Usb tethering not working in iphone5 after ios8 update

Hello,
I have upgraded my iPhone 5 to iOS 8.  My personal hotspot is not working anymore with my laptop.  There is a personal hotspot section under cellular in settings, however i am not sure what to do!
Kindly help on the same

Hi Pathikrit B,
Welcome to the Apple Support Communities!
Please review the following article for information on how to set up your Personal Hotspot.
iOS: Understanding Personal Hotspot
Have a great day,
Joe

Similar Messages

  • Sound not working on Ipad after ios8 update

    I updated to iOS 8.0.2 and the next day, while watching a TV show on my ipad, the sound completely stopped. I did a hard reset, thinking this would solve it, but it didn't work. Sound is not on mute. I tested out all apps that play sound, nothing was playing through the speakers; however, I can hear sound if I use headphones. I did the ipad reset suggestion I saw in a few articles, but still that hasn't work. Any other workarounds or am I going to have to go into the apple store?

    Hello jggarcia,
    It sounds like you have done all the troubleshooting from the article below. I know it is for iPhone, but the troubleshooting is still the same. After everything that you have done, check with the article to make sure you did not miss anything and if it is still giving you issue, then I would recommend making an appointment with your local Apple Store’s Genius Bar. 
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Regards,
    -Norm G.  

  • Apple Composite AV Cable no longer working on Ipad2 after ios8 update. Only getting sound, can you revert back to ios7 or buy a cable that will work any help would be appreciated

    Apple Composite AV Cable no longer working on Ipad2 after ios8 update. I'm only getting sound no video can you revert back to ios7 or buy a cable that will work any help would be appreciated
    Thanks

    The 30-pin connector on the iPhone 4 dock might not have all the connector pins to do video.
    I'm 99% sure the Universal Dock does have the pins (and therefor supports video out).

  • Camera not work ipad 4generation before ios8 update

    Camera not work ipad 4generation before ios8 update
    PLease help

    Hi Hellside,
    Welcome to Apple Support Communities.
    It sounds like there is an issue with the camera on your iPad. The article linked below has a lot of great troubleshooting suggestions for a similar issue on an iPhone but the suggestions should resolve the issue with your iPad too.
    iPhone: Hardware troubleshooting
    Camera isn't functioning or has undesired image quality
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    Issue not resolved
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    I hope this helps.
    -Jason

  • Itunes does not recognize my device after ios8 update

    Why does iTunes does not recognize my device after iOS8 update and what can I do to resolve this.
    I am getting a "plug-into-Itunes-logo" screen on my iPad. Thx!

    Hi there janis831,
    It sounds like your device may be stuck in Recovery Mode. Take a look at the article below for how to restore your device.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    -Griff W.

  • Wifi hot spot and USB tethering not working

    I updated my both Lenovo a 7000a phones to Bulid Number A7000-a_S144_150721_ROW  today,  Since then both of my phones stopped Wi Fi Tethering and USB Tethering.Base Band Version A7000.ROW.V15,2015/07/21 20.44I would like to mention further that Both the Wifi Tethering and USB tethering were working fine before the update! This is in contrast to the Previous bug found in S 142 version! Now devices are being connected but with limited connectivity.Please comment for a solution!

    I would like to mention further that Both the Wifi Tethering and USB tethering were working fine before the update! This is in contrast to the Previous bug found in S 142 version! Now devices are being connected but with limited connectivity.

  • My Amazon Prime Instant Video App does not show airplay symbol after IOS8 update

    JUst found out that the Amazon Prime Instant video app lost the airplay possibility after IOS8 update on ipad and iphone.
    Am I wrong or is there something I need to adjust on my devices?

    Airplay is found by swiping up and enabling via control centre
    Use AirPlay to wirelessly stream content from your iPhone, iPad, or iPod touch
    If AirPlay functionality has been removed or if there is error then it is up to the developer to fix

  • Badge count not working on reminder after IOS8 upgrade.

    Hello,
    after upgrade my iPhone 5s (64) to IOS8 last weekend, the badge count (only for the reminder!?) does not work.
    Deactivating / activating did not helps.
    Note: Reminder works with iCloud sync
    Thanks for any answer,
    Dirk

    same here: https://discussions.apple.com/message/15712300#15712300

  • HT1751 3G Data plan not working in iPhone5 after download of iOS 7.0.3

    After I downloaded iOS 7.0.3 Data plan is not working in my iPhone5; I tried resetting network; powered down and powered on; switched off LTE, airplane mode on and off; Cellular Services on and off, nothing seems to work.  Should I try Total Reset? (of course after backing up in iTunes)?

    Hello High Energy,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/TS3780
    Ensure that your software is up to date:
    Check for a Carrier Settings Update. Tap Settings > General > About.
    Check for an iOS Software Update. Tap Settings > General > Software Update.
    Note: Some updates may require a Wi-Fi connection.
    Remove the SIM Card and reinsert it. Allow the iPhone to acquire the network again.
    If your SIM card has SIM PIN enabled, try toggling it off: Tap Settings > Phone > SIM PIN.
    Try another location. If a different location works, but the original location still does not, contact your carrierto report the issue.
    Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
    Restore the iPhone as new.
    Best of luck,
    Mario

  • AirDrop not working on iphone5 after ios 7.1 update

    Hello
    My iphone5 does not connect with my ipad air on bt or airdrop, ipad can see iphone but iphone do not pair with any device
    I try hard reset, alter settings but won't work.
    It seems to be a bug on ios 7.1
    So sad because either I should use iCloud for exchange files Or with itunes

    Also having same problems as above, AirDrop not working between iPhones or iPads from iPhoto. On same WiFi, blue tooth searching for devices but not connecting. Tried hard reset, checked privacy settings, icon is there, blinks when pressed, but no other activity. Have used AirDrop previously many times with no problems, now nothing. Machines and iOS all up to date.
    Off to work, hope someone can come up with some solution.

  • IMessage not working on iMac after iOS8 install on iPhone

    I installed iOS8 on my iPhone and my iPad but it seems to have caused iMessage to stop working on my iMac. It tells me that I cannot use my Apple ID for iMessage at this time !? Strange!
    I updated the OS on the iMac to the most recent update but the iMessage still does not work. It is giving me an error message to contact Apple support with a code number shown. I did that but since its sunday today nobody was available who would know how to fix it, which is VERY annoying.
    If anybody knows what to do could you please let me know.
    Thank You.
    Stano

    There is no official public documentation of that alert as far as I know, but apparently it can sometimes mean that the same Apple ID is being used with the iTunes Store or one of the other Apple content stores, and the payment method is invalid. Sign in to the store and review your account. You do not, of course, have to provide any billing information to set up an account to use only with iMessage, as it's a no-charge service.
    Another possibility is that the primary or alternate email address is invalid. Search the Web for the phrase "My Apple ID." The top hit should be an Apple web page with that title. I'm not giving a direct link because such links are never to be trusted. Sign in and verify the ID.
    Otherwise, do as the alert directs. According to reports, you won't be charged for the support call if you select "Apple ID"—not the hardware model—as the product you're asking about, and cite the "customer code" in the alert as the "validation code" when you speak to the Apple representative. I can't confirm.

  • Ipod problem in iPhone5 after ios8 update

    Ever since I updated my iphone5 to ios8, my ipod has a minor problem in it. I am unable to use the alphabet search to locate the song I would like to listen to. Instead, I either have to use the search bar or scroll down to the song I would like to listen to. I figured this was a normal problem and restarted my phone a couple of time. I even synced my phone using itunes, thinking that may help. But the problem still persists. What can I do?

    Hi there ruchicuppy,
    Welcome to Apple Support Communities. 
    One thing you can try, to resolve the search issue in the Music app on your iPhone 5, is restoring the iPhone to factory settings. The article linked below will walk you through the process.
    Use iTunes to restore your iOS device to factory settings - Apple Support
    Cheers,
    -Jason 

  • ITunes not working on IMovie after Quicktime update

    I am running IMovie 4.0.1. The operating system is 10.3.9. I just updated Quicktime to 7.4.5 (v67) The Player is v25. I can’t play my ITunes (7.6.2 (9)) music on IMovie any longer---it was working perfectly with the last version. Any suggestions? Can I reverse the update to Quicktime?

    Hi
    I have had exactly the same problem with my windows vista 32 bit. I installed the new itunes 9 and have not been able to launch it. I have followed all apple's advice but no luck. It is now beginning to really annoy me as there are so many others that are having this issue and there are no solutions.

  • Smart Playlists not working on iPhone after iOS5 update..

    Okay, so I normally have a custom made smart playlist which I name "Recently Modified" so I can see the list of songs which I have recently updated in quality or changed the artwork etc., but since updating to iOS5, this playlist still works fine on iTunes but appears blank on my iPhone 4 while all other playlists work fine. Any reason why this might be?

    Right, well my settings for it look like this:
    (Date Modified > is in the last > 2 > days)
    It's not as if they are very complicated conditions, so I can't understand what would be wrong. Normally if a playlist had no songs in it, it wouldn't sync right? But this is what the playlist looks like on my iPhone, even though it does contain songs:

  • Google Maps Not working on C7 after Belle Update

    Hi,
    I have installed Google Maps on my C7 with Belle, but once I start the App, its getting closed automatically.
    The same app used to work perfectly on Anna.
    Can any one help me here to solve the problem!
    Regards,
    Azgar
    Solved!
    Go to Solution.

    I have the same problem with my 701, but I found a solution.
    Version 3.2.1 works fine with belle, you need to just turn on wifi for it to work.
    Hope this helped you.
    -------------------If this post helped you, click on accept as solution.------------------
    -----------------------------Appreciate by clicking on white star.----------------------------

Maybe you are looking for

  • Advise on using Branch office server as backup

    Hello and thanks for assistance, The site in question has four physical servers and two virtual servers. They have the following major functions. Server A is a DC/DNS server as well as hosting DFS files. Server B holds exchange server 2012A and the r

  • I can't recognize, open or remove GL! App

    I can't recognize GL! App. I don't what it is, I can't delete it or open it. It doesn't show in the list of downloaded apps. What is it ? How do I remove it? If I hold my finger on it shakes but doesn't have an X on it

  • Better documentation of AE API?

    hi, What docs are you guys using when scripting for AE? I'm using the CS6 pdf here: http://download.macromedia.com/pub/developer/aftereffects/scripting/After-Effects-CS6-Scri pting-Guide.pdf And I'm looking at the data browser inside ESTK. But isn't

  • Urgent Help with Vintage, Blended Look

    Hey everyone. New to the forum, but wanted to get some advice from the experts. I am desperately trying to achieve this exact vintage, blurred look for a photo set I have, and turn it into a preset or action for later use. Essentially, I want to matc

  • Modifying the smart form CRM_REMINDER_MAIL_01

    Instead of the number and description that gets displayed in the mail that we receive on status change of service desk message , we want to report Support team and the message processor . Any of you aware of what variable we need to use for that ?