USB Share Drive and Windows

Hooked up my USB drive and had an easy setup. Set a disk password (not users, not device - don' know what this is, maybe the router). Works fine from the Macs.
For Windows Vista, shows up in the network as the router name. If I double-click to open I get a standard authentication box. However, I can't get it to take. There is no 'user,'but using the computer logon name or others doesn't seem to work. I assume the password would be the one I set up in the Airport Utility.
Suggestions?

Thanks, using the IP address is a good tip. I'm not quite ready to map the drive, but this helps in browsing it as a test case. I set up one dummy user and was able to get in that way.
My question is still - **what's the user name if you're just using the disk password?** I was trying to just setup one disk password, yet I'm still prompted for the 'Username' and can't get by it.
I could replicate the users accounts for the drive, but that's extra maintenance to keep it sync with a network user list. I'm not sure it functions as a true 'public' drive if I do that (may keep the files separate).

Similar Messages

How to download pictures fm i-photo to USB flash drive and/or to a cd

How can a person download pictures from i-photo to a USB flash drive
and/or to a cd with the purpose being to share the photos with another
group using a laptop computer to control and project images to a screen.
I can't find instructions anywhere in apple help. Please keep it simple.
Thanks.
LAS (Learning Apple Stuff)

Select the pics in the iPhoto Window and go File -> Export and export them to a Folder on the desktop. Then drag that folder to the USB drive / or burn it to CD with the Finder's Burn command.
Regards
TD

How to install USB flash drive in windows 7

Could anyone please help to install USB flash drive to Windows 7. This will enable me to hook up keyboard and mouse to my laptop. Thank you so very much for any assistance.

Hi,
Could you please help us to know what is your computer, Please use the following instructions for find out the model/product of your machine:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00033108
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Installed new hard drive and windows 7 at the same time. Left old hard drives in computer but unable to get bookmarks from old drives to new.

Installed new hard drive and windows 7 at the same time. Left old hard drives in computer, installed firefox however I have no idea in which file the old bookmarks are located. I still have the old files for firefox in the old drives.

Your "Firefox personal data", like bookmarks, are stored in your Profile folder in Firefox. See this support article about how to recover that data from that old hard drive and transfer it your your new Profile.
http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

Booting from a USB Flash Drive and Optimizing Performance

I know that you can boot Leopard from a USB flash drive, and I have a 16GB flash drive I'm using as a bootup disk on this 2006 MacBook I have that has a broken hard drive (it was recalled, but the recall ended in 2010).
The problem is that it's very slow. I have about 8GB of free space on it, so it can't be the VRAM being too small. The USB speed just stinks. There must be ways to optimize the OS to run off of a slow drive by accessing data as infrequently as possible. What can I do to speed this up? Should I disable hard disk sleeping? Should I use some kind of Mac tuneup/optimization tool's feature?
I plan to get an internal hard drive for it, but I'm stuck with this for a while.

Not all USB2 Flash drives are equal, in fact I bought 2 16 GB USB drives for cheap, as along side of them were even the same brand 16 GB Flash Drives just a different model, for 5 times as much!
Me was thinking how bad could they be? Well, they could be 5 times worse than other USB2 flash drives... LOL on me!
They under extremely rare occasions will Read or Write at 5 MB/s, & very often 1 MB/s...
My Buffalo Flash drives do near USB2's top speed, see some diffs...
http://usbspeed.nirsoft.net/
Optimizing yours will give little benefit.
You could also do a USB2 RAID0 setup if you have enough ports.

IMac, MacBook Pro, 750GB USB Hard Drive and Time Machine

I have my external hard drive partitioned and directly connected to my iMac. Time Machine mounts and backs up one partition. I have the other partition configured to share off of the iMac. The MacBook Pro sees the partition in time machine but the back up fails every time. I understand that the drive won't allow the two Macs to back up at the same time, so I've shut off Time Machine on the iMac....still no success. Could someone please point me in the right direction.

So I have made some head way regarding this odd problem. Turns out my memory card reader is fine I think. My memory card reader will eject on the right port using a 4GB Lexar 133X professional CF card but NOT on the left USB port. However ALL 3 of my sandisk CF cards work fine in the reader on both USB ports. These 3 cards range from all different speeds from 15MB/sex to 30MB/sec. My lexar is 20MB/sec rated. Go figure!?
As for the Western Digital My passport USB 3.0 drive I have come to the conclusion its the drive and not the port. Reading through various forums on Anandtech, Apple Support and the Western Digital website forum many people have had issues with these drives on USB 3 ports on both Windows and on the Mac.
http://forums.anandtech.com/showthread.php?t=2302617
http://community.wd.com/t5/External-Drives-for-PC/My-Passport-2TB-USB-3-0-keeps- randomly-disconnecting-HELP/td-p/477224

New Hard drive and Window disc

I bought a dv6-6047cl before, and the hard drive is not working now. (No window disc with the laptop)
So i buy a new hard drive,after i put the new hard drive and it shows me
DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
What should i do?
Someone told me i should buy a new window 7 Home to RESTORE TO FACTORY SETTINGS. Is that right?
If yes, which CD should i buy? Can you show me the picture?
If not, what can i do?

you download the ISO then you need use the Microsoft tool to make the bootable memory stick or cd.
Use the links in my 1st post for the Microsoft tool & a guide on using it.
Once you have your boot media made you need plug in the usb stick or load the cd & then boot notebook & enter boot option menu & boot from cd or usb drive pending on what you decide use.
A very basic guide on installing windows 7 is in link below, don't follow it blindly, just use it as a rough guide as needed & think twice, do some research or ask questions if hae doubts<>problems ...
http://www.wikihow.com/Install-Windows-7-for-Beginners
Like my post? Click Kudos (thumb+) to show appreciation.

Hello I just bought the usb super drive and for some reason when I put the disc in and download the application it won't show.Just a bunch of words will show up.

Hello I just bought the USB super drive for the mac book pro and for some reason when I put the disc in and I download the content and for some reason when I put the aplication just a bunch of random words come out,not the content the disc brings.

Ok, I hope I'm not steering you in the wrong direction, but I've just found this on the support site for the software.
Interchange Interactive Whiteboard Software System Requirements
Please note: These discs work on Windows PCs only.
Minimum System Requirements
Pentium II 300 MHz processor
Windows 98 / ME / 2000 / XP / Vista
64 MB RAM
50 MB free disk space if not installing onto hard disk
1.44 GB free disk space if installing (recommended)
4x CD-ROM drive
800 x 600 screen resolution displaying 16-bit color
Sound Blaster compatible sound card
Mouse or other pointing device
Headphones or speakers

USB flash drive and Airport Extreme

I got an Airport Extreme, and one of the reasons why is so that I can have a drive attached to the router so that I don't have to leave on a computer for file sharing or go in and boot up the computer when I needed some files. I am using a 16GB USB flash drive at the moment formatted with FAT32 (no mac in the house). I tried to backup some stuff on it, a bunch of smaller files in a folder totalling about 4.3 GB. The base station keeps rebooting itself in the middle of the transfer.
I saw some threads on here that are hinting that Airport Extreme doesn't work well with any type of external storage, whether an actual HDD or a flash drive. Those were somewhat dated. Is there a way to fix this? I'm using the latest firmware.

OK, I feel silly on this one.
After looking for issues with the airport and not finding any and needing a file from my backup drive, I had to connect it up to my PC. That's when I found my solution.
The Drive I had connected had stopped responding. That's why the Airport was not showing it and not allowing connections. I had power cycled the drive a few times while testing, just not long enough. I unplugged the drive for 2 minutes, all cables, then reconnected. After about 5 minutes, the Airport was able to confirm the drive and turned the share back on.
Hope that helps.

USB ports/drives in windows with boot camp?

Windows (explorer) in Boot Camp does not recognize any usb ports/drives on my new iMAC (mountain Lion). Got the MAC 6 days ago - installed a new windows 7 package using boot camp with the (optional) usb superdrive drive. I have reinstalled (repaired) the windows support software - no change. BTW, after installing windows 7 I downloaded all updates, 140+, my windows, os X, and boot camp are up to date. Any suggestions? Thanks........jam

Did you download and install teh Windows support software which includes all the necessary Windows drivers for your computer?

Usb hard drive and AirPort Extreme

I have been using an external usb hard drive connected to my Airport Extreme to store music which is then picked up by a Sonos system to play music even when my iMac is switched off - has been working great. However I became aware recently (and I think this pre-dates upgrading my iMac to Mountain Lion) that my external hard drive no longer shows up as a shared drive within Finder. If I go into Airport Utility / Edit / Disks - 'enable file sharing' is checked. Disk Utility doesn't see the drive but I'm not sure that really means anything as a network drive rather than a drive connected directly to the iMac.
Has some recent upgrade disabled network drives on Airport Extreme's (ie assuming we are all now backing up to iCloud so don't need it)?
Thanks

OK, I feel silly on this one.
After looking for issues with the airport and not finding any and needing a file from my backup drive, I had to connect it up to my PC. That's when I found my solution.
The Drive I had connected had stopped responding. That's why the Airport was not showing it and not allowing connections. I had power cycled the drive a few times while testing, just not long enough. I unplugged the drive for 2 minutes, all cables, then reconnected. After about 5 minutes, the Airport was able to confirm the drive and turned the share back on.
Hope that helps.

Integrating an NI-USB 8451 driver and Labview Run-Time Files in an installation package of a .vi application

Hello,
I've built a .vi which uses the NI-USB 8451 device (please see http://sine.ni.com/nips/cds/view/p/lang/en/nid/202368), and I would like to create an installation package to be used on a costumer's PC, which has no Labview installed on or a driver for this device.
I would like to have this installation as a completely stand-alone setup, so that the user could take this file and run it, and have the driver to the 8451, the run-time files for the Labview application installed by themselves, and have the .exe file working on a completely "clean" PC.
How can I integrate it all in one package ?
Thanks,
Michael.

Nice hearing from you again, Ipshita
I do not call any dll's currently, but am using the driver of the USB device, NI-USB 845x, version 1.0.1
Now, I would very like to make the use of my application, by another user, with no Labview or this driver on his PC, as simple as possible.
I just thought that maybe I could create an .EXE file with some Labview created dll's, which this executable would use, and spare the need of the 845x Driver or Labview Run-Time library prior installation. I could be wrong.
What should I do ?
P.S.
Meanwhile, I've been playing with the Application Builder and tried to create an installation with the Driver and the Labview Run-Time.
It had started the compile, but stopped with the following pop-up window: "Locate the 'NI-845x Software 1.0.1' distribution. Labview needs to copy a component installed or updated by the distribution..."
(Attaching the pop-up window below)
What is it looking for and where can I find it ?
Thanks,
Michael.
Attachments:
Installation_pop-up.JPG ‏20 KB

S400 usb 3 driver for Windows 8

Hi Guys,
i was wondering if you could point me to a link for USB 3 Driver for the lenovo S400 for Windows 8?
I can't find it on the download link on the support page. Thank You.

Hi
Welcome To Lenovo Community
USB 3.0 drivers are actually not required for windows 8 as it will be automatically identified
If you wish you may try the following drivers Intel USB 3.0 Driver
Do give this a try and let us know
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español

Portable Hard Drive and Windows 8

Hello, I have a Toshiba portable hard drive model #HDDR640E04X. It works great on a Windows Vista 64 bit machine and has for years. However, now that I have a new laptop with Windows 8, it will not read the drive. It has downloaded drivers from Microsoft when I have plugged it in via USB. It will recognize the drive and assign it a drive letter, but there is no way to access data. Any ideas? I looked for drivers or other patches on the Toshiba web site for this model and none were available. I'd prefer to be able to use this on both computers and not have to buy a new portable hard drive. Thanks.

This device cannot start (Code 10)
Does the drive have it's own power supply or does it depend upon power from the USB port?
If the latter, I suspect the port does not supply sufficient power.
To confirm that, see what happens with a powered hub like this one.
-Jerry

Exernal Drive and Windows shared drive

Wow! I guess Leopard wasn't all it was cracked up to be. Since upgrading, I no longer have access to my shared drive on my windows desktop, nor do I have access to my Airport connected external USB drive. Although my finder shows both drives, when I attempt to access them, it just says connecting. Any help will be appreciated.
My Config,
MBP running Leopard connected wirelessly
Airport Extreme
XP Desktop with 2 shared drives plugged into 10/100 APE
Mybook 350 connected to APE via USB 2.0

Is this an NTFS drive? If so I think you have an issue with its security settings. Pull up the properties of the drive and click on the security tab and look at who can do what - I expect you will see "names" relating to your old laptop. I would suggest a google for "NTFS external drive permissions" and I would expect you will find some step by step guides to sort it.

USB Share Drive and Windows

Similar Messages

Maybe you are looking for