USB3.0 Port only works with driver uninstalled?

One of the 3.0 ports of the 4 USB3.0 does not work when the driver is installed. But works without the driver. Why is that?

Using Win 8 or 8.1 OS? It has it's own drivers for USB 3.0.
As a side note, you have provided '0' information as to what platform or system is involved.

Similar Messages

  • Help my MBP 2011's USB ports only work with powered devices

    Hey.
    My USB ports are only working with powered devices ( such as an interactive white board) they are not working wiht a USB modem, it picks up but doenst have the energy to dial out. it also doesnt work with a flash drive.
    this is only recent after i updated non vital programs such as printer things.
    now the other problem is that i have not updated this too recently but i dont mind losing some info.
    ps. i have done all of the restarts such as smc, ram. pram. the only thing i have not done is take out the batt. but thats becuase its really hard to do and there are warnings all over it saying dont remove.
    p.p.s i am running snow10.6.8
    Please help becuase i need it to help teach some of my stundets and not being able to use a USB or the internet to research is impeeding my planning.
    Thanks so much in advance
    Andrew

    One final detail. it is a 2011 early model. if there is any more details that you want please ask. i am very desperate because i dont want to take it to apple unless i have to.

  • 8520 curve usb port only working with live battery

    Hello
    I have 4 8520 curves that when a charger is inserted without a battery,nothing happens. Only when a live battery is inserted does it charge. I have also noted that when a battery is inserted on these 4, the keypad lights flash then the red light comes on. Any ideas as to what is the problem here?

    No matter what, nothing will work unless there is a minimum charge in the battery. If a battery is depleted, you can't do any processes, even if you have a charger attached to the BB. As I recall, 10% is the minimum...but I could be recalling incorrectly. And what the BB screen can display will change as well with the level of charge in the battery...with insufficient charge in the battery, it will not feed any power to the device...hence, no display.
    Further, if a battery fully depletes, then it can actually be damaged, even to the point of being rendered completely useless. Likewise, as batteries age, their ability to hold adequate charge and work with the BB can degrade.
    The advice would be to try what you are attempting, but with already fully charged batteries. If all goes well, then cease using those batteries that do not provide proper functionality.
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I am using Windows 7 64-bit on a partitioned hard drive on a MacAir.  The trackpad will only work with a click.  How do I get the full function of tap and scroll?

    I am using Windows 7, 64-bit on a partitioned hard drive on a  2012 MacAir.  The trackpad only works with clicking.  How do I get the full function of tap and scroll? (I have this on a 2011 Mac Pro with 32 bit Windows 7 and it works properly.)

    Windows Control Panel>Boot Camp Control Panel>Trackpad.

  • Boot Camp won't make a Windows XP driver disc, OS X disc only works with Win7

    First time Mac user. Just got a new Macbook Pro.
    I have successfully installed Windows XP on the Mac using Boot Camp. But I need the driver disc. The right mouse button doesn't even work and Windows is impossible to navigate without that. The disc eject button does not work, one has to eject a disc using laborious menus. Very frustrating.
    When I run Boot Camp it only has the option to make a Windows 7 driver disc. I don't see any way to make a driver disc for Windows XP.
    Everywhere I have searched on the Net the information says to put the OS X Leopard disc in the drive when WinXP is running and it will automatically install drivers. When I try that a window comes up saying it only works with Windows 7.
    This web site shows screen shots of a Beta version of Boot Camp that makes Windows XP drivers discs.
    http://www.askdavetaylor.com/how_do_i_install_windows_xp_on_my_mac_using_boot_ca mp_1.html
    How can I make a Windows XP driver disc?
    I really hope Apple didn't discontinue/eliminate the option to make a Windows XP driver disc altogether, forcing everyone to use Windows 7 only...
    Is there a way to install an older version of Boot Camp over the latest version I'm running? Where would I find it?
    Macbook Pro
    OS X 10.6.7
    Boot Camp 3.0.4
    Thank you for your time in helping me on this.

    The retail OS X 10.6.3 DVDs unlike your OEM DVD does have a complete set of drivers for $29 w/o having to deal with questionable bitorrent.
    Microsoft EOL'd XP and Vista SP1.
    Your Mac has Intel Thunderbolt and you don't see Apple doing backward compatibility. You can't run 10.5 on new Mac. So yes it comes with those limitations, but XP is also 20x more vulnerable, IE9 is more secure and XP has not kept up with the latest hardware, besides which I don't see a place or need for a 32-bit OS, any platform today.

  • I purchased a new vehicle with a USP port but my nano model A199 will not work, only works with the aux plug which will not allow me to view the songs on the vehicle touchscreen. Is there a download I can get to put into this nano?

    I purchased a new vehicle and the older ipod nano I have will not work through the USP  port, only works through the aux plug. Is there a download i can get toput into the nano that will then allow me to use the USP port instead of the aux port?

    Check with your dealer and see if there is a special cable available for connecting your iPod. It should have a dock connector on one end and USB and miniplug on the other.

  • Hd intel 4000 code 43 on windows 8.1 - It only works with an older driver version

    Hi there I have an HP Pavilion Sleekbook 14 PC (HP Pavilion Ultrabook 14), with  a 18FA motherboard - version 82.23,  F.12 Bios, and a Intel(R) HD Graphics 4000.  The graphic card only works with the 9.17.10.2932 (12/12/2012) driver, and everytime I try to update to a newer driver version, it shows the "Code 43" error. Does anyone knows how to update the drive and solve the "Code 43" error? Without solving this issue, I can't install the Windows 10. I've tried to update to Windows 10, but it doesn't run this old graphic display driver and it only gives me a blue screen, and if I install a new driver version, there it comes the "Code 43" error. Thank you, guys.

    Hi  ,
    Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
    I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion14 Sleekbook and issues with the Drivers for Windows 8.1. If your computer is having problems finding and installing operating system updates, try using the Windows Update Troubleshooting tool to fix the problem.
    I would be happy to assist if needed. How Do I Find My Model Number or Product Number?
    Please let me know.
    Thanks.

  • Left USB port only works when entering BIOS

    Hi all -- I have a Toshiba Satellite C855D-S5106, the LEFT USB port only works when I enter the BIOS at boot-time. If I disconnect the drive, i.e. eject it and then remove it, the port stops working. The other two ports at the right work fine. I've tested this with known good flash drives and Kensington USB trackball that work fine on four other computers, and the other two USB ports. I'm thinking its software/BIOS because hardware would fail intermittently, I could not get the port to work if there was a failing connection. As stated, this work-around succeeds EVERY time. I have not upgraded the bios. Has anyone had this problem?

    If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 457-7777.
    - Peter

  • Can't sign in using any 3rd party email client with my iCloud account on any Mac. Tried every settings, My iCloud only works with Mail.app

    Can't sign in using any 3rd party email client with my iCloud account on any Mac or any other Mac. My iCloud will only work with Mail.app. All the clients I tried work perfectly well as long as I sign in with somebody else's iCloud account. But mine won't work no matter the client (Postbox, Unibox, Airmail...) and no matter the computer.
    I can access my account on iCloud.com, but I can't use email clients without getting error messages prompting me to check my password or login.
    I was able to use those clients in the past but a couple of months ago I got logged out of Airmail and the issue started just like that!
    I tried every possible mail server settings including the following:
    IMAP information for the incoming mail server
    Server name: imap.mail.me.com
    SSL Required: Yes
    If you receive errors when using SSL, try using TLS instead.
    Port: 993
    Username: The name part of your iCloud email address (for example, emilyparker, not [email protected])
    Password: Your iCloud password
    SMTP information for the outgoing mail server
    Server name: smtp.mail.me.com
    SSL Required: Yes
    If you receive errors when using SSL, try using TLS instead.
    Port: 587
    SMTP Authentication Required: Yes
    Username: Your full iCloud email address (for example, [email protected], not emilyparker)
    Password: Your iCloud password

    Those are the correct settings, and they work with any email client that supports Imap.
    Try again.

  • I need version 3.6.16 for an at home online job. I am unable to find it anywhere from a secure source. Is there a way to get a link to download it? The ChaCha Toolbar only works with this older version. Thanks!

    I need the older version 3.6.16 for my at home based job for ChaCha. Their toolbar only works with this version and they say it is more compatible with this. And I have not been able to find a secure link to download this older version. Can you give me a secure link or is it possible to download this older version securely?

    If you only need Firefox 3.6 for just one thing then you may be better off using a portable version of Firefox as it will not impact your Firefox 6.0.2 install. You can install it on hard disk or on a usb flash drive. Firefox 3.6.22 is the current security update as 3.6.16 is old.
    http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

  • Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....

    Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....
    -CharlieH23

    Copy and paste only this area, you may have to scroll down.
    Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
    Operating System: Windows 7 64-bit
    Version: 6.1 Service Pack 1
    System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 2
    Logical processor count: 4
    Processor speed: 2494 MHz
    Built-in memory: 6019 MB
    Free memory: 3360 MB
    Memory available to Photoshop: 5227 MB
    Memory used by Photoshop: 60 %
    Image tile size: 128K
    Image cache levels: 4
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    OpenCL Version: 1.2
    OpenGL Version: 2.1
    Video Rect Texture Size: 16384
    OpenGL Memory: 2112 MB
    Video Card Vendor: Intel
    Video Card Renderer: Intel(R) HD Graphics 4000
    Display: 1
    Display Bounds: top=0, left=0, bottom=768, right=1366
    Video Card Number: 1
    Video Card: Intel(R) HD Graphics 4000
    Driver Version: 10.18.10.3958
    Driver Date: 20140930000000.000000-000
    Video Card Driver: igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,igd10iumd32
    Video Mode: 1366 x 768 x 4294967296 colors
    Video Card Caption: Intel(R) HD Graphics 4000
    Video Card Memory: 2112 MB

  • I have a new imac with imovie 11 however my hd everio camcorder will only work with imovie 8 or 9 how do i download imovie 9? all i can find are updates and my mac says i don't need it

    i have a new imac with imovie 11 however my everio hd camcorder will only work with imovie 8 or 9. i tried to download imovie 9 but my mac says i don't need the update. How can i download imovie 8 or 9 complete not the update?

    I really appreciate all your help. Today I spent some time on the problem. First I purchased  any video converter from the ap store and then I connected the camera to the mac with the original usb cable that came with the camera. I turned on the camera and selected backup on pc and the logo came up on my home page. I opened it and after several attempts i found the 3 video files that were on the camera. I then converted them from a tod file to mp4 and then transfered  them to imovie. Now I have to figure out how to send the video to youtube or move it to an external hard drive which I have not been able to do. So far I am not too fond of imovie 11. If you could send me  the download for imovie 6 I then could try that route. When talking to apple support yesterday about the problem they suggested to get Final Cut Express. It's 200 bucks so before i order the install disc i would like to try your suggestion. My email address is [email protected] Again I thank you very much for your help! George

  • Does ws adapter only work with asynchronous web service?

    Hi all,
    can you please confirm whether or not ws adapter (PI 7.1) only works with asynchronous web service?
    I have created an async. outbound service interface in PI 7.1, generated the client proxy in ECC, created an web service based on the proxy, wrote a test program to call the web service (PI scenario uses ws adapter in the sender CC). Everything works fine.
    Then I did the same thing with sync. outbound service interface. I got exception while calling the web service in ECC.
    I've heard that ws adapter is designed for async. communication. Does it mean that it won't work with sync. web service?
    I haven't seen any official SAP document saying taht ws adapter only works for async. web service. If you have any, can you please share it?
    Thanks
    Jayson

    Thank you all for your information.
    The error I got when calling the proxy with logical port (web service) is:
    SOAP:1,007 SRT: Unsupported xstream found: ("HTTP Code 404  : Not Found") 
    I will debug it to see what exactly happens. And will keep you guys updated.
    Just debugged, the error is because the http header's content type is text/html while it should be test/xml. However this type is set by the ws runtime, not by the application. Anybody has an idea about this?
    Jayson
    Edited by: Jayson on Feb 18, 2009 10:04 AM
    Edited by: Jayson on Feb 18, 2009 12:11 PM

  • MBPro 17 Intel Core 2 Duo Audio only works with the headphones?

    MBPro 17 Intel Core 2 Duo Audio only works with the headphones?
    There is a red light constantly emitting from the headphone socket?
    I can not listen to sound unless headphones are plugged in - when taken out I get a red light and the volume controls kets seem locked?
    Please help!
    Julian

    Hi Kitty.
    Seems to be quite a popular problem. In another post, I posted the following.
    "The red light is the data signal that is transmitted if you plug in an Optical Audio device such as surround sound speakers. I had the same problem for a short while with my 17' MBP. Sound was working fine from my built in speakers but I plugged in some earphones to listen to something that I did not want the rest of the office to hear and after pulling the hearphones out, the optical signal (red light) was being transmitted. The switch Cessna is referring to is the switch that is triggered inside the port that tells OSX that earphones/optical audio device is plugged in and to shut down power to the built in speakers. When the device is un-plugged from that port, the switch should get triggered again and power up the built in speakers and disable the optical light signal. Perhaps there is the slightest defect on the earphones you are plugging in that are preventing it from triggering the switch when the earphones are un-plugged.
    Try a different sent of earphones to maybe trigger the switch if you are uncomfortable with the paper clip solution."
    That seemed to solve the problem for that user.
    The link to the post is http://discussions.apple.com/thread.jspa?threadID=895286&tstart=30
    Good luck

  • Does DualCoreCenter ONLY work with the MSI VGA Drivers?

    I have the RX3870-T2D512E-OC Video Card using the latest Catalyst 8.5 drivers but DualCoreCenter does not see the video card at all.   If this product only works with MSI drivers than it's total and utter crap for Video since the drivers are so far out of date for ATI that it is not funny by MSI.  It detects the new K9A2 CF-F V2 mainboard just fine but not my video card.

    So use the ATI drivers, then you have all the options except the MSI extra's.
    MSI can't release drivers without testing, so it takes a bit of time.
    BTW, GPU Scaling was already in Catalist 8.30, MSI has 8.45 online, ATI is at 8.50
    I wouldn't consider that far behind.
    BTW, why do you consider a bit older driver useless? Any reason why you must have the latest driver?
    Only a few games require to have the latest drivers at all.
    I myself never use the latest ATI drivers, I prefer the better tested MSI version, even when it's a few months behind.
    And I have never seen a game that had problems with it.

Maybe you are looking for