USB2DVI adaptor window refresh problem

Good evening together, I am experiencing strange issue with the Lenovo USB2DVI adaptor connected to a 24" Lenovo monitor. The screen is recognised without problems and displays the running programs without problems. There are 2 so far identified exceptions, though: Visual Studio 2010 Mozilla Firefox Moving these two programs to the screen driven from the USB, there are some serious issues with window refresh (it is never complete). Maximising the program window can lead up to the total lost of control over that program (task manager kill is from time to time necessary). I can observe the same issue on two different Lenovo notebooks (albeit with the same USB2DVI device). Would anyone know what is going on? The driver is up to date. Thanks, Lubos

hmm dell would only launch X using the intel drivers and I"m having the same problem with compiz fusion that you had. My windows don't update themselves. It's quite frustrating.

Similar Messages

Composite windows manager window refresh problem

Hello, I'm a very satisfied user of Arch Linux, and I would like to say it is la creme de la creme (the best) distribution for users that wish to control their system (and not vice versa).
However, recently, I had some strange problems with compiz fusion, beryl, and even xcompmgr. I'm using xorg from testing, I do not have a xorg.conf, and I have a GMA 3100 IGP. Compiz fusion was working correctly, without xorg.conf, and after I did the upgrade to kernel 2.6.23 (the day the package was put online), compiz-fusion started to have quite weird problems. It is not kernel related, I compiled my own 2.6.23 kernel, then a 2.6.22.9, and it just did not work as expected.
When I move windows, decoration and the window is just fine. However, the windows stop refreshing (I have to shade the window to refresh it), and when I scale it (not the compiz plugin), the decoration and the window just stretches, and then it refreshes sometimes. I was not able to do a decent video capture of my screen, but I hope the description gives you an idea of the problem. I tried with a xorg.conf, setting xaa acceleration, setting "XAANoOffscreenPixmap" xorg.conf option, adding my user into the video group using gpasswd, and I must admit, it changes nothing.
xorg log:
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/noaarch:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
X.Org X Server 1.4.0
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-rc1-ARCH i686
Current Operating System: Linux noaarch 2.6.23.1-rt11vk1 #2 SMP PREEMPT RT Fri Nov 9 16:42:08 EST 2007 i686
Build Date: 07 November 2007 11:19:12AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 13 20:14:53 2007
(EE) Unable to locate/open config file
(II) Loader magic: 0x81d4540
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,29c0 card 1458,5000 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,29c2 card 1458,d000 rev 02 class 03,00,00 hdr 00
(II) PCI: 00:1a:0: chip 8086,2937 card 1458,5004 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1a:1: chip 8086,2938 card 1458,5004 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1a:2: chip 8086,2939 card 1458,5004 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1a:7: chip 8086,293c card 1458,5006 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1b:0: chip 8086,293e card 1458,a002 rev 02 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,2940 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:4: chip 8086,2948 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:5: chip 8086,294a card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2934 card 1458,5004 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2935 card 1458,5004 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,2936 card 1458,5004 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,293a card 1458,5006 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 92 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,2916 card 1458,5001 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,2922 card 1458,b005 rev 02 class 01,06,01 hdr 00
(II) PCI: 00:1f:3: chip 8086,2930 card 1458,5001 rev 02 class 0c,05,00 hdr 00
(II) PCI: 02:00:0: chip 197b,2368 card 1458,b000 rev 00 class 01,01,85 hdr 00
(II) PCI: 03:00:0: chip 10ec,8168 card 1458,e000 rev 01 class 02,00,00 hdr 00
(II) PCI: 04:00:0: chip 1131,7130 card 18d0,2100 rev 01 class 04,80,00 hdr 00
(II) PCI: 04:01:0: chip 1274,5880 card 1274,8001 rev 02 class 04,01,00 hdr 00
(II) PCI: 04:07:0: chip 104c,8024 card 1458,1000 rev 00 class 0c,00,10 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,4), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:28:0), (0,1,1), BCTRL: 0x0000 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:4), (0,2,2), BCTRL: 0x0000 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000b000 - 0x0000bfff (0x1000) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xf0000000 - 0xf0ffffff (0x1000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:28:5), (0,3,3), BCTRL: 0x0000 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x0000c000 - 0x0000cfff (0x1000) IX[b]
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xf1000000 - 0xf2ffffff (0x2000000) MX[b]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0x20000000 - 0x200fffff (0x100000) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:30:0), (0,4,4), BCTRL: 0x0000 (VGA_EN is cleared)
(II) Bus 4 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[b]
(II) Bus 4 non-prefetchable memory range:
[0] -1 0 0xf3100000 - 0xf31fffff (0x100000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:2:0) Intel Corporation 82G33/G31 Express Integrated Graphics Controller rev 2, Mem @ 0xf3200000/19, 0xe0000000/28, 0xf3000000/20, I/O @ 0xe100/3
New driver is "i810"
(==) Using default built-in configuration (55 lines)
(==) --- Start of built-in configuration ---
Section "Module"
Load "extmod"
Load "dbe"
Load "glx"
Load "freetype"
Load "type1"
Load "record"
Load "dri"
EndSection
Section "Monitor"
Identifier "Builtin Default Monitor"
EndSection
Section "Device"
Identifier "Builtin Default i810 Device 0"
Driver "i810"
EndSection
Section "Screen"
Identifier "Builtin Default i810 Screen 0"
Device "Builtin Default i810 Device 0"
Monitor "Builtin Default Monitor"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
Monitor "Builtin Default Monitor"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
Monitor "Builtin Default Monitor"
EndSection
Section "Device"
Identifier "Builtin Default vga Device 0"
Driver "vga"
EndSection
Section "Screen"
Identifier "Builtin Default vga Screen 0"
Device "Builtin Default vga Device 0"
Monitor "Builtin Default Monitor"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default i810 Screen 0"
Screen "Builtin Default fbdev Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default vga Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default i810 Screen 0" (0)
(**) | |-->Monitor "Builtin Default Monitor"
(**) | |-->Device "Builtin Default i810 Device 0"
(**) |-->Screen "Builtin Default fbdev Screen 0" (1)
(**) | |-->Monitor "Builtin Default Monitor"
(**) | |-->Device "Builtin Default fbdev Device 0"
(**) |-->Screen "Builtin Default vesa Screen 0" (2)
(**) | |-->Monitor "Builtin Default Monitor"
(**) | |-->Device "Builtin Default vesa Device 0"
(**) |-->Screen "Builtin Default vga Screen 0" (3)
(**) | |-->Monitor "Builtin Default Monitor"
(**) | |-->Device "Builtin Default vga Device 0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(==) |-->Input Device "<default pointer>"
(==) |-->Input Device "<default keyboard>"
(==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
(==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xf3100000 - 0xf3103fff (0x4000) MX[b]
[1] -1 0 0xf3104000 - 0xf31047ff (0x800) MX[b]
[2] -1 0 0xf3105000 - 0xf31053ff (0x400) MX[b]
[3] -1 0 0xf2000000 - 0xf2000fff (0x1000) MX[b]
[4] -1 0 0xf3287000 - 0xf32870ff (0x100) MX[b]
[5] -1 0 0xf3286000 - 0xf32867ff (0x800) MX[b]
[6] -1 0 0xf3284000 - 0xf32843ff (0x400) MX[b]
[7] -1 0 0xf3280000 - 0xf3283fff (0x4000) MX[b]
[8] -1 0 0xf3285000 - 0xf32853ff (0x400) MX[b]
[9] -1 0 0xf3000000 - 0xf30fffff (0x100000) MX[b](B)
[10] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
[11] -1 0 0xf3200000 - 0xf327ffff (0x80000) MX[b](B)
[12] -1 0 0x0000d000 - 0x0000d03f (0x40) IX[b]
[13] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b]
[14] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[b]
[15] -1 0 0x0000b300 - 0x0000b303 (0x4) IX[b]
[16] -1 0 0x0000b200 - 0x0000b207 (0x8) IX[b]
[17] -1 0 0x0000b100 - 0x0000b103 (0x4) IX[b]
[18] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[b]
[19] -1 0 0x00000500 - 0x0000051f (0x20) IX[b]
[20] -1 0 0x0000eb00 - 0x0000eb1f (0x20) IX[b]
[21] -1 0 0x0000ea00 - 0x0000ea03 (0x4) IX[b]
[22] -1 0 0x0000e900 - 0x0000e907 (0x8) IX[b]
[23] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[b]
[24] -1 0 0x0000e700 - 0x0000e707 (0x8) IX[b]
[25] -1 0 0x0000e500 - 0x0000e51f (0x20) IX[b]
[26] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[b]
[27] -1 0 0x0000e300 - 0x0000e31f (0x20) IX[b]
[28] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[29] -1 0 0x0000e600 - 0x0000e61f (0x20) IX[b]
[30] -1 0 0x0000e200 - 0x0000e21f (0x20) IX[b]
[31] -1 0 0x0000e100 - 0x0000e107 (0x8) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xf3100000 - 0xf3103fff (0x4000) MX[b]
[1] -1 0 0xf3104000 - 0xf31047ff (0x800) MX[b]
[2] -1 0 0xf3105000 - 0xf31053ff (0x400) MX[b]
[3] -1 0 0xf2000000 - 0xf2000fff (0x1000) MX[b]
[4] -1 0 0xf3287000 - 0xf32870ff (0x100) MX[b]
[5] -1 0 0xf3286000 - 0xf32867ff (0x800) MX[b]
[6] -1 0 0xf3284000 - 0xf32843ff (0x400) MX[b]
[7] -1 0 0xf3280000 - 0xf3283fff (0x4000) MX[b]
[8] -1 0 0xf3285000 - 0xf32853ff (0x400) MX[b]
[9] -1 0 0xf3000000 - 0xf30fffff (0x100000) MX[b](B)
[10] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
[11] -1 0 0xf3200000 - 0xf327ffff (0x80000) MX[b](B)
[12] -1 0 0x0000d000 - 0x0000d03f (0x40) IX[b]
[13] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b]
[14] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[b]
[15] -1 0 0x0000b300 - 0x0000b303 (0x4) IX[b]
[16] -1 0 0x0000b200 - 0x0000b207 (0x8) IX[b]
[17] -1 0 0x0000b100 - 0x0000b103 (0x4) IX[b]
[18] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[b]
[19] -1 0 0x00000500 - 0x0000051f (0x20) IX[b]
[20] -1 0 0x0000eb00 - 0x0000eb1f (0x20) IX[b]
[21] -1 0 0x0000ea00 - 0x0000ea03 (0x4) IX[b]
[22] -1 0 0x0000e900 - 0x0000e907 (0x8) IX[b]
[23] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[b]
[24] -1 0 0x0000e700 - 0x0000e707 (0x8) IX[b]
[25] -1 0 0x0000e500 - 0x0000e51f (0x20) IX[b]
[26] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[b]
[27] -1 0 0x0000e300 - 0x0000e31f (0x20) IX[b]
[28] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[29] -1 0 0x0000e600 - 0x0000e61f (0x20) IX[b]
[30] -1 0 0x0000e200 - 0x0000e21f (0x20) IX[b]
[31] -1 0 0x0000e100 - 0x0000e107 (0x8) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xf3100000 - 0xf3103fff (0x4000) MX[b]
[5] -1 0 0xf3104000 - 0xf31047ff (0x800) MX[b]
[6] -1 0 0xf3105000 - 0xf31053ff (0x400) MX[b]
[7] -1 0 0xf2000000 - 0xf2000fff (0x1000) MX[b]
[8] -1 0 0xf3287000 - 0xf32870ff (0x100) MX[b]
[9] -1 0 0xf3286000 - 0xf32867ff (0x800) MX[b]
[10] -1 0 0xf3284000 - 0xf32843ff (0x400) MX[b]
[11] -1 0 0xf3280000 - 0xf3283fff (0x4000) MX[b]
[12] -1 0 0xf3285000 - 0xf32853ff (0x400) MX[b]
[13] -1 0 0xf3000000 - 0xf30fffff (0x100000) MX[b](B)
[14] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
[15] -1 0 0xf3200000 - 0xf327ffff (0x80000) MX[b](B)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x0000d000 - 0x0000d03f (0x40) IX[b]
[19] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b]
[20] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[b]
[21] -1 0 0x0000b300 - 0x0000b303 (0x4) IX[b]
[22] -1 0 0x0000b200 - 0x0000b207 (0x8) IX[b]
[23] -1 0 0x0000b100 - 0x0000b103 (0x4) IX[b]
[24] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[b]
[25] -1 0 0x00000500 - 0x0000051f (0x20) IX[b]
[26] -1 0 0x0000eb00 - 0x0000eb1f (0x20) IX[b]
[27] -1 0 0x0000ea00 - 0x0000ea03 (0x4) IX[b]
[28] -1 0 0x0000e900 - 0x0000e907 (0x8) IX[b]
[29] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[b]
[30] -1 0 0x0000e700 - 0x0000e707 (0x8) IX[b]
[31] -1 0 0x0000e500 - 0x0000e51f (0x20) IX[b]
[32] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[b]
[33] -1 0 0x0000e300 - 0x0000e31f (0x20) IX[b]
[34] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[35] -1 0 0x0000e600 - 0x0000e61f (0x20) IX[b]
[36] -1 0 0x0000e200 - 0x0000e21f (0x20) IX[b]
[37] -1 0 0x0000e100 - 0x0000e107 (0x8) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "type1" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "i810"
(II) Loading /usr/lib/xorg/modules/drivers//i810_drv.so
(II) Module i810: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 2.1.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "vga"
(WW) Warning, couldn't open module vga
(II) UnloadModule: "vga"
(EE) Failed to load module "vga" (module does not exist, 0)
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, 965G, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(--) Chipset G33 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xf3100000 - 0xf3103fff (0x4000) MX[b]
[5] -1 0 0xf3104000 - 0xf31047ff (0x800) MX[b]
[6] -1 0 0xf3105000 - 0xf31053ff (0x400) MX[b]
[7] -1 0 0xf2000000 - 0xf2000fff (0x1000) MX[b]
[8] -1 0 0xf3287000 - 0xf32870ff (0x100) MX[b]
[9] -1 0 0xf3286000 - 0xf32867ff (0x800) MX[b]
[10] -1 0 0xf3284000 - 0xf32843ff (0x400) MX[b]
[11] -1 0 0xf3280000 - 0xf3283fff (0x4000) MX[b]
[12] -1 0 0xf3285000 - 0xf32853ff (0x400) MX[b]
[13] -1 0 0xf3000000 - 0xf30fffff (0x100000) MX[b](B)
[14] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
[15] -1 0 0xf3200000 - 0xf327ffff (0x80000) MX[b](B)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x0000d000 - 0x0000d03f (0x40) IX[b]
[19] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b]
[20] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[b]
[21] -1 0 0x0000b300 - 0x0000b303 (0x4) IX[b]
[22] -1 0 0x0000b200 - 0x0000b207 (0x8) IX[b]
[23] -1 0 0x0000b100 - 0x0000b103 (0x4) IX[b]
[24] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[b]
[25] -1 0 0x00000500 - 0x0000051f (0x20) IX[b]
[26] -1 0 0x0000eb00 - 0x0000eb1f (0x20) IX[b]
[27] -1 0 0x0000ea00 - 0x0000ea03 (0x4) IX[b]
[28] -1 0 0x0000e900 - 0x0000e907 (0x8) IX[b]
[29] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[b]
[30] -1 0 0x0000e700 - 0x0000e707 (0x8) IX[b]
[31] -1 0 0x0000e500 - 0x0000e51f (0x20) IX[b]
[32] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[b]
[33] -1 0 0x0000e300 - 0x0000e31f (0x20) IX[b]
[34] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[35] -1 0 0x0000e600 - 0x0000e61f (0x20) IX[b]
[36] -1 0 0x0000e200 - 0x0000e21f (0x20) IX[b]
[37] -1 0 0x0000e100 - 0x0000e107 (0x8) IX[b](B)
(--) Assigning device section with no busID to primary device
(--) Chipset vesa found
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xf3100000 - 0xf3103fff (0x4000) MX[b]
[5] -1 0 0xf3104000 - 0xf31047ff (0x800) MX[b]
[6] -1 0 0xf3105000 - 0xf31053ff (0x400) MX[b]
[7] -1 0 0xf2000000 - 0xf2000fff (0x1000) MX[b]
[8] -1 0 0xf3287000 - 0xf32870ff (0x100) MX[b]
[9] -1 0 0xf3286000 - 0xf32867ff (0x800) MX[b]
[10] -1 0 0xf3284000 - 0xf32843ff (0x400) MX[b]
[11] -1 0 0xf3280000 - 0xf3283fff (0x4000) MX[b]
[12] -1 0 0xf3285000 - 0xf32853ff (0x400) MX[b]
[13] -1 0 0xf3000000 - 0xf30fffff (0x100000) MX[b](B)
[14] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
[15] -1 0 0xf3200000 - 0xf327ffff (0x80000) MX[b](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x0000d000 - 0x0000d03f (0x40) IX[b]
[22] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b]
[23] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[b]
[24] -1 0 0x0000b300 - 0x0000b303 (0x4) IX[b]
[25] -1 0 0x0000b200 - 0x0000b207 (0x8) IX[b]
[26] -1 0 0x0000b100 - 0x0000b103 (0x4) IX[b]
[27] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[b]
[28] -1 0 0x00000500 - 0x0000051f (0x20) IX[b]
[29] -1 0 0x0000eb00 - 0x0000eb1f (0x20) IX[b]
[30] -1 0 0x0000ea00 - 0x0000ea03 (0x4) IX[b]
[31] -1 0 0x0000e900 - 0x0000e907 (0x8) IX[b]
[32] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[b]
[33] -1 0 0x0000e700 - 0x0000e707 (0x8) IX[b]
[34] -1 0 0x0000e500 - 0x0000e51f (0x20) IX[b]
[35] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[b]
[36] -1 0 0x0000e300 - 0x0000e31f (0x20) IX[b]
[37] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[38] -1 0 0x0000e600 - 0x0000e61f (0x20) IX[b]
[39] -1 0 0x0000e200 - 0x0000e21f (0x20) IX[b]
[40] -1 0 0x0000e100 - 0x0000e107 (0x8) IX[b](B)
[41] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[42] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) intel(0): Creating default Display subsection in Screen section
"Builtin Default i810 Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (==) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) G33
(--) intel(0): Chipset: "G33"
(--) intel(0): Linear framebuffer at 0xE0000000
(--) intel(0): IO registers at addr 0xF3200000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using XAA for acceleration
(--) intel(0): Will try to allocate texture pool for old Mesa 3D driver.
(II) intel(0): Will try to reserve 32768 kiB of AGP aperture space
for the DRM memory manager.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Builtin Default Monitor
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): Output VGA connected
(II) intel(0): Output VGA using initial mode 1360x768
(II) intel(0): detected 1024 kB GTT.
(II) intel(0): detected 7164 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xf3000000 - 0xf30fffff (0x100000) MS[b]
[1] 0 0 0xe0000000 - 0xefffffff (0x10000000) MS[b]
[2] 0 0 0xf3200000 - 0xf327ffff (0x80000) MS[b]
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[7] -1 0 0xf3100000 - 0xf3103fff (0x4000) MX[b]
[8] -1 0 0xf3104000 - 0xf31047ff (0x800) MX[b]
[9] -1 0 0xf3105000 - 0xf31053ff (0x400) MX[b]
[10] -1 0 0xf2000000 - 0xf2000fff (0x1000) MX[b]
[11] -1 0 0xf3287000 - 0xf32870ff (0x100) MX[b]
[12] -1 0 0xf3286000 - 0xf32867ff (0x800) MX[b]
[13] -1 0 0xf3284000 - 0xf32843ff (0x400) MX[b]
[14] -1 0 0xf3280000 - 0xf3283fff (0x4000) MX[b]
[15] -1 0 0xf3285000 - 0xf32853ff (0x400) MX[b]
[16] -1 0 0xf3000000 - 0xf30fffff (0x100000) MX[b](B)
[17] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
[18] -1 0 0xf3200000 - 0xf327ffff (0x80000) MX[b](B)
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[22] 0 0 0x0000e100 - 0x0000e107 (0x8) IS[b]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[24] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[25] -1 0 0x0000d000 - 0x0000d03f (0x40) IX[b]
[26] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b]
[27] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[b]
[28] -1 0 0x0000b300 - 0x0000b303 (0x4) IX[b]
[29] -1 0 0x0000b200 - 0x0000b207 (0x8) IX[b]
[30] -1 0 0x0000b100 - 0x0000b103 (0x4) IX[b]
[31] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[b]
[32] -1 0 0x00000500 - 0x0000051f (0x20) IX[b]
[33] -1 0 0x0000eb00 - 0x0000eb1f (0x20) IX[b]
[34] -1 0 0x0000ea00 - 0x0000ea03 (0x4) IX[b]
[35] -1 0 0x0000e900 - 0x0000e907 (0x8) IX[b]
[36] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[b]
[37] -1 0 0x0000e700 - 0x0000e707 (0x8) IX[b]
[38] -1 0 0x0000e500 - 0x0000e51f (0x20) IX[b]
[39] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[b]
[40] -1 0 0x0000e300 - 0x0000e31f (0x20) IX[b]
[41] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[42] -1 0 0x0000e600 - 0x0000e61f (0x20) IX[b]
[43] -1 0 0x0000e200 - 0x0000e21f (0x20) IX[b]
[44] -1 0 0x0000e100 - 0x0000e107 (0x8) IX[b](B)
[45] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[46] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 109824 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 439292 kB available
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers and
large DRI memory manager reservation:
(II) intel(0): Allocating 5100 scanlines for pixmap cache
(II) intel(0): Success.
(II) intel(0): Increasing the scanline pitch to allow tiling mode (1408 -> 2048).
(II) intel(0): Memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
(II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
(II) intel(0): 0x00032000-0x00032fff: overlay registers (4 kB)
(II) intel(0): 0x00033000-0x00033fff: G33 hw status (4 kB)
(II) intel(0): 0x00040000-0x032b7fff: front buffer (51680 kB)
(II) intel(0): 0x006ff000: end of stolen memory
(II) intel(0): 0x032b8000-0x032c7fff: xaa scratch (64 kB)
(II) intel(0): 0x04000000-0x04ffffff: back buffer (10880 kB)
(II) intel(0): 0x05000000-0x05ffffff: depth buffer (10880 kB)
(II) intel(0): 0x06000000-0x07ffffff: DRI memory manager (32768 kB)
(II) intel(0): 0x08000000-0x09ffffff: textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): front buffer is not tiled
(II) intel(0): back buffer is tiled
(II) intel(0): depth buffer is tiled
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer handle = 0xe0040000
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(II) intel(0): Unable to use TTM-based memory manager with DRM version 1.6
(II) intel(0): [drm] Registers = 0xf3200000
(II) intel(0): [drm] ring buffer = 0xe0000000
(II) intel(0): [drm] init sarea width,height = 1360 x 1360 (pitch 2048)
(II) intel(0): [drm] Mapping front buffer
(II) intel(0): [drm] Front Buffer = 0x2c008000
(II) intel(0): [drm] Back Buffer = 0xe4000000
(II) intel(0): [drm] Depth Buffer = 0xe5000000
(II) intel(0): [drm] textures = 0xe8000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(==) intel(0): Write-combining range (0xe0000000,0x10000000)
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) intel(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x006ff000 (pgoffset 1791)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x032b8000 (pgoffset 12984)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x04000000 (pgoffset 16384)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x05000000 (pgoffset 20480)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x08000000 (pgoffset 32768)
(WW) intel(0): ESR is 0x00000010, page table error
(WW) intel(0): PGTBL_ER is 0x00010000, overlay GTT PTE
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): Set up overlay video
(II) intel(0): [DRI] installation complete
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): direct rendering: Enabled
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 359 x 203
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: Setting Device option to "/dev/input/mice"
(--) <default pointer>: Device: "/dev/input/mice"
(==) <default pointer>: Protocol: "Auto"
(**) Option "CorePointer"
(**) <default pointer>: always reports core events
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(**) <default pointer>: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) <default keyboard>: always reports core events
(**) Option "Protocol" "standard"
(**) <default keyboard>: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) <default keyboard>: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) <default keyboard>: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) <default keyboard>: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) <default keyboard>: CustomKeycodes disabled
(II) evaluating device (<default keyboard>)
(II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD)
(II) evaluating device (<default pointer>)
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
(--) <default pointer>: PnP-detected protocol: "ExplorerPS/2"
(II) <default pointer>: ps2EnableDataReporting: succeeded
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
Oh, I forgot to tell that compiz outputs no error messages.
Also, I find it weird that xorg uses the i810 driver, as I only have the "intel" driver installed.
Last edited by Synthetix (2007-11-14 01:21:15)

hmm dell would only launch X using the intel drivers and I"m having the same problem with compiz fusion that you had. My windows don't update themselves. It's quite frustrating.

Window refreshing problem in Mail 2

Hi all,
when I open a message, it appears truncated. The "hidden" part becomes visible only after I have resized the window, or after I have checked "Long Headers". This seems to appear only (?) for multi-part messages in MIME format.
Any idea of what's going on?
Thanks in advance for your help.
- Gerard

Just found this on the broken Search...
http://www.macosxhints.com/article.php?story=20080201111317585
I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, Reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
At least if it doesn't fix it, it'll eliminate a few questions.
Message was edited by: BDAqua

EA3 - SQL History window refresh problem

Hi, I have noticed that version 1.2 (possibly farther back) up to and including 1.5 EA3 have a issue with refreshing the SQL history window in a special scenario.
If the tab is completely undocked from SQL developer and then expanded across two monitors, as I scroll down the parts of the data rows on the non-primary monitor are not refreshed and become jagged.
I am running SQL developer on Win XP SP2 with whatever version of Java came with EA3.

Thanks, that seemed to work. It looks like Java is painting the grid in two parts now, with the non-default monitor side being second, but at least it repaints.
As far as a default, I did already have the following option in the config file:
AddVMOption -Dsun.java2d.ddoffscreen=false
I don't what difference the -J option makes but that's what I had. Thanks again.

Screen refresh problem with Windows 7

Hello all,
I've recently begun testing Oracle with Windows 7 on a new HP 2540p notebook computer. I've encountered a very strange issue so far. After logging into Oracle, and Windows switches to Windows Basic theme, I should be taken to the main Navigator screen. But instead, the screen is simply white. If I drag (or nudge) the title bar just a bit, the screen refreshes and I can see the menu items. Then if I click on something (or even use hotkeys - ALT+F to get the file menu, for example), I don't see anything happen. But if I move the window just a bit, the screen refreshes and I can see that it did actually take my input, it just didn't re-draw the screen. I'm wondering if this may be a graphics driver issue (I do have the latest driver for the Intel Graphics Media Accelerator HD adapter), or if someone could point me toward a resolution to this problem. Any help is much appreciated.

Dear All,
Same problem of REFRESH PROBLEM also faced by but only a single and specific Windows 7 client.
if you have resolved the issue , so please share with us.
Thanks
Eidy

Animated gif and page refresh problem

Animated gif and page refresh problem
Hi There,
I'm trying to build a simple "Please wait......" screen using jsp and javascript.
So far all is going well except that my animatate gif keeps refreshing everything the page is refresh.
Is there a way the i can prevent the body of the page from refreshing?
below is my sample code:
<%@taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%>
<jsp:useBean id="StatusBean" class="com1.CandidateRelease" scope="session"/>
<html>
<script LANGUAGE="JavaScript">
function refresh()
<% if (StatusBean.isRunning()) { %>
     //setTimeout("refresh()", 1000);
     setTimeout("location='status.jsf'", 1000);
<% }else{%>
     window.location= "busStopAdmin.jsf";
<%} %>
</script>
<head>
     <script LANGUAGE="JavaScript">
          refresh();
     </script>
</head>
<body>
     <img id="myImage" src="../img/ojp_wait.gif" alt="" width="151" height="36">
</body>
</html>

Animated gif and page refresh problem
Hi There,
I'm trying to build a simple "Please wait......" screen using jsp and javascript.
So far all is going well except that my animatate gif keeps refreshing everything the page is refresh.
Is there a way the i can prevent the body of the page from refreshing?
below is my sample code:
<%@taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%>
<jsp:useBean id="StatusBean" class="com1.CandidateRelease" scope="session"/>
<html>
<script LANGUAGE="JavaScript">
function refresh()
<% if (StatusBean.isRunning()) { %>
     //setTimeout("refresh()", 1000);
     setTimeout("location='status.jsf'", 1000);
<% }else{%>
     window.location= "busStopAdmin.jsf";
<%} %>
</script>
<head>
     <script LANGUAGE="JavaScript">
          refresh();
     </script>
</head>
<body>
     <img id="myImage" src="../img/ojp_wait.gif" alt="" width="151" height="36">
</body>
</html>

IOS 7 multitasking why do the app windows refresh, I can't copy and paste. If the associated app window keeps refreshing

iOS 7 multitasking why do the app windows refresh, I can't copy and paste. If the associated app window keeps refreshing

Try. Going to
Settings
General
Background App refresh and turn off the ones giving you problem.

Window Refreshes when I hover mouse over pdf file

I have Reader 9 (but the problem happens no matter what version I've tried to install), any time my mouse hovers over a pdf file the windows explorer window refreshes, if I select the file it refreshes and everything is unselected, if I have scrolled to the bottom of the window and even hover over a pdf file, it refreshes and I'm back at the top of the list.
However, if I select a file it refreshes and then I select that file again, it is fine. It must have something to do with the preview therefore.
Thanks for your help.

The answers are always so simple. Now, if only I could figure out why I couldn't figure out (or find) the answer myself....
I thank you very much Dave

Refresh problem with dreamweaver cs5.5

Hello, I hope someone can help out soon with my problem. We currently have a great running site that is hosted OFFSITE. Our programmer built a new site which is the one having the refresh problems with. It's hosted on an ON-SIGHT server . thank you
Problem:
Sometimes randomly, but almost always when opening other pages, DW freezes for about 5-10 seconds, sometimes crashing (presumably when it takes longer).
It occurs whether changes are made to files or not. I'm using split view it happens mostly whien trying to click something in code view at top.
Test Results:
I was able to consistently reproduce the problem when opening files in the directory.
I was unable to reproduce the problem when opening multiple Include files (that do not use templates).
Thoughts:
Is there something in the template causing the refresh problem?
Something in the new website page source, or in their shared template, may be loading from a (slow) external resource.
Something in the DW settings?
HELP THANK YOU

Could you post a screen capture of your File > New dialogue window when you choose it from the menu?
Page From Template should be an option on the far left if I recall correctly (it has been changed in newer versions, but I think 5.5 still used this method). You won't see it in the Welcome Screen or if you hit Ctrl +N. You have to use the menu option to select New...
You should then be presented with a list of sites, when the site is chosen, the templates should show in the middle column.
Or are you saying your template isn't showing when you choose the Page From Template option and select the site?

Odd window redraw problem...

This just starting happening so I'm wondering if anyone else is experiencing this.
In Dreamweaver CS5, I normally work on a few pages at a time, all in tabs and I use split screen to see the code and design. Now, if I'm on one tab and then click on another tab to switch to that page, it does switch, but the window goes grey until I click a second time on the tab, then the window refreshes and I can see the content.
I'm attaching an image of what it looks like when I say the screen is grey:
Then on the second click, my window redraws to this (I had to blur the content):
I can't seem to find a setting that would have done this and the only change I've made to the system is clear the font cache, but I can't imagine how that would affect it.
Any help would be great.

Have you tried starting in Safe Mode and see if the problem still occurs?
Restart holding the "shift" key.
(Expect it to take longer to start this way because it runs a directory check first.)
If this works look in System Preferences > Users & Groups > Login items and delete any third party login items (-), you can always add them back with the (+). Also look in /Library/Startup Items. Nothing is put in that folder by default, so anything in there is yours.

Console Refresh Problem

Hi All,
I have a minor, but annoying refresh issue in the SCVMM console.
I have one particular hyper-v cluster which for which the console is unable to refresh the overview, the wheel spins forever. The daily & monthly performance portions refresh ok. This only happens for one cluster and is irrespective of the
user and machine the console is running from.
Any input appreciated.
Stu

Hi,
normally to find out why it is stuck a ETL trace is needed from the VMM Server. There aren't any known issues in Windows Server 2012 R2 OS and SCVMM 2012R2 combination as far as I know regarding the refresh problem. Are there any hints on the VMM Server
like failed Jobs regarding this problem ? Additionally did you check the Cluster Nodes VMM Event Logs ?
Regards,
Cengiz Kuskaya

How to format windows 8 without CD, when Windows refresh and remove doesnt responding?

I have a problem with my windows 8 - suddenly C driver turns to NTFS and Windows Refresh or Remove does not working.
How can I perform format without windows cd?
Thanks

Hi OrMas,
Are you sure to perform a format ? You will lose all the data in the drive after you performed a format.
“suddenly C driver turns to NTFS”
What is the exact issue? Do you mean the original format of the C drive is FAT32 or other formats except the NTFS format ?
Considering you are working with the Windows 8 ,we can try to upgrade to Windows 8.1 to have a check .Here is a link for reference.
Update to Windows 8.1 from Windows 8
http://windows.microsoft.com/en-hk/windows-8/update-from-windows-8-tutorial
If we want to perform a clean install to format the drive ,we can make a install media though we didn`t have a CD.Here is a link for reference:
How to Create a Windows 8 Installation DVD or USB Drive
http://lifehacker.com/how-to-create-a-windows-8-installation-dvd-or-usb-drive-505769939
NOTE: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
Best regards

MBP retina display refresh problems

My MacBook Pro Retina Display laptop is having display refresh issues. hard to explain whats going on, but its basicly lagging. When I open a new window, not everything shows up, sometimes only a button will show up. If the whole window does show up and I try to move it, the frame will be ghosted where every I move it. The only way I found to fix this is to restart the computer.
Its completely updated
I tried turning off the automatic graphics switching

Yes I have a gripe at the trend in Apple design towards a sealed box design. I don't care about batteries bieng selad in or screens being fused to the lid but I do want to choose upgrade RAM later and HD later. I also would like to have a desktop replacement mobile workstation with options of 2GB of KQuadro 1000 or 2000 and of adding up to 32GB of RAM. This is not advanced tech but readily available from two leading windows vendors.
I prefer to stay with Apple as its customer care and quality control is superior. However, I cannot buy such an expensive computer with so little upgrade potential and merely 1GB of VRAM. I agree the Retina display is wonderful but very few of my clients will ever use one to see my content.
HP has come out with a modular design for their Z820 towers and mobile workstations which are well up to Apple standards. Their customer support is not and that's why I'd like to stay with Apple.
I am merely griping about the closed box approach and I am not alone amongst the content creators who kept Apple afloat before it dropped computer from its name. I merely want to choose when I upgrade my RAM and HD and choose the GPU on a top of the line PRO laptop. Is that really asking too much? Why would Apple not want my custom anymore? Why do you think it's just griping? I could reply: do you accept everything you are given?
We should be on the same side. I have bought Apple computers for years and my studio has a fleet of Mac Pros and more.
dosers wrote:
There are no USB 2 or 3 connections problems I know of - or that I have noticed. Dull Screens? Yellow Tinged? First I hear of it. Do you just have a gripe that you can't order 32GB Ram with it (show me a windows system in even close to the same package / dimensions that does) or some other video card?
If there is a refresh problem, it seems to be limited at this point.

Reports 6i windows display problem on Windows NT system

Iam using Reports 6i on Windows NT.All the reports 6i windows are became transporent windows, displying problem (repainting problem). I did fresh installation. But iam not able to solve this.

I am using same fonts on all these plateforms.Look more closely at those fonts. They may have the same names, but the Windows 2000 versions may be larger (able to render more characters).

Smartview 11.1.2.1.102 Refresh problems

I have multiple users experiencing severe refresh problems after upgrading to smartview version 11.1.2.1.102.
Users state Refresh is taking 10-15mins+ when in old version 9x it only takes 1-2mins. In addition users have rebuilt the excel files (copy in new workbook) then all is working fine but when saved/the next day the refresh goes very slow again!
Please can any help?

1. Deleting the Sheet Info fixes the problem for the moment - but the problem soon returns. Do you know what causes the problem, so we can cut the repeating cycle? Is this strictly a multi-user issue? We do have several users that may use the file. Some have version 11.1.2.1.000 (not 103). Oracle's tips doc (http://www.oracle.com/technetwork/middleware/bi-foundation/epm-tips-issues-73-102-1612164.pdf) mentions uncompressed metadata stored in the worksheet.
2. Is there a specific version that allows the Sheet Info fix? Oracle's tip sheet says they need Some have version 11.1.2.1.103, but the users we have seen so far can use this workaround on Some have version 11.1.2.1.000. I'd like to know when at what version this fix starts so I can push other users to update. It would be good to know at which version this issue starts.
Thank you - great information in the thread!
P.S. for reference:
From http://www.oracle.com/technetwork/middleware/bi-foundation/epm-tips-issues-73-102-1612164.pdf
In EPM System Release 11.1.2.1, I am opening .xls files with Smart View functions in Excel 2010, but it’s very slow or seems to freeze Excel. How can I fix this?
This is most likely due to an issue with uncompressed metadata stored in the workbook. In most cases, the issue can be found in the first sheet in hidden shapes. Note that the file will open but it may take a very long time, and in some cases the file will open fine with Smart View disabled. In other cases it will not matter. To solve this problem, save a copy of the file and follow the steps below for the version of Smart View you have.
If you are using Smart View 11.1.2.1.103 or above, follow these steps:
1 Open the file (this may take a while) with Smart View enabled.
2 From the Smart View Ribbon, select Sheet Info.
3 Select Delete Smart View Info.
4 Select Workbook and all Sheet Info.
174 Miscellaneous and Product-Specific Tips
5 Click OK.
6 Save the modified workbook.
7 Reopen the workbook.
If you are not using Smart View 11.1.2.1.103 or above, follow these steps:
1 Open the file (this may take a while).
2 Right-click on the tab of the first worksheet and select Select All Sheets.
3 Right-click on the tab of the first worksheet and select Move or Copy.
4 In the drop-down box, select (new book) and check Create a Copy.
5 Save the workbook.
6 Open the new workbook.
7 Refresh the data.

USB2DVI adaptor window refresh problem

Similar Messages

Maybe you are looking for