USB tethering with OSX 10.6.4 (3GS)

After the 10.6.4 Snow Leopard update I'm unable to use USB tethering for accessing the network.
It works OK with Bluetooth though.
Anyone seen a similar behavior?

Hi; it turns out there was nothing wrong... just that I was running a virtual machine under VMware Fusion which was grabbing USB devices by default; this caused the iPhone to become attached to the virtual machine.
Telling VMware that I didn't want it to connect to the iPhone fixed the problem.
It's not really 10.6.4 related.

Similar Messages

  • Data network locked down when usb tethering with a lot of request (i.e. 3 to 4 tab pages and IRC)

    Hi, i am currently using the usb tethering on my ubuntu desktop(this also happened in win8 desktop) which the data network will be locked down when open 3 to 4 tab pages in 3-4 seconds or requesting large amount of data traffic (i.e. downloading movie)
    This locked down will be recovered only  after a few minutes (4 minutes at least) when there is no more request maked.
    OR reboot the phone again. 
    This doesn't affect receiving calls, only the data network is locked down
    I do see this is a software problem as i have asked for a exchange for phone, the same thing happened again.
    Does anyone get the same problem as i experienced?
    The firmware is v.114 
    Thanks for help

    Hi z1CUser
      based on your information, i believe there is not problem with the phone, since even second phone is doing same thing as first, what I can suggest is
    >check with different phone if possible and see whether it does same, incase 'Yes" then its might be with the internet connection i believe, you can give a call to Internet Service Provider, stating the issue faced in 2 different phones
    >if possible Refresh the Router and try to connect it again
    >Last you can try to restore the phone once
    Manjuboyz
    NOTE:
    Rate me(Kudos) If you are happy with my Resolution, Thanks

  • AT-LP2D-USB compatible with OSx 10.8.5?

    I have an old Audio-Technica turntable AT-LP2D-USB, but don't have the Audacity program. Found on-line downloads, but didn't know if any of these will work with my 2012 IMac. Anyone have an answer? Should I just get a new turntable??
    Thanks, Dennis

    This is an interesting thread.  How are you getting Logic X to run on 10.8 when the tech specs clearly say that the "minumum system requirement" is 10.9.5 or later? 
    https://www.apple.com/logic-pro/specs/
    I am still on Snow Leopard 10.6.8 and looking to upgrade but I see no need to go to Mavericks or Yosemite until the bugs are fixed.
    L

  • Anyone having problems Tethering with the USB Cable here is the solution

    Here is the solution to what took me 3 months to figure out, absolutely no one in this discussion board had the answer to no even the most expert.
    here is the site
    http://www.mackb.com/Uwe/Forum.aspx/mac/28074/USB-tethering-with-iPhone

    claire10b wrote:
    does anyone have any other ideas to try or observations on compatibility between iPhone, Samsung, and HTC for international SMS?
    International texting can be a crap shoot. It's not a question of phone compatibility but of carrier interoperability.  I regularly text from my iPhone to my (domestic) colleagues (who all have Samsungs) and to a friend with and HTC (an old one, too) without difficulty.
    One last question - I've never deleted my SMS from my friend, and would prefer not to. But it's pretty much the only thing I haven't tried. Does anyone think this might solve the problem eg if there are orphan texts somewhere on the network?
    I'm not sure there really is such  thing as an orphan text. If a text isn't deliverable, the carrier deletes it from it's system. SMS is quite a robust system.
    There is no general incompatibility between iPhones and other phones as far as texting is concerned. I suspect what you may be seeing is a combination of an old phone and/or an issue with one or both of your carriers. Intermittent technical problems are some of the most difficult to solve.
    I have vague memories of people saying that a trailing space at the end of the text made a difference when they had similar problems. It was a couple of years ago. (Honestly, this problem doesn't come up that often!). I don't recall if putting in the traling space helped, or removing it helped. It may also just have been magical thinkning.
    Best of luck.

  • Why is my USB tethering hanging?

    USB tethering with my iPhone 4S has been working fine until recently but its started to hang on pages every so often (When tethered to my Mac via USB), or refuse to load them at all. But when I go on my phone to try and load the page, it loads instantly.
    Does anyone have any idea what could be causing this?

    Anyone have any idea?

  • Can anyone recommend a portable USB 3.0 drive with hardware encryption, compatible with OSX and Windows 7.  I need it for my MacBook Pro 13", 2012, running Mountain Lion

    Can anyone recommend a portable USB 3.0 drive with hardware encryption, compatible with OSX Mountain Lion and Windows 7.  I need it for my MacBook Pro 13”, 2012, running Mountain Lion & Windows 7 Ultimate - BootCamp.  I’ve heard that the Buffalo MiniStation Encryption does not work with OSX, is that true..?  I'd like it to work with both operating systems, using the built in hardware encryption.  Thanks

    This article may help: A flashing question mark appears when you start your Mac.

  • Why tethering with USB cable doesn't work after IOS6.0 update?

    why tethering with USB cable doesn't work after IOS 6.0 update?

    Try updating the carrier settings, if that doesn't do it try following along with this Apple doc -> iOS: Troubleshooting Personal Hotspot

  • Upgrade to iOs 6.01 iPhone 3GS - USB tethering issue

    Since upgrading from iOs 6 to 6.01 I can no longer have USB tethering.
    Have
    - reset cellular settings
    - turn on/off personal hotspot setting
    Nothing seems to work - pls help.
    Am with Tesltra in Australia (apn = Telstra.wap)

    Nope.  All working fine on my family's various iDevices including iPhone 5, iPhone 4S, iPhone 4, iPad mini, and 3rd generation iPad.

  • I am purchasing a hard drive with OSX v  10.5 installed on it. can I make a usb or disk copy of 10.5 Leopard from this hard drive copy

    I am purchasing a hard drive with OSX v  10.5 installed on it. can I make a usb or disk copy of 10.5 Leopard from this hard drive copy
    Regards
    Jay

    If the Mac in your signature is what you desire to use 10.5 with, you can't do so, it is too new.
    If PowerPC application compatibility is what you desire with that Mac, look at this solution:
    https://discussions.apple.com/docs/DOC-2295#ROSETTALION
    10.5 only was distributed by CD and updates to 10.5 from free online downloads.  Why do you want 10.5, and what do you desire to put it on?  Is the person sending 10.5 using 10.5 for anything?  If he is, he can't sell the drive.

  • Usb wifi compatible with osx 10.8

    Hi I need to buy a usb wifi adapter for my macbook pro 13' mid 2009. The airport card won't work anymore. It's not a problem with airport itself, it seems the problem has something to do with some sort of connection problem between the airport card, bluetooth, the webcam and the mother board, and to repair that connection would be expensive. Does anyone know of any usb wifi adapter which would work with osx 10.8? 150 or 300 MPS? Thank you.
    Ben

    Pages 5 is not compatible with OSX 10.8, or anything else much.
    Page '09 is compatible.
    Peter

  • I had a Tascam US 122 usb interface, but it didn't work with OSX Mavericks. What model would work with this? Would the US-144 mkii work with my system?

    I had a Tascam US 122 usb interface, but it didn't work with OSX Mavericks. What model would work with this? Would the US-144 mkii work with my system?
    Thanks!

    You didn't mention the kind of track in GB you are trying to create, but if you are connecting the keyboard with a guitar chord to the Tascam, you will need to set up a Real Instrument Track in GB to hear anything. If your keyboard has a midi out, use a midi cable to the midi input of the Tascam, create Software Instrument Track, and you will hear something. But with a guitar chord, it won't send the right signal to a Software Instrument Track. The headphone jack in the Tascam monitors the signal coming back to it out of GB (if you choose the US-122 as your monitor in GB's preferences), so you wouldn't hear your keyboard if the track is not set up correctly. It could be the drivers, but since you didn't mention the type of keyboard or the type of GB track, I thought that might be a possible answer as well.
    eMac   Mac OS X (10.3.8)  

  • Is USB Tethering possible with the iPad.

    Since wireless Tethering isn't secure, I was considering USB Tethering which is. However, is that possible with the iPad?

    Hi
    You can share your tablets mobile data connection with other devices via USB, Bluetooth or by turning your table into portable Wifi hotspot.
    Note; this function is only supported by 3G models.
    In option Wireless & Networks you can configure and manage this setting
    You can tap More to find out the hidden options.
    The option Tethering & portable hotspot settings would provide the possibility (USB tehthering) to share the data connection.

  • Downloading Configuration File with USB Tethering Enabled

    I'm trying to download a configuration file from the my Verizon Jetpack MiFi 4620L, so I can easily reconfigure my device.  I configure the MiFi device the way I needed with USB  tethering enabled then download it through the browser.  However, when I upload that file, the USB tethering is disabled.  How can I changed the configuration file, so I don't have to re-enable USB tethering after I upload it? 

    Hello,
    It seems there is a limitation with the 4620L, the <Enable_USB_Tethered> feature and the config file that device generates.  I too was able to recreate your process and experience the same problem.  Because it was re-creatable I contacted VZW and had them confirm that the MiFi does not respond to the config file when it comes to USB tethering.  It was not on thier radar as a feature to fix for a future firmware update either.
    The only way to manipulate USB tethering is to manually sign in and check the checkbox for that feature.

  • Cannot usb tether with ipad mini to Macbook pro

    I have a Ipad air and Ipad mini both do not show up in the networks to connect to when usb tethering. I can tether with wifi and bluetooth to my Macbook pro. But not usb. I am running OSX 10.7.5 on my macookpro and ios 7.0.2 on the ipads. What's wrong? Celular data is turned on and the personal hotspot is turned on..

    Hello weagler,
    The following article provides troubleshooting steps that can help get Personal Hotspot working correctly.
    iOS: Troubleshooting Personal Hotspot
    http://support.apple.com/kb/TS2756
    Cheers,
    Allen

  • USB Tethering = Kernel Panic ?

    I can only find a couple of places where people are suggesting that it might be a general problem using an iPhone 4, iOS 4.3 and 4.3.1 and tethering with USB.
    A few of us are getting kernel panics on a wide variety of MacBooks and iMacs, and I suspect it's a more or less common problem.
    Are many of us getting frequent kernel panics when tethering to an OSX machine with an iPhone 4 and USB?

    Yes, the problem can be avoided by using WiFi Hotspot.
    However, those of us who tether frequently will want to leave the Hotspot turned on. This allows the broadcast radio to remain off, saving battery life, and allows the MacBook to automatically connect to the Internet when we connect the cable.

Maybe you are looking for

  • Error while generating XML file from rdf report.

    Hi All, we are having a rdf report that displays images retrieved from data base. I need to convert this report to xml report(using rtf template). when i tried to run the report after changing the output of the concurrent program to "XML", i am getti

  • Getting Error in Crystal report While passing parameters (DB: MS ACCESS)

    I have been trying to solve passing parameters in Crystal Reports. What I have done is : I added Crystal Reports to my project, I connect to database using OLE DB (ADO) in database expert form (for your kind information; I did not create or add DataS

  • SUS Limitpo NO value  in the front end

    Hi All , When LimitPO transfered from SRM to SUS, its get transfered successfully and stored the values in the database table BBP_PDIGP. But when we display the same PO in the SUS front end "purchase order value" & "confirmed Quantity" are blank. I i

  • Data Guard Broker configuration in oracle10g r2

    Hi, I am facing difficulties while configuring data guard broker. Our setup is RAC primary and single standby database. Show configuration is raising the following error... ORA-16607: one or more databases have failed on dcSTANDBY.log file it shows b

  • Bluetooth device discovery simple question

    when the master device is discovering all the devices in the local neighbourhood, do the devices being discovered know that the someone is searching for them, even if no contact is made. ie. Is there any java code in the bluetooth api's that i can us