USB Stick disappeared out of finder and isn't recognised anymore

How can I get the finder recognising the usb stick again?

What happens when you plug it in?
After it's plugged in, in a terminal enter
ls -al /volumes
and see if it shows up.
The other entries should be your internal HD, any other external drives connected and any Windows partitions, if you are using bootcamp.

Similar Messages

  • IPhone is overheated, out of battery and isn't charging.

    My iphone started overheating yesterday randomly whilst I was texting and after a while the temperature screen tell me to wait for it to calm down came along.
    I waited an hour or so and it was fine then continued to charge it. But now my phones out of battery and I've put it in the charger and it goes really hot and says its charging but still hasn't turned on after 4-5 or so hours and looks as if it hasn't made any progress.

    When you say, "Forced restart", do you mean holding the Home and Lock button together?  If not, try that.  If so, then sorry, I can't think of anything else.  You might need a trip to an Apple Store/Reseller, or call AppleCare (if you have it).

  • My USB Stick(Thumb Drive) not Supported and Anothe...

    I have 8Gig Patriot Thumb drive. I used OTG USB cable to connect it to my N8 but phone says USB Device is not supported. ALso When I try to connect my Iomega External Hard drive I get the same error.  Can this be possible? Cause patriot and iomega is very well known company in hard drive and thumb drive. I would be very surprise if N8 doesn't support their products.
    So can anyone confirmed for me that  those companies simply not supported in N8 or I am getting at error which I am not suppose to.
    Also there is one more thing, I usually have around 8.9gig left in internal memory. Whenever I try to move 6 gig Mkv files to internal drive I am keep getting error that there isn't enough memory left. Then I tried with my 16gig microsd card. It had 14.9 gig memory left and I tried to copy 6.9 gig Mkv file to microsd card. I got the same error. So can any help please?
    Thanks

    rajnikant90 wrote:
    Also there is one more thing, I usually have around 8.9gig left in internal memory. Whenever I try to move 6 gig Mkv files to internal drive I am keep getting error that there isn't enough memory left. Then I tried with my 16gig microsd card. It had 14.9 gig memory left and I tried to copy 6.9 gig Mkv file to microsd card. I got the same error. So can any help please?
    Not a computer engineer but isn't this like using a PC with less than 10% free space, it all becomes unworkable. For internal memory doesn't it have to allocate 6GB first leaving it less than 3GB to actually carry out the task?
    Happy to have helped forum with a Support Ratio = 42.5

  • Downloads disappeared from dock, finder, and applications

    macbook pro, osx ver 10.9.5   
    the downloads icon disappeared from dock, from applications, and gone in finder.  one day it was there, the next it was gone.
    i made a new folder and put it in dock and added it to finder, but my downloads are not going into the file even though that's where i direct it to go.
    where did the original go and how can i get it back.?
    thank you.

    while in Finder right-mouse click on the Downloads folder and select Add to Dock

  • I accidentally erased my segate external hard drive out of finder, and I do not know how to get it back!

    I was playing around with finder this evening and I dragged 'segate' out from under devices to my desktop and it popped and made the trash sound. It is not in my trash bin and I unplugged the hard drive and plugged it back in again and still does not show up on finder.I can no longer back up my files because it wont read the segate but still pops up in disk utility. How do I add it back to finder?

    I tried that and it still does not pop up or allow me to back up to the computer but the light is turned on for the hard drive

  • HT1657 I had downloaded a rental but it disappeared from my iPad and isn't on my laptop. The time to watch it has not expired. What am I to do?

    I originally put the rental on my ipad. While on vacation I decided to view it on my laptop (with a bigger screen). At the time, I had no internet access. When I attached my ipad to my laptop (wired) I clicked to view on computer and a sign poped up and said I could not connect to the itune store so it could not be transfered. It was then my movie disappeared!  I'm back home and have internet connection but there is no record of my rental anywhere I can find. What can I do to retrieve my movie?  THe time to view it has not expired yet.

    Everything should be on your computer.  Sync it back.
    You should ahve been syncing contacts and calendars to your computer all along. 
    Did you fail to make sure that everything was on your computer before updating?

  • IPod won't charge and isn't recognised by PC after using Updater

    Hi, I've had various problems with my 60GB iPod colour since I bought it last summer.
    Up until now all my issues have been solved on this forum, however I can't find any answers on this one.
    So, here goes:
    my iPod hasn't been charging from my adapter for some time now. There's nothing wrong with the adapter as my wife also has an iPod and both chargers (hers & mine) work fine on hers.
    My iPod did charge through my usb 2.0 cable so I was quite happy.
    However, I updated my iPod software using the iPod updater but now my iPod is stuck with the adapter - wall socket picture on it.
    My laptop doesn't recognise it & re-setting doesn't work.
    Can anyone help?

    yes my colleague had a similar problem. If this is the updater dated 5/1/06 DO NOT USE IT. It is full of bugs and never should been made available IMO. Grab yourself the previous updater. 12/10/05 and restore the ipod. It should be ok then. Needless to say you will lose all the tunes so should check they are in your itunes library

  • HT204370 I rented a movie, but it gets two minutes in and quits and isn't uploading anymore. What can I do to watch the film I've purchased which expires in 23 hours now?

    I ws wondering if there is some way to trouble shoot this problem. I don't want to lose the money spent on renting the film and not being able to watch it, and don't want to spend more money trying to rent it again. Is there anything I can do? It's just stopped and not downloading any further.

    Having the same problem. Watched 25 minutes of a rental and it stopped with the message"unable to load video"
    Using current version IPad mini.
    Ios7 is  HUGH PIECE OF CRAP!!!!

  • How do I format a USB stick on my iMac

    I am a recent mover to OSX and need to reformat a simple usb stick. I tried finder and could not figure it out.

    Drive Preparation
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

  • Mac says usb stick is full when it isn't

    I'm trying to copy files to a usb stick but my mac keeps telling me the stick is full, even when I know it isn't. Deleting other files on the usb stick doesn't help at all. I've tried a few different sticks - sometimes I can get it to work but eventually it decides the usb stick is full even when it isn't and even if I delete all the other data off it, and then it won't copy.

    Hi and welcome to  Discussions.
    Just remember, after you delete something you'll need to empty the trash to recover the space, and for the USB stick it will need to be attached whilst that recovery takes place.
    Message was rephrased by: roam

  • External HD Disappeared on Finder and Disk Utility, but Still Appeared in System Report

    I have two external HDs directly connected to the USB ports. One is working properfly. But the other one would disappear from the Finder and Disk Utility. However, it still shows up in the Hardware USB section of the Sysetm Report.
    What does this mean? Thanks.

    You are right. I need to select the device to show its details. The attached screenshots are from the good HD and bad HD. On the good HD, it shows more info.
    Any explanation or suggestion? I contacted OWC and they are sending me a replacement. But how do I know it is a OWC HD issue or OS X 10.9.3 sleep issue?

  • How do I use a USB stick (SafeStick) with my MacBook Pro

    I have an encrypted USB stick for use with Windows and SNow Leopard.  When I upgraded to Lion is stopped working on my Mac.  Any ideas please?
    THansk
    Ian

    Did you ever find out what to do, this has happened to me too.  Apple support could not help as the machine was not recognising the safestick.
    Also I am concerned that even if I fix it then the person I want to give it to will also have the same problem.
    regards Ro

  • How do I block an account on a USB stick?

    My daughter has created a new account on a USB stick (which I cannot find!) that overrides all the passwords and security checks for her account.  She has named it, and uses it when I am at work.  I have no idea how to stop this and although I have changed the passwords an all our family accounts to one she CANNOT guess, she obviously is able to gain access to the computer with the USB stick.  I have no idea where to begin!  The account shows as  "[son's name]'s iMac" and it has Administrators priviledges (although I have changed his settings back to "managed" in the Users & Groups pane, this makes no difference), my son is at University and therefore does not live with us and has not given her permission to use his account.  This has been going on now for three months and I'm sick of her downloading rubbish onto my computer but more importantly it means she is coming back downstairs to log back on until 2 am on a school night when we're all asleep!  Can someone please help me with blocking this account?  I'd be very grateful!!   

    Insert the stick.
    Wait for it to appear on the Desktop.
    Drag your files to it.
    Wait for the copying to complete.
    Drag the icon of the drive to the Trash.
    Do not remove the stick until the icon has disappeared from the Desktop.
    There are backup programs available which will make the process easier by using 'incremental backups' which copy over and update only changed files.

  • Trouble opening Jar from USB stick on a Mac

    Hi all,
    Has anyone else had any problems running Jar files from a USB stick on a Mac -- directly clicking on them in the finder?
    What I've found:
    - I cannot run any Jar file I try if it is on a USB stick and I double-click on the jar file in my Mac
    - I CAN run jar files from a CD by double-clicking
    - I CAN run jar files from USB sticks on Windows directly from the window
    - I CAN run jar files from a USB stick on a mac if I call "java -jar" directly from the terminal
    I have tried running from USB sticks on several different Macs, and I've tried a number of different Jars that I've created over the years -- nothing works. The Java code isn't doing any path-based finding of files or anything like that.
    Anyone else tried this? Are there any solutions?
    Thanks,
    Sam

    Try this:
    With the stick plugged in, go to Finder->Applications->Utilities->Disk Utility.  From there, you should see your memory stick appear in a sidebar on the left.  Click on it, then click on the "erase" tab and follow the instructions.

  • How can I keep bootable partitions from showing when I want to use my usb stick without the option command at boot up?

    Im using a usb stick with bootable diagnostic partitions and a extra partition for diags that run in the OS. When i want to use diagnostics from this extra partition on a mac thats already booted, I have to wait for all the bootable partitions to mount as well as the one partition that I need. Is there a way to hide these bootable partitions when using the usb drive as a storage device to run diags in the OS?
    Thanks

    I think I may have to look into a redirect line in my htaccess file so that direct loads of my mp3's route through my website page.
    If you do this you may find iTunes won't read the files, so I should test carefully on one file first if possible.

Maybe you are looking for

  • How to turn off default attribute "Validity" in a web-report

    Hi Experts, We are using 0ORGUNIT with time-dependent hierarchy. This hierarchy is included in most of our reports. When we run a report with 0ORGUNIT hierarchy an attribute "Validity" is always shown next to the hierarchy. We can manually remove thi

  • Monthly wise Sales report - Help me

    Dear SDN mates Is there any standard reports for Monthly wise sales report ...the SAP1 , SAP2 reports were not helpful....Does this can be solved by standard reports or it needs to be customized???? kindly help me?

  • How can I correctly import images to Lightroom?

    Before installing Adobe Creative Cloud, I deleted Adobe Elements and all files in My Pictures on my hard drive so I could start fresh. I copied groups of images from CS5 Bridge on my old pc onto an empty flashdrive and tried to import them to Lightro

  • SQL Server 2012 Linked server

    We have created a linked server in SQL 2012. Using this we are able to access tables,procs and functions. But we are not able to access functions using dynamic values

  • How can i use GZip combined with NIO?

    Hi All, I have a nio client that connects a client (HTTP) and request something. I need my client to Accept-Encoding: gzip - but how will i be able to read the data into my ByteBuffer? I don't have a problem reading, cause it's bytes after all, but i