Usb wireless adapter for solaris 10 on sparc platform

Hi,
First and foremost, I hope that this stands in the right place.
I need to configure my Sun Fire V240 to connect to my wireless network (wifi).
Just wondering do we have the list of usb wifi adapter (and driver) that can work in Solaris 10 on Sparc platform?
Or, can I have the list of Solaris supported PCI wifi adapter and driver? It would be great if instruction included.
Thanks in advance.

Hi guys, I also had this situation and since I was not able to convert the package to a datastream, I downloaded it from http: //www. sunfreeware. com/mozilla .html
They also provide some readme files that can be of help.
Once you have the datastream package you can install using pkgadd utility.

Similar Messages

Which is the best USB Wireless Adapter for a MacBook?

I have a MacBook Pro 13" (Late 2011), nowadays I have a lot of problems with the Wi-Fi connection in my University (translated):
PHY mode: 802.11n
Channel: 1
Country code: MX
Network type: Infrastructure
Security: WPA2 Enterprise
Signal/Noise: -59 dBm / -86 dBm
Transmission speed: 52
MCS index: 5
I am not the only one with this problem, almost every Mac and computer has the same problem, the question is "What is the best Wi-Fi USB adapter I can buy to improve my connection?". I know there are a lot of answers to this question the problem is many of them are very outdated.
Finally, the problem only happens with this network, my home connection. Some people using PC's have bought Wi-Fi USB adapters and their connection improves a lot.
Thank you.

Give the Edimax EW-7811Un a try. I am curious if it solves your wifi problems!

Will airport work with a simple USB wireless adapter?

I'm considering setting my folks up with one or maybe two airports for wireless audio through their house. They don't have any wireless gear at the moment. Will it be ok to buy a cheap USB wireless adapter for their PC to transmit to the airports?
I'm considering this one: http://www.ebuyer.com/product/107691
My worry is that it might not send a strong enough signal. What do you reckon?
thanks!

I don't have first-hand knowledge of this particular USB wireless adapter, but it should be compatible with the AirPort base stations, as it is 802.11b/g-compliant and supports both WEP & WPA encryption.

Issues with usb wireless adapter

Hi
Please excuse my ignorance.
I have an imac (about 2 years old) with a built in airport card. I am trying to use a usb wireless adapter. It has a realtek rtl8187. we have a wifi network here that works with my pc using this adapter but i cant get it to work on the mac. You have to sling the adapter on the window sill but it picks it up fine.
I have installed the supplied software (obviously the mac one!) and it installs the software and driver. After i have restarted, and plug the thing in, it tells me to turn on my wlan card on the supplied software?? It shows up in the listing on network settings as ethernet adapter ((null)). I cannot find any setting to turn on my wireless card, i thought that was airport?
The airport picks up the network but the signal is too weak to connect, hence the adapter with a bit more guts....
I have this beautiful mac, colecting dust and am having to use a pc!
If i connect the usb adapter without installing the software, it constantly has a box popping up in network settings saying that an external device has changed settings! it doesnt stop doing it, until you delete the location...
Can anyone help? I may be being thick and dont have a wlan card or something or airport will not allow me to use this thing. I only just started getting into macs when i moved to spain, where it has sat colecting dust for 3 months.
I would appreciate any advice.
Thanks
Richard

TNHusker, welcome to the forum.
Cisco makes a router that is good for two-story homes. I have used it for several years. My router / hotspot is on the second floor and my Blu-ray player and laptop are on the first floor. Both work extremely well with the router. They also make a USB, AM10, that works very nicely with a desktop without a wireless card.
I have had a few problems with both, but have always been helped successfully by Cisco Customer Service. They are very good.
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

License for cross-compilation for solaris 10 sparc on Linux x86

I'd like to do cross-compilation for solaris 10 sparc on Linux x86 using gcc (for linux). To do that, I have to copy libraries (/lib/64) and includes (/usr/include) from a sparc machine to my linux machine.
The compilation will be run on about (up to) 50 Linux machines (by various developers). We also have 3 solaris-10-SPARC machines.
I wonder if Solaris license allows me to copy the includes and libs to perform compilation elsewhere.
I also checked "OTN License Agreement for Oracle Solaris", but it looks like Oracle allows for installing "the programs" on up to 3 machines, but I need it on 50.
Thanks for any suggestions or redirections to a proper place where I can get an answer.
Marek

When installing Solaris 10 01/06 on a Dell 1850 I receive an error message during the install saying "no disk found". I assume that the drive/controller is not recognized. The Dell 1850 is listed under the HCL for Solaris 10 10/06. I don't believe I can use the Solaris(TM) Device Driver for the LSI MegaRAID Adapter floppy with 1/06. I don�t have any other Solaris boxes up so I can�t build a jump start server. Any suggestions?

Need latest acrobat reader for solaris 10 sparc version

i need latest acrobat reader for solaris 10 sparc version
checked adobe site it is only avilable for linux and not for solaris, very strange

There's no version of Adobe Reader XI for Solaris.
The only versions you can download are legacy - see the complete list here: http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Unix

How about gccfss for Solaris x86/x64 platforms?

Subject says it all... it could make compiling a lot of code out there a whole lot easier!
Bob

I also desire gccfss for Solaris x86/x64 platforms .
In the interim I have downloaded the source and am attempting to create such a beast.
It is slow progress to fix the unexpected script breakage, but it seems to be going OK:
Problems:
1.): Issues like "-mtune=v9" and an "embeded spec" in gcc and cpp (from files
gccfss_src/build/gcc/gccspec.o and gccfss_src/build/gcc/cppspec.o).
2.): Use of OPTTABLE_H = $(srcdir)/config/target-option-table.h with SPARC specific
options throughout
EG:
#ifdef CROSS_COMPILE
#define NATIVE \
{ "-native", "-xtarget=generic" }, \
{ "-xarch=native64", "-Zarch=v9 -Zarchm64=v9 -Zm=64" },\
{ "-xarch=native", "-Zarch=v8plus -Zarchm32=v8plus -Zarchm64=v9 -Zm=32" },\
{ "-xtarget=native64", "-Zarch=generic -Zarchm32=generic -Zarchm64=v9 -xchip=generic -xcache=generic -Zm=64"}, \
{ "-xtarget=native", "-Zarch=generic -Zarchm32=generic -Zarchm64=v9 -xchip=generic -xcache=generic -Zm=32"}
#else
#define NATIVE \
{ "-native", "-xtarget=native" }, \
{ "-xarch=native64", "-xarch=native64 -Zm=64"}, \
{ "-xarch=native", "-xarch=native -Zm=32"}, \
{ "-xtarget=native64", "-xtarget=native64 -Zm=64"}, \
{ "-xtarget=native", "-xtarget=native -Zm=32"}
#endif
Thus, one would need to change:
{ "-xarch=native64", "-Zarch=v9 -Zarchm64=v9 -Zm=64" },\
to something like:
{ "-xarch=native64", "-xarch=386 -m64" },\
3.): Copy the "sparc_output_scratch_registers()" function from file
"gccfss_src/src/gcc/config/sparc/sparc.c" to "gccfss_src/src/gcc/tree-ir.c".
4.): Use the undocumented command line option "-frtl-backend" when this error
occurs during the build (a simple Makefile change):
`-mcpu=' is deprecated. Use `-mtune=' or '-march=' instead.
xgcc: SUNW0scgfss 4.2.0 has not been installed. Either install it or use -frtl-backend.
5.): More ...
All these issues occur because the scripts expect "--build=sparc-pc-solaris2.11" but
I configured using "--build=i386-pc-solaris2.11" . It seems like it is going to work
but I am yet to finish stage1 of the build (I do have a working "xgcc").
Rob

Time Capsule and USB Wireless adaptor for PC

I can't seem to find a USB wireless adapter that I can use to connect my Windows XP desktop PC with my Time Capsule/Airport. I have a Notebook PC that I was able to connect with no problem using my existing wireless PC card. I have tried several USB adapters for my desktop, but nothing sees my network. I've also tried to update to the latest drivers for my adapters. Has anyone else had this problem? If so, any answers?

There is no difference between the TC and other routers as far as networking is concerned. It is fully compliant to the usual standards.
Your wireless USB network adapters should work just fine. A lot will depend on how you have your TC configured. If it is setup for 802.11n only, then if your USB adapters are 802.11b or g, they won't be able to see it. If you have the TC's SSID disabled, they won't be able to see it. If you are using WPA2 and the USB adapters only support WEP or WPA security, they won't work either.
You typically have to find the lowest common denominator and configure everything based on that.

Do I need to buy wireless adapter for Equium A100-027?

Hi, don't want to seem a complete idiot but, can anyone tell me if I need to buy a wireless adapter for my Equium A100-027? Not very good with technicalities I'm afraid and don't want to buy anything I don't need!!! Thanks

Hi mate, no you dont, its built in, its on the side were the cd drive is, near the two usb ports...
Message was edited by: GhostUK

My usb wireless adapter keeps disconnecting

So, I just bought this TP-Link TL-WMN721N 150mbps wireless adapter, and it has this issue. It keeps disconnecting, all the time, i've downloaded the latest drivers and i'm pretty sure it's not a malware problem, also tried connecting to different usb ports.
Any guesses?

Hi，
You can also temporarily turn off your anti-virus software, since some anti-virus might not recognize the new component installed.
I noticed that you've had the latest driver, did you get the driver by manually viewing the device manufacture website to look for the latest version?
This issue can also be caused by incompatibility, Please make sure the usb wireless adapter is compatible with your Windows version.
Please also reinstall the usb controllers as a test
First, please disconnect all USB devices and then perform the following steps:
1) In Device Manager, double click to expand "Universal Serial Bus controllers", right click on the Host Controller, click "Uninstall" and click "OK".
2) Repeat the step 2 to uninstall all items under "Universal Serial Bus controllers".
Then, restart your computer and your windws will reinstall all USB controllers automatically.
Yolanda Zhu
TechNet Community Support

My Bluetooth USB wireless transmitter for my portable speakers has quit working. Preferences says, "The selected device has no output controls", it used to work just fine. Can anybody help?

My Bluetooth USB wireless transmitter for my portable BT speakers has quit working. Preferences says, "The selected device has no output controls", it used to work just fine. The internal and a pair of wired external speakers work fine. Can anybody help?

Just tested something and it worked.
If I put the headphones all the way in, the mac recognizes it as a digital output.
But if i don't put it all the way in, it recognizes it as headphones and works perfectly.
It's probably this crappy headphones.
If anyone has the same problem, try this out.

Can I use a USB wireless adapter with my iMac G4 Flat Panel (it has no Airport card).

I have just salvaged an iMac G4 15-inch Flat Panel from the skip and now have it running Mac OS X Tiger 10,4. It has a 700mhz cpu, 80Gb hard drive and 512mb of Ram. No airport card is fitted so I was wondering if a USB wireless adapter could be used instead. I have a Belkin F5D8055ea USB wireless adapter fitted and the system recognises the device, this is as far as I have got as I am a complete novice on Apple/Mac machines. Anyone any ideas please?

If the device is recognised, see if you can located your wi-fi network using Airport Utility.

Workshop (WebLogic 10.2 MP1) not available for Solaris 10 SPARC 64 bit?

Hi All,
When Workshop for WebLogic 10.2 MP1 will be available for Solaris 10 SPARC 64 bit.
I could find "WebLogic 10.2 MP1 for Solaris 10 SPARC 32 bit" but not for SPARC 64 bit!!
otherwise guide me to download page.
Thanks and Regards
Arunachalam.C
Edited by: arungoin on Feb 16, 2011 4:55 PM

I found by issue "mount -v" that our disk slices are
UFS type. So we don't need apply patch 5257399,
right? Please confirm. Thanks!!!For your information, you are asking the user community to confirm, not Oracle. Some (many?) of us are not employed by Oracle.
Therefore, the only answers you can get are from 'friends'. Nothing would be official and Oracle (and Oracle Support) would not be legally responsible.
Your safest bet would be to escalate the request wityh Oracle Support.

JRE 6.0 update 1 for Solaris 10 sparc 64 bit

Will jre 6.0 come out as a patch for Solaris 10 sparc? Or should I install it from the Java download site (http://www.java.com/en/download/manual.jsp)? I currently have jre 5.0.11 (patches 118666-11 and 118667-11).
Thanks.....

Will jre 6.0 come out as a patch for Solaris 10
sparc? Or should I install it from the Java download
site (http://www.java.com/en/download/manual.jsp)? I
currently have jre 5.0.11 (patches 118666-11 and
118667-11).Yes, it's out for 6u1, or should be out by now, as sparc (125136-01 & 125137-01)
and x86 (125138-01 & 125139-01).
You cannot patch your way from 5.0 to 6. You need to install the 6 packages, and then you can install the 6u1 patch. (or you could just install the 6u1 packages, and patch from that point onward).
As to the later question, yes, there isn't a formal JRE patch, but SUNWj6rt is essentially the runtime component of the JDK, so if you just had SUNWj6rt & SUNWj6cfg installed, you would have the equivalent of a JRE, though it still would be installed in a JDK directory. If you have just those two packages installed, then you could use 125136-01 as a JRE patch, since it will only update what installed. Oh yes, I forgot about the 64bit component to the runtime, SUNWj6rtx. If you intend on running the JRE in 64bit mode (-d64), you'd need SUNWj6rtx as well.
Dave
Sun Microsystems
Message was edited by:
katleman

Using Airport Extreme as a wireless adapter for an xbox 360 and/or computer

I have a wifi network that is successfully broadcasting internet, i also have a spare Airport Extreme that i would like to use as a wireless adapter for my xbox 360.
My Existing network is being broadcast from a D-Link modem so it doesn't support "extending a network" with airport extreme
What i want to achieve is:
Wifi Internet being broadcast by d-link, received by Airport Extreme WIRELESSLY, then sent via a WIRE to my xbox 360's ethernet port so that i can access internet on my xbox 360.
Unfortunately:
My Xbox 360 doesn't have built in wireless
Connecting to the d-link network wirelessly (with the airport extreme) doesn't seem to give me a wired internet connection (from the airport extreme)
I don't want to extend the network wirelessly
Any help would be appreciated
Thanks in advance to any users who know how to solve my (probably simple) problem

Welcome to the discussions, DanSwiggsD!
If you have a non-Apple device as your main router, unfortunately the AirPort Extreme has almost no chance of compatibility with your main router.
If you do have an Apple router as your main device, please post back with your model number and we'll let you know how your devices should be configured.
If you don't have an Apple device as your main router you have a few options to connect the xbox:
1) A pair of ethernet powerline adapters could be used if you did not want to run a regular ethernet cable from your main router to the xbox.
2) The new AirPort Express 802.11n model does have a feature called Proxy STA which should allow it to receive a wireless signal from any wireless router and allow the ethernet port to be enabled.
Message was edited by: Bob Timmons

Usb wireless adapter for solaris 10 on sparc platform

Similar Messages

Maybe you are looking for