USB Sync issues

I am having difficulty sync'ing my 8830 with my Vista machine.  I've DL'ed 4.6 (and uninstalled per the complete uninstall page and tried again) and just cannot get the Desktop Mgr to see the Blackberry.
Of interest, the phone is charging, and it asks if I want to use mass storage each time (and if I select yes I can see the folders of the BB).  But I cannot for the life of me to get the software to see my BB. 
I used Admin to run the app and open it as well.
Any suggestions?
regards,
Deuce

Hi,
I have unlined two link that should help you with your problem.
Please let me know if this resolves your problem!
Thanks,  
CLean unistall of Desktop:
http://www.blackberry.com/btsc/search.do?cmd=displ​ayKC&docType=kc&externalId=KB02206&sliceId=SAL_Pub​... 
Recommended Desktop Software for use with Vista:
http://www.blackberry.com/btsc/search.do?cmd=displ​ayKC&docType=kc&externalId=KB05468&sliceId=SAL_Pub​...
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Similar Messages

  • More Aperture/iPad syncing issues

    Each time I create a new project or album in Aperture, I have trouble getting the images to the iPad when I sync. I sometimes need to sync several times until the images are recognized and imported to iPad. I do have the albums designated manually, rather than all, which means I have to sync and then sync again after I check the checkbox for the new album. I understand that, but sometimes I have to go back into Aperture to make sure the previews are updated. If I choose to update the previews for a project, Aperture will usually tell me that they're already up to date, but often they will not show up on the iPad, even after I check the appropriate box for the album in iTunes. Sometimes I get good results if I delete the previews and regenerate them in Aperture.
    The second problem is the sort order. Even if I have "sort by filename" selected in Aperture, they do not show up in this order on the iPad--despite what the support article says about this. They appear to only show up in Date order. I've tried repeatedly resetting the sort order, but it does not change on the iPad. Sometimes I have to delete the album from the iPad, (uncheck the album in iTunes and sync again), then recheck it and sync yet another time. This does not always work, however.
    It is very frustrating. The interface between Aperture and the iPad is very wonky. I often have to sync repeatedly, just to get the photos on the iPad and even then they're usually in the wrong order.
    Aperture appears to have two types of previews: "previews" and "sharing previews," but "sharing previews" don't seem to appear in the documentation. I've noticed that, even when Aperture says the previews are up to date, when I exit the program, it will sometimes (but, maddeningly, not always), give the message, "updating sharing previews" before quitting. I cannot figure out how to force this, however. Sometimes opening and closing Aperture several times will cause it to do this, but I can't be sure.
    iTunes seems to have its own process in which it "optimizes" images for importing to the iPad. Like Aperture's mysterious "sharing previews," "optimizing" does not show up in the iTunes documentation or help files.
    This process either needs to be improved, or at least documented so users can understand how to avoid these problems.

    1. Some people have reported slow syncing with anything but the iPad's own USB cable (e.g. using a US cable from an iPhone/iPod). Try different cables
    2. More work - disable iTunes syncing completely, then re-enable a bit at a time, e.g. one movie at a time, one playlist at a time, one photo album at a time. There are periodic reports of syncing issues caused by a bit of media that's been corrupted, and this (tedious) approach allows you to identify where the problem might be.
    3. If that fails, do a clean restore back to factory settings, then progressively re-enable syncing as above.
    Hope this helps

  • How do I get rid of lip-sync issues with iTunes 10.2.2.12?

    Hi Everyone.
    Firstly, a very Happy Easter!
    I'm having lip-sync issues with iTunes playback on my PC. The video is largely smooth with the occaisional choppiness when the CPU is made to work hard. (Playback on my iPod Touch is fine).
    The system stats for my PC are at the bottom of the post.
    The sound is produced through a Creative Live Sound Blaster Live! 5.1 card.
    Video is through a NVIDIA Geforce 6200 with 512Mb of RAM. (All video and audio drivers are up to date).
    The physical set-up is that I have iTunes installed on the C drive and my media installed on an external USB hard-drive.This isn't just a problem with 10.2.2.12 - it's been there for the last few updates.
    I suppose my main questions are:
    Should iTunes and my media be on the same drive? (Which would mean the external drive as I'm short on space on the C drive).
    Is there some combination of settings in QuickTime that will solve this? (I've tried different combinations, but it doesn't really help).
    Is the spec (below) of my PC causing any issues.
    Here's an Easter Egg for anyone able to help!!
    All the best
    BandAidUK.
    System Information
    Time of this report: 4/24/2011, 10:13:44
    Machine name: DEREK
    Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.101209-1647)
    Language: English (Regional Setting: English)
    System Manufacturer: Dell Computer Corporation
    System Model: Dimension 8300              
    BIOS: Phoenix ROM BIOS PLUS Version 1.10 A07
    Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz
    Memory: 3326MB RAM
    Page File: 1273MB used, 3941MB available
    Windows Dir: C:\WINDOWS
    DirectX Version: DirectX 9.0c (4.09.0000.0904)
    DX Setup Parameters: Not found
    DxDiag Version: 5.03.2600.5512 32bit Unicode
    Display Devices
            Card name: NVIDIA GeForce 6200 
         Manufacturer: NVIDIA
            Chip type: GeForce 6200
             DAC type: Integrated RAMDAC
           Device Key: Enum\PCI\VEN_10DE&DEV_0221&SUBSYS_02F3196E&REV_A1
       Display Memory: 512.0 MB
         Current Mode: 1280 x 1024 (32 bit) (60Hz)
              Monitor: Plug and Play Monitor
      Monitor Max Res: 1600,1200
          Driver Name: nv4_disp.dll
       Driver Version: 6.14.0012.6099 (English)
          DDI Version: 9 (or higher)
    Driver Attributes: Final Retail
    Driver Date/Size: 10/22/2010 07:23:24, 6359552 bytes
          WHQL Logo'd: Yes
      WHQL Date Stamp: n/a
                  VDD: n/a
             Mini VDD: nv4_mini.sys
        Mini VDD Date: 10/22/2010 07:23:24, 9623680 bytes
    Device Identifier: {D7B71E3E-4161-11CF-0D6D-FF2200C2CB35}
            Vendor ID: 0x10DE
            Device ID: 0x0221
            SubSys ID: 0x02F3196E
          Revision ID: 0x00A1
          Revision ID: 0x00A1
          Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV9_B ModeWMV9_A
    Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                       {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                       {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                       {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
             Registry: OK
         DDraw Status: Enabled
           D3D Status: Enabled
           AGP Status: Enabled
    DDraw Test Result: Not run
    D3D7 Test Result: Not run
    D3D8 Test Result: Not run
    D3D9 Test Result: Not run
    Sound Devices
                Description: Creative SB Live! Series
    Default Sound Playback: Yes
    Default Voice Playback: Yes
                Hardware ID: PCI\VEN_1102&DEV_0006&SUBSYS_10031102&REV_00
            Manufacturer ID: 1
                 Product ID: 100
                       Type: WDM
                Driver Name: P16X.sys
             Driver Version: 5.12.0001.0129 (English)
          Driver Attributes: Final Retail
                WHQL Logo'd: Yes
              Date and Size: 8/14/2003 16:58:12, 1296384 bytes
                Other Files:
            Driver Provider: Creative Technology Ltd.
             HW Accel Level: Full
                  Cap Flags: 0xF5F
        Min/Max Sample Rate: 8000, 96000
    Static/Strm HW Mix Bufs: 64, 63
    Static/Strm HW 3D Bufs: 64, 63
                  HW Memory: 0
           Voice Management: No
    EAX(tm) 2.0 Listen/Src: Yes, Yes
       I3DL2(tm) Listen/Src: No, No
    Sensaura(tm) ZoomFX(tm): No
                   Registry: OK
          Sound Test Result: Not run
                Description: SoundMAX Digital Audio
    Default Sound Playback: No
    Default Voice Playback: No
                Hardware ID: PCI\VEN_8086&DEV_24D5&SUBSYS_01571028&REV_02
            Manufacturer ID: 65535
                 Product ID: 65535
                       Type: WDM
                Driver Name: smwdm.sys
             Driver Version: 5.12.0001.7000 (English)
          Driver Attributes: Final Retail
                WHQL Logo'd: Yes
              Date and Size: 3/22/2005 11:08:40, 260224 bytes
                Other Files:
            Driver Provider: Analog Devices
             HW Accel Level: Full
                  Cap Flags: 0xF5F
        Min/Max Sample Rate: 100, 192000
    Static/Strm HW Mix Bufs: 33, 32
    Static/Strm HW 3D Bufs: 33, 32
                  HW Memory: 0
           Voice Management: Yes
    EAX(tm) 2.0 Listen/Src: Yes, Yes
       I3DL2(tm) Listen/Src: Yes, Yes
    Sensaura(tm) ZoomFX(tm): Yes
                   Registry: OK
          Sound Test Result: Not run
    Sound Capture Devices
                Description: Creative SB Live! Series
      Default Sound Capture: Yes
      Default Voice Capture: Yes
                Driver Name: P16X.sys
             Driver Version: 5.12.0001.0129 (English)
          Driver Attributes: Final Retail
              Date and Size: 8/14/2003 16:58:12, 1296384 bytes
                  Cap Flags: 0x41
               Format Flags: 0xFFF
                Description: Hauppauge WinTV 88x Audio Capture
      Default Sound Capture: No
      Default Voice Capture: No
                Driver Name: hcw88aud.sys
             Driver Version: 2.125.28070.0000 (English)
          Driver Attributes: Final Retail
              Date and Size: 3/12/2010 09:47:58, 13440 bytes
                  Cap Flags: 0x41
               Format Flags: 0xCC0
                Description: SoundMAX Digital Audio
      Default Sound Capture: No
      Default Voice Capture: No
                Driver Name: smwdm.sys
             Driver Version: 5.12.0001.7000 (English)
          Driver Attributes: Final Retail
              Date and Size: 3/22/2005 11:08:40, 260224 bytes
                  Cap Flags: 0x41
               Format Flags: 0xCCC
    DirectMusic
            DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
         DLS Version: 1.00.0016.0002
        Acceleration: n/a
               Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
                      Creative SB Live! Series, Software (Kernel Mode), Output, DLS, Internal
                      SoundMAX Digital Audio, Software (Kernel Mode), Output, DLS, Internal
                      Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                      Creative SB Live! Synthesizer [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                      Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Output, No DLS, External
                      Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                      Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Input, No DLS, External
            Registry: OK
         Test Result: Not run

    Select *List view* instead of *Album list view*. These are in the View menu or the boxes next to Search, on the right top of iTunes.
    and the column next to it with a number in it that I have absolutely no idea what it's for. I want those two columns OUT.
    In List view, you can turn off every column (in menu View > View options) except track name.

  • BB Curve, Pocket Mac, Mac Book Pro sync issues, all of a sudden

    Hi, new to the forum here, but not to Blackberry or Mac! I've been using this sync combo since it's inception back when I first got a 7100, then with my T-Mobile Curve when it came out, with little or no problems. I now, all of a sudden, have issues! I did look around at some other posts to see if I could find a solution, or someone with the same problem, but I think my prob is slightly different, so forgive me if I'm repeating some things here that others already have talked about!
    After dropping my Curve over in Europe last month and cracking the screen (ugh), I got a replacement from the insurance company, which turned out to be a remanufactured phone (for the $130 deductible??? - another topic!).......  there were apps missing, and the phones'  keypad did not feel right, but IT DID sync ok... at any rate, I got them to send me a NEW phone, which I just received. It has the same exact software version as the other phones I had.
    I did my usual USB sync with Pocket Mac, starting just with the contacts (mac address book) and notes (stickies). I selected 'overwrite device' in the advanced prefs of pocket mac (all latest versions installed, with latest drivers as well).  Worked fine, as usual.
    I then added some addresses in my address book on the mac, and went to do another sync. It was at this point that the sync did not work, either in 'overwrite device' or 'two way sync'. The added addresses were not on my phone.
    What I've tried, and noticed so far:
    On the phone, during the 2nd sync, no matter which pref I choose, the ARROW on the connection status window on the phone is going the WRONG WAY, towards the computer icon, not the phone icon. Since I added info only on the computer, the arrow should be going toward the phone, especially when in 'overwrite device' pref. This was NOT the case on the original sync, when the phones' address book was empty; the arrow was going the right way, towards the phone. I did the 'wipe/reset' that Brodie suggested in another post, which is going to the address book on the phone->menu->options->scroll to 'default' and type in 'rset'... that wiped the address book from the phone.
    I then did another sync, pref in 'overwrite device' and again it worked fine, with all my addresses, including the recent entries, transferred as they should be to my Curve...
    I again made a few changes as a test, adding one address on the phone, and one in the address book on the mac, did a 'two way' sync, and again, nothing, both new entries were NOT copied. 
    The other thing I noticed, is the connections status window goes away after a bit of time on the phone (like it's finished), but the pocket mac software on the Mac is still spinning, acting like it's still syncing, with the status bar near the end, but it never finishes. I have to quit it manually. This did not happen on the 'clean' sync, everything finished like it was supposed to.
    This obviously is a drag to not be able to sync without wiping the phones' address book, especially when data has been entered on the phone, and in fact, in that case, there is NO WAY to get it to the computer at this point! 
    I'm running MAC OS 10.4.11. Brand new sync cable that came in the box with the new phone.
    As I said, all software and drivers having to do with pocket mac and blackberry are the latest versions just installed.
    Maybe the desktop mngr for mac will solve all this, but, until then? 
    Thanks in advance for any help!

    Hi and welcome to the forums!
    KB10489 Data synchronizes from the BlackBerry device to the Macintosh computer, but not the other way.
    See if this offers any help
    Thanks,
    Bifocals
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • IPhone and Windows 7 64 Bit - syncing issues

    Hi,
    Just wondering if anyone is able to help. I have updated to Windows 7 and am having problems syning my iPhone. It comes up with a multitude of errors but the most common is:
    'The iPhone "Michael's iPhone" can not be syned. The required file can not be found.
    I have restored the iPhone and after it resets, it sits at the Setup Window in iTunes for ages, then clicks over, starts syncing (it is doind that now) but also displays the error. Will be interesting to see if it actually finishes the sync and to see if the apps work on the phone.
    I have also removed iTunes, Quicktime, Mobile App Supprt, Apple Software Updater, Bonjour and reinstalled and still the sync issues coninue. I also ran the diagnostic tool in iTunes on syncing and detecting the iPhone and it reports everything is ok.
    Microsoft Windows 7 x64 Business Edition (Build 7600)
    Gigabyte Technology Co., Ltd. P55-UD6
    iTunes 9.0.1.8
    QuickTime 7.6.4
    FairPlay 1.5.18
    Apple Application Support 1.0
    iPod Updater Library 9.0d11
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.6.0.32
    Apple Mobile Device Driver 1.45.0.0
    Bonjour 1.0.6.2 (118.5)
    iTunes Serial Number E400D*7E1<Edited by Host>
    Current user is an administrator.
    The current local date and time is 2009-10-23 19:56:37.
    iTunes is not running in safe mode.
    Video Display Information
    ATI Technologies Inc., ATI Radeon HD 5800 Series
    ** External Plug-ins Information **
    No external plug-ins installed.
    Genius ID: cecad029456cdd284aef514988f34808
    ** iPod/iPhone Connectivity Tests **
    iPodService 9.0.1.8 is currently running.
    iTunesHelper 9.0.1.8 is currently running.
    Apple Mobile Device service 2.50.39.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    Texas Instruments 1394 OHCI Compliant Host Controller. Device is working properly.
    Connected Device Information:
    iPhone, iPhone 3GS running firmware version 3.1.2
    Serial Number: 88924**3NS <Edited by Host>
    Most Recent Device Not Currently Connected:
    iPod nano (5th Generation) running firmware version 1.0.1
    Serial Number: YM937**72D <Edited by Host>
    ** iPhone/iPod Touch Sync Tests **
    Sync tests completed successfully.
    I have applied all software updates and the latest chipset drivers for the motherboard. My Nano syncs without a problem. It just seems to be my iPhone.
    I have iTunes installed in the defualt directory on C:\ with the mobile apps etc. Music is located on my E:\
    I am not sure what to do now....

    Well, the new gigabyte bios fixed the issue.

  • IOS 6 and iTunes 10.7 WiFi Sync issues

    WiFi sync works for a day or two then from the device is just keeps saying Looking for Mario Michela's iMac...  I restart iMac, reboot iPhone and or iPad. connect via usb cable, uncheck WiFi Sync (apply), recheck WiFi Sync. It will work again for 2 or 3 days. Then starts to fail again.
    I've tried using Eithernet and wifi on the mac (no difference)
    I've tried turning off the firewall (no difference)
    I've reset all setting on the iPhone (no difference)
    I've reset SyncServices Folder (/System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsy nc.pl full) -(No difference)
    I've called Apple Care 3 times, I keep getting passed around because sync is between product departments.
         iOS doesn't support desktop applications, iMac doesn't support mobile devices..
    I'm hoping iTunes 11 fixes this issue.. This issue didn't occur prior to iTunes 10.7.

    I am getting sync issues too (although on OSX) - seems like others are getting issues too:
    https://discussions.apple.com/message/19834721#19834721
    Good luck,
    Chris

  • ITunes sync issues with Windows 7 64k Bit

    I am beyond frustrated! I have attempted for the past 3 days straight to figure out why iTunes keeps having syncing issues with all my devices- Nano 8GB, Touch 8GB, iPhone 3G 8GB. When I first connected the devices for the first time iTunes froze up and I had to hard boot. I then had to "restore" the devices as they were messed up. Since then I have had syncing issues. It says it is syncing but then it stops and freezes before it is finished and is unresponsive requiring me to end the program. Then my computer does not recognize the iPod is connected so I have to reboot my computer and it all starts over again. I'm not trying to sync a million song, 600 songs less than 2Gig.
    Called Apple, they had me uninstall iTunes 9 and reload it. That did not fix the problem. Called back and they told me to go to the Apple store and have them check my devices (they did not as they said they were pretty sure it was not iTunes or my devices) that it was probably Windows 7. MS points the finger at iTunes 9, Apple points the finger at Windows 7... all the while me (the customer) has no resolution. I don't care what the issue is... I would just like to figure out how to fix it (if it's my computer fine...I'll take it in to have it fixed) but I just cant get anyone to help figure out what/where the issue is.
    I have tried many of the "tricks" that are posted when you google the issue.. ie reinstall drivers etc. The "Genius" at the Apple store searchd and found something that said it might be my motherboard needing an updated driver (I updated that and nothing changed).
    Would REALLY appreciate it if someone could help
    Thanks!

    Hi,
    Does your PC have a NVIDIA USB Enhanced Host Controller Interface (EHCI) chipset?
    If it does, you may want to try the Microsoft hotfix available here: http://support.microsoft.com/kb/976972.
    If not, try the general USB troubleshooting tips in this article: http://support.apple.com/kb/TS1286
    -Jason

  • Extreme charging and syncing issues

    Okay, so for the past few weeks I've been developing charging and syncing issues. The first third party usb cable worked for a while and after some point it begin to physically wear and tear, and wires were disconnecting. Needed a new charger, so naturally I went and got another one. However, it didn't work, and as a measure to see if it was faulty, I plugged in the old one and smelt smoke/a burn smell.
    So, I plugged the new charger into an old ipod touch 2G and it charges and syncs just dandy. The 3GS is a particularly weird case here; as it will not charge while on. After letting it die, I plugged it in and got an empty battery indicator with a charging (lightning) symbol, and after a couple of minutes it powered back on, but still wasn't charging once ios actually booted up. Weird, right? If I could connect to windows I could restore it to remove the jailbreak, as using Erase All Content and Settings keeps the phone in an endless loop until I hard reset.
    The kicker here is that it seems to only charge when it's off, as if its plugged in and you slide to power off, and turn it back on later, it will sometimes have a higher percentage. And, at the place I work, we have many iPads so I plugged it up to the iPad chargers and it worked with some of them, albeit slower then expected.
    Is my phone not getting enough voltage or something of the nature? I have 3 wall adaptors, one apple, and two of them standard LG adaptors, and a third party usb cable that notably works for the iPod just fine. I've connected it to 3 different computers with itunes and the result was the same as if it was dead and plugged into the wall; enough power to boot to home screen then die afterwards.
    The thing that get's me is when I hit Erase All Content and Settings and it's plugged, it makes a charging noise indication but only when I hit that reset button. If it wasn't for that, I would beleive it was a hardware issue. That, or I'm just trying to deny the phone's inevitable fate. I needed a reason to switch to the 4s, so maybe this is it. I don't like giving on on something without fixing it though so it's gonna bother me until I do.
    Thanks for any suggestions or help!

    halp

  • A Sync Issue Not Even Apple Seem To Have An Answer For?

    Hi,
    Since day 1 with my iPhone (UK release date) ive been having syncing issues. Ive tried every single syncing tip on the web but cannot solve them and today, as the request of Apple i took my phone back for a replacement...but the same thing with the new one.
    Basically my phone syncs fine if you make changes...eg if you tick or untick a box and click "apply" it will sync all changes, put all music, videos, settings on etc. But if you just click sync without ticking or unticking boxes (or changing anything) or you leave "auto sync" on, then the iphone will freeze up and reset itself while itunes tries to sync.
    I believe at this point is when iTunes tries to make a backup of my phone, which it has never managed to do - the work around is to never have a backup and also tick or untick a box to get the data on my phone, this is annoying if you make a change to media, say an album cover or something, as you have to click on other boxes for itunes to think you've changed something for it to sync to the phone - otherwise the crash occurs.
    So to recap ive tried reinstaling itunes, deleting itunes prefs, repairing permissions, hiding all the itunes media, resetting iphone, restoring, turning off and on etc (none of this applies now as ive changed iphones so its not a phone issue) restarted computer, shutdown computer, tried different cables, tried different usb ports, deleted history in isync, and various other things..
    Does anyone have anything more left-field as this is very annoying, so far i haven't tried it on another system because of having no data to sync on them, but i will try on another macbook in the house, and i will try on windows vista itunes on this very macbook and see if that works (ruling out a hardware error)
    Any help much appricated as id like to have auto sync on, not have to worry about accidently hitting sync, not have to use workarounds and most of all be able to get a backup of my settings on the computer! Im just suprised that an Apple computer is having problems with an Apple phone!
    - Danny

    Answer is here...
    http://discussions.apple.com/thread.jspa?messageID=6409404#6409404

  • Sync issues with iPhone 6 Plus and iTunes

    I'm having issues with syncing my iPhone and iTunes.
    I am running: Mavericks 10.9.3 | iTunes 11.4 | iOS 8.0.2
    Every time I try to sync my iPhone 6 Plus with iTunes, the sync process gets stuck on step 5 of 5 (waiting for changes to be applied).  The longest this has occurred for is 2hrs.  After this time I have stopped the sync and ejected my iPhone.
    I had another issue with my phone when playing music.  When going to play music, I was given the error message saying that the song could not be found.  I connected my iPhone to iTunes and went to the tab in summery page, 'on this iPhone'.  I found the song and could see that next to the song was a small what looked like dotted grey circle.  After Googling this, I found a video saying that if i was to remove all my music and then add it again, this should fix the problem with this song.  I did this and this was when the issue occurred again.
    I unticked the option to remove all music but the sync did not finish. So I cancelled the sync, ejected my iPhone and tried again.  This time, the summery page of my iPhone said there was no music on my iPhone and the 'on this iPhone'  tab, this all so said there was no music however, my music was still on my iPhone including the song that would not play.  All played ok.
    I have read lots in the Apple forums about lost of difference reason this may be happening.  Things like bugs in iOS 8, app updates being transferred during the sync process, the latest iTunes version has bugs and even a dodgy USB cable could cause it.  My iPod running iOS 5 syncs all ok but I get this problem as well on my iPad Air.
    I all so had this issue with my old iPhone 4S.  The problem occurred when running iOS 7 and 8 on the 4S.  When I had it on the 4S, I did a restore of the 4S 4 times and thought I had found the issue down too a dodgy app.  However, now that it has happened on my new iPhone and still not using that app, could this be an issue with my Mac/iTunes?
    I am in contact with Apple Care, but this is such a long process. 
    So if anybody could please offer any advice on this or steps to try to maybe solve the issue, it would be really helpful.   Or if anybody is experiencing the same problem, it would be good to know its not just my devices and Mac producing this sync problem.
    I will update my post with any information provided by Apple Care as and when I get it.
    Thanks for reading and thanks for your time.
    Mark. 

    Hi,
    Just wanted to updated my original post and give some more information on this issue that I'm having with my iOS devices running iOS 8.0.2 and iTunes 11.4.
    Firstly I just want to updated my details about what version of Mavericks I'm running.  I'm running 10.9.5 - I put the wrong version down in my original post.
    So over the last week, I have had a few phone calls with Apple Care an am dealing with a senior technical advisor about this issue.
    I have been given some instructions that I am currently working through to see if it solves the sync issue with iTunes and my iOS devices. 
    The Apple Care advisor has pointed out that a iTunes version issue with music that I have ripped to iTunes and the current iTunes version could be what is causing the problem.  For example, every song that I have purchased from iTunes since having an account, I was told are all exactly the same the same when it comes down the to data/information about that track/album that iTunes stores with the music but when it comes to music that I have added to iTunes myself from a CD,  this was added and encoded with the version of iTunes that was running at the time of adding the music.  So going through all the music that I added to iTunes over the last 10 years, you can imaging that there was lots of mixed version of iTunes linked to lots of different music.
    At the moment, I'm having to go through all my music and find any that I have added and create a new ACC version of that music and delete the old version.  However, due to the amount of music that I have, this is going to take a long time.  When I was on the phone to the Apple Care advisor, we did several albums as a test and they all synced over to my iPhone.  This may just have been luck though at that time.
    Now, I'm not saying that this will solve the problem that I have with the sync issue but I am going to try it and see how I get on.  The only down side to this fix as far as I can see at the moment, is  that when it's all done, I think I will have to fully restore all my iOS devices to get music on to them.
    I will of course updated this topic when I have got through all my music and tried to sync my iOS devices.
    Thank you all for your comments.

  • IPad syncing issues, please help.

    I know this is a long read, I appreciate you taking the time to follow the details to help me figure out what is happening with my iPad.
    As a preface, I update the firmware to all my Apple software (including iTunes) and my MacBook OS (Snow Leopard) and my iDevices the day the updates come out, so all these issues occured with the current firmware.
    A few weeks ago, I was syncing my iPad earlier to my MacBook via iTunes. The backing up step was going on for about 10 minutes and it only got 1/20 across the status / progress bar. I "X'd" out of that and just synced the rest of it without the backing up step.
    Then I disconnected the device and reattached it. I went back and am re-syncing. The backing up step has been going for almost an hour and its only 1/5th across the progress bar. It is moving, but noticeably. If I put my mouse pointer icon on the end of the progress made so far, then come back and look at it 10 minutes later, it has made progress. So, it is backing up, but so incredibly slowly.
    Anyone experience this before? Any idea what could be the cause or fix to this?
    I left it for several more hours. In fact, I started the syncing around 6 pm, and went to bed around 11. It was only 3/4 to 4/5 done backing up by that point.
    I left it overnight, and in the very early morning (6 or 7 am), it had the familiar and comforting "Sync Complete" message.
    Still have no idea why it took so fookin long, or it it will happen again next time.
    I don't think the problem is the issue pertaining to Zinio disrupting backups, as discussed here: http://imgs.zinio.com/faq/ipad.htm#backup because I already followed those steps.
    Now, two nights ago, I updated the firmware. It only took a few minutes. I didn't notice until last night, some of my old movies that I handbrake'd into iTunes were no longer on my iPad. I had to go back into the Time Machine to retrieve them.
    I re-synced the iPad. It took about 10 minutes doing step 1, backing up. However, it froze at about 95% complete. I thought it was just going slow again (last time was hours!), so I went to bed. I woke up this morning and it was still frozen. I ejected the iPad from the sidebar window and stopped the sync by clicking the little black "X" in the message window.
    I shut down iTunes and restarted my MacBook. I re-synced and it skipped the Step 1, Backing Up and went in to Step 2. It completed the sync moving over the movies, but no photos or music.
    I re-synced immediately afterward (after disconnecting and reconnecting the device) and got a message about iTunes not being able to back up my iPad due to another syncing in process. It still synced and this time it moved about 256 photos. Not sure why- maybe I had "Sync recent 1000 events" or something checkmarked in the iTunes Sync window.
    I re-synced again immediately afterward (also disconnecting and reconnecting first) and got the same message about iTunes not being able to back up my iPad. It still synced the rest of the sync process, but this time it moved about a dozen songs around. I don't know why I each time I sync it does different things and I get the error messages.
    My iPad seems to be giving me issues with syncing, anyone have any idea what is going on or how to resolve it?
    Thanks!

    1. Some people have reported slow syncing with anything but the iPad's own USB cable (e.g. using a US cable from an iPhone/iPod). Try different cables
    2. More work - disable iTunes syncing completely, then re-enable a bit at a time, e.g. one movie at a time, one playlist at a time, one photo album at a time. There are periodic reports of syncing issues caused by a bit of media that's been corrupted, and this (tedious) approach allows you to identify where the problem might be.
    3. If that fails, do a clean restore back to factory settings, then progressively re-enable syncing as above.
    Hope this helps

  • Itunes won't tranfer data to my iphone during the usb sync

    To make a long story short, my laptop was stolen a few weeks ago and the itunes - iphone sync won't run properly on my new computer.
    The details: Installing itunes and connecting using my Apple ID, I downloaded my previous purchases (music, apps, etc) from the itunes store, and then attempted to run the sync with my iphone. Note that I was still running the older version of ios at that point in time. I have since updated to ios 5, and my contacts, photos, and text messages have been restored. I attempted to complete a usb sync but it's still not working. The sync "finishes" in a matter of seconds without transferring my purchases to my iphone. Help!
    I understand that the sync over wifi is a possibility, but I am having trouble connecting to my office wifi network at the moment. Any advice on how to successfully complete a usb sync?
    Thanks!

    Hi Kay-Kay@Japan,
    Welcome to the Support Communities!  The article below will help you troubleshoot the issue you are having with copying videos to your iPhone.
    iTunes: Videos may be unable to sync to iPhone, iPad, or iPod
    http://support.apple.com/kb/TS1497
    Cheers,
    - Judy

  • Sync issue with Outlook: Notes and Contacts ok - Calendar stopped syncing

    Greetings,
    Syncing (via USB cable) between my iPhone 3GS (3.1.2) and Outlook 2003 SP3 (Cal, Contacts, and Notes) has never been an issue until my recent upgrade to iTunes 9.0.2.25. Since then, I noticed that my Calendar was no longer syncing either way. When I hit "Sync", iTunes would indicate that it's going through the motion of syncing calendar but no synchronization of the items take place. Contacts and Notes continue to sync fine. One off behavior is that when I connect my iPhone via USB, I get a pop-up window with "Apple iPhone" header
    indicating "Camera connected" with option to pick an app (ie. MS Word) to lauch for this action. Never seen this pop-up. I just cancel out of it.
    Few things I did to try to fix the issue, in vain:
    1. iTunes->Info->Advanced: forced a "Replace information on this iPhone" - no changes to my calendar
    2. iTunes->Edits->Preference->Devices->Reset Sync History - all calendar entries on iPhone are gone
    3. "Repair/Reinstall" iTunes by running the install executable
    I stopped by the Genius Bar for an appointment related to my battery issue and asked the fellow about my sync issue. He wasn't "aware" of the issue.
    Anyone has a suggestion for me to try? Thanks!!!

    I tried now several things to resync my data cause it realy s*cks without. I tried to install itunes 9.0.2.25, 9.0.1 and 9.0.0 but nothing helped so far. I also tried to set Outlook 2003 as standard program for mailing (one forum wrote that helps, too) and I tried to find out if something blocks the communication betwen Outlook 2003 and itunes. But nothing could help so far, still no sync.
    I find it interesting that when I connect my iphone to my PC an then switch in itunes to the device and the "info" pane where I can setup all my sync data with PIM programs that Outlook still remains there as default synced application. But the subfolder in contacts also the mail accounts that should be synced cannot be seen. The option to force itunes to overwrite the calendar, contacts, notes and mailaccount data on the iphone no matter what can be selected. But when i do the synchronisation all of these options are unmarked again.
    Atm I'm thinking of tracing the problem down with Filemon.
    Message was edited by: madmaxzwo

  • Syncing issues with an external hard drive

    Hello, having a syncing issue with my iTunes right now. I have my library set up on an external hard drive because there isn't anymore space on my computer for my music, and the other day my roommate unplugged the external to ironically sync my ipod. There was a syncing issue of course but it's happened before so I wasn't worried, but now iTunes can't find a few hundred songs in my library still. I've restarted iTunes and replugged in my hard drive multiple times and restarted my computer and consolidated my library as well but nothing's working. All my music is still on my external but iTunes can't read some of the songs for some reason. Any suggestions at this point? I'm lost. Thanks.

    Welcome to AD!
    What drive letter did the exHD use before this happened? Do you know?
    Windows can change hard drive letters for USB devices without telling you.
    Use Windows Disk Management to change the drive letter back to what it was before your roomie created this havoc. Then start itunes, and tell your roomie it's their turn to I dunno, clean the toilet, or something useful.

  • USB Sync with 3rd party Software

    Seem like Verizon is determined to press using it's restrictive syncing technique with MS Outlook.  I guess they still want to compete with Outlook.  There is an issue with USB sync with the Droid X.
    Android OS 2.2 supports TETHERING, but Version does not.  By allowing tethering, 3rd party software can sync with the Droid X via USB.
    Why is Verizon restricting a feature so many business users want?  To compete with Apple, Verizon should wise up and support its user communit to allow easy syncs with Outlook (Contacts, Notes, Calendar) at the subdirectory level.  Business people will not post their sensitive information on the Google site in order to sync with their phone.
    Wise up Verizon!  You are missing an opportunity in your battle with Apple!

    Hi Nitsan
    You need to contact Oracle to see if they can help you. Supporting a Discoverer installation without a support number (CSI Number) is not the right thing to do. You need to pay up and buy the necessary support so that you can get the help you need.
    Having said that, Oracle do produce lists of certified operating systems and platforms etc and you will not have a lot of luck if you go outside those boundaries. I'm not saying that you have but usually if their product works on one platform but not on another it is usually something at the platform end that is causing the problem. In this case the first place I would look is to see whether there are any settings within the 3rd party security software that can be applied to tell it that anyone running Discoverer inside IE is allowed to do so.
    It may be as simple as allowing JInitiator to work. You may also want to try using the Sun JRE instead to see if that helps.
    I strongly recommend you buy a support license. You can buy these relatively cheaply and they can be purchased in groups of I believe 25 requests (could be a different number) thus keeping the cost down. If you yourself are an independent consultant you can buy your own support license and use that to get help for your clients.
    Best wishes
    Michael

Maybe you are looking for