Usb speakers dont work after installing windows 8.1

speakers not working and not getting recognized. Make: Bose . Normal jack input works
pls help

Hi,
For this issue, please check with the manufacturer to know whether this speakers is compatible with Windows 8.1 RTM.
You may test this speaker on other computers, if this speaker can work fine on other computer with Windows 8.1, it appeared to be driver issue.
I suggest we open the device manager and update the driver for speaker to check the issue.
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • Dvd/cd player won't work after installing windows 8.1

    I recently installed windows 8.1 on my Pavilion All in One Desktop Computer and now the computer won't recognise the DVD/CD player. I have downloaded all current drivers, but still not working. Any ideas?

    Hello Gindel95,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how the DVD/CD player will not work after installing Windows 8.1, and I would be happy to assist you! To begin, I will need to ask you a few questions:
    What is the Product and Model Number of your desktop computer?
    What version of Windows did you have installed on your computer before upgrading to 8.1?
    Has your computer completed all of its important Windows Updates?
    In the meantime, I recommend following this document on Download or Update Software and Drivers for HP Computers, which should help configure your DVD / CD drive.
    Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Hp pavilion g6-2305tx left side usb 3.0 not working after installing windows 7 home premium

    Hi ,
    The left usb ports are not working on my pavillion g6 2305tx after a fresh win 7 installation. Already installed chipset drivers, but this doesnt solve the problem.
    Please check the screenshot below.
    Kindly help.
    Thanks

    Hi,
    Please try installing window 7 USB 3.0 driver for the following issue
    For Win 7 64 bit
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?
    cc=us&lc=en&dlc=en&softwareitem=ob-102571-1
    For Win 7 32 bit
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescript
    ion.jsp?
    cc=us&prodSeriesId=5260575&prodNameId=5260578&taskId=135&swItem=w
    k-106309-1
    Regards,
    Sumit
    I am an HP Employee.
    The opinions expressed here are my personal opinions, not of HP.
    Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.
    Click on Kudos if my post helped you.

  • USBs not working after installing Windows 7. Please assist.

    HP - Beats Special Edition
    Model: 15-p030nr SKU: 7018105
    Problem: 3 USB ports are not working. Does not acknowledge devices plugged into any of the PORTS. 
    I installed Windows 7. I install all the drivers listed on http://support.hp.com/us-en/product/HP-Beats-Speci​al-Edition-15-p000-Notebook-PC/6936229/model/71742​...
    I notice there is not any CHIPSET driver folder. 
    Already attempted START/DEVICE MANAGER/UPDATE DRIVERs. None could be found. 
    Please advise.
    This question was solved.
    View Solution.

    Hi:
    See if downloading and installing the amd chipset drivers works for you.  Reboot after install.
    http://support.amd.com/en-us/download/chipset?os=W​indows%207%20-%2064

  • Tapping no longer works after installing Windows 7 RC using boot camp.

    After installing it i found that tapping to click no longer works in either OS X or Windows. I've checked system preferences and it is still ticked and all other gestures work except double tap and single tap. How do i fix this?

    OK, here's what you do.  I'm assuming that you've got the partition laid out and your drivers ready:
    Insert your Win 7 Upgrade DVD and hold down the C key while restarting the Mac  This boots Setup
    Run through Setup once, formatting your Boot Camp volume.  For this go-around, use a Custom install
    You will get to a point where you are asked for your Product Key.  Skip this request now!
    Install the Boot Camp software
    Next, go back to your Win 7 Upgrade DVD and allow the AutoRun.  Click Install Now on the window that opens.
    You're in Setup again.  This time, do an Upgrade.  You should be back at your Desktop when this runs through.  If asked for the key again, skip it.
    Click Start > Computer
    Now click System properties
    At the bottom of the System Properties window is a link, Change product key.  Click this link.
    Enter the Upgrade key now while you walk through activation.  It should be accepted this time.
    We've just tricked Windows into thinking it was upgraded, thereby fulfilling the license requirement.  This method works because the installer makes no check as to what specific versions of Vista or 7 the upgrade will qualify on.  In this way, it is possible to "clean install" an upgrade copy for about $100 less than a full copy.
    Nate

  • Premiere Pro won't work after installing windows 8.1

    Hi,
    I have recently installed Windows 8.1 on my laptop. After the installation was completed I got an error message when I tried to open Premiere Pro CC. The error message says the program can't start because MSVCP110.dll is missing and that I should reinstall. I don't want to reinstall as I'm worried about losing work. Any help would be much appreciated.

    Hi,
    Firstly I must apologize for not replying to this earlier. I have done as suggested restarting my computer after installing but I still get the same error message.... I know I've left this response very late but any help would be much appreciated.

  • Keyboard and Mousepad does not work after installing windows support software.

    I was able to successfully install windows 8.1 64bit on an late 2012 iMac. I went through the installation just fine with the mousepad and keyboard. I went into the desktop and open up the files and went to computer to download the windows support software. After it was done installing the windows support software, my mouse and my keyboard stopped working completely. I couldn't even click "finish" on the download. I turned the computer off by pressing the power button, then turned it back on. I held the option key and the Macintosh HD and Windows showed up. I turned the mousepad and keyboard back on and it was working again. So I clicked on Windows and as I enter the startup screen, the mouse and keyboard  stopped working again.
    Computer: iMac 21.5 in. late 2012
    Used Windows 8.1 Pro 64bit
    The keyboard and mousepad that I have is  bluetooth.

    Hi,
    Have you checked it from Sounds yet. Please
    Right click the speaker icon
    Select Recording devices
    You should see a "tick", otherwise Right click it and enable it.
    Regards
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Webcam not working after installing Windows 7

    Help please, I have been trying to fix this problem since I purchased this Touchsmart IQ524 and installed Windows 7. I have installed every update on the HP site per insturctions. The only time my webcam works is if I return to vista operating system, which is unexceptable. I should have waited to purchased after windows 7 came out. This is the worse HP computer I have ever owned and the worse customer service. When this orginially happened I was told I had to stay on Windows Vista and customer support did nothing for me. Its been over two years and I thought I would find a repair solution on the HP page, I have tried them all and still now webcam working. I am lost and very angry. I get a code 43 error when trying to load the webcam drivers. My computer keeps giving me a message that windows does not reconize the device installed on my computer. It states its is an unknown divice. I have tried to unstall it, but everytime I restart my computer it reinstalls it.  Please help me, I paid over a $1000.00 when this computer came out, HP gave away free windows 7 update when I purchased this computer and my Webcam has never worked since. 
    Thank you.
    Arby96
    {Personal Information Removed}

    arby96 wrote:
    Help please, I have been trying to fix this problem since I purchased this Touchsmart IQ524 and installed Windows 7. I have installed every update on the HP site per insturctions. The only time my webcam works is if I return to vista operating system, which is unexceptable. I should have waited to purchased after windows 7 came out. This is the worse HP computer I have ever owned and the worse customer service. When this orginially happened I was told I had to stay on Windows Vista and customer support did nothing for me. Its been over two years and I thought I would find a repair solution on the HP page, I have tried them all and still now webcam working. I am lost and very angry. I get a code 43 error when trying to load the webcam drivers. My computer keeps giving me a message that windows does not reconize the device installed on my computer. It states its is an unknown divice. I have tried to unstall it, but everytime I restart my computer it reinstalls it.  Please help me, I paid over a $1000.00 when this computer came out, HP gave away free windows 7 update when I purchased this computer and my Webcam has never worked since. 
    Thank you.
    Arby96
    {Personal Information Removed}
    Which version of Windows 7 is installed? (32 or 64-bit)
    I see there is a BIOS update available only in Vista. You may wish to consider cloning your hard disk to an external storage device. Macrium Reflect Free is ideal  for this. Recover your OS to the Vista OS and apply the BIOS update. Use Macrium Reflect and the clone image file that you created to return your notebook to Windows 7. Once you have done that, try the webcam updates available at the HP web support portal for your TouchSmart notebook.
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Logitech USB Speakers not working after upgrade to Yosemite

    After upgrading my MacBook Air to Yosemite, my Logitech Z305 USB speaker no longer work.  In fact, it isn't even recognized in the Output list in Sound in the System Preferences.  It worked nearly all the time with Mavericks, with an occasional need for a system reboot if no sound was coming out, but it was always displayed under the Output tab regardless.
    I just killed the coreaudiod process in the Activity Monitor, but this didn't do anything of note.
    Any ideas of what has to happen for these speakers to work again?
    Here are the system specs:
      Host Controller Location: Built-in USB
      Host Controller Driver: AppleUSBEHCI
      PCI Device ID: 0x1c2d
      PCI Revision ID: 0x0005
      PCI Vendor ID: 0x8086
      Bus Number: 0xfa
    FaceTime Camera (Built-in):
      Product ID: 0x850a
      Vendor ID: 0x05ac  (Apple Inc.)
      Version: 6.46
      Serial Number: CCGBCM031JDL8LLX
      Speed: Up to 480 Mb/sec
      Manufacturer: Apple Inc.
      Location ID: 0xfa200000 / 3
      Current Available (mA): 500
      Current Required (mA): 500
      Built-In: Yes
    Hub:
      Product ID: 0x2513
      Vendor ID: 0x0424  (SMSC)
      Version: b.b3
      Speed: Up to 480 Mb/sec
      Location ID: 0xfa100000 / 2
      Current Available (mA): 500
      Current Required (mA): 2
      Built-In: Yes
    BRCM20702 Hub:
      Product ID: 0x4500
      Vendor ID: 0x0a5c  (Broadcom Corp.)
      Version: 1.00
      Speed: Up to 12 Mb/sec
      Manufacturer: Apple Inc.
      Location ID: 0xfa110000 / 5
      Current Available (mA): 500
      Current Required (mA): 94
      Built-In: Yes

    I zapped the PRAM and SMC, but that did nothing.  https://discussions.apple.com/docs/DOC-3604
    The speakers are still not recognized, nor do they work. 

  • Satellite M100 sound not working after installing Windows 7

    Everything else is working after this upgrade except the sound.  Have tried everything.  Any suggestions?
    Many Thanks.
    Rory

    Hi,
    For me the case is clear: Windows 7 is not the market as yet and its not released as yet. So I think this is the problem.
    Anyway, have you tried to install the driver from the Toshiba website? There you can also find the Synaptics driver. Its for Vista but normally the drivers for Vista are also work in Windows 7. Its worth a try.
    http://www.csd.toshiba.com
    Have you tried the key combination FN+F9? So you can enable and disable the touchpad but I doubt that this works. Normally you need the Toshiba utility for this
    Greets

  • My built-in webcam stopped working after installing Windows 7 - HELP!!

    I have an HP Pavilion dv6636nr Entertainment Notebook computer.  It came installed with Windows Vista and I just recently installed Windows 7, 32-bit onto it.  The built-in webcam worked for a short time, but now it doesn't even show up in the device manager and no longer functions.  I don't know if there are drivers in conflict or what, but I am very frustrated.  Any help anybody can provide would be greatly appreciated, as HP no longer supports this laptop because it's OLD.   Thanks!

    Hi,
    Please use this to fix
      http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02452221&lc=en&cc=us&dlc=en&product=3761191    
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Scanner not working after installing Windows 7

    Just installed Windows 7 and lost the ability to use the scanner function in Adobe.  My scanner still works with my HP C6380 softwar
    e.  Was wondering if another driver was available for Windows 7.  Yes or no, send if possible
    I am usin Acrobat 9.0
    I have already done the following.
    1)    a. Launch Acrobat
           b. Click menu File->Create PDF->From Scanner->Custom Scan...
           c. In Custom Scan dialog, select the driver installed.
           d. Click Options button in Input section.
           e. Set Data Transfer Method as Native Mode.
           f. Initiate Scan process. Or, remove any compression settings in scanner's user's interface while scanning (Set compression to None).
    2) Login with new user Account
    3) Deleted Preferences folder.
    4) Download the update for 9.1.
    5) Repair Acrobat installation.
    6) Scan the image into another application as a TIFFfile, and then convert the TIFF file to a PDF file.

    Does your scanner work without using Acrobat? If not, you should go to HP's web site and see if there is a Windows 7 driver for your scanner you can download and install.
    You should also update Acrobat to 9.3.

  • Touch screen not working after installing windows 8.1 hp pavilion ts 15-n200se laptop

    touch screen keybord is comming but touch screen is not working no responses...plz help me

    Hi @jewaxen 
    Welcome to the HP Forums!
    It is a fantastic  place to find answers and information!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp that your touchscreen is not responding.
    Was there any changes made before this issue occurred?
    Have you checked for viruses or malware?  Microsoft Malicious Software Removal Tool
    Have you ran the  HP Support Assistant   to aid with HP updates and resolving issues?
    Have you tried using Using automated troubleshooting (Windows 8)
    Here is a link to Troubleshooting touch screen issues in Windows 8 that will guide you through some steps.
    If after completing  the steps in the above link the issue remains, I suggest contacting HP support for further assistance.
    Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
    World Wide Phone Support
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • RDP not working after installing Windows 2008 R2 Service Pack 1

    Hi,
    We have Windows 2008 R2 Data center editions with Service Pack 1 which we recently implemented. Now when i create new virtual machine in Hyper-V with Windows 2008 R2 Standard edition without Service Pack then i can able to take RDP of virtual server. But
    when i install Service Pack 1 on Windows 2008 R2 Standard edition (Virtual Machine) then i can't able to take RDP.
    By using local administrator i can take remote desktop but using domain administrator i can't take remote desktop. Domain Administrator is part of Remote Desktop Users group. I tried to reinstall and uninstall KB2667402.
    Your help is highly appreciated.
    Regards,
    Arjun
    Arjun V.

    Hi Arjun,
    It might happens that it occurs due to some antivirus software. You can try to disable or uninstall the 3rd Party security software in the Windows Server to see whether same issue still exists.
    In addition for your issue, another suggestion to try uninstalling the 2 windows updates and then again re-install the update manually with below link provided and restart the server. After restarting check whether the issue still occurs. You need to uninstall
    & re-install manually below 2 updates:
    1.  KB2667402 – Download Link
    2.  KB2621440 – Download Link
    Hope it helps!
    Thanks.

  • Help please! Keyboard not working after installing windows XP sp3 on T61

    I just changed to windows XP sp3 in last weekend on my T61. From then on, when I turn on the T61 every morning, the key board is not working, sometimes I could not type password. I need reboot several times to make it work. I installed the keyboard customizer utility from some online information, however, it's not helping. I searched the lenovo support website, but there are lots of drivers there,I don't know which to pick. Does anyone had met the similar issue or know how to solve it? Thanks a million!

    I have exactly the same problem. It is not related to docking for me - just regular standby/resume. A reboot solves the problem. Not exactly what you'd expect from a high-end business model. This is the first time in my over 22 years history of using computers that the keyboard fails randomly. Fix this IMIDIATELY Lenovo!
    Message Edited by Chigu on 06-13-2009 12:39 PM

Maybe you are looking for

  • Itunes error 7 Unable to install new version of Itunes on Windows 7

    I am stumped. Have tried to install the latest iTunes download on my PC (Windows7), have tried everything to get it to work. Uninstalled all Apple programs, disabled my anti-virus... so frustrating! Have been trying for a few hours and do not know wh

  • Clicking on Mail message causes all text in window to vanish

    I've searched for anyone reporting a similar issue and couldn't find anything, so my apologies if this has been reported elsewhere. I'm having an intermittent issue where clicking on, for example, an attachment in a Mail message causes the contents o

  • Quick question about mail

    sorry i'm not sure where to ask this question... when you use the search function in mail, it may bring you to messages in the middle of all your emails. is there a hot key that can zip you all the way up to the top without using the mouse? thank you

  • Appstore in mac osx maverick say "Error Conexion"

    I want update some applications and AppStore say "Error Conexion"  when try connect to appStore. My user and my password are correct. I use this data in iPhone and Icloud.com and works

  • Another missing RAW Preview problem....

    I have CS4, on Windows 7 64-bit, and was using Bridge5.5...  EVERYTHING worked fine EXCEPT that Lightroom 2.6 complained when going to CS4 that it didn't like 5.5 and wanted 5.6.  I checked but there didn't appear to be an "installation kit" for 5.6