USB zip drive work on ni8174 with NT4.0?

Has anyone used an Iomega Zip drive (USB) on the NI8174 with NT 4.0 installed? Iomega supplies special drivers for using usb on NT 4.0, but I am wondering about if the drivers work on this computer from NI...

Hello Jason!
The NI 8171 Series PXI Embedded Controllers use industry standard Intel architectures. Specifically, these controllers use the Intel 815e chipset, which implements a UHCI USB host adapter. As long as the Iomega NT driver supports this adapter, this should work.
As far as software, you will need to disable Legacy USB in BIOS, so that the OS can use the Iomega driver. With Legacy USB disabled, you will not be able to use USB keyboards or mice.
Julianna Forrest
Applications Engineer
National Instruments
www.ni.com/ask

Similar Messages

I have a 2012 Mini with a fusion drive that won't boot from a usb cloned drive. It came with 10.8.2 pre installed. I have zapped the PRAM and reset the SMC. Any thoughts?

I have a 2012 Mini with a fusion drive that won't boot from a usb cloned drive. It came with 10.8.2 pre installed. I have zapped the PRAM and reset the SMC. Any thoughts?

When I tried using a recently downloaded (from the App store) version of MtLion 10.8.2 (12C60) I could NOT get the new MacMini to install or boot from a USB I had previously made. I was however able to use the Recovery Mode of the MacMini to create a bootable SSD which I had installed. The problem arose when I went back into Recovery DU as it saw the seperate drives (SSD & HD) as a broken Fusion Drive. Interestingly DU from the boot volume had NO issues and reported NO faults. It was the Recovery DU that identified the faulty Fusion Drive configuration. At this point I am definately out of my depth but my speculation is that the Recovery Volume is being used in some fashion to form the method or pattern that DU assigns files to the drives, System Report sees the drives as seperate volumes with all their individual characteristics.
Disk Utility did not make a bootable USB, I don't have or use CCC or Super Duper.
Here is the longer version I've been compiling:
Having bought a late 2012 Mac Mini(6,2) i7 2.66GHZ with the standard 1TB 5400 HD and 4GB of RAM (base model) I immediately decided to install a Mercury Elite 6g 240GB SSD and up the RAM to 16GB. I received both shipments on the same day and had all my new toys in front of me. After following the video advice on OWC’s website for the installation of the second drive I started the mini and formatted the SSD to accept the OS from Recovery on the original HD. This MacMini shipped with 10.8.2 (12C2034) as the OS, the normal build of 10.8.2 is (12C60). Having used Recovery Disk Utility to format the SSD it came back with an error that DU could’t Repair. I went ahead and installed the OS on the SSD and the Mini booted normally from both drives. The issue I encountered with this setup was that iMovie encountered an “unexpected error” and would not save a completed project. I therefore decided to figure the drive issue out because I suspect the new Fusion File Management software didn’t like my configuration with drives that Recovery DU saw as needing to be “fixed”. After spending some time on the phone with both OWC and Apple Support I took the plunge and used Internet Recovery Disk Utility and allowed both drives to be “fixed” after which DU created a Fusion Drive (Logical Drive) that I then ran Repair Disk on and it showed up as a single drive in DU. It works perfectly as described by Apple’s site:
http://support.apple.com/kb/HT5446
Having checked the Link Speed and Negotiated Speed they both show as 6g so I’m pleased not to have lost performance due to it being fuzed to a 3g 5400 drive. The biggest drawback is that Apple’s Fusion Management only allows for 1 additional partition and I would have preferred more than that.
I have sourced some additional information here:
http://blog.macsales.com/15619-special-note-for-adding-an-ssd-to-a-2012-mac-mini ?
http://blog.macsales.com/15619-special-note-for-adding-an-ssd-to-a-2012-mac-mini ?
http://blog.macsales.com/15619-special-note-for-adding-an-ssd-to-a-2012-mac-mini ?
http://blog.fosketts.net/2011/08/05/undocumented-corestorage-commands/
If anyone has a factory Fusion Drive could you please post the Link and Negotiated Speeds of both drives? This information can be found in Apple > About This Mac > More Info… > System Report > Serial ATA and the drives should show up as discrete drives with their info listed separately.

Iomega usb zip drive not mounting to desk top

i have a external usb iomega 250 zip drive and i can seem to get it to mount to the desk top
i look on iomega website and it says that OS X dose not need any software install or additional drivers to work
i cant seem to get it to mount on the desk top
i have also installed the software from the disk and it wont mount
i them uninstall the software and try it again and still the same problem
as i know that this is a old beast of a drive system i am trying to get some songs off this disk from a 4 track zip disc recorder
any help would be great
thanks santini

santini,
This article may help:
http://support.apple.com/kb/HT1720?viewlocale=en_US
Please remember there is no Iomega icon on the desktop until you mount a 250MB disk, just like the optical drive.

Why won't my USB flash drive work?

I am working between two Macs in my house: the upstairs one is MAC OSX 10.6.8, and the downstairs one (an eMac) is MAC OSX 10.5.8 -- if that matters.
I need to transfer files from the downstairs computer to the upstairs one.
When I insert a USB flash drive into the upstairs Mac, I am able to save files to it and from it. (I have already read about the correct way to format the flash drive for FAT 32 and read/write, and I eject the drive correctly when I'm finished.)
Then when I go insert the flash drive into the downstairs Mac:
the flash drive appears on the desktop
I'm able to open it, to see the files saved to it
I can save files off of it, BUT
I cannot save files to it. I get a message that there isn't enough disk space, which is incorrect -- there's plenty of memory
I have tried opening Disk Utilities on both MACs, erasing the flash drive's contents, and reformatting it, but I get the same situation.
I'm guessing the solution is simple and involves the eMac's preferences. Am I on the right track?
Frustrating.
Many thanks for your help!

Niel:
Thanks for the reply!
The file on the eMac that I'm trying to transfer onto the flash drive is far less than 4GB.
So I went onto the eMac's Disk Utilities and reformatted the flash drive as Mac Extended: still no dice. Even with the contents of the flash drive erased, any attempt to copy files onto it resulted in the same "not enough disk space" message.
So I tried reformatting the same flash drive on the upstairs Mac. Same thing. I tried reformatting the flash drive both as "Mac Extended" and "Mac Extended (journaled)."
Thoughts?

Should I buy an Iomega USB Zip drive for my Mac G5?

Zip disks are handy for doing routine backup of genetal documents such as Word and Excel files, unlike CD-R's where after one use they are done and just have to be thrown away.
I had a zip drive with my old G4, but some people give the latest model of the Zip 100 bad reviews. Should I get it or not? I already have plenty of Zip Disks.

I'd recommend against it. Zips are ridiculously unreliable. For the kind of backups you're talking about, you're probably better off with a few high-capacity USB Flash drives, or using CD-RW media that you can re-write to. Either is far more reliable, and more compatible with most other computers, if you ever find yourself needing a file at a friend's house, or printing things out at Kinkos.
I know too well the clickety-clack of a dying Zip drive, and staring at now useless disks. Before I sold my G4, I transferred all my old Zips to three Dual-Layer DVDs. Safe and sound.
Good luck, and let me know it this helped.
-K

External USB hard drives working very slow and/or not recognized. Help!

This probably started after my Yosemite upgrade, but my external usb hard drives either aren't working well or not being recognized. It's taking forever to write files to my external Seagate Free Agent USB 2.0 through front ports and my thumb drives aren't mounting (they have shown up for a second or two, then nothing). Is there a fix? I'm on an early 2008 mac pro with Yosemite 10.10.2.
Thanks!

Do an SMC reset using this slightly-modified procedure:
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
1.Shut down the computer.
2. Unplug the computer's power cord.
[2a. Press the power-on button to discharge the power capacitors.]
3. Wait fifteen seconds.
4. Attach the computer's power cord.
5. Wait five seconds, then press the power button to turn on the computer.
in all cases, the stated times are recommended minimums, and there are no maximums.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

USB FLASH DRIVE WORKS ON MAC BUT NOT ON WINDOWS... CAUSE I ERASED IT IN MAC

I decided to take my work flash drive home to work on a file. At home I saw that some weird files were on the flash drive and wouldn't delete, so I decided to save my files on my Mac and erase the USB flash drive. I selected the flash drive (by the way it's a 2 GB flashdrive) and I used the SECURITY OPTION 35 PASS ERRASE. Format: MS-DOS (FAT).
Everything was fine until I took my flash drive to work and plugged it on a Windows XP Computer and it appeared as Drive E I think and when I tried to open it it asked me to format it. I risked it and clicked OK and it said that I didn't have sufficient rights or something.
SUMMERY:
2 GB USB ERASED USING MAC DISSK UTILITY
EVERYTHING FINE UNTIL I PLUG IN THE FLASH DRIVE IN A WINDOWS
WINDOWS ASKS ME TO REFORMAT FILE
I PLUG IT INTO A MAC COMPUTER AT WORK AND IT DOES WORK
IF ANYBODY KNOWS HOW DO I FIX THIS THANKS?

The drive is probably now formatted for a Mac only file system. To format for a PC:
Insert the drive in the Mac and start Disk Utility (Utilities folder).
Select the drive in the left column. Be sure to select the drive (all the way to the left) not a volume (indented below the drive name).
Select the "Partition" tab.
Set "Volume Scheme" to "1 Partition" (not "Current" even if it's already one partition).
Click the "Options" button".
Select "Master Boot Record".
Click the "OK" button.
Enter a volume name (all uppercase).
Set "Format" to "MS-DOS (FAT)".
Click the "Apply" button.

I can't install VISA driver and USB GPIB driver on my PC with VISTA... help me...

I have LabVIEW7 and VISTA, it's ok, but I can't install VISA driver and USB GPIB driver on my pc... it's necessary to connect my pc with instruments? Or LabVIEW7 have this files??? Thanks,
Vanny.
Thanks,
Vanny
Sweet, Beautiful and Young Female Physicist (SBYFP)
(I speak a not very good english, so If U are Italian LabVIEW expert speak in Italian, if U speak in Eglish... please speak easy )
My e-mail for personal contact: [email protected]_NO_SPAM_PLEASE
Solved!
Go to Solution.

You need Administrator privelages to install drivers on Vista
David
www.controlsoftwaresolutions.com

Will new USB hard drive work in Safe Mode?

Hello,
I just a had a recent post about some Toshiba laptop issues I am having. To make sure I don't lose my files, I have have been looking at a Western Digital 500GB USB drive.
I'm able to boot to Safe Mode OK, and USB thumb drives have worked. I noticed this WD USB drive has software to install. Will I be able to use the USB hard drive for the first time in Safe Mode, or will I need to install the software first (which I don't think I'll be able to do in Safe Mode).
Just making sure I can before I buy it, thanks!
Solved!
Go to Solution.

you should not have any problem installing the WD software in safe mode and perform the backup.
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

HT2801 Will USB Super Drive work on imac?

The CD/DVD drive on my imac isn't working. I keep getting error code. I've researched error, doesn't seem to be a fix for it. Will I be able to use external Apple USB Superdrive?

No, the Apple external superdrive only works on the MBair, Mac Mini and the new retina.
You can however buy about any usb external drive from another vendor and it should work.

How to use usb super drive at mcbook pro with retina

I had just bought a mcbookpro with retina on-line. I bought a USB super drive as well. I don't know how what button i'll be using to operate the usb super drive. Can anyone help?

If you've a CD with Microsoft Office on it, all you need to do is double-click the installer program on the CD. If you don't see the CD mounted on your Desktop, go to Finder>Preferences>General, and tick the box that says "CDs, DVDs, and iPods" under "Show these items on the desktop".
After you've finished installing Office, simply drag the disc to the Trash and it will eject (I don't have a Retina display model, so I'm not sure if there's an optical disc eject button next to the F12 key or nor - if there is, you can use that as well).
Hope this helps.
Clinton

Remote access the airport extreme usb hard drive over the internet with multiple users?

I just purchase the new airport extreme 802.11n and set it up on my LAN behind a comcast modem with broadband. I plugged a 3 tb Seagate hard drive formatted with fat32 (default) to it and have set it up for access for all of my computers, ipad, iphone, android in my house. Everything works as expected, internet access, file access to the USB HD on all devices locally through back to my mac. I would now like to allow my daughters in another state to access this drive through the Airport Extreme remotely from their location and have there own accounts on this hard drive to store and move their files for on the go access. I have studied many of the forums and have enabled share disks over WAN, Enable file sharing but no body really gives an exact method of connecting remotely. I had one of my daughters try on her Macbook Pro laptop through the finder, connect to server, by giving her the IP address. She could see the name of the Airport Extreme but could not access the hard disk and got a "Not able to connect message". I am obviously missing something simple that needs to be checked or setup but have drained my brain trying to figure it out. Most of the forums describe clicking manuel setup on the Airport utility, but with version 6.1 this is now where to be found. I have a DYN account but could not figure out where to input this in the Airport utility.
There is a network option which has DHCP lease and range and a box for Enable NAT port Mapping Protocal with Enable default host at:
I am guessing that this is for some other purpose though. Please help

Try installing AirPort Utility 5, then you may be able to follow the guides you mentioned earlier:
http://macintoshdesktop.blogspot.co.uk/2012/12/airport-utility-56-and-mountain-l ion.html

External hard drive works, but not with a docking station

hello,
I'm finding it difficult to use my docking station with my WD Cavier Green 2TB hard drive.
I know that the hard drive is in perfect working order as it still works with my many different leads and cables i have. But when i plug it in to my docking station i get the "unable to read' message.
I've checked disk ultility and the hard drive is there but the second name down reads disk1s1 and is greyed out.
I've read through the countless discussions and opend the ownership (when i plug it in with my many cables) but when i use the dock it claims there's no ownership.
I've tried verifying and repairing but an error message appears.
I've tried turning off the hard drive and docking station and turning it back on.
I've tried restarting my comuter.
And i've tried using a different cable.
it just seems odd that a docking station could stop my hard drive being recognised yet plugging it with many cables is fine.
Is it simply a case of my hard drive not being fully compatible with the docking station? or am i missing something?
Below is all my specs.
MacBook Pro
Mac OS X Lion 10.7.5
Hard drive
Western digital Caviar Green
WD20EARS 2TB
docking station
Akasa DuoDock S
USB 3.0
model number: AK-IC08U3-BK

Hello, I am having a similiar problem. I had an old MacBook that died so I took out the partitioned HDD and put it in an enclosure. The other day I plugged it into my other MacBook and both HDDs appeared (Mac and Bootcamp) but today only Bootcamp will appear. When I run the commands recommended above, I get this:
It appears as if there are two traditional hard drives? The first and second line? I'm not very Mac savvy so I don't know how to use the chflagg command to make these visible. Ultimately, I want to complete wipe this entire HDD (partition included) so I can have it fresh. Can anyone advise on how to make the Mac partition visible or how to complete wipe it and start fresh?
Thanks!

How to share a usb connected drive as read only with smb

I have OS X 10.10 installed and want to share a folder on a USB connected hard drive (HFS+ formatted) via SMB as read only.
(The client computers should not be able to change nor delete files from the share.)
I created a share in system preferences->file sharing and configured only myself as user to have read/write access.
Still another user is able to connect to the share from another Mac running OS X 10.6.8 and can delete files from it!
I have disabled AFP sharing. Only SMB sharing is enabled.
Is there a major bug in SMB sharing in Yosemite or am I missing something.
Gerd.

Hey there Max,
If you can’t find the printer in the network browser, it may be easier to add the printer manually using the URL field, as shown in the article below.
Mac OS X: How to manually add a Windows shared printer - Apple Support
Ciao,
-Jason

External Usb Hard drive and Sync Problems with Shuffle

First of all excuse me for my bad english, i'm trying to obtain answers here, because i haven't received help from italian forum.
I've an external USB HD where i put all my songs, the main notebook HD is too small...
So, i charge music inside the main Itunes libray called "Music" but the the real files are still on my external HD drive.
The problem is when i try to add a song or a folder and i don't connect the HD ext. drive to the notebook...
The shuffle erase everything.....but the title of the songs are still in the library...
Why??? Thx for all..

First of all excuse me for my bad english, i'm trying
to obtain answers here, because i haven't received
help from italian forum.
I've an external USB HD where i put all my songs, the
main notebook HD is too small...
So, i charge music inside the main Itunes libray
called "Music" but the the real files are still on my
external HD drive.
The problem is when i try to add a song or a folder
and i don't connect the HD ext. drive to the
notebook...
The shuffle erase everything.....but the title of the
songs are still in the library...
Why??? Thx for all..
The real files have to be available to iTunes (the USB HD has to be connected) otherwise Shuffle will "update" by erasing them. That's the way it is...

USB zip drive work on ni8174 with NT4.0?

Similar Messages

Maybe you are looking for