Usb wire and itunes symbol

When I turned on my apple tv box today there's just an itunes symbol and usb wire symbol.
Do I need to connect the apple tv box to my computer with usb cable?

Yeahyou Read the signs correct

Similar Messages

  • I was recently given an ipod touch and the only screen it will show is a usb cable and itunes symbol. I've tried the troubleshooting stuff on this website but it still won't work. Any ideas as to how i can fix this?

    My Ipod touch only shows a usb wire and itunes symbol when i turn it on. it does not show up on my itunes or in my computer. ive tried the troubleshooting stuff(reseting the ipod, reinstalling the newest itunes, restarting the computer) and nothing has changed. my ipod shuffle connects to my itunes just fine though.

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • I have just purchased an iphone today and it is coming up with a picture on the screen of the usb connector and itunes symbol. It also says that I now have no service and can only make emergency calls

    I have just purchased an iphone today and it is coming up with a picture on the screen of the usb connector and itunes symbol. It also says that I now have no service and can only make emergency calls

    Just a thought, but maybe consider returning the device.  Seems it might be a bit too complicated for you.

  • Usb cord and itunes symbol on screen

    usb cord and itunes symbol frozen on screen

    Connect the iPod to your computer and restore via iTunes.
    iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad

  • I am seeing a usb cord and itunes symbol?

    I restarted my Ipod after sitting for months and now I see a usb cord and Itunes symbol. I've trying everything to my knowledge?

    The screen is telling yo to connect the iPod to your computer and restore via iTunes
    iTunes: Restoring iOS software

  • Ipod is showing usb cord and itunes symbol

    I have tried restoring it but nothing happens.  Just stays on this screen. 

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • TS3694 PlEASE HELP ME RESTORE MY IPAD 2. JUST SHOWING USB AND ITUNES SYMBOL TO CONNECT. iPad 2, iOS 7.0.2, fix it

    PlEASE HELP ME RESTORE MY IPAD 2. JUST SHOWING USB AND ITUNES SYMBOL TO CONNECT.
    iPad 2, iOS 7.0.2, fix it

    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
    iTunes free download from www.itunes.com/download
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • I have an ipod 1g and it has the usb and itunes symbols but when i connect it to itunes it say unnable to connect ipod becuase you need to type in the passcode but i cant because of the symbols. Help?

    So my ipod (not sure if its a 1st or 2nd g) but it has the usb and itunes symbols on the screen but when i plug it into the computer, it says, "unable to connect this ipod. type the passcode on the ipod on the ipod to connect" but i cant because of the symbols. what should i do?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen        
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • HT201406 when ipod is switched on the screen shows a usb cable symbol and itunes symbol, why is this

    when ipod is switched on the screen shows a usb cable symbol and itunes symbol, and it wont let me switch it on even though it is fully charged up, why is this?

    It is either an erased iPod or an iPod that has a problem. The screen is telling you to connect the iPod to your computer via the USB cable and restore via iTunes. For how to restore see:
    iTunes: Backing up, updating, and restoring iOS software

  • HT201210 i updated my iphone 3gs to iphone 6 . while installing the software it gets error and closed. then i restored my previous version. when i turned on the phone it gets usb and itunes symbol on screen. when i run itunes error is coming like server c

    i updated my iphone 3gs to iphone 6 . while installing the software it gets error and closed. then i restored my previous version. when i turned on the phone it gets usb and itunes symbol on screen. when i run itunes error is coming like server contact problem. what can i do to start my phone????  plz help me

    I will need a little bit of information about your phone. What kind of error are you getting?

  • Stuck in usb and itunes symbols

    i was updating my 3rd gen itouch and it suddenly crashed! now my itouch is stuck in the usb and itunes symbol... what can i do to fix it? thanks!

    - Reboot the computer.
    - The connect the iPod to the computer and try to restore.
    - Then see if manually placing the iPod in Recovery mode will allow a restore.
    - Next try DFU mode and restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • HHola I update my Apple TV and I am frozen screen with the photo of Apple TV and iTunes symbol and a cable connected from one to another device, it happens and how to fix it Apple TV

    HHola I update my Apple TV and I am frozen screen with the photo of Apple TV and iTunes symbol and a cable connected from one to another device, it happens and how to fix it Apple TV

    Welcome to the Apple Community.
    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Devices list, and then click Restore.
    (You may already have a micro USB cable if you have a camera or other digital device)

  • Hi, I have a problem with my ipad, I want to restore it but I can not. When I plug the ipad (off) it is not recognized by itunes, I turn the ipad, There are apple and the apple after you see the usb cable and itunes logo for just 1 minute and turns off an

    Hi, I have a problem with my ipad, I want to restore it but I can not. When I plug the ipad (off) it is not recognized by itunes, I turn the ipad, There are apple and the apple after you see the usb cable and itunes logo for just 1 minute and turns off and is no longer recognized by itunes.
    thank you for your help.

    Hi there beni_m,
    You may find the troubleshooting steps in the articles below helpful.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    -Griff W. 

  • HT201413 I have restored and updated my ipod from recovery mode however I still have the usb cord and itunes icon on the ipod when it is switched on. How can I get my ipod to work again?

    I have restored and updated my ipod from recovery mode, however I still have the usb cord and itunes icon on the ipod when it is switched on. How can I get my ipod to work again? I have updated and restored 5 times! When connected to itunes it only shows the summary page saying ipod in recovery mode.

    Fixed it!
    1. Made sure itunes software was up to date
    2. Pressed and held 'home' button and 'on-off' button at the same time for about 10 seconds till ipod reset (I hadn't done this step previously)
    3. Connected to itunes
    4. Pressed restore and update ipod
    Update successful and ipod taken out of recovery mode

  • My i pod shows my charger and itunes so i download i tunes. But itunes said i had to do my passcode but the charger and itunes symbol wont go away long enough for me to enter my passcode! what do i do?

    My ipod shows my charger and itunes, so i download itunes. But then itunes says i musst enter my passcode on my i pod but the charger and itunes symbols wont go away long enough for me to enter my passcode. what should i do?

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Maybe you are looking for

  • Problem when getting the choice clicked by the user on a confirmation dialo

    Hi I want to prompt a confirmation Dialog, before deleting from a table, with yes,no,cancel options. Then I created 3 event handlers 1.EmpRemove-parameter is 'cosid'   code:      public void EmpRemove(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent

  • OJMS Connection Factory Error

    Hi, (Platforms: OC4J developer preview 4, JDev 10.1.3 EA, Database :Oracle 10.1.0 ) I have tried to implement the JMS provider (OJMS) according to the following document : http://www.oracle.com/technology/sample_code/tech/java/codesnippet/jms/datasou

  • Using frames in HtmlDB page

    hi all can you please help me with how to use frames in an htmldb page with a tabset . i have a page in one tabset application i want to divide the page into frame and run a url in one of these frames thanks

  • Price in SC -

    Hello Experts, We have created Sc, and price flows from Material Master moving average price. As i did run report EBP_GET_BACKEND_PRICE. but in Material master that moving averrage price for that Product is 400. on SRM front when it is comming it get

  • Wifi Upgrade to Intel Wifi Link 5300

    I bought my Lenovo T500 last year in summer (2009). It came with a b/g wifi card and I want to upgrade it to Intel Wifi Link 5300 but it seems lenovo.com has stopped selling this card. I also heard that not all 5300 cards are compatible with Lenovo T