USB Superdrive issues with tracks beyond number 20

I bought an USB Superdrive for my Retina iMac. Now i can't transfer tracks beyond number 20 in to my iTunes. Let me explain, tracks 1 to 19 seems to transfer properly till it arrives to track number 20 then the transfer-procedure stops. I've tried with two CD and experienced the same problem. Not only the transfer to my iTunes is impossible, it is also impossible to play tracks. The CD's are fitness-CD if this matters to find the problem.
Does someone has an idea, what this could be? Thanks for helping out!

Similar Messages

Will a USB SuperDrive work with my Mac Book Pro?

Will a USB Superdrive work with my mac booc pro?

lorifromgermany,
if you have a non-Retina MacBook Pro, the following command could allow a USB SuperDrive to work with it.
Log in as an administrative user, open Terminal, run the following command within Terminal, close Terminal, and then restart your MacBook Pro:
sudo nvram boot-args="mbasd=1"
(When it asks you for a password, enter the administrative user’s password.)

Premiere Elements 7 issue with track 1

I just recently switched to premier elements 7. When I first switched it was fine, but now when I bring video into the timeline it always creates new Tracks and will not allow me to put it into Track 1. No idea why this is happening and it's not the end of the world, except when things are put in automatically they are put onto Track 1, and I can't even move my video from Track 2 to Track 1. My computer is Vista home premium. Any help would be appreciated!

Hmm. I see that this is a dual-format cam that will also record in MPEG2.
How are you getting this MPEG into your computer? Are you using Premiere Elements' Media Downloader to pull it off your hard drive?
Also, for this video you should be using the project preset for hard drive or DVD camcorders.
I'm not an expert on these dual-format camcorders, so there could be an issue with it using 5.1 audio, if it is for those MPEG. That could lead to the problems you're describing.

Goods issue with blocked serial number

Hi All,
I have the following issue:
I use serial numbers in the delivery, this is mandatory, if the material has a mandatory serial number profile in the material master.
In the delivery its possible to select for a free material a serial number that's blocked (stock type 07 Blocked stock) the system accepts that. This should not happen.
Does somebody know how to solve this issue
Thanks!

Hi,
Receive again with correct item code and ware house with same serial number.
If not, Please explain with an example.
Thanks & Regards,
Nagarajan

Is the USB Superdrive compatible with Windows?

Hi all,
I have a Retina MacBook Pro and needed to install Windows today (using Paralells but I'm not sure this matters in this case).
I went to a Mac shop and was about to buy a USB Superdrive before the assistant assured me that Apple has totally locked down the firmware so it won't work with Windows.
I find this to be unlikely, considering OSX ships with Bootcamp with the intention of people running Windows it seems bizarre that Apple expect these folks to go without a CD drive.
Can anyone shed any light on this please?
Thanks

Hmm, in that case I may need to consult with the Paralells guys as that is what I would be using in this instance. I wonder if it works with a straight up Windows machine.
Thanks

Issue with getting sequance number from db in EO for a primary key column

Hello Experts,
we are working on ADf 11.1.1.2.
we are facing issue with sequence number in our UAT instance.
dev instance and sit instances did not gave any issues.
We have one EO in that for one attribute we have given the value as
new oracle.jbo.server.SequenceImpl("XXOZF_QA_CODE_S", object.getDBTransaction())).getSequenceNumber()
in order to get the primary key column value from db sequance .
<TransientExpression><![CDATA[(
new oracle.jbo.server.SequenceImpl("XXOZF_QA_CODE_S", object.getDBTransaction())).getSequenceNumber()
]]></TransientExpression>
now the issue is "I have incremented the sequence number through SQL plus from 10 to 20. And created a record on a VO which is based on above EO.
But the sequence iam getting is 11 instead of 21."
This is happening only in our uat instance all other instances are working fine.
Can any one tell us how this frame work is still pointing tho the old sequnce number.
regards
Gayaz

Also make sure that your sequence has NOCYCLE option.
some thing like this:
CREATE SEQUENCE test_seq
START WITH 1
INCREMENT BY 1
NOCACHE
NOCYCLE;

USB drive issues with Maverick

Good day Apple friends,
Since I installed Maverick I have numerous issues with my Macbook Pro-Retina mid 2012.
When I connect my usual USB drives they don't react the first time. I always have to deconnect and immediately reconnect to make it work.
It is not a question of delay, it is a question of 1st or 2nd time. I basically go: connect, disconnect, reconnect and voilà!
It happens with many 2-4-8 GB USB sticks which were fine before Maverick. It does NOT happen with SD cards though.
Why?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Applied SP 13 but now have issues with Track deploy

We recently applied SP 13 to NWDI (we were at SP10).
I re-imported my track into NWDS, made a change to code and activated it.
The track was configured to allow auto-deploy to dev runtime.
While the activation resulted in a successful build by CBS (I checked CBS log) the application was not deployed to the dev runtime.
I had no issue with this before applying SP 13.
Any ideas?

Dean,
Go to the Landscape configurator in the CMS (http://<hostname>:<port>/devinf/ ).
Click on the track that is affected and then click on the Runtime Systems tab.
Is the "Disable automatic deployment" checked? If so, uncheck it.
Next, take a look at the build request queue, you may have some entries pending.
http://<hostname>:<port>/TCS/Deployer
HTH!

Does the apple usb superdrive work with an imac?

I have a new iMac and was surprised I couldn't burn a cd because there is no disc drive! Can the Apple USB Superdrive be used with the iMac? The product details do not mention compatability with an iMac, only MacBook Pro & Mac Mini.

According to http://www.apple.com/mac/compare/ it's compatible wtih the new iMacs.

Sporadic USB drive issue with Mini -- iPhoto can't save, can't eject

I recently bought an Ultra stackable USB enclosure and a 1 G WD SATA drive. The drive formatted ok and I was able to move 500 gigs worth of media onto it. So far so good.
Now, sporadically iPhoto and iBank (possibly others too, but I haven't kept track) complain that they can't save their data. They can open it but they can't save it. Running "Verify and Repair" from disk utility yields nothing. Rebooting and running the disk utility yields nothing either.
When that happens I close all the apps and try ejecting it. Finder says the drive is in use and cannot be ejected. "lsof" output from terminal yields nothing. Only thing that helps is either a reboot or "hidutil eject -force" followed by remounting the drive using the Disk Utility.
After that all is well for another 2 days or so and the problem surfaces up again. I am dumbfounded as to why this happens. The drive seems ok, everything seems normal, so I am lost.
Any thoughts before I call AppleCare with this ?

No, I eliminated that problem by connecting directly.
I noticed that I may have accidentally placed a shortcut to "Macintosh HD" on that drive. It is possible that ejection issues could've been caused by that, i.e. "Macintosh HD" is always in use. Perhaps that was my problem ? I deleted the shortcut, we'll report what happens.

Having some major issues with track numbers in the newest iTunes

I just recently went out and bought some new albums today for my birthday which was over the weekend and I ripped them to my computer, but when I go to put them into iTunes their track numbers are wrong. So as normal I went to change them, but found that when I click in the track number box I cannot input any numbers what so ever. I went and checked to see if the file was a read only file and it wasn't and I don't have any restrictions on this laptop so I'm not sure of what to do. Before I updated to 10.6.1 I was able to change anything and everything in the get info tab now I can only change the track name, album name, and artist. Any ideas?

If you can click in the track number box, but get no numbers to appear, then I'd suspect you've got shift lock or num lock in the wrong position. If the box is greyed out, or you can enter new details but they are not saved, then I'd be looking for a permissions issue.
tt2

2 iPhone Household w/ Outlook Profile Sync Issues with iTunes beyond 7.3.1

I’m huge Apple supporter and have to say this is the most frustrating computer issue I have ever come across. My wife and I both have iPhones and we sync them to the same pc except different Outlook profiles. iTunes 7.3.1 works fine when we sync our iPhones on each of out Outlook profiles, anything beyond 7.3.1 will automatically sync my contacts and calendar directly to her phone. It’s as if iTunes cannot distinguish between the two outlook profiles on the newer iTunes versions. I have tried both Outlook 2003 and 2007 with newer iTunes, and it's still not able to distinguish the two profiles.
Any would be greatly appreciated.

i have a similar problem, having one good and one bad outlook profile. Used to sync just fine against the good one (which is called 'new profile). new version is defaulting against the bad one, which has none of my contacts...
where does one setup which named profile is to be used?
thank you! any help appreciated!

Issue with Oracle.sql.NUMBER in Java Stored Procedure

When we try to make a call to the Oracle.sql.NUMBER(String) inside a java stored procedure and pass values from '01' to '09', it throws java.lang.StringIndexOutOfBoundsException: String index out of range: 3
We use Oracle 9.2.0.6 - JServer Release 9.2.0.6.0.
It works fine for other values. Please find below the code used for simulating the issue outside the application. Thanks.
create or replace and compile java source named testNumber as
import oracle.sql.NUMBER;
import java.sql.SQLException;
public class TestNumber
       public static String convertNumber(String parm) {
                 NUMBER nTest;
                 try {
                         nTest = new NUMBER(parm);
                         return "TRUE";
                 }catch (SQLException sqle) {
                         return "FALSE";
create or replace function test_number (p_str in varchar2) return varchar2 as
language Java name 'TestNumber.convertNumber(java.lang.String) return
java.lang.String';
select test_number('05') from dual; - Throws exception ORA-29532: Java call terminated by uncaught Java exception: java.lang.StringIndexOutOfBoundsException: String index out of range: 3
select test_number('5') from dual; - Works fine
select test_number('010') from dual; - Works fine

Siva,
I'm only guessing, but it could be an Oracle bug, in which case I suggest checking with Oracle Support.
(You do have a support contract, don't you? ;-)
Did you try compiling and running your java class "TestNumber" outside the database?
Class "oracle.sql.NUMBER" should be in Oracle's JDBC driver, I believe.
Good Luck,
Avi.

Issue with fixed point number output from 9219 module for full bridge measurement (cRIO/FPGA)

Hi,
I have a question regarding the fixed point output acquired from a 9219 module (in FPGA on a cRIO) when setup to acquire a strain measurement (full bridge).
Software: Labview 2009
Hardware: cRIO-9012 (NI-RIO 3.2.1), NI-9219 module
The 9219 module is configured in the project as follow:
Ch0: Full-Bridge +/- 7.8mV/V
Ch1: Voltage +/- 4V
Ch2: Voltage +/- 15V
Ch3: Voltage +/- 60V
The calibration mode is 'Calibrated' so the FPGA outputs fixed point numbers.
My issue is that the precision of the fixed point number for Ch0 (strain) is "(fixed point <+/-32,-1>[-2.5e1,2.5e1]:1.16e-10)", which indicates that the fixed point number is a value between +/- 0.25 and not the +7.8mV/V as I expected?
The fixed point number does not change in precision whether the range for the strain measurement is set at +/- 7.8mV/V or +/-64mV/V (the two available options).
As the fixed point number doesn't change precision I'm assuming that changing the range of the strain measurement changes the resolution of the acquired number? And as such I will need to perform additional scaling on the fixed point number to convert it to the expected range?
There is no mention of scaling of the voltage or strain measurements mentioned in any documentation or examples, with the only scaling example provided for the thermocouple measurements.
Any help/clarification is much appreciated.
Regards,
Mike

Hello Mike,
Hopefully I can help clarify some of the behavior you are seeing.
My issue is that the precision of the fixed point number for Ch0 (strain) is "(fixed point <+/-32,-1>[-2.5e1,2.5e1]:1.16e-10)", which indicates that the fixed point number is a value between +/- 0.25 and not the +7.8mV/V as I expected?
For calibrated values on the FPGA VI, the returned data is a Voltage measurement, not a directly calculated strain value. Based on the specified ranges for the 9219 in a Full bridge configuration, 250 mV will encompass all possible input values, at the module provided excitation (2-2.7V dependent on the sensor gage resistance).
The fixed point number does not change in precision whether the range for the strain measurement is set at +/- 7.8mV/V or +/-64mV/V (the two available options).
As you may notice from the fix-point definition, the fixed point data contains 32-bit precision which is larger than the acquired precision of 24-bits provided by the 9219. The fixed point data-type is coded to accept input encompassing both the range and precision of the instrument; such that, no additional coercion of the input data values is required based on user-defined software settings, i.e. the bridge sensitivities +/- 7.8mV/V or +/-64mV/V.
As the fixed point number doesn't change precision I'm assuming that changing the range of the strain measurement changes the resolution of the acquired number? And as such I will need to perform additional scaling on the fixed point number to convert it to the expected range?
The documentation does not clearly define that by varying the discrete levels of strain input (+/- 7.8mV/V or +/-64mV/V) the range of the ADC on the module is also adjusted. I am working to follow up further on this topic, to provide a clarification on the module documentation. As for scaling, the voltage values acquired regardless of the ADC resolution will still be related strain via the bridge sensitivity. The resolution of the ADC will simply define the smallest measurable change in the strain value.
There is no mention of scaling of the voltage or strain measurements mentioned in any documentation or examples, with the only scaling example provided for the thermocouple measurements.
For converting the acquired voltage values to a strain measurement, I would recommend the documentation linked here for a detailed explanation on strain calculation. Often, users will forward the acquired voltage data as fixed point values through a DMA FIFO to the RT controller on the Compact RIO; such that, they may handle conversion from voltage to strain using floating point math in real-time.
I hopes these responses provided a bit of clarity. I will continue to work to provide additional information on the 9219 specification information. Please post back any further questions.
Cheers!
Edit: Forgot to add the link.
Message Edited by Pcorcs on 04-14-2010 04:55 PM
Patrick Corcoran
Application Engineering Specialist | Control
National Instruments

Issues with Tracks in Music

Ever since I did the update to iOS 6, I am having issues while playing music. I start playing music on my iPhone, let's say at track #45. I continue to play it to track #83 and stop playing music. When I go to return to the music, it has reverted to track #45. I have done a complete factory reset of the iPhone and started from scratch, but still have the issue. Anyone else have this issue? Any suggestions for a fix?

Thanks for your reply.
Here's a screenshot. If you can read it you'll see it's album by artist view, except that it isn't.
Rautavaara, album name, has a variety of tracks on it that shouldn't be there, all from other albums. If I go to 'Modern Classical', the playlist I created, Rautavvara is there as it should be, with its 3 tracks on it.
All the albums that are mixed up like this, with completely the wrong tracks on them, are ones on which I attempted unsucessfully to paste album artwork, JPEG format, from google images.
Do you think this might have corrupted the iTunes files or actually the music itself?

USB Superdrive issues with tracks beyond number 20

Similar Messages

Maybe you are looking for