Usb vista to mac protocol problem

I'm running windows vista on a virtual machine( VirtualBox) mac snow leopard as a host. Also I'm running a program with chip FTDI
PRODUCT_NAME="FTDIChip CDM Drivers" FILE_VERSION="2.00.01.1 built by: WinDDK" ORIGINAL_FILENAME="ftserui2.dll" INTERNAL_NAME="ftserui2"
When I sync the program prompt an error 9 subscript out of range, it seems to me a problem with usb vista to mac protocol problem.
Any Ideas how to fix it?
Thank you,

Yes, I have the same problem and so does another person.
http://discussions.apple.com/thread.jspa?messageID=10939362

Similar Messages

Trying to record the school band using Garage band and a Pevey PV14 USB. Have connected the mixer to the Mac using a standard USB lead (is that a problem) but after enabling multitrack option we get the error message

Trying to record the school band using Garage band and a Pevey PV14 USB. Have connected the mixer to the Mac using a standard USB lead (is that a problem) but after enabling multitrack option we get the error message
'Can't enable track for recording. Input channel already in use.'
What are we doing wrong?
Thanks

skim this tutorial:
http://www.bulletsandbones.com/GB/Tutorials.html#bsqrecordmultipletracks
(Let the page FULLY load. The link to your answer is at the top of your screen)

When I connect my iPad with usb to my mac the iPad gives me a "blinking" message asking to trust the computer. Problem is it does not give me enough time to select yes. What am I doing wrong? Help!

When I connect my iPad with usb to my mac the iPad gives me a "blinking" message asking to trust the computer. Problem is it does not give me enough time to select yes. What am I doing wrong? Help!

Everything that you sync to the iPad is done through iTunes or from downloading from the cloud if they are iTunes purchases or through iTunes Match, if subscribed.
It is also not possible to transfer music or certain other files though Bluetooth between other iPhones or Android devices. You can transfer between iOS devices, pictures through devices that are Airdrop capable.

Problema con USB en formato mac os plus

Hola, el problema que tengo es que he formateado un usb a formato mac os plus con registro encriptado y no me acuerdo de la clave.
La clave la generó el generador de contraseñas de mac osx.
He probado intentar formatearlo, pero no puedo formatearlo porque aparece en la utilidad de discos bloqueado.

Lamentablemente, una vez se le olvida la contraseña de una imagen con formato Utilidad de Discos, que son básicamente de suerte.
Unfortunately once you forget the password on a Disk Utility formatted image, you are basically out of luck.

Need help on USB hub for mac air 13 inch (2 external hardisk and Iphone)

Hello everyone, I am a new macbook air user, and currently using 2 external hardisk of 1TB and 2TB. I am looking for usb hub that support both of my external hardisk, ethernet and iphone too. The problem is, limited usb hub for mac air and bad review on balkin product, any advice for me?
One more thing, I just moved from window to mac for the first time, and bought Western Digital 2TB external hardisk, the problem is, I can't save any video/audio file that I downloaded from internet in macbook to be transfer/move to this WD 2TB external hardisk, except for back up and time machine. It refuse to except any file that I try to move in to the external hardisk Can anyone help me? compactibility problem?

First, I have not found any of my hubs to have an issue with my MBA. Just make sure that if any peripherals you attached to the hub are adequately powered. Either by having the hub independently powered, or the devices having their own power supply.
The drive problem you have may be due to the file formatting. If this drive is formatted NTFS, then in many cases you can write to it using a network protocol, but OS X can't write to it if attached directly to the computer, e.g. USB, SATA, FireWire. You will neeed to either format the drive as a HFS+ drive, or use software that enables OS X to write directly to t a NTFS formatted drive, such as NTFS-3G. DISCLAIMER: As the information you provide for your circumstances is limited, this is but one suggestion amongst many, that explain your situation.

Mac mini core2 duo 10.7.2 not seeing files on usb external drives - mac formatted - ownership ignored- until finder refresh - any idea

finder has problems showing folders& files on external drives on mac mini with 10.7.2
this is affecting 2 external usb drives both mac formatted - ownership ignored
i click on the drive and see nothing
a refresh of the finder window will make the files appear
if i click on a disclosure arrow, the arrow turns down but no files are displayed
if i double click on the folder it opens that folder in an empty view - a refresh will bring the files visible
interestingly if i eject the drive and plug back it , it will usually display the contents of folders already visited last time but not folders i hadn't looked at - they require a refresh
programs such as iTunes can link to those files when they are not visible in finder
anyone else run into this - any suggestions
oh and drives seem to be working fine on my macbook pro with 10.7.3
cheers folks
Simon

John -I'm pretty sure it the mac mini thats having the issue
the two drives - each with their own cable - seem to work perfectly with my other mac
the mac mini is having no problem reading the files itunes and other programs access the files on the drives without a problem
its just the finder is not displaying the files without a refresh of the view
but thanks anyway

Two Cards/3 Monitor Setup w/ Vista + Bootcamp, 7300 GT problems

Hello all, I have a Mac Pro 32-bit OS running with Intel Xeon 5150 2.6 x2, 5 GB RAM, and originally, it came with the XT1900 video card. NVidia 7300 GT won't install in Vista! I wanted to run 3 displays, so I read around that people were adding an extra 7300 GT to accomplish this. I've ordered and installed one, but when using Vista via Bootcamp, the card simply will not install. I've checked device manager, there is an error code (43) saying it failed to start. I tried uninstalling drivers, reinstalling, patching, getting everything updated latest from nVidia for Vista, but to no avail, I've hit a dead end here. Also, I tried unplugging the XT1900 and running with just 7300, still didn't work. The card is installed in slot #4, and the original XT1900 is still in the #1 slot.
Anyone know how to get the card installed under Vista (I have SP1 too)? Everything runs fine in OS X Leopard, but mainly, I use windows so I was more concerned about that. I've never had this many problems getting a piece of hardware to install, EVER.
Also, I ordered the MAC version upgrade card whenever I purchased the 7300 GT. All the software updates and flashes, I was downloading for "Vista" Was that a problem or the right choice? If all else fails I may just ditch the 7300 and get another Xt1900 to roll with two. Hopefully that setup won't bunk out. Any help appreciated!
Message was edited by: CALfire

Problem is Windows not liking to mix two brands, ATI and Nvidia.
Check out the ATI Radeon 3870 instead of another X1900.
http://www.barefeats.com has graphics benchmarks in OS X and Vista.
I used 7300GT and 8600GS together in Vista. The 8600 is only seen and useable in Vista but does not interfere in OS X (just black). eVGA seems to be most compatible PC card on Mac Pro.
You could run 7300GT and order the 8800GT from Apple, the one for just the pre-2008 Mac Pro, which would get along and work also and nice card in Windows but iffy in OS X and weak drivers.
http://www.barefeats.com/harper11.html Vista performance
http://www.barefeats.com/harper15.html legacy 8800GT
http://www.barefeats.com/harper17.html 3870 in Windows
http://www.barefeats.com/harper18.html 3870 in OS X
The 3870 you have to install the drivers, reboot once, let the drivers load into cache, and then switch over - for card to work properly in OS X.

Network between Vista and Mac

i'm trying to create a network between a Vista desktop and my Macbook Pro for files and printer sharing.
after lots work with setting on Vista, I now can enter in MacbookPro folders from Vista. the problem is by Mac side: i can't find the printer connect on Vista (and shared), and the icon of PC don't appear on Finder, so i can't enter on Vista's folders. the problem with file sharing is strange, cause only one time, today, icon of PC was appeared on Finder (come back to Stop of Mac)..... i've traied with the same method another times, without success...
I don't now what to do. I hope someone help me
Message was edited by: -Slevin-

I have limited knowledge but will try to help you as I have battled through this myself recently...You will lose nothing if you give it a try!
In System Preferences open the Sharing folder. Check the boxes to enable 'File' & 'Printer' Sharing. In the same open window select 'Options'.. Here I have Share files and folders using AFB and (importantly) also Share files and folders using SMB. - 'on' should be checked and 'Account' should i believe be the name assigned to your Macbook. - select 'Done' and then also close the 'sharing' window in sys preferences to take you back to the desktop.
In 'Finder' select the 'Go' option in the toolbar. Select connect to server from the drop down menu. You now need to enter the server address which will be the name of your Vista Pc - enter as follows: smb://(your vista name).. you may have to also enter the password for the Vista machine if it is configured in this way. ( It has been a while since I completed this so a little rusty here!)
If you have entered the correct information when you hit 'Connect', your Macbook should find your Vista desktop that has previously not been appearing in your Macbook 'Sharing' section - this was the issue that I was originally experiencing. You should now see the Vista machine in the Sharing section of your Macbook.
If this has been successful to here... This will enable access to try to solve the printer sharing problem? I think this one is beyond me as there are so many different configurations/installation options dependent upon the type of printer and network configurations.
It is possible to configure your Macbook to automatically find your Vista machine at startup if it is not found as a matter of course, which I perceive to be the case here... Try this to automate connection at startup..
Go to Sys Preferences and sect 'Accounts' you may have to enter your password to initiate changes. Making the assumption that you are connected now to your Vista machine and it is showing in the 'Shared' section of 'Finder'- select the 'Login Items' option and then select the '+' under where it states 'To hide an application when you log in etc etc.
From the window that opens you will now select your Vista machine from the left hand folders menu. when done click 'Add' and close windows to return to your desktop. Re-start the Macbook to check whether the Vista machine will now load to the Mac automatically at startup.
I hope this works for you as it has for me - The non discovery of the vista machine by the Mac was driving me round the bend

How to install USB card in Mac OS 8.6?

Recently, i buy a new printer. the printer only can use USB connection. My MAC is MAC 8500/1800. It is no USB port. i added a USB card. But it is not work. I find information on internet. It need installed a software(USBSupport1.4.1smi.bin). I downloaded the software. But it can not open. i hope some people can help to solve the problem.
Thank you very much for your help.

Hello tytom2003,
Welcome, and Happy New Year!
First, make sure your printer and USB card are Mac compatible.
Second, you will probably have to re-install your Operating System in order for your Mac to "see" your USB card. You cannot install the proper USB and USB support extensions by downloading them, because your Operating System will not "see" them, will not recognise them.
You should perform a "clean reinstall" (also known as "archive and install") from your original installation CD - or from a retail, full install CD, with the USB card installed in its PCI slot. Your Mac will now automatically "see" or recognise the USB card, and will see the need to install the USB extensions.
By doing a "clean install", you will have a newly installed System Folder and the old, disabled 'Previous System Folder' next to it. You will not lose anything, as all your old applications and documents will be saved in the 'Previous System Folder' where you may retrieve them and drag them over to your new System Folder.
I assume you are running OS 8.6, but it doesn't really matter. The OS CD will install the correct USB extensions. (An OS9 CD might install 1.4.6 extensions - whatever it installs should work).
I did not have your exact model, but rather a 7300 and several beige G3s, but the procedure is all the same.
It is also possible to do a 'Custom Install' or install by 'Tome Viewer' utility.
Let us know if it works.
I hope to have been of some help. It will have been an honour.
Jon
Message was edited by: Jon Smith

1 Vista, 2 Mac, 3 XP - Vista Prints, Macs Print, XP No Print!!!!!!!!!!!!!

ok so in my house i have 1 vista, 2 mac;1 w/ windows, 3 xp;1 wired 2 wireless, all setup with a pretty decent average network: 1 airport extreme w/ 2 printers, airport express bridged w/ home stereo and 1 printer.
Heres the problem:
the vista,2 mac, and wired xp can all print to all 3 printers using bonjour for windows, however the 2 wireless xp systems can not! I dont get it. if you have any ideas please try and help
Also my extreme no longer for some reason does not show up in airport admin utility but the express does if you think that might have to do with it please give me some help with having me extreme be seen again!!!!!!

Abhigyan,
The Java Script hasn't changed in 2 years. It was developed by an Adobe Partner. Adobe Reader and Acrobat have changed.
I'll try to step through the script but haven't had much luck in past.
Here are the lines that Reader likely is throwing the error:
oDoc.print(pp);
if ( bCloseNoSave ) oDoc.closeDoc({bNoSave:true});
As I stated, it works in previous versions of Reader (9.0 through version 9.3.2). The issue began when Adobe released version 9.3.3.
Doug

How can I create a new folder in an external disk that is connected via USB to my Mac?

How can I create a new folder in an external disk that is connected via USB to my Mac?

Just like you would create a new folder anywhere. Open the drive's icon from your desktop or the Finder, and click shift-command-N. (Or use the Finder menu if you prefer - File - New Folder).
If you can't create a folder, your drive may be the wrong format (you can't write to a Windows/NTFS formatted drive, for example). You'll have to back up any files you have on there, and then use Disk Utility to reformat it to Mac Extended (if it will only be used on a Mac) or MS-DOS format (if you want to share it with a PC).
Matt

Applet in Apple Mac OSX problem

Hi all,
have developing an applet long while using WinXP platform, everthing seem ok, but when i try over Apple Mac OSX, i has a loading problem saying that init failed to load ArrayList as error message said:
ArrayIndexOutOfBound, 0...
but when i debug print out the ArrayList content and its length, i'm sure that this ArrayList is NOT NULL and its length is NOT ZERO either. what is happening here? oh, ya, this only happen in Safari, in FireFox for Mac no problem, even Camino also pass the test, why? anyone have idea about this? because i'm new to Apple Mac.
also, there is another question whereby, when i use FireFox for Mac to load the applet, the applet load seem no problem but it just can't display properly. what i mean is that in Windows platform (IE6), this applet show entire applet successfully, but when i try it in Mac, it show only a part of applet without any error, but when i try to refresh the page, applet is now successfully show, why?
lastly, when a button of an applet being click and this will bring a new window with some parameters value, its work on IE in Windows platform, why it won't work for FireFox or Safari for Mac? i see prompt out saying is security problem, is there any workout of this? thanks. to summary out of junk above:
_______________________________FireFox_____Safari_____IE
_______________________________Win | Mac_____Mac____Win
1. load applet for 1st time___________OK_|_NO_____FAIL____OK
2. refresh applet after 1st load failed___OK_|_OK_____FAIL____OK
3. when applet button click (security)___OK_|_NO_____-_______OK
p/s: all above test was using same applet with same parameter and value.
below is the sample i capture from Apple Mac just now:
http://img.photobucket.com/albums/v660/ahbeng78/Apple_Mac.png
Message was edited by:
ahbeng78

i has a loading problem saying that
init failed to load ArrayList as error message
said:
ArrayIndexOutOfBound, 0...Well, post the stack trace.
but when i debug print out the ArrayList content and
its length, i'm sure that this ArrayList is NOT NULL
and its length is NOT ZERO either. You can still get an out of bounds exception with those conditions. The list could exist, its length could be N, but you're trying to dereference position N + 5, for example.
try it in Mac, it show only a part of applet without
any error, but when i try to refresh the page, applet
is now successfully show, why?My guess is that you're not calling repaint() when you should, but that's just a guess.
lastly, when a button of an applet being click and
this will bring a new window with some parameters
value, its work on IE in Windows platform, why it
won't work for FireFox or Safari for Mac? i see
prompt out saying is security problem, is there any
workout of this? thanks. to summary out of junk
above:Often you can sign applets so they can do things that unsigned applets aren't allowed to do.
Maybe you're making some kind of security mistake that Firefox and Safari are (properly) catching but IE isn't. In any event, post the error message.

I have MacAir with OS 10.8.4, how can I cancel the automatic link of my USB flashdisk to Mac instead of BootCamp, since I have one time press the ALT key before choosing "MAC" or "BOOTCAMP". Thanks

I have MacAir with OS 10.8.4, how can I cancel the automatic link of my USB flashdisk to Mac instead of BootCamp, since I have one time press the ALT key before choosing "MAC" or "BOOTCAMP". Thanks

That only happens when you are running Windows in a Virtual Machine with OS X as the host. Shut down the VM and restart your Mac. Once the VM is running again and you insert a USB flash drive you should get that prompt again.

I have a MacBook Air which has a camera installed in it but it doesn't seem to work for some things like iMovie and my security camera for emergencies. It does however seem to work for Photobooth and facetime. Please write back and help my mac's problems.

It'd be nice if you could help me with my mac's problems so I can start using iMovie and my security camera again. Thank you too all that answer.
--JaySwanny

User Password Reset

I have a carillon 25 keyboard (bad choice, I know) and I can't get it to communicate with my mac at all! I'm running logic pro 9 and reason 5. I get signal in from my M Audio trigger finger so I know it isnt an entirely mac based problem. Thanks!!!

I have a carillon 25 keyboard (bad choice, I know) and I can't get it to communicate with my mac at all! I'm running logic pro 9 and reason 5. I get signal in from my M Audio trigger finger so I know it isnt an entirely mac based problem. Thanks!!!

Well, how have to determined no signal is being recieved to your mac?
Have you got something that shows the actual signal? Or have you just been trying to control a VST? What software are you using by the way?
I personnally went with a AKAI MPK25, because it's made already mapped for logic & ableton etc, so it just makes things incredibly easy.
I would suggest you return it if you can as a dead unit & perhaps look at something else a bit easier?
Otherwise, if you just want to get this working we can have a look a bit deeper.
And driver? OS X driver?

Usb vista to mac protocol problem

Similar Messages

Maybe you are looking for