The logo has 2 Pantone colours. The offset printed letterhead has a 7% tint for a graphic element (curved stripes) printed in Pantone #137 (orange) as a large watermark on the page. I

  • A bug? BC4J ViewObject where clause change doesn't affect view contents

    Hi! I've found the following interesting behaviour (maybe a bug?) of BC4J ViewObject caching: 1) make a viewobject with where clause and 1 parameter in it. 2) set parameter binding to some value 3) execute query 4) then change viewobject's where clau

  • At selection-screen on end of

    hi to all pls tellabt the event at selection-screen on end of  and at selection-on block plsa give some sample coding on theese  points will be rewarded

  • Pop-up browser problem in Internet Explorer

    I've created a flash file that consists of a button that launches a pop-up browser. Here's the code I attached to the button: on (release) { getURL ("javascript:spawnWindow(' http://www.google.ca/','pop-up window','toolbar=no,location=no,status=no,me