USB2.0 Video Capture Controller

Hi,
I cannot find the driver to upgrade my Video Capture Controller.
HP Pavilion dv6 3205tn product name and model
64 bit windows 7
I have been into the device manager to try update the driver but it finds nothin installed or online.
Any assistance on how to update this driver would be appreciated.
Thanks

Hello @HOMEPCUSER ,
Welcome to the HP Forums!
I understand you're having issues installing the drivers for your Image Capture Device.
Can you please tell me what the actual device is? Image Capture Device is a generic name for any device capable of providing and image to your PC. This includes cameras, webcams, scanner, printers, etc...
If you're not sure what the device is please provide the hardware ID: How to Find Hardware ID.
I look forward to your reply!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Similar Messages

Video capture stops when connected to FCP using fire wire

Captured video using Sony VX2000 using 48 khz and 16 bit audio stereo mode. Using Sony Premium miniDV tapes.
Video plays back fine when not connected via firewire to G4 dual 867 with 2 GB Ram.
Using default capture preset of 48 khz 16 bit, connect fire wire and video capture randomly stops stating it has lost connection or is missing capture data. If I switch to just plain capture using non controllable device, I have the same issue except the tape keeps playing but FCP stops capturing.
Tried other tapes and no problem.
Tried other fire wire cable and no problem.
I am having problems only on this tape and when connected.
When not connected it plays back on the camera with no stopping.
Steve Bowers

To answer your questions--
Dumping preferences usually does not cause problems. More likely you updated some part of your system or are having other hardware issues.
No updates or hardware issues. The original problem (discussed in another thread) was one where the video is skewed inward on the lower right corner. Apple instructed me to dump the preferences and start from scratch. That I did and now I am experiencing problems I did not have before. If it is hardware problems, then I guess it is just coincidental that FCP is just now presenting problems. However, the other problems I am having are software related and does not involve the camera.
What software versions of FCP, OSX and QT are you running and have you updated any of them recently?
FCP version-5.1.2
OSX-10.4.8
QT-7.1.3
Is there anything special about the 'difficult' tape?
No.
Did you record it?
Yes
Was it the last of a bunch?
Not sure. I buy bulk so this was one in a box of 5 that is was in a case of 50 boxes.
Are you using the same camera as the playback device?
Yes
Does it work if you use another computer?
Not sure what you mean. I have only one MAC G4.
Was it recorded using another camera in a non-DV format?
No. Playback is through same camera is was recorded on.

10.4.9 breaks FC video capture

Installing the 10.4.9 Update on my eMac 1.42ghz G4 system essentially broke Final Cut's video capture capabilities, showing the same failures with both my FC 4.5 HD and FC Express 2.0 versions of the program.
I have taken a number of steps to confirm that the problem source is the 10.4.9 update, including re-installing 10.4.0 from DVD and then running capture tests before and after re-installing the 10.4.9 software update.
Under 10.4.9 it was impossible to capture more than a few seconds of uninterrupted DV video, even though I was using equipment, software and procedures that had performed reliably many dozens of times previously. Watching the access LED's on my external hard drive illuminated the core of the problem (possibly an issue with storage buffering or Firewire).
When video capture is functioning correctly the system writes to the drive with frequent short bursts at a rate of several times a second. Running under 10.4.9 the video capture attempts have very long periods with no drive activity, followed by long continuous writes. While
those long writes are taking place the input video freezes and falls silent, both on the preview screen and in the resulting movie file on hard disk.
One odd note is that, in testing, I was able to get a few usable video captures by setting the device control to "non-controllable device" and using "Capture Now" mode. However, EVERY capture attempt with device control set to "Firewire" or "Firewire BASIC" would fail and, once the capture function breaks, it stays broken until the system is rebooted, regardless of subsequent device control adjustments or capture mode.
I currently have the system re-installed and re-updated to 10.4.7 and my Final Cut video capture is functioning normally. Based on considerable knowledge of computing and media systems, my own experiences with the 10.4.9 update, and other comments about 10.4.9 that I have read elsewhere,
this latest OSeX update seems to make changes to some critical, low level functions that have the potential of breaking a great deal of software and peripherals. My standing advice to clients and colleagues will be to stay away from 10.4.9 until such time as Apple addresses
the apparent compatibility problems.
peace
......

I'm afraid I can't help you other than to suggest you
post your Final Cut issues in the Final Cut forum
area here:
http://discussions.apple.com/category.jspa?categoryID=
123
I doubt the 10.4.9 broke anything.
I am a very knowledgable and experienced systems tech and have done extensive trouble testing trying to resolve this issue. Acknowledging that there are very large numbers of variables involved in any modern computer process, I have scientifically confirmed that, at least for this system / model / software combination, 10.4.9 is definitely the variable that is breaking my video capture capabilities.
Having stepped through the most of the OS updates under identical hardware, software and preference settings:
OSeX 10.3.x to 10.4.8 == capture functions normally
OSex updated to 10.4.9 == capture broken
Exactly which of the many variables in the 10.4.9 update is causing the breakage is up to Apple to determine; I don't have access the source code like I do with my GNU OSS & Linux systems.
Still, per your suggestion, I will cross post this issue to the Final Cut list. There is always the possibility that some hidden variable in the equation could be causing the conflicts between the software versions I need to rely on and 10.4.9, though I have already tested a number of hardware and preference configurations to eliminate the most probable suspects.
peace

Video capture on new computer not working

Recently I got computer from ADK which has a 6 pin firewire connection on back. I
cannot get CS5 to recognise my Canon HV20.
In the past I used a 4 pin to 4 pin firewire and CS3 to capture HV20 from laptop
without problems.
On the computer company's quality assurance page there is a check mark next to
"capture/render test completed", however there was a small metal "buckle" that was supposed to
pulled back away from the firewire port where the cable goes which blocked any firewire cable from
entering. I had to bend it out of the way myself. Could they have done the capture test without
a firewire port? I have to wait until Monday to contact them.

Thanks, under IEEE 1394 Bus host controllers it says "Texas Instruments 1394 OHCI Compliant Host Controller".
I'll have to change that to legacy somehow. I'm not sure how to do that at the moment.
With my video capture it has been saying offline like it doesn't recognise it at all.
I may have to end up going with HDV split but at present am concerned as to whether or not the port
is bad.

Digital video capture and the K8T Neo

I was wondering if anyone has had any luck capturing digital video with a machine based on this motherboard. I've tried using various programs, including Adobe Premiere Pro, Scenalyzer, DVIO, and Movie Maker. Regardless of what I use, I end up with enough dropped frames to make the video very choppy in places, especially if I try to capture type-2 (video for Windows) DV, as Premiere Pro requires for editing.
Here's my setup:
MSI K8T Neo
AMD Athlon-64 3400+
2 X 512 MB KingMax PC-3200 RAM
Hercules RADEON 9800 Pro graphics
1 X Maxtor 60 GB Ultra ATA hard drive (model 5T060H6)
2 X Maxtor 250 GB SATA hard drives (model 7Y250M0)
Plextor 708-A DVD+/-RW
I've tried the following configurations of hard drives with no success:
500 GB RAID0 array on Via controller, 60 GB drive on tertiary IDE, running from one drive and capturing to the other
250 GB drive on Via controller, 250 GB drive on Promise controller, 60 GB drive on secondary IDE, tried capturing to each
I've run some tests of disk write speeds, and they seem more than adequate for video capture (approximately 50 MB/s write for the SATA drives, 25 MB/s for the Ultra ATA drive).
I've read that there were issues with PCI bus throughput with slightly older Via chipsets, and that there have generally been issues with Via ATA controllers.
So, has anyone successfully used this motherboard to capture digital video? What did you have to do to prevent frame drop?
Thanks in advance for any advice...

I was wondering if anyone has had any luck capturing digital video with a machine based on this motherboard. I've tried using various programs, including Adobe Premiere Pro, Scenalyzer, DVIO, and Movie Maker. Regardless of what I use, I end up with enough dropped frames to make the video very choppy in places, especially if I try to capture type-2 (video for Windows) DV, as Premiere Pro requires for editing.
Here's my setup:
MSI K8T Neo
AMD Athlon-64 3400+
2 X 512 MB KingMax PC-3200 RAM
Hercules RADEON 9800 Pro graphics
1 X Maxtor 60 GB Ultra ATA hard drive (model 5T060H6)
2 X Maxtor 250 GB SATA hard drives (model 7Y250M0)
Plextor 708-A DVD+/-RW
I've tried the following configurations of hard drives with no success:
500 GB RAID0 array on Via controller, 60 GB drive on tertiary IDE, running from one drive and capturing to the other
250 GB drive on Via controller, 250 GB drive on Promise controller, 60 GB drive on secondary IDE, tried capturing to each
I've run some tests of disk write speeds, and they seem more than adequate for video capture (approximately 50 MB/s write for the SATA drives, 25 MB/s for the Ultra ATA drive).
I've read that there were issues with PCI bus throughput with slightly older Via chipsets, and that there have generally been issues with Via ATA controllers.
So, has anyone successfully used this motherboard to capture digital video? What did you have to do to prevent frame drop?
Thanks in advance for any advice...

Problem with video capture

We expect "Captfoss" to reply soon..
Code:-
import java.awt.*;
import java.net.*;
import javax.media.*;
import java.awt.event.*;
import javax.swing.*;
import javax.media.format.*;
import javax.media.protocol.*;
public class JMF2 extends JFrame implements ControllerListener,ActionListener
     Processor p=null;
     DataSink sink;
     MenuBar mb;
     MenuItem start,stop;
     Menu file;
     ProcessorModel model;
     Format formats;
     DataSource source;
     JMF2()
          setVisible(true);
          setSize(800,600);
          setLayout(new BorderLayout());
          mb=new MenuBar();
          file=new Menu("File");
          start=new MenuItem("Start");
          start.setEnabled(false);
          stop=new MenuItem("Stop");
          file.add(start);file.add(stop);
          mb.add(file);
          setMenuBar(mb);
          start.addActionListener(this);
          stop.addActionListener(this);
          addWindowListener(new WindowAdapter()
               public void windowClosing(WindowEvent we)
                    System.exit(0);
          try
               formats=new VideoFormat(VideoFormat.CINEPAK);
               model = new ProcessorModel(new Format[]{formats}, new FileTypeDescriptor(FileTypeDescriptor.QUICKTIME));
               p=Manager.createRealizedProcessor(model);
               source=p.getDataOutput();
               sink = Manager.createDataSink(source, new MediaLocator("file:///c:/New.mov"));
               p.addControllerListener(this);
               p.realize();
          catch (Exception e)
               System.err.println("Got exception "+e);
     public void actionPerformed(ActionEvent ae)
          try
               if(ae.getActionCommand().equals("Start"))
                    p.start();
                    sink.open();
                    sink.start();
                    System.out.println("start");
               else
                    sink.stop();
                    sink.close();
                    p.stop();
                    System.out.println("stop");
          catch(Exception e)
               System.out.println("Some problem "+e);
     public synchronized void controllerUpdate(ControllerEvent ce)
          try
               if (ce instanceof RealizeCompleteEvent)
                    Component comp;
                    System.out.println("Realized");
                    start.setEnabled(true);
                    if ((comp = p.getVisualComponent()) != null)
                         add (BorderLayout.CENTER, comp);
                    else
                         System.out.println("No vis com");
                    if ((comp = p.getControlPanelComponent()) != null)
                         add (BorderLayout.SOUTH, comp);
                    validate();
                    System.out.println("Updated");
          catch(Exception e)
               System.out.println("Exception rasied "+e);
     public static void main(String s[])
          new JMF2();
1..This is the code which we used for capturing and saving video in the disk..But we got a mov file created zero size..what is the reason for that..Can any one suggest a better way for this..
2..Is Creative Webcam II supported by JMF 2.1 ..
3..Suggest any other format for audio and video capturing and saving..
Thanks in advance..

Thanks T.B.M..
It worked..My webcam details are as follows:
{color:#ff6600}Name = vfw:Microsoft WDM Image Capture (Win32):0
Locator = vfw://0
{color}
It suports the following formats..
{color:#ff6600}
0. javax.media.format.RGBFormat
RGB, 320x240, Length=230400, 24-bit, Masks=3:2:1, PixelStride=3, LineStride=960, Flipped
1. javax.media.format.RGBFormat
RGB, 160x120, Length=57600, 24-bit, Masks=3:2:1, PixelStride=3, LineStride=480, Flipped
2. javax.media.format.RGBFormat
RGB, 176x144, Length=76032, 24-bit, Masks=3:2:1, PixelStride=3, LineStride=528, Flipped
3. javax.media.format.RGBFormat
RGB, 352x288, Length=304128, 24-bit, Masks=3:2:1, PixelStride=3, LineStride=1056, Flipped
4. javax.media.format.RGBFormat
RGB, 640x480, Length=921600, 24-bit, Masks=3:2:1, PixelStride=3, LineStride=1920, Flipped
{color}
So made the following changes in my code..
dl=CaptureDeviceManager.getDeviceList(new VideoFormat(VideoFormat.{color:#ff6600}RGB{color}));
ml=((CaptureDeviceInfo)dl.firstElement()).getLocator();
formats=new VideoFormat(VideoFormat.RGB);
model = new ProcessorModel(ml,new Format[]{formats}, new FileTypeDescriptor(FileTypeDescriptor.{color:#ff6600}MSVIDEO{color}));
p=Manager.createRealizedProcessor(model);
source=p.getDataOutput();
sink = Manager.createDataSink(source, new MediaLocator("file:///c:/Adiyae.{color:#ff6600}avi{color}"));
p.addControllerListener(this);
p.realize();
Now the file is getting created with its size depending upon how long i capture..This is fine..But when i try to play the file using a media player it doesnt open.. when i tried opening it with JMStudio i get the following message..
{color:#ff6600}Controller Error:
Failed to realize:Failed to parse the input media..
{color}Also can you tell me how to choose the FileTypeDescriptors for a particular video format.. The only FileTypeDescriptor that works with mine is the MSVIDEO..
Thanks in advance..
Edited by: s.baalajee on Dec 8, 2008 5:40 AM

USB video capture not working

I'm having trouble with Skype recognizing USB video capture devices. I've been doing this for years and now can't seem to get it to work. I only do this every few months, so I might have missed a post. I have tried 4 different computers with 4 different USB capture devices, it would seem it;'s a Skype issue. Anyone else have some ideas? Will Skype repair the issue?
Thanks for your toughts!

This works for me. I have to do it every once in awhile after powering up my PC.
It may or may not work for you.
Open Windows Device Manager and for each Universal Serial Bus (USB) Host Controller right-click on it and then left-click on Properties. Ensure that the Device Status TextBox shows "This device is working properly." If not, Disable and Enable that USB Host Controller.

JMF and video capture card?

i wanna ask how can i usea video capture card with the jmf and record video
i try to detect my capture card but the jmf didnt detecte it please pleas help me

hi,
i use a tv-card with my camera through linking them with a composite cable. Also, my tv card has capturing capability and i use JMF to do a capture program with these tools and the result is good for me. The monitor.zip file wihich contains a sample of capturing and monitoring simultaneously exists on sun.com. I use it and it was very helpfull for me.
JMF detects cards through its 'CaptureDeviceManager' which is a controller type object. If you specify like Vector devices = CaptureDeviceManager.getDeviceList(null) -> You will be get the list of appropriate devices on your pc.
Regards,
Erohan

Pinnacle Video Capture for Mac

After talking with a bunch of salesmen (considering getting a DvD writer), I took the advice of someone in the Apple Store and bought a Pinnacle Video Capture for Mac to copy my laserdiscs. It was $100 before tax, and didn't do stuff I don't plan on doing anyway. I did spend another $25 to get an S-video cable.
I installed the software and connected it up to my LD. I started capturing the movie, and selected S-Video (although in the small window they showed, I didn't see any difference between that and video out. I selected a max time from a limited selection, and let it record.
After a while, I went downstairs and saw that the audio and video were not synchronized at all. I let it continue.
After a while I came down again, and the movie was finished, so I stopped it. I found the MP4 - it was in the iTunes movie directory, and played it in iTunes. I fast-forwarded it to near the end, the voice and video were way off-set.
I haven't tried burning this yet.
Quicktime player doesn't think this is a valid movie file. I selected "open with" and "other" and the recommended applications had iMovie greyed out.
Why in the world would the audio and video record at different speeds?
Do I have to buy software to edit the movie down to the correct size?
My Mac has:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version: 1.21f4
I noticed the Pinacle Video Capture program was still running, so I tried to quit it, and got a window asking for my administrator ID and passsword to allow Pinnacle Video Capture to make changes. Why?

The audio drifted out of sync because the Dazzle doesn't support locked audio. For short videos (say, under 10 minutes) this won't be very noticeable but when you capture longer videos it becomes progressively worse over time.
What do you want to do with your Laserdisk copies? Watch them on your iPod? Edit and/or burn to DVD?
A device like the Canopus ADVC-110 will do the video/audio conversion properly, keeping the audio and video in sync regardless of the length of your video. It converts to DV, not to MP4, and you would use it with iMovie or Final Cut (not iTunes). However you can export your video from iMovie or Final Cut to iPod/AppleTV formats.
The Dazzle device will not work directly with iMovie or Final Cut.
ps. If all you really want to do is transfer your Laserdisc videos to DVDs, it will be a whole lot faster & simpler to get a DVD player/recorder that has analog inputs and record directly to DVDs. There are many brands & models to choose from and many good ones are as inexpensive as the $100 you spent on the Pinnacle converter.

Elgato video capture versus digital 8 camcorder to import hi 8 movies

Hi!
I have hi 8 video tapes which i want to import into my MacBook.
I would like to work on them with iMovie 09, cut them, set titles etc. put music on and so on.
Earlier I plugged my hi 8 camcorder into my panasonic DMR E85H dvd recorder with built in hdd.
Then i importet them via handbrake into my MacBook.
Then i importet them into iMovie 08 an did some cutting and so on.
Then i recognized, that there where horizontal interferences in the movie.
On the dvds the video is ok!
It doesn´t matter if i play the videos in Quicktime or in iTunes or iMovie.
If i would use a Elgato Video Capture to import or a digital 8 camcorder to import the videos to my MacBook would i be able to get a better result?
Which one should i prefer - i have to buy each of them!
Would the size of the camcorder-imported videos be bigger then with the Elgato device?
Now i´m using iMovie 09.
Thanks a lot for helping me out!

Based on your comments about horizontal interferences, it may be that you are seeing interlace artifacts. The solution may be to deinterlace the clips.
You might try checking the settings in handbrake to deinterlace.
You might also take the clip you have produced in HB and deinterlacing using a free tool like MPEG Streamclip or JES Deinterlacer.
Your MPEG2 on DVD is already compressed from the original on tape. Then HandBrake decompresses and recompresses it to h.264. You generally want to cut out compression steps in your workflow whenever possible, because each generation of compression will introduce noise and loss.
You could also reimport from DVD using MPEG Streamclip (and the Apple QuickTime MPEG2 Playback Component). You could deinterlace at this step if needed.
You could certainly import through a camcorder with passthru capability. It will be DV which will be a very high data rate and potentially high quality, but it will never be higher quality than the underlying analog material. But you will have eliminated a compression step so you will be closer to the original.
ElGato products will certainly work as well. I use the ElGato EyeTV hybrid to capture from a VHS Deck, as well as to record high definition TV shows. My ElGato will capture to MPEG2, although the newer models may capture directly to MPEG4 (not sure). You would then use the ElGato software to export to iMovie in an editable format such as h.264 or Apple Intermediate Codec.

Detecting Video Capture Devices without Installing JMF

Hi All,
I want to detect the video capture devices, without installing the JMF.
I had included the jmf (windows version) in lib path in netbeans ide. I am able to detect the audio capture device. But unable to detect the video capture devices. But if I install the JMF, I am able to detect the Video Capture devices in My system. Can anyone help me?
Thanks,
Vinoth Kumar.

YES! Please take a look at SIP Communicator project. They have all what u want.
The main idea is copy all .dll files to System or System32 (Please check files which JMF will copy to ur computer and where).
U need to have jmf.jar and sound.jar too ( maybe more) in your computer.
Your program should have DirectSoundAuto.java, JavaSoundAuto.java, JavaSoundDetector.java, JMFInit.java. Those files are in JMStudio source code. They are used to detect all capture devices and register it to JMF, but wait !!! where they will be saved? In order to save information about capture devices which are detected, you should create "jmf.properties" file in the same location with jmf.jar.Therefore, u should modify the JMFInit.java so it can check if the "jmf.properties" exists. If it's not, you have to create it.
Check SIP Communicator at Folder "media" then "device". They have modified those files I mentioned above and created some new files to SC can detect more devices.
Edited by: tamngminh on Sep 16, 2008 9:50 AM

Video capture driver for MSI GeForce 2 Pro video card

Hi,
I am in need of the nVidia WDM video capture driver for my Geforce 2 Pro video card. Model #M-8831. I was able to download it from the MSI/TW website over a year ago just fine. My computer crashed from a game bug a couple of months ago and MSI/TW does not list the capture driver I need any longer. I did email the company asking for help with no response back yet (after 2 weeks). You people may be my last hope.
I do have the cd that came with the video card, but I've never been able to install the capture driver from it. There is a button to install it, but it never gets loaded. I've tried browsing the cd and also tried installing it using the windows wizards with zero results. My only successful install was from the MSI home website.
If you need more information, please let me know.
Thank you,
Bruce ?(

If you followed the second link it says this:
Windows XP/2000/Me/98SE - WDM Driver v1.22
Version: 1.22
File Size: 1.1 MB
Release Date: December 9, 2002
Downloads
» Primary Download Site «
» Mirror Site 1
» Mirror Site 2
» Mirror Site 3
Release Highlights:
First stand-alone WDM driver release for Personal Cinema and VIVO-enabled products.
Right there at the end it says Release Highlights and says specifically that it's what you want...
Read my man, read...
Cheers!! 8)

Video capture Cables with MSI StarForce 822 GeForce 3!

I have the VT64D and I woiuld very much like to know where to find the cables for this card, I need the A/V Cables... as I would like to have the full benefit of sound as well...
If anybody has this calbe/breakout box I would be Extremely interested in purchasing it...
Thanks,
Marc
PS: Its the second revision of Starforce 8822

If you have the Video Capture Driver installed then the video capture program should see it. On MSI site version 1.16 of the driver is available for download.
If you still have problems (e.g. too many frames lost) you can try using Virtual VCR (worked best in my case).

Video Capture Problems HELP!

Ok i just bought a MSI GeForce4 Ti4200-VTD8X, Wich got Tv_Out + Video_in
With the card i got a Tv_out/Video_in connecter to plug in the card, now the problem seems to come, i plug my S-video cable behind my Tv_out/Video_in connecter (wich of course is connectet to my graphics adapter) and the other end of the S-video cable into a SCART Adapter wich i plug into the scart output on my VCR, but when i start any video capture software, it just says no device connectet plz HELP me! :(

Never mind, got it working all by myself now

How to connect a video capture device to Satellite M30X 127

I'm going around in circles trying to find a video capture device that will function with a laptop and would be grateful for advice. By way of example, I'm now looking at the 'Canopus ADVC-110', although still looking around (but not Pinnacle, who seem to have a terrible reputation for capture items).
Problems include:
1. Main problem is - many video capture external devices require a 'line-in' to PC for good quality audio transfer. This laptop doesn't have a line in, only the mike and headphone jacks. In addition, I've also tried a few RCA pins in the 3.5mm microphone/headphones jack and they were too small. How to solve the problem of getting audio from vcr to my PC?
2. The ADVC-110 connects to the PC via Firewire (and S-video), but is a SIX-pin type. M30X is a FOUR-pin type. Are there adapters available?
3. Some capture programmes seem to require huge capacity of RAM. Is a laptop going to be suitable to do the job? (I simply want to capture old vhs tapes from vcr to PC, then burn to DVD with Nero 7 or similar).
Thanks in advance!

Hello
You are right! You must use external device for signal transfer to your notebook. I dont know where you have this info but I have good experiences with Pinnacle product. For data transfer I have used USB port.
'Canopus ADVC-110 is not known to me but I dont see any reason why this should not work well. Use delivered software for video capturing and there should not be any problem.
Only thing is that after recording the whole video material must be prepared for burning and unit need a lot of power to do this well und fast. When you buy this and want to use on right way I recommend you to expand RAM to 1GB.
Compatible memory modules for your Satellite M30x are:
PC2700 512MB (PA3312U-1M51)
PC2700 1024MB (PA3313U-1M1G)
Bye

USB2.0 Video Capture Controller

Similar Messages

Maybe you are looking for