USB Wireless connections not working in Latitude E6320 , Windows 7

Dear all,
I having an issue with an external USB wireless network drive.
I can install with no issue, however it appears always disabled on the network connection.
Someone had a similar problem?
thanks
José Luz

Dear Hemalatha,
Thanks for your support on this issue
I tried to updated all network drivers but with no success.
Indeed disabled all the networks, I took several print screen
Please take a look below:
- All the network drivers are enabled execpet the TP-Link
- All the network drives are disabled
When I tried to enable TP-Link, i get this message
If we take a look at Computer manager, you can see that everything is disabled except TP-Link
However I´m unable to work wit it.
Thanks once again for your support.
Thanks
José Luz

Similar Messages

Usb wireless mouse not working after latest -Syu

after todays kernel upgrade to :
Linux archie 3.7.4-1-ARCH #1 SMP PREEMPT
my usb mouse is not working anymore, The touchpad still works fine
lsusb: Bus 002 Device 002: ID 046d:c52f Logitech, Inc. Wireless Mouse M305
any ideas?

resolved: alternate usb-wireless mouse works fine - it's the battery!!
oh well

Keyboard wireless key not working after upgrading to windows 8.1

Hello,
I am having hp pavilion dv6-6165tx notebook, where keyboard having a wireless button that turns ON and OFF all wireless devices, After upgrading to windows 8.1, HP Connection Manager is not getting installed, as well as Key is not working, key color turns red and white but no action is performed.
Kindly suggest me some solution.
Note: HP Doesn't provide drivers for windows 8/8.1 ONLY WINDOWS 7 for hp pavilion dv6-6165tx.
Thanks.

Hi @Jayesh_Bhadja ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6165tx Notebook and the Wireless keyboard not working correctly. Here is a link to troubleshoot the keyboard.
The HP Connection Manager is something that is for Windows 7 not Windows 8.1. I would uninstall this from your Notebook. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. It has a troubleshooting tool in this.
Make sure all your updates have been completed. I would try restarting my Notebook a few times.
If that does not help I would uninstall the keyboard from the Device manager.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Wireless connection not working after installed newest Lenovo ThinkVantage System Update programs

Hi, everyone!
I've installed some newest programs through Lenovo ThinkVantage System Update and just after that my wireless connection has stopped working. Here are the installed programs:
ThinkPad UltraNav Driver for Windows 32-bit version 15.0.24.0;
ThinkPad Power Management Driver version 1.60;
ThinkPad Modem Adapter version 7.80.8.0;
ThinkPad Hotkey Features Integration Package Setup version 3.11.0001;
Inter Wireless WiFi Link for Window XP version 13.02.0000;
ThinkVantage Access Connections for Windows XP version 5.62;
ThinkPad Power Manager version 1.88;
Lenovo ThinkVantage Toolbox (32-bit) version 6.0.5514.61.
I've got a Lenovo T61 with Windows XP SP3.
Also in Device Manager, there are now the two "Other devices" bellow with a yellow question point and a yellow exclamation point by side:
Bluetooth Hands-free Audio;
Bluetooth LAN Access Server Driver.
Does anyone have any idea what can be done to have these issues solved?
P.S.: when I click Fn+F5 it shows only the Bluetooth Radio.

Hello and welcome,
I've seen something like this on XP machines after updates a couple of times now - my T61, a friend's T400, and his daughter's T61. I guess that makes 3
_Maybe_ your situation is the same.
The fix in all 3 cases was to go to device manager and uninstall the wifi driver. Then scan for hardware changes and let it reinstall the driver. Something about how Access Connections or some other networking mangement thingy was hooking the drivers I guess.
On both of the friend's machines, the wired networking was also b0rked. Same fix there.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

USB Wireless Headset Not Working

I am a medical transcriptionist and I use a Plantronics CS50 USB wireless head set to listen to my dictations. Ever since I installed the latest upgrade for Bootcamp a few days ago, I cannot plug in my USB plug and have the sound coming through the head set and not through the Mac built in speakers. I have Win XP SP3 installed on my Windows side. Before the upgrade, my set up was working fine. Now, I have to plug in some clunky, heavy earmuff head phones into the back port of the Mac in order to hear my doctor clearly. The culprit seems to be the Realtek Audio program. I uninstalled it, and it really messed up the computer! I ended up re-installing it. I went into the Program Preferences on the Mac side and selected USB Headset as my default for ITunes, etc. It worked fine. But I still am having the same problem on the Windows side. Can someone please help me to be able to set up the computer so that my USB headset bypasses the internal speakers and allows me to hear my dictations through my wireless headset? I would really appreciate the excellent help that I know comes from Mac users. By the way, I'm a Mac newbie. Our last Apple computer was an Apple IIC from WAY back when.... thanks in advance. I appreciate it.

I am not sure, but I've tried it again.
It seems I am stupid, I should wait for a few seconds, or try more times, because it works this time when I plug in my usb kb. I can even wake up mac while it is in sleep mode.
Just one thing is different this time. the USB KB NumLock is off when I plug it in. Previously I remember the NumLock is on.
Thank you for telling me that USB KB is still working I regret to shutdown my mac previously.

Equium M40x - Wireless Connection not working

I have recently changed ISP from Orange to Virgin [cable] I was using the Orange provided Livebox with my Laptop and there were no connection issues. Virgin have supplied me with a Netgear WGR614 wireless router.
Now my Equim will not connect to it. Can anyone offer a newbie some help or advice? Is there a driver update needed or will i need to purchase a new wireless card for my laptop? Currently my wireless network connection is via an Atheros AR5005GS.

Do you see the wlan of your router and can you connect to it? Remember, you have to enter encryption key again for your new router.
If not, I think the trick with Netgear router is, to enable wlan functionality.
To do so, you have to connect router with normal lan cable. Then enter IP adress of router in internet browser, you can find this information in manual with username and password too.
Try this, as I don't know what exactly is your problem with your wireless connection.

X3000 wireless mouse not working with lenovo T440 - windows 7

New mouse of HP x3000 model is not connects with lenovo T440 model which has windows 7 Enterprice edition. What could be the problem. I followed recommented steps.

Hello @Ilakkuvan,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your wireless mouse will not work on your Lenovo computer. I would be happy to assist you in this matter!
Does the wireless mouse work when connected to another computer? Do other USB devices work on your computer? In the meantime, I recommend following the steps in this document on Troubleshooting USB Connections (Windows 7). This should help connect your mouse to the computer.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Iball Usb modem(dongle) not working on g510 after windows 10 installation

Hi to all, I have just joined the forum to take some help from u people. I have a G510, on which i have just upgraded the OS from windows 8.1 to 10. After upgrading, some issues came like hdmi cable not working, external hard disk not detecting, etc., which with installation of drivers from lenovo website just went away. But still there is a problem of not connecting of my iball airway 21.0 Mp-58 3g usb modem with the lappy. The message coming while installation is "633The modem (or other connecting device) is already in use or is not configured properly". I have written to iball customer care for providing supporting driver for windows 10, but apart from them, if anybody else knows the way out, kindly share that to me. Thanks and regardsVirendra

Hey Dhelios and welcome to the forum -
I read this at their site and it didn't look good. Please note the NOTE:.
Release 3.01 UK - Apple Mac
Mac OS | Mac OSX 10.1-10.3 | Mac OSX 10.4
The ST-330 and ST-USB driver requires BSD support from Mac OSX.
Be sure to enable BSD support during the installation of Mac OSX!!
NOTE: The ST-330 and ST-USB driver does not support Intel based Apple Macs. For Intel based Macs we recommend using an Ethernet modem/router. A list of compatible ST-500 and ST-700 series products is available online here>

Wireless connection not working

For no apparent reason... I am getting this message "the settings saved on your computer for the network do not match the requirements of the network".
I reset the router, checked all the connections to the modem etc. and went through the setup again and I am still getting the message that my laptop is not detecting the router.
This router has worked without fail for several months and this problem seemed to begin for no apparent reason. I am not clear if this is a problem with my laptop or my router...Help please!

That means the password for the wireless has been changed. Remove the wireless profile and reconnect to the wireless network.
The box said windows xp or better... So I installed Linux!

Wireless connections not working

So I've been putting off getting the system updates, as they require me to restart my laptop. It forcibly installed updates last night, and since it restarted with full updates, I haven't been able to connect to a wireless network. Where there should be an icon for WiFi, it has since been replaced with the Ethernet icon. So far, I haven't found an option to switch between Ethernet and wifi, so if anyone has any suggestions I'd love to try them.
Thanks, R.

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that you are having an issue with your WiFi, and wanted to assist you! To start, can you please provide me with the Product Number of your notebook? In the meantime, please review the following document, as it may help to resolve the issue for you:
HP PCs - Troubleshooting Wireless Network and Internet (Windows 8) Please let me know if this information was helpful by clicking the thumbs up below.
Have a great day!

Safari is not connecting to internet on my iPad. Says "could not open the page becuase the server stopped responding." Everything else that updates over wireless connection is working fine. Get same response on any site I try to visit. Need Help!

Safari is not connecting to internet on my iPad. Says "could not open the page becuase the server stopped responding." Everything else that updates over wireless connection is working fine. Get same response on any site I try to visit. Need Help!

I am having identical problem on my iPhone 4 running iOS6. Did NOT experience this issue prior to upgrade.

HP 5524 Wireless does not work after firmware upgrade

HI,
I have just purchased an HP5524. After initial problems setting up the WPA key from the printer screen, I connected via USB, found the printer and swapped to wireless successfuly. I then installed the printer software on all my computers at home successfully over wireless.
The printer then needed a firmware upgrade to support eprint (?), which is successfully connected, downloaded the fireware, installed and went through the boot cycles successfully.
However, ever since wireless will not work. Before I return it to the retailer as "not fit for purpose" I thought I would ask the forum. The diagnostics downloaded a tool, which I went through, but this did not offer solutions that I had not already tried.
Thank you

Hi,
Thank you for posting you query,
In order to resolve the issue, please make sure the printer is placed closer to the router and uninstall the printer drivers already installed and then start the instalaltion and seelct teh connection type as wireless network. Then select use USB to configure wireless and when prompted conenct the USB cable and then select the network and enter the encryption key follow the onscreen instructions.
If the issue still persisits, please open the browser and in the address bar enter the IP address of the router and click on GO. This will take you to the router configuration page. On the router page, please click on Wireless Setup and please make sure SSID Broadcast is enabeld and the Wireless Mode is set to Mixed or 802.11 B/G/N and the Wireless Channel is set to 11 and click on Apply. Then try to connect the printer to the network by using the CD.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Wireless keyboard not working with Boot Camp

I have a brand new 15" Macbook Pro. I need to run Windows for work so I installed Boot Camp and Windows 8.1. I have a HP wireless keyboard with a USB dongle. It will not work at all. Windows recognizes that I've plugged in the dongle but the keyboard won't work at all. It's a brand-new keyboard and the batteries show full charge. All drivers look good in device manager. When I went thru the Windows troubleshooter, which is typically worthless, it said something about the dongle being USB 2.0 and the Mac's USB is 3.0. But shouldn't it be backward compatible? It has no problem with my old wireless mouse with a USB dongle.
I also notice a significant difference in the clarity on my dual external monitors with Windows instead of OSx. The colors aren't as sharp and the text isn't as clear - kind of fuzzy. Is that just how it goes with boot camp, or is there anything I can do, like maybe an upgraded driver, to get the same clarity on my dual monitors with Windows like I get with OSx?
Any help is appreciated.

Unfortunately I can't turn off Bluetooth in Win 8.1. I go to the page where i should see the slider and the page just spins and spins. I thought my install might be hosed so I blew it away and did a fresh boot camp install. Still no joy; BT still spins - and I still can't connect to the USB keyboard. I can plug the dongle in and see it in devices, and it says it's ready to go but the keyboard doesn't work. It's brand-new and has worked on a Windows box so I know it's not a bad keyboard. Maybe time to go back to a Windows box and ditch boot camp?

Are mobile internet USB devices still not working on Snow Leopard?

Are mobile internet USB devices still not working on Snow Leopard? I actually had to go back to my previous operating system to get this to work. I would however prefer to use Snow Leopard...if Apple & HUAWEI have finally got their act together!

There appears to be a problem with drivers for USB wireless modems with 10.6. I upgraded from Leopard to Snow Leopard and now can't connect to the internet with my wireless modem. I hope Apple sort this out soon. Or maybe it's Huawei that needs to put a 10.6 driver into its software.

Error message on my HP Photosmart C7280 All-in-One 'Wireless Radio not Working'

error message on my HP Photosmart C7280 All-in-One 'Wireless Radio not Working' My broadband is BT Infinity with a very strong signal throughout the house and my operating system is Windows XP. My printer will not connect wirelessly to my network, what can I do with respect to the error message 'Wireless Radio not Working'

Hello @GeoffH777 ,
Perfect! You are very welcome, I am very happy to hear the reset helped!
If you have a quick moment, please scroll back to my last message here and click the "Accepted Solution" button, so others can find our thread if they happen to run into the same issue.
Greatly appreciated, have a wonderful day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

USB Wireless connections not working in Latitude E6320 , Windows 7

Similar Messages

Maybe you are looking for