USB Thumb Drive with Simple Finder

Hey everyone,
I'm trying to find a way that a user account restricted and using the Simple Finder feature would still be able to save their data to a USB Drive. I know that the drive shows up in the save dialog (and so does every other file on the system which doesn't seem very secure) but what I'd really like is for the drive to still show up on the desktop like it does normally.
Is there anyway to do this under Simple Finder or do I need to seek out other options?
Thanks!
David

Simple fix, use Workgroup Manager.
<Question Closed>

Similar Messages

  • A USB thumb drive with data created in Windows is not showing up on my desktop. Do I need a different driver or something?

    A USB thumb drive with data created in Windows is not showing up on my desktop. Do I need a different driver or something?

    OK in order to read those files you will need MS Office for Mac or install MS Windows on your Mac. You can get MS Office for Mac from anyone that sells Apple products. I would suggest the Apple Store, Best Buy, Amazon etc...For help getting the data from the memory stick I'd recommend visiting your local Apple Store or AASP and they can help you move it. It should be as simple as plugging the USB drive into your USB port and then open a Finder Window where you will see the drive on the left  pane. If you don't know what Finder is or how to open a new Finder window you need the sites I've noted below!!!
    Because you are new to OS X I would strongly recommend you bookmark and frequently visit the following web sites:
    Switch 101
    Mac 101
    Find Out How Video tutorials

  • Can I use a USB thumb drive with iPad

    Can I use a USB thumb drive with iPad2

    What do you want to do with the thumb drive?
    If for picture/movie files, You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import.
     Cheers, Tom

  • Using USB thumb drive with Parallels and Microsoft Windows XP

    I installed Parallels 3.0 because I need to use a few windows applications for work. I am currently unable to find the USB thumb drive when I plug it into the USB port. It is connected and is selected, but I can't figure out how to access it. I check in "My Computer" just like I would on a PC, but the thumb drive is not listed. Any suggestions.
    Macbook with Leopard
    Thanks.
    Jon

    You're right, it should show up under My Computer. You may want to post your question over on the Parallels forums: http://forums.parallels.com as they're more geared toward the issue since Parallels is not an Apple product.

  • Using a usb thumb drive with a mac

    So, I'm a recent windows user and when using a USB thumb drive, if you erased something, it would automatically update the thumb drive and show the right amount of free space.
    I've noticed with the mac, if you delete an item, it doesn't update, and you need to go into disk utility and format in order to show the appropriate amount of free space.
    Is there an easier way to do this?
    I searched for a few minutes on this topic, but couldn't seem to find anything. All apologies if I missed it.

    Choose Empty Trash from the Finder menu, or from the menu which appears when you control-click or click and hold on the Trash icon in the Dock.
    (38516)

  • How can I create a Lion USB Thumb Drive with the 11E2068 build?

    It seems that the Lion build from the Mac App Store is not compatible with my Macbook Pro Retina 15''. It's seems I would need the the build 11E2068 for my USB thumb drive to work properly.
    I don't want to go through the internet recovery and loose 8 hours.
    Is there anyway for my to get that build(11E2068) on my USB thumb drive?
    Thanks,

    keg55's given you article that allows you to capture the installer. These are the critical portions:
    Once that data has been downloaded, Lion Recovery restarts your Mac, immediately installs the OS, and then deletes the installer data. The trick is to interrupt that process—safely—so you can grab the installer data and keep it. Here are the steps to take:
    IMO, Apple needs to rethink this process. Unless users with machines that had Lion preinstalled, like yourself, let Apple know this process is terrible, they'll not change their minds.
    7.  IMPORTANT: Monitor the download’s progress. As the progress bar gets near the end, get ready, because once the status reads About 0 seconds remaining, the progress bar will disappear, the installer will spend a minute or two cleaning up, and then your Mac will restart. As soon as the screen goes dark, unplug your external drive. If you wait too long, your Mac will boot into the Mac OS X installer on that drive, starting the installation process. Interrupting that process can leave your Mac unable to install OS X unless you restart it and—I’m not joking—zap PRAM.

  • Just bought my first mac and trying to find and open a usb thumb drive

    Just bought my first mac and trying to find and open a usb thumb drive. Simple procedure on my pc but lost on the mac book.

    Is it on your desktop? Finder>Preferences>General>> show external Disk
    double click the icon on desktop

  • Prepare an usb thumb drive, to boot windows 7 or 8 in UEFI mode

    Purpose of this post:
    Prepare an usb thumb drive, to boot windows 7 in UEFI mode and install the system in pure UEFI mode.
    Why am I writing this:
    I had a hard time finding out how to make a custom installation of windows 7 in pure UEFI mode, and avoid using the factory restore disks. After hours of research, experiments etc I finally got the point and found a solution. And I'm happy to share my research with you. I hope this will be of help. If something is not clear, or more information is needed, I will be glad to explain things further.
    History:
    As most of you already know, BIOS was developed for PC in early eighties and has remained unchanged in recent years. But, since 2000, Intel started working on a new firmware interface, called Extensible Firmware Interface, abbreviated EFI. And since 2005 United EFI Forum has been handling the responsibility for development, management and promotion of UEFI specifications. Bigger companies like Intel, AMD, Microsoft and Dell have already started to bring out their products in accordance to UEFI standards which has more stable, secure and easier to use interface.
    How does UEFI works (in a nutshell):
    Once you power on the UEFI based PC, the Pre-EFI is executed which initializes only the CPU, memory and the chipset. This followed by Driver Execution Environment (DEX) where other hardware is initialized.
    Advantages of UEFI:
        It can integrate various drivers this will not require to load during booting so saves time.
        PC can connect to network without OS.
        Also integrated drivers allow rendering GUI based control panel which out dates the old school bluish BIOS screen.
        Not all the installed hard drives are scanned as boot drive is set during the installation of OS in UFFI.
        Applications like anti-virus and diagnostic tools can be stored on virtually any non-volatile storage devices attached to a PC.
    For a system to boot and install in UEFI the partition table of the HDD should be GPT (GUID Partition Table), not the old school MBR (master boot record). GPT has many advantages, can have virtually an unlimited number of partitions (windows will allow only 128) and impressively big partitions.
    Since UEFI has a lot of advantages why not having a system install and boot in UEFI mode? AFAIK new Lenovo notebooks/netbooks are UEFI capable and OS’s are already installed in pure UEFI mode.
    So, let’s go now to the point. Do you want to have more control over your HDD? Let say, you have a 320GB HDD and you have divided it in two partitions, one of 50GB, for your Windows 7, and the remaining for your data. If something goes wrong and you need to restore your system to factory default, with the recovery disks, it will wipe your partition scheme, set the system to default and this way your data will be lost.
    You may want to make a “vanilla” installation of windows from a USB thumb drive and avoid using factory recovery disks. Now here things get complicated. A standard preparation of the USB with Microsoft’s software (Windows 7 USB/DVD Download Tool), or other tools, will give you a bios installation, not a UEFI one. So for the system to boot, you will need to change some settings in bios, and changing it from UEFI to legacy bios. The installation will prepare the HDD in MBR partition table, and you will lose all the advantages of UEFI, described above.
    Now this can be avoided, by properly preparing an USB to boot and install in UEFI mode. Here are the steps:
    Step by step tutorial:
    1.    In a windows computer, download a legal copy (although trial) of the windows 7 os. You can do this from here: http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
    Be sure to download the same version that came preinstalled in your computer. For example, if you have a Lenovo x120e, with a Windows 7 professional, 64bit, download an iso image of the Windows 7 professional 64bit.
    2.    Once downloaded burn the iso to a USB thumb (at least 4GB) using Windows 7 USB/DVD Download Tool.
    3.    After preparing this, create a folder on your computer, name it whatever (i.e. W7pro64bit). Go to the root of your USB
    and select all the files and folders there (9 in total) copy, and paste to your folder you created, W7pro64bit.
    4.    Using windows format the usb again in FAT32. Windows 7 USB/DVD Download tool, formats it in NTFS. We need a FAT32 formatted disk to achieve our goal. Formating again the USB in FAT32 will not touch the MBR of the USB thumbdrive. And after copying back the files (see step 6) the USB will still be bootable. (nice, and simple, isn't it?)
    5.    Now go to the folder W7pro64bit and do the following:
    a.    Browse to W7pro64bit\sources\ and open install.wim file. It’s a big file, and can be opened as an archive with 7zip (free software). Do not extract it, do not modify it, just browse the file with 7zip. Just to be sure you do not mess with that file, you can copy it somewhere else in your computer, and than procede.
    b.    Browse this file (install.wim) to \1\Windows\Boot\EFI\ and locate the file bootmgfw.efi. Do not move, delete it, but just drag that file to the desktop. (if you have copied the file install.wim to another place in your computer, than you are safely do whatever you want with that file ) Close the 7zip program to release the install.wim file.
    c.    Rename the file you just copied to the desktop from bootmgfw.efi to bootx64.efi.
    d.    Now go back to w7pro64bit folder and browse \efi\Microsoft. Form there copy the folder boot and paste it one level up, on the folder: \efi. It will look like this: \efi\boot.
    e.    Now copy the file you saved on your desktop and renamed (bootx64.efi) to \efi\boot (inside the boot folder you copied on step 5d
    6.    Now go to the root of the folder W7pro64bit and select all folders and files (9 in total) copy, and paste all those files back to your USB thumb drive. (see step 4 for more info)
    7.    Go to the computer that you are going to reinstall, and before restarting it, use the program ABR (activation backup and restore) to backup the license of your windows os. (use google to find ABR). Advanced Tokens Manager (ATM ) is great too. This link may be of help: Backup and restore W7 activation. After the program finishes its magic, it will create a few files inside the folder where the program itself reside. Copy these files to a new folder in your usb.  Rename it to ABR so you will quickly find it later. (if you decide to use ATM, the procedure may be a little different. But you are smart enough to figure out how to use it)
    8.    Backup to an external storage all your data before continuing.(reminder: are you sure you saved the license as explained in step 7, to a safe place? To a external drive, to another computer? If you are sure, than go on with step 9)
    9.    Now restart your laptop, and enter your bios settings. Go to the boot settings, and set the computer to boot in UEFI only. Not both, not UEFI first, or legacy, BUT UEFI only. Save and restart.
    10.    Press f12 (or the corresponding key for your machine) to choose the boot device and chose to start from the USB thumb drive with your windows 7 pro 64 bit.
    11.    If everything is done correctly, your computer will boot from the USB.
    12.    Follow the wizard and choose a custom install, not upgrade. At the disk partition window delete all the partition you see there until you have only one unallocated space.
    13.    Select it, and click next to install windows, without making partition in this point. The installer will create a GPT partition table not a MBR since the USB booted in UEFI mode.
    14.    Immediately after the first restart remove your USB thumb, and the installation will continue from the HDD. Wait until installation finishes.
    15.    When you will be finally on your desktop, on the installed OS plug your USB go to the ABR folder and click on restore.exe. It will restore your license and your copy of windows will be activated.
    16.    Now you can go in computer management/disk management and shrink the HDD to create your partitioning scheme. Make sure to leave enough space to your windows os. (30gb or more for extra programs you will install at your choice)
    17.      Download from lenovo.com thinkvantage system update and update your system. Windows update too can install all the necessary drivers, if you need only  basic drivers support.
    Note: if tvsu will fail to work, see this:
    http://forums.lenovo.com/t5/ThinkVantage-Technologies/ThinkVantage-System-Update-Servers-down-the-wh...
    It may look a looong tutorial, but once you do this for the first time, it will look a piece of cake.
    Final words:
    From now on, you can install windows 7 in UEFI mode with your special USB without changing your partition scheme anymore. If you have a data partition beside your os partition (see the example above), when you reinstall the system using your USB thumb drive, at the disk partition window chose the partition where windows is installed, delete it, and reinstall windows to the unformatted area. Your partition with your data will be intact and the installation will automatically mount your data partition to the system. And, all the scope of this procedure, you will always have a pure UEFI installation of the system, with all its benefits.
    Have fun!
    abvasili
    Moderator note: changed subject to match new content.  Was: Prepare an usb thumb drive, to boot windows 7 in UEFI mode
    I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
    Who helped you today? Do not forget to thank him.
    My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.

    seanare wrote:
    Thank you, as I noted here, your post was the key to my getting a Windows 8 SecureBooting setup on a W530.
    In the case of Windows 8, I needed to copy the files away, reformat my USB key as FAT32 and copy the files back, and viola I was able to boot from my USB install media with the BIOS set to only boot UEFI.  From there, there rest was easy (for Windows 8, the copying and renaming is not necessary, the key is having a FAT32 partition on the USB media, rather than an NTFS one; the EFI files are already in the right location).
    Thank you again good sir.
    You are welcome... and I'm happy that the change of the file system helps with windows 8 too. Thanks for confirming that.
    abvasili
    I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
    Who helped you today? Do not forget to thank him.
    My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.

  • How to create bootable USB thumb drive from Lion on Mac Mini 2011?

    Hello folks
    Yesterday my new Mac Mini (Core i7 2,7 Ghz, 4 GB RAM, ATI Radeon HD6630M 256 MB) arrived. It replaces my old Mac Mini (Core Duo 1,83 Ghz, 2 GB RAM, Intel GMA950 64 MB). One day I'll replace the 500 GB 5400 RPM HDD in this Mini by an Intel SSD drive (just like I did with my previous Mini). I'll do a fully clean install then (formatting the SSD drive in Disk Utility and then installing Lion on it from a bootable USB thumb drive). The only problem is I can't seem to download Lion for free from the Mac AppStore (MAS) although I have bought a new Mac Mini which came with Lion pre-installed. I know how to create a bootable USB thumb drive with Lion on it when you download it from the MAS. But that's the problem... I can't seem to download Lion from the MAS for free. When I open the MAS while holding down the Option key I can download Lion but it will charge me for it. Is there any way I can download Lion from the MAS without paying for it? Since it already came with my new Mac Mini 2011 this should be possible I guess?
    And will I still be able to download the iLife '11 apps (iPhoto, iMovie and Garageband) for FREE that came with my new Mac Mini when I do a fully clean install as described above? Thanks in advance.
    Greetings
    Jocau

    After doing some research, it seems that there are only 2 WAYS to do a complete reinstall of Lion on the Mac Mini 2011 without paying for the Lion download in the Mac AppStore (i.e. recreating every partition, also the Recovery HD partition, from scratch e.g. when installing Lion on a clean HDD/SSD).
    1) COMPLETELY clone the Mac Mini 2011 HDD including all of its partitions to an external drive and restore it when you want to do a complete reinstall.
    2) Use the LION INTERNET RECOVERY feature built-in into new Macs that ship with Lion (this feature is present in new Macs starting from the Mac Mini 2011 and Macbook Air 2011).
    OS X Lion: About Lion Recovery 
    Lion Internet Recovery
    If you happen to encounter a situation in which you cannot start from the Recovery HD, such as your hard drive stopped responding or you installed a new hard drive without Mac OS X installed, new Mac models introduced after public availability of OS X Lion automatically use the Lion Internet Recovery feature if the Recovery HD (Command-R method above) doesn't work. Lion Internet Recovery lets you start your Mac directly from Apple's Servers. The system runs a quick  test of your memory and hard drive to ensure there are no hardware issues.
    Lion Internet Recovery presents a limited interface at first, with only the ability to select your preferred Wi-Fi network and, if needed, enter the WPA passphrase. Next, Lion Internet Recovery will download and start from a Recovery HD image. From there, you are offered all the same utilities and functions described above.
    As with the Recovery HD, reinstallation of OS X Lion from Lion Internet Recovery requires an Internet connection. See "Supported network configurations and protocols" below.
    Restoring iLife applications after Internet Restore of OS X Lion
    If you reinstall Lion on a new Mac that shipped with OS X Lion installed, on an erased or replaced hard drive, you can download iPhoto, iMovie, and GarageBand from the Mac App Store.
    After installation, start from Lion.
    Double-click the App Store icon in the dock.
    Enter your Apple ID and password.
    Click Purchases.
    If you haven't previously accepted your bundled iLife applications within the Mac App Store, you should see your iLife applications appear in the Accept portion of the screen. Click Accept.
    You may be asked for your Apple ID and password once again. Your iLife applications now move to the Purchased section. These applications are part of the software that came with your Lion based computer. Your account will not be charged for them. Click Install to compete installation of your applications.
    Source: Lion Recovery
    It's a bit sad that these seem to be the only 2 options. Lion Internet Recovery is the preferred one here since my monthly internet traffic limit isn't a problem (but my download speed is). This problem could have been easily solved by Apple by just checking the system specs or serial number when trying to download Lion from the Mac AppStore. By using one of the 2 options in my previous sentence the Mac AppStore could see that I have a new Mac Mini 2011 that ships with Lion which would give me the option to download Lion from the Mac AppStore for free and eventually create a bootable USB thumb drive of it.

  • In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

    In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

    Yes, junker thumb drives pour like rain in the market.  
    Which makes are working on your Air, and which arent?
    Stick to Sandisk and a couple of other reliable mfg. of memory sticks

  • WinXP 32- installing with drivers on USB thumb drive

    So I just recieved my D10 SATA today and I'm trying to install WinXP 32, but I can't seem to get the "USB thumb stick driver fix" solution to work. I just have just one SATA hard drive in the machine currently, and I have the dvd-rom plugged in to the SAS, as mentioned on the boards.
    SATA is in compatible mode, the LSI SAS controller is enabled (for the dvd). I loaded the Intel Matrix... and LSI drivers on a USB thumb drive as well as on a Sony Memory Stick (I have the card reader). Boot from the CD, push F6 when prompted, but when it gets to the screen where i'm supposed to navigate for the F6 drivers, it just says "windows can not find floppy disk... etc". If I continue with the installation without the drivers, it'll BSOD (unsurprisingly).
    I've tried every solution and fix I've read on the boards, and I can't seem to get the thumb drive option to work. The machine I'm on right now doesn't seem to like nLite, so slipstreaming seems to be out of the equation for the moment.
    If I disable the LSI controller and plug the dvd-rom into the SATA port, when it's in compatible mode, it won't find the dvd rom, which of course means I can't boot from CD. I'm a bit stuck as to how everyone's been able to install the drivers from a USB drive, so any advice would be greatly appreciated.
    I'm sorry for the long first post, but after reading some threads on this forum, I figured a detailed descreption of my problems would be best. Thanks in advance!
    Message Edited by 81dollar on 08-08-2008 03:28 PM

    In the BIOS boot sequence make sure diskette A is on the "not included in boot sequence" category. Also, try disableling Deskette Drive A from the Devices tab (i think it is). I doubt this will work since I ran into the same exact issue as you. Your best option will probably be to integrate the drivers using nLite, see my thread on integrating drivers using nLite (Method 2, second post). Hope this helps.

  • USB thumb drive crashes MBP and PowerBook G4

    Hi!
    I have a USB thumb drive. It mounts on the Desktop (as two drives, which is not strange because it has both an internal 6 MB of memory and a 2GB SD card) and I can open them. But if I attempt to copy a file either to or from the drive, the Finder hangs forever.
    This problem exists both on a shiny new MacBook Pro with 10.4.7, and a PowerBook G4 with 10.3---in either case, I must hard-reboot the machine.
    DiskUtility says that the drive checks out OK.
    Any thoughts? I tried reformatting the thumb drive, which worked temporarily; but when I added a file to the drive on another machine and tried to transfer it to the Mac, the thing hangs Finder again.
    I don't have any problems with the drive on PCs, and I don't have the problem with other USB drives on the Mac.
    Xcott

    It sounds like the file system is corrupt. I am assuming it's FAT32. I would reformat the drive partitions on a Windows machine and see if that helps.
    Also, because it's a dual, you might want to make certain that you do not plug it into a hub or a keyboard but directly into your Mac's USB host port. It may need additional power...
    Good Luck!

  • USB Thumb Drive Size for Windows 7 Profession​al Image

    I have a ThinkPad X100e running Windows 7 Professional 32-bit.  Can someone please tell me what the smallest size USB thumb drive I can use to create the installation/recovery image from the hidden partition using Rescue and Recovery?  I cannot seem to find that information in the Help menu or in the online FAQs or Knowledgebase.
    Thanks in advance for your assistance!

    it makes 3 DVDs so maybe 15 GB
    Thinkpad R61 7733-1GU
    Thinkpad X61T 7762-54U
    Thinkpad X60T 6363-4GU
    Did a member help you today? Thank them with a Kudo!
    If a post answers your question, please mark it as an "Accepted Solution"!
    Regards,
    GMAC

  • I have a new USB thumb drive that works in my 2010 iMac but not in my 2012 MacBook Pro

    Today I purchased an 'autodrive' usb thumbdrive at Staples.  The drive works fine on my mid 2010 iMac, and my Asus Netbook running Windows 7.  However, it is not recognized at all by System Information or Disk Utility on my mid 2012 Macbook Pro.  Both Macs are running Mountain Lion 10.8.2.
    If I connect my 2 year old SanDisk USB thumb drive to the same USB port on my Macbook Pro, it is immediately recognized and a finder window opens.  The SanDisk drive is also recognized properly by the iMac and the Netbook.
    Is there any way to further debug this issue to get a better idea of why the device is not being recognized by the Macbook Pro?
    Thanks,
    -Scott

    I am having this exact same problem with my New MBP 15" quad core 2.6GHz i7 on 10.8.2.  I have other thumb drives that work, but an older thumb drive that works on my prior MBP 15" 2.7GHz dual core i7 on 10.7 and XP and Windows 8 laptops isn't recognized at all by the newer MBP.   This thumbdrive is only 256MB and may be USB 1, but USB 1 stuff should work on a USB3 interface unless it's a bug.  I've freshly formatted the drive and tested it with disk utility on the older MBP, so it's an issue with the newer Mac's USB controller or MacOS 10.8.2
    I suspect a bug.

  • Encrypted Live System on USB-thumb drive

    Hey all,
    I am fed up with the different systems on various computers. So I want an Arch Linux Live System on an USB thumb drive I can carry around and plug into the computers I stumble upon.
    I want to be able to have some data (emails, favourites and so on) and some additional programs (vlc, Open Office, ...) on the live system so I can use them. And there are the upgrades for Arch I don't want to mis
    As I am known to lose small things, thumb drives, I want to encrypt that system.
    I have already an Arch install running on my PC and I would like to stick to Arch. Will Arch be able to adapt to various different PCs? I was thinking about using Ubuntu, because it will run on almost anything but, well it's not Arch...
    I would like to have at least two partitions:
    - One encrypted Live System where I can store personal data
    - One partition where I can store other information and which I can read from any Linux/Win32 computer (most probable NTFS)
    - Is a Swap Partition usefull or will it just wear down the drive? What can I expect if I don't have a Swap?
    So where shall I start? Partitioning the drive?
    - Boot sector 150 MB
    - Swap 1 GB
    - System  5 GB
    - Data Rest
    Has anybody tried this? Better yet, succeded?
    So I have a 16GB thumb drive here waiting for your suggestios!
    Thanks!

    I don't have it encrypted, but I made a simple version of what you proposed -- 1st half of 8gb drive is NTFS (though I'd consider Vfat after reading up some more). 2nd half is bootable partition w/ Larch install. Works great! Larch takes a bit to figure out, but it's not too hard. No boot or swap parititions.
    Good luck!
    Scott

Maybe you are looking for