USB superdrive not working with Mac Pro

Is there a trick to getting a USB Superdrive working with a Macpro?
The drive in the Macpro no longer ejects and have tried connecting the USB drive to both the front and back ports - does it not work with Mac Pros?
Any pointers in the right direction would be much appreciated.

I had a problem my superdrive. It would play dvd's and cd's that were already burnt but would not burn blank DVDs or CDs- in the recent past it had no problems burning. In addition, the Finder would not display the superdrive. When I put a blank disc in it would go to Disk Utilities and would not allow burning. With help from Apple I discovered the problem-- The settings in CDS & DVDs had been changed from When you insert a blank DVD/CD "Ask what to do to to "GO to Disk Utilities". If this sounds like your problem try changing the settings to this:
Try going to; System Preferences/ CDs & DVDs
Change these two settings to this:
When you insert a blank CD: Ask what to do
When you insert a blank DVD: Ask what to do
NOTE: If they are already set to this you probably have a different problem. If they are set to Go to Disk Utilitiy this is probably a solution.
And
Then go to Finder Preferences
Make sure that under "Show these items on desktop:" that the checkbox for CDs, DVDs, and iPods is checked.
Try to burn the DVD again (reload Disc- perhaps restart) and try again.
Don't know how these setting changed but they did. It worked for me.
Message was edited by: pj176

Similar Messages

USB Mouse not work with Mac OS 10.6

I have a USB mouse can work with Mac OS 10.4 but cannot with Mac OS 10.6. Noticed the different is the USB mouse motion reporting is 12-bit instead of 8-bit. It can definitely work on Windows with standard USB HID driver. I wonder if the OS 10.6 is having a different USB HID driver specification which is not posted in USB-IF.

Ask the Vendor.

My canon EOS DIGITAL ver 24.0 in not working with mac pro os x

MY CANON EOS DIGITAL SOFTWARE VER 24.0 IS NOT WORKING WITH THIS VERSION OF MAC OS X

Atiya wrote:
I have a Mac Pro (2 x 2.4 GHz Quad-Core, model identifier MacPro5,1) purchased in late 2010 and a 24" LED Cinema Display. The Mac Pro has three video ports--a full-sized DVI and two mini DVI. When I plug the Cinema Display into either of the mini DVI ports, I cannot get a picture, although the iSight camera works fine. If I plug another monitor into the full-sized DVI port the computer believes that is the only monitor. The Cinema Display works fine with my MacBook, so there is nothing physically wrong with it.
Is it not possible to use this monitor with a Mac Pro without an adapter, even though the Mac Pro does have mini DVI ports?
I use a 24" LED with my Mac Pro. Works a treat!
Does this help you? http://support.apple.com/kb/TS2400
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.6); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.6)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

Seagate Backup Plus Slim External USB 3 Hard Drive Not Working with Mac Pro

Hi, I have just purchased a brand new Mac Pro. I have three 2 TB Seagate Backup Plus Slim External USB 3 hard drives that just don't jive with the new Mac Pro's. When the drive is connected, I cannot access the drive, read/write or even format. Finder completely locks up and the drive cannot even be force ejected. When I try to format, Disk Utility either spits out an error that the drive cannot be read, or simply locks up. This happens regardless of the OS on the Mac Pro. I am currently running 10.10.2
I have ruled out an issues with the drives, as I have tested all of them on a variety of systems and OS's, including Power Mac, Mac Book Pro, PC, OS 10.7, 10.8, 10.9 as well as on Windows. I have tried formatting in every file system including Mac OS Extended, Mac OS Extended (Journaled), NTFS and exFAT. ALL other systems have no issues with the drives. Apple has replaced my Mac Pro with a brand new one and the drives still behave the same way. Furthermore, I have tested the drives on three other Mac Pro's at work and they all reject the drives. So, on their own, there is nothing wrong with the Mac Pro, or the drives. However, the configuration of them together is wreaking havoc.
I have contacted Seagate, and this was their response:
The most recent version of the Backup Plus drives use the USB Attached SCSI (UAS) standard to increase transfer rates. It's possible that the drivers being used currently on your Mac Pro are having issues using this feature with the standard USB 3.0 drivers installed. I would recommend contacting Apple to check for any driver updates or see if they any suggestions for issues involving drives using UAS.
I have also started a case with Apple Support (Case # 755934373) and am waiting to hear back regarding Seagate's response. I've spent DAYS trying to troubleshoot this and am now at a complete loss. If anyone has any ideas, I'm all ears (or eyes in this case).
Thanks!

Hi danielsh6,
I recently bought the new Lacie Thunderbolt 2 D2 3TB and I had the same problem as you, i have a macbook pro early 2011, those support thunderbolt but many times there is a bug that doesn't let you connect any thunderbolt drives to your computer. The solution I found was installing this update:
Thunderbolt Firmware Update v1.0
Before doing this I would recommend you updating to mountain lion (not yosemite yet as there is still some glitches and more on preview's macbook pro's).
Hope this helped!
Forest

Usb mike not working with mac mini

Hi,
I bought a samson CO1U usb connection mike to use with the mac mini as there is no mike connection. The device is recognised by the computer but apparently not by i-movies or Quicktime Pro 7 as when I bring up the audio screen nothing registers in the sound level and obviously nothing records - am I doing something wrong or missing something out or is this device just not compatible? Apple help were no help!
Hope someone can be of assistance in this matter as I need to record a voiceover on to an animation video.
cheers, shadwell

Hi, thanks for your reply - did that but still no joy.
In utilities / audio midi it says output ( and input ) not supported and in system preferences/sound the input level is registering nothing.I'm going to try the mike on a friend's laptop to see if it is a problem with the mike or the mini mac - or maybe I'm just making some simple mistake in setting it up in Quicktime.Do you know if any usb recording devices actually do work with the mini mac?
thanks, shadwell

New Display Not Working With Mac Pro

I just ordered a new Mac Pro and 24-inch Cinema Display. About 15 minutes ago I plugged everything in and turned it on. Nothing. The screen is blank.
I made sure everything (power cord, Mini Display Port) was plugged in. Still nothing.
What can I do?

Pardon me if you see this in other places - the problem drove me crazy, and I've read about it all over the place but could not find a definite fix.
I'm using the 24" LED Cinema Display with my new MBP 17 and had the same problem: plug in the monitor's mini DisplayPort and nothing. Sound worked, and my attached USB peripherals (keyboard and mouse) worked fine, but there was no display.
Reboot doesn't fix it. Zapping PRAM doesn't fix it. Reconnecting the DisplayPort doesn't work.
I figured out quickly I had to follow these instructions when using it in "clamshell" mode..
http://support.apple.com/kb/HT3131
But that isn't going to apply to your Pro. But somewhere - sorry, I would reference it but can no longer find where I got the suggestion - someone gave me the idea to try deleting preferences files until something changed.
Luckily, I got it on the first try..
Macintosh HD -> Library -> Preferences -> SystemConfiguration
..and move or delete the com.apple.PowerManagement.plist file.
I plugged the monitor back in and it worked INSTANTLY, like a charm.
There must be a bug somewhere. I swear it worked better in Leopard and started in Snow Leopard, but there seem to be other people reporting the same or a very similar problem on Leopard as well.

USB Interface Not Working With Logic Pro 9

Hello,
I've had a Tascam US-1641 for several years now with absolutely zero issues on my old PC. Ever since I upgraded to Mac (early 2011 17 inch Macbook Pro running Snow Leopard) I've had nothing but problems with the US-1641. No matter how many times I uninstall-reinstall the drivers and what USB port I plug it into, whenever I turn on the device and it's connected to my Macbook, it crashes my operating system and it freezes everything I was doing. Logic Pro doesn't load and when it sometimes does (10 minutes later), it immediately crashes when I click anything.
I've tried several tips to fix it and nothing worked. The most popular choice was select the default input/output in Logic to the system audio, then quit Logic, turn on the interface, then restart Logic. No such luck. I have to reboot my machine at least 5 times, uninstall/reinstall the driver and hope it works to use the interface. I thought it was the operating system, so I upgraded to Mountain Lion and installed the new driver for Mountain Lion, after of course deleting the other drivers and removing all previous data, and it is still giving me the same problems.
I don't have the money to afford a replacement model or a different interface from a different company, so I'm hoping you guys can help me figure out what exactly it is that's causing the interface to freeze my operating system and crashing my Mac whenever I try to use it. I am getting extremely frustrated at this and as much as I love OSX and Logic, what good is this piece of software if I can't use it? I need help.
Thank you.

The problem lies with Tascam and their inability to write stable drivers for OS X... and isn't anything to do with Logic Pro ..
As you know, you are not the only person to have had this issue and the reality is, while the 1641 might work fine with Windows, when it comes to OS X Macs.. it's an entirely different story... depending on the version of OS XS you are running.
The one tip I have read, that seemed to fix it for most people.. (Though not all) is as follows;
(Thanks to Paulypaulpaul for this)
-uninstall your tascam driver 2.10
-restart
-install driver 1.03
-restart
-plug in your tascam
-goto where you download your drivers (http://tascam.com/product/us-1641/downloads/), scroll down to the bottom where it says firmware, Download the firmware 1.02 (3rd from top under firmware), install it. your control panal should now read 1.03 for your drivers and 1.02 for your firmware.
-install drivers 2.10
-restart
Follow each of the steps exactly.. including all restarts when indicated..
...and good luck...

External iSight microphone not working with Mac Pro

i have researched this extensively to no avail.
i have an external iSight camera plugged into a pci express firewire port (i got one hoping to solve the problem). the camera works fine except for the mic. it shows up in audio inputs in system preferences but will not produce sound.
i have troubleshot it by plugging it into a Powerbook G4 and the mic worked perfectly. i have also tried different firewire cables and plugged the iSight into the firewire ports on the machine.
does anyone know if there are know bugs with leopard and external iSight...seems so weird that it would work on a G4 and not my Mac Pro.
any insight or help would be greatly appreciated!

Welcome to  Discussions, bigboi78
I do not have an iNtel Mac, but external iSight, including its mic, work fine on my 10.5.6 G5 DP tower.
As I understand, you have checked System Preferences, found external iSight as a Sound > Input device, and selected iSight's Mic. However, adjusting the "Input volume:" slider there while you make some sounds does not effect the fact that the "Input level:" digital VU meter there never flickers regardless of input volume setting.
I also understand that you used the same Firewire cable with your external iSight on both Macs, so we can eliminate a possible cable problem.
If my understanding is correct, I can think of two possibilities that may give you a fix before you seek help from an Apple Authorized Service Provider (AASP.)
(1) Be sure to test with ALL other Firewire devices disconnected to avoid Possible Hardware or Software Conflicts with iSight. If you have any untested third party iSight or AV software, you might even consider whether that could be causing a conflict.
(2) Applying the latest Combo Updater often solves strange problems. Do it this way:
• Download http://support.apple.com/downloads/MacOS_X_10_5_6_ComboUpdate
but do not install it yet.
• Disconnect all Firewire devices (if not already done) and restart your Mac
• Repair permissions
• Apply the 10.5.6 Combo Updater
• Immediately after the restart that finishes the update, repair permissions again
• Reconnect iSight (only) to test whether the problem is solved
• If so, reconnect your other Firewire devices (if any) one at a time and test again
• If the problem returns when you have multiple FW devices connected,
you need to keep the others disconnected while using iSight's mic.
(3) My only remaining suggestion is to seek help from an AASP.
We will watch for your status update.
EZ Jim
G5 DP 1.8GHz w/Mac OS X (10.5.6) PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

24" LED Cinema Display not working with Mac Pro

I have a Mac Pro (2 x 2.4 GHz Quad-Core, model identifier MacPro5,1) purchased in late 2010 and a 24" LED Cinema Display. The Mac Pro has three video ports--a full-sized DVI and two mini DVI. When I plug the Cinema Display into either of the mini DVI ports, I cannot get a picture, although the iSight camera works fine. If I plug another monitor into the full-sized DVI port the computer believes that is the only monitor. The Cinema Display works fine with my MacBook, so there is nothing physically wrong with it.
Is it not possible to use this monitor with a Mac Pro without an adapter, even though the Mac Pro does have mini DVI ports?

Atiya wrote:
I have a Mac Pro (2 x 2.4 GHz Quad-Core, model identifier MacPro5,1) purchased in late 2010 and a 24" LED Cinema Display. The Mac Pro has three video ports--a full-sized DVI and two mini DVI. When I plug the Cinema Display into either of the mini DVI ports, I cannot get a picture, although the iSight camera works fine. If I plug another monitor into the full-sized DVI port the computer believes that is the only monitor. The Cinema Display works fine with my MacBook, so there is nothing physically wrong with it.
Is it not possible to use this monitor with a Mac Pro without an adapter, even though the Mac Pro does have mini DVI ports?
I use a 24" LED with my Mac Pro. Works a treat!
Does this help you? http://support.apple.com/kb/TS2400
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.6); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.6)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

IMessage and FaceTime not working on Mac Pro and message stating to contact Support came on

iMessage and FaceTime not working on Mac Pro and a message stating to contact Support came on with a verification code. It was working on 8/29 but stopped on 8/30. When I called support to even speak with anyone they wanted $19. I don't want to pay $19 for an Apple problem. I cleared my key chain, also reset my apple ID password but still not working. Works fine on my iPhone.

There is no official public documentation of that error message as far as I know, but according to reports, it can mean (at least sometimes) that the same Apple ID is being used with the iTunes Store or one of the other Apple content stores, and the payment method is invalid. Sign in to the store and review your account. You do not, of course, have to provide any billing information to set up an account to use only with iMessage, as it's a free service.
Otherwise, do what the error message tells you to do. According to reports, you won't be charged for the call if you select "Apple ID" as the product you need support for, and cite the customer code in the alert as the "validation code" to the support representative.

What USB speakerphones do work with mac?

I would like to find a USB speakerphone to work with MAC (really for google's Gizmo5 and/or skype). Not sure where to post this, let me know.
All the high end (around $110) USP speakerphones say they are for Microsoft Office Communicator. So, I talked to Polycom about their cx100, and they said it does not work with Mac.
What USB speakerphones do work with mac? Any recommendations?
thanks
bob

The ClearOne Chat 50 works very well with mac (Gizmo5 and Skype). The box says Windows only, but if you read carefully there web site, they have mac installation software to download.

Teltra Bigpond Ultimate wireless mobile not working On Mac pro

Can Some-one show me what to do as my teltra bigpond ultimate mobile device is not working on Mac pro but work on my other windows. Teltra staff help me and download new software but it is stll not connected to internet. Spent hours on bigpond support and they could not fix it.
Thank you in advance

Try booting in 32-bit kernel mode.
Mac OS X v10.6: Starting up with the 32-bit or 64-bit kernel

Tried to download version 4, which replaced old 3.6, but I'm getting a message that version 4 will not work with Mac OS 10 (I have OS 10.4.11). How can I download previous Firefox version?

Tried to download version 4, which replaced old 3.6, but I'm getting a message that version 4 will not work with Mac OS 10 (I have OS 10.4.11). How can I download previous Firefox version?

You can download firefox 3.6.16 here: http://www.mozilla.com/en-US/firefox/all-older.html

In context not working with Mac Safari 6.04

Hi there just noticed
in context not working with Mac Safari 6.04, you can edit text, and save and publish but editable marquees are no longer visible especially the repeating elements?

Hi Vicki,
I would suggest submitting a support case on this for further investigation.
Unfortunately I'm on a PC machine so I cannot confirm on my end. Please reach out to direct support ASAP if the issue is still existing.
- http://helpx.adobe.com/contact.html
Kind regards,
-Sidney

Lost ical and the ical 1.5.5 is not working with mac osx 10.5 ?

lost ical, would like to download it, as in the installation disk, I'vent the possibility to do it . The problem is that the ical 1.5.5 is not working with mac osx 10.5 ?

biomecasport,
Welcome to Apple Discussions.
1. Insert the Leopard Installation disk into the computer.
2. The disk will appear on the desktop.
3. Double click on the "Optional Installs" folder.
4. Double click on the "Optional Installs.mpkg."
5. Click on (Continue) in Introduction.
6. Click on (Continue) in Software License Agreement.
7. Click on (Agree) to agree to the terms of the software license agreement.
8. Click on the disclosure arrow ▶ next to Applications.
9. Select (✓) iCal.
10. Click (Continue).
11. After iCal has been reinstalled, download and install the Mac OS X 10.5.8 Combo Update to bring iCal up to the most recent version.

USB superdrive not working with Mac Pro

Similar Messages

Maybe you are looking for