USB3 Display

Hallo
it is possible from MAC MINI with thunderbolt , displayport to connect with a Display (only USB3 port)
thanks

I only know of the Displaylink system which is compatible with Mac mini, it connects to a display that has Display link hardware embedded in the display.

Similar Messages

  • ThinkPad Twist with USB3 dock display problem

    I have a ThinkPad Twist running Windows 8 driving a single external display through a Lenovo USB3 dock. When I extend my screen across both displays or if I close the laptop and just use the external display, then the display periodically goes black and then recovers. If I duplicate the laptop screen onto the external monitor all is good.
    Sometimes this is caused by UAC and other password requests. In that case the screen stays black until I respond to the pop-up on the laptop screen. I understand that this is a security feature. Other times it seems to happen spontaneously. Several times I have sat and watched the external display go black for a few seconds then recover several times a minute without any user activity. I don't think that's related to a security feature.
    I also have a Lenovo X1 Carbon running Windows 8. When using it with the same USB3 dock I have never experienced this issue.

    I was in the same scenario, my company bought a Twist for testing but we want Windows 7 because we can't train everyone on using Windows 8.
    I finally found a project on SourceForge that seems to be working great.
    http://yeokhengmeng.com/2013/01/auto-rotate-screen
    I had to install the ThinkVantage Active Protection System before the program would function.
    http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014892
    It's a simple install, you calibrate the different rotations of the laptop, read the README it will tell you how to get going, it takes 5 minutes.
    I added it as a startup item for all users but I had to follow these instructions to get rid of a security prompt.
    http://www.technipages.com/disable-publisher-could-not-be-verified-messages.html
    I've been testing it and it's almost better than using the built-in button because it's automatic.

  • T520 USB3.0 & 95% Gamut FHD Display?

    http://shop.lenovo.com/us/products/professional-grade/thinkpad/t-series/t520/index.html
    I've been eyeing the T520 for a while now since it looks like a great machine as usual....but I am a little bit disappointed to not see any USB3.0 ports on it at all, especially when the new EliteBook 8560p has a pair of them.  Are they going to be included on the future ThinkPad docks at all or am I simply out of luck with USB3.0 on the T-series?
    I also don't see a 95% Gamut FHD screen option on the T520 as I did before on the T510.  How is the display quality of the standard 1080p anti-glare screen that is currently available?  I ask this because I want a decent quality screen and I know that in the past ThinkPads have not been the best in this category.
    http://shop.lenovo.com/us/products/professional-grade/thinkpad/w-series/W520/index.html
    I see that the W520 actually has both of these features that I'm looking for; however, I really don't need the extra weight or discrete graphics and the price hike that comes along with these.  The decent integrated graphics on Sandy Bridge should be enough for my purposes, I'd just like that USB3.0 and a nicer display if possible.  Will battery life be similar between the W520 and the T520 now with switching graphics?

    Well, the tech I "chatted" with typed something along the lines of how the T520 was really no different from the T510 except obviously for the bump in the CPU generation. Sounds like they didn't want to rock the boat too much. Or maybe they were just being lazy. They did at least put in the mSATA capability in the full-size mini-PCI slot. And the updated discrete video can now drive three monitors in the "plus" dock along with the laptop's own screen. So it's not like they did nothing in this rev., but it does seem like USB 3.0 should have been there if not ExpressCard 2.
    But not having anything more than a single eSATA port for high-speed external storage is making me tilt toward the Latitude E6520. Limited to two displays, but I haven't felt the need for more.

  • Mid-2012 MBP with 27" Cinema Display SCREEN GOES BLACK WHEN USING USB PERIPHERALS IN DOCK

    I haven't been able to find any straightforward answer as to why this is happening and it's becoming one of the most infuriating things in my life, impeding my workflow and costing me unmeasurable time in waiting, rebooting, screwing with cables, etc.
    I use my MBP as a DAW for multitracking live audio events to ProTools through a digital console where I work. Here's my gear list that I use every day:
    Mid-2012 MBP - Yosemite, 8GB, i7 quad 2.5, mechanical hd
    HengeDocks dock for my exact model machine - has set-screw jacks for CinemaDisplay power, Tbolt, FW800, USB, USB, SDcard, headphones, etc
    USB wired keyboard
    Anker 1x4 USB3.0 hub - I have a TimeMachine 1TB drive, 3TB project backup drive, audio interface and MIDI I/O or PT iLok, depending what I'm working on
    Magic Mouse (BlueTooth)
    Here's what's happening:
    SCENARIO 1 - I insert the CinemaDisplay (cD) power connector and TBolt plugs into the dock, tighten the set screws, close the lid of my MBP (already logged into Yosemite & linked with MagicMouse [mM]) and stick the MBP into the dock... everything comes up on the cD and I can go about my day. At this point, I can plug the USB hub into the back of the cD and the system sees the hub & all peripherals listed just fine.
    SCENARIO 2 - Install cD powercon, TBolt connector, USB3 hub, USB keyboard into the dock, close the lid on MBP (again, logged in), insert into dock... cD comes up, looks great for about 15 seconds then goes completely blank. No response from key presses, mouse clicks, threats with a hammer, etc. Then, of course, I have to yank the MBP out of the dock, which hard-disconnects the external drives (backup and TimeMachine... good for them, right?) and causes the MBP to flake, thinking it's still in the dock, then not, then logging me out & requiring a password (not a big deal- I deal with copyrighted stuff, so passwords aren't the issue).
    ***EVEN IF I DO NOT PLUG THE USB3 HUB INTO THE HENGE DOCK, THE cD STILL GOES BLANK AFTER 15 SEC... IT ONLY SEEMS TO LIKE THE TBOLT AND POWER... NO OTHER PERIPHERALS (fw800, USB, etc)***
    It seems like the MBP freaks out when the lid is closed and there are USB/FW peripherals plugged in while using a secondary TBolt display as the main output... seems stupid... if I need a closed-lid dock, the MBP shouldn't care what I have plugged in while the lid is closed. I had the same issues with Mountain Lion & Mavericks and now it's being repeated with Yosemite.
    My goal in this exercise is simply to free up the USB jacks on the back of the cD for two reasons - #1) from time to time, I have extra things to plug in and I don't want some massive USB 1x8 hub on my desk... looks stupid; #2) the bottleneck created by plugging in the hub to the back of the cD (another hub via TBolt) almost triples the time required to back up/copy files. I move files from system drive to backup drive & back VERY often due to the nature of my job... speeding up this process would greatly improve my efficiency in the matter. Why would Henge create a dock with all the jacks on it to allow someone to plug into a cD that won't frickin work with said cD? Every other dock I've found makes the user stick the MBP on a slanted, goofy-looking stand and have the lid open or something dumb like that... what I have is the setup I need... just need the USB stuff to work while lid is closed and everything from powercon & cD to USB3 hubs will work without making the cD freak out.
    Any ideas out there?

    Have now taken the 27" display into the repair shop and after 24 hrs got the phone call - "appears to be nothing wrong with it, will check again on Tuesday and let you know".
    I can't seem to find anything on the net describing a similar problem. Everything is working fine right now with the Mac Pro connected to the older 20 inch Cinema Display. In fact, everything seems to be working about a second faster.
    I was told by the local retailer that Apple no longer makes the 27 inch LED Cinema Display product and the new display, the "Thunderbolt" will not work with my 13 month old Mac Pro.
    ***??? In 20 years of owning Mac equipment, this is my first major "uh-oh".

  • Display error after boot

    I'm having an issue where the display fails after boot, and displays only a fixed noise pattern. The screen looks completely normal through POST, GRUB, and when initially loading the kernel, when the display is still in a text mode. After that, the screen goes black for a brief second, after which it returns displaying the mentioned noise pattern. The system appears unresponsive after this, and the only option is to shut down the system with the power button.
    Adding nomodeset or vga=794 to the kernel options resolves the issue. That is a temporary fix IMHO; I'd prefer something sturdier, which is my reason for posting. The issue appeared after a pacman -Syu about a week ago, I just haven't had time to look at it until now.
    I've added i915 to MODULES in mkinitcpio.conf and rebuilt as described here in an attempt to fix it, but it did not seem to have any effect.
    I believe this may be a KMS or a driver issue, but I do not know how to confirm or troubleshoot it. I would be grateful if anyone could shed some light on the issue, or point me in the right direction to find out what's causing the issue. Please let me know if any more logs should be attached. I'll try to attach a picture of the screen as well as a dmesg output from the failed startup later.
    lshw:
    toasty
    description: Notebook
    product: 64665WG
    vendor: LENOVO
    version: ThinkPad T61
    serial: L3D7847
    width: 64 bits
    capabilities: smbios-2.4 dmi-2.4 ldt16 vsyscall32
    configuration: administrator_password=disabled boot=normal chassis=notebook family=ThinkPad T61 frontpanel_password=unknown keyboard_password=disabled power-on_password=disabled uuid=DDF8B081-4A90-11CB-8172-A970EC5BB61F
    *-core
    description: Motherboard
    product: 64665WG
    vendor: LENOVO
    physical id: 0
    version: Not Available
    serial: VF1GA83J1A4
    *-firmware
    description: BIOS
    vendor: LENOVO
    physical id: 0
    version: 7LETB2WW (2.12 )
    date: 02/20/2008
    size: 128KiB
    capacity: 4032KiB
    capabilities: pci pcmcia pnp upgrade shadowing escd cdboot bootselect socketedrom edd acpi usb biosbootspecification
    *-cpu
    description: CPU
    product: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz
    vendor: Intel Corp.
    physical id: 6
    bus info: cpu@0
    version: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz
    slot: None
    size: 1600MHz
    capacity: 2001MHz
    width: 64 bits
    clock: 200MHz
    capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida dtherm tpr_shadow vnmi flexpriority cpufreq
    *-cache:0
    description: L1 cache
    physical id: a
    slot: Internal L1 Cache
    size: 64KiB
    capacity: 64KiB
    capabilities: synchronous internal write-back instruction
    *-cache:1
    description: L2 cache
    physical id: c
    slot: Internal L2 Cache
    size: 2MiB
    capacity: 2MiB
    capabilities: burst internal write-back unified
    *-cache
    description: L1 cache
    physical id: b
    slot: Internal L1 Cache
    size: 64KiB
    capacity: 64KiB
    capabilities: synchronous internal write-back data
    *-memory
    description: System Memory
    physical id: 2b
    slot: System board or motherboard
    size: 3GiB
    *-bank:0
    description: SODIMM DDR2 Synchronous 667 MHz (1,5 ns)
    physical id: 0
    slot: DIMM 1
    size: 1GiB
    width: 64 bits
    clock: 667MHz (1.5ns)
    *-bank:1
    description: SODIMM DDR2 Synchronous 667 MHz (1,5 ns)
    physical id: 1
    slot: DIMM 2
    size: 2GiB
    width: 64 bits
    clock: 667MHz (1.5ns)
    *-pci
    description: Host bridge
    product: Mobile PM965/GM965/GL960 Memory Controller Hub
    vendor: Intel Corporation
    physical id: 100
    bus info: pci@0000:00:00.0
    version: 0c
    width: 32 bits
    clock: 33MHz
    *-display:0
    description: VGA compatible controller
    product: Mobile GM965/GL960 Integrated Graphics Controller (primary)
    vendor: Intel Corporation
    physical id: 2
    bus info: pci@0000:00:02.0
    version: 0c
    width: 64 bits
    clock: 33MHz
    capabilities: msi pm vga_controller bus_master cap_list rom
    configuration: driver=i915 latency=0
    resources: irq:45 memory:f8100000-f81fffff memory:e0000000-efffffff ioport:1800(size=8)
    *-display:1 UNCLAIMED
    description: Display controller
    product: Mobile GM965/GL960 Integrated Graphics Controller (secondary)
    vendor: Intel Corporation
    physical id: 2.1
    bus info: pci@0000:00:02.1
    version: 0c
    width: 64 bits
    clock: 33MHz
    capabilities: pm bus_master cap_list
    configuration: latency=0
    resources: memory:f8200000-f82fffff
    *-network
    description: Ethernet interface
    product: 82566MM Gigabit Network Connection
    vendor: Intel Corporation
    physical id: 19
    bus info: pci@0000:00:19.0
    logical name: eth0
    version: 03
    serial: 00:1c:25:7c:64:7b
    capacity: 1Gbit/s
    width: 32 bits
    clock: 33MHz
    capabilities: pm msi cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
    configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.3.2-k firmware=0.3-0 latency=0 link=no multicast=yes port=twisted pair
    resources: irq:49 memory:fe000000-fe01ffff memory:fe025000-fe025fff ioport:1840(size=32)
    *-usb:0
    description: USB controller
    product: 82801H (ICH8 Family) USB UHCI Controller #4
    vendor: Intel Corporation
    physical id: 1a
    bus info: pci@0000:00:1a.0
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: uhci bus_master
    configuration: driver=uhci_hcd latency=0
    resources: irq:20 ioport:1860(size=32)
    *-usbhost
    product: UHCI Host Controller
    vendor: Linux 3.15.1-1-ARCH uhci_hcd
    physical id: 1
    bus info: usb@1
    logical name: usb1
    version: 3.15
    capabilities: usb-1.10
    configuration: driver=hub slots=2 speed=12Mbit/s
    *-usb:0
    description: Bluetooth wireless interface
    product: BCM2045B
    vendor: Broadcom Corp
    physical id: 1
    bus info: usb@1:1
    version: 1.00
    capabilities: bluetooth usb-2.00
    configuration: driver=btusb speed=12Mbit/s
    *-usb:1 UNCLAIMED
    description: Generic USB device
    product: Biometric Coprocessor
    vendor: STMicroelectronics
    physical id: 2
    bus info: usb@1:2
    version: 0.01
    capabilities: usb-1.00
    configuration: maxpower=100mA speed=12Mbit/s
    *-usb:1
    description: USB controller
    product: 82801H (ICH8 Family) USB UHCI Controller #5
    vendor: Intel Corporation
    physical id: 1a.1
    bus info: pci@0000:00:1a.1
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: uhci
    configuration: driver=uhci_hcd latency=0
    resources: irq:21 ioport:1880(size=32)
    *-usbhost
    product: UHCI Host Controller
    vendor: Linux 3.15.1-1-ARCH uhci_hcd
    physical id: 1
    bus info: usb@2
    logical name: usb2
    version: 3.15
    capabilities: usb-1.10
    configuration: driver=hub slots=2 speed=12Mbit/s
    *-usb:2
    description: USB controller
    product: 82801H (ICH8 Family) USB2 EHCI Controller #2
    vendor: Intel Corporation
    physical id: 1a.7
    bus info: pci@0000:00:1a.7
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: pm ehci bus_master cap_list
    configuration: driver=ehci-pci latency=0
    resources: irq:22 memory:fe226c00-fe226fff
    *-usbhost
    product: EHCI Host Controller
    vendor: Linux 3.15.1-1-ARCH ehci_hcd
    physical id: 1
    bus info: usb@6
    logical name: usb6
    version: 3.15
    capabilities: usb-2.00
    configuration: driver=hub slots=4 speed=480Mbit/s
    *-multimedia
    description: Audio device
    product: 82801H (ICH8 Family) HD Audio Controller
    vendor: Intel Corporation
    physical id: 1b
    bus info: pci@0000:00:1b.0
    version: 03
    width: 64 bits
    clock: 33MHz
    capabilities: pm msi pciexpress bus_master cap_list
    configuration: driver=snd_hda_intel latency=0
    resources: irq:47 memory:fe020000-fe023fff
    *-pci:0
    description: PCI bridge
    product: 82801H (ICH8 Family) PCI Express Port 1
    vendor: Intel Corporation
    physical id: 1c
    bus info: pci@0000:00:1c.0
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
    configuration: driver=pcieport
    resources: irq:40 ioport:2000(size=4096) memory:fc000000-fdffffff ioport:f8000000(size=1048576)
    *-pci:1
    description: PCI bridge
    product: 82801H (ICH8 Family) PCI Express Port 2
    vendor: Intel Corporation
    physical id: 1c.1
    bus info: pci@0000:00:1c.1
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
    configuration: driver=pcieport
    resources: irq:41 ioport:3000(size=4096) memory:dc000000-df3fffff ioport:dfe00000(size=1048576)
    *-network
    description: Wireless interface
    product: PRO/Wireless 3945ABG [Golan] Network Connection
    vendor: Intel Corporation
    physical id: 0
    bus info: pci@0000:03:00.0
    logical name: wlan0
    version: 02
    serial: 00:1f:3c:28:8e:0d
    width: 32 bits
    clock: 33MHz
    capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
    configuration: broadcast=yes driver=iwl3945 driverversion=3.15.1-1-ARCH firmware=15.32.2.9 ip=192.168.1.12 latency=0 link=yes multicast=yes wireless=IEEE 802.11abg
    resources: irq:48 memory:df3ff000-df3fffff
    *-pci:2
    description: PCI bridge
    product: 82801H (ICH8 Family) PCI Express Port 3
    vendor: Intel Corporation
    physical id: 1c.2
    bus info: pci@0000:00:1c.2
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
    configuration: driver=pcieport
    resources: irq:42 ioport:4000(size=4096) memory:d8000000-d9ffffff ioport:dfb00000(size=1048576)
    *-pci:3
    description: PCI bridge
    product: 82801H (ICH8 Family) PCI Express Port 4
    vendor: Intel Corporation
    physical id: 1c.3
    bus info: pci@0000:00:1c.3
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
    configuration: driver=pcieport
    resources: irq:43 ioport:5000(size=4096) memory:d4000000-d5ffffff ioport:df800000(size=1048576)
    *-pci:4
    description: PCI bridge
    product: 82801H (ICH8 Family) PCI Express Port 5
    vendor: Intel Corporation
    physical id: 1c.4
    bus info: pci@0000:00:1c.4
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
    configuration: driver=pcieport
    resources: irq:44 ioport:6000(size=4096) memory:d0000000-d1ffffff ioport:df500000(size=1048576)
    *-usb:3
    description: USB controller
    product: 82801H (ICH8 Family) USB UHCI Controller #1
    vendor: Intel Corporation
    physical id: 1d
    bus info: pci@0000:00:1d.0
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: uhci
    configuration: driver=uhci_hcd latency=0
    resources: irq:16 ioport:18a0(size=32)
    *-usbhost
    product: UHCI Host Controller
    vendor: Linux 3.15.1-1-ARCH uhci_hcd
    physical id: 1
    bus info: usb@3
    logical name: usb3
    version: 3.15
    capabilities: usb-1.10
    configuration: driver=hub slots=2 speed=12Mbit/s
    *-usb:4
    description: USB controller
    product: 82801H (ICH8 Family) USB UHCI Controller #2
    vendor: Intel Corporation
    physical id: 1d.1
    bus info: pci@0000:00:1d.1
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: uhci
    configuration: driver=uhci_hcd latency=0
    resources: irq:17 ioport:18c0(size=32)
    *-usbhost
    product: UHCI Host Controller
    vendor: Linux 3.15.1-1-ARCH uhci_hcd
    physical id: 1
    bus info: usb@4
    logical name: usb4
    version: 3.15
    capabilities: usb-1.10
    configuration: driver=hub slots=2 speed=12Mbit/s
    *-usb:5
    description: USB controller
    product: 82801H (ICH8 Family) USB UHCI Controller #3
    vendor: Intel Corporation
    physical id: 1d.2
    bus info: pci@0000:00:1d.2
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: uhci
    configuration: driver=uhci_hcd latency=0
    resources: irq:18 ioport:18e0(size=32)
    *-usbhost
    product: UHCI Host Controller
    vendor: Linux 3.15.1-1-ARCH uhci_hcd
    physical id: 1
    bus info: usb@5
    logical name: usb5
    version: 3.15
    capabilities: usb-1.10
    configuration: driver=hub slots=2 speed=12Mbit/s
    *-usb:6
    description: USB controller
    product: 82801H (ICH8 Family) USB2 EHCI Controller #1
    vendor: Intel Corporation
    physical id: 1d.7
    bus info: pci@0000:00:1d.7
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: pm debug ehci bus_master cap_list
    configuration: driver=ehci-pci latency=0
    resources: irq:19 memory:fe227000-fe2273ff
    *-usbhost
    product: EHCI Host Controller
    vendor: Linux 3.15.1-1-ARCH ehci_hcd
    physical id: 1
    bus info: usb@7
    logical name: usb7
    version: 3.15
    capabilities: usb-2.00
    configuration: driver=hub slots=6 speed=480Mbit/s
    *-pci:5
    description: PCI bridge
    product: 82801 Mobile PCI Bridge
    vendor: Intel Corporation
    physical id: 1e
    bus info: pci@0000:00:1e.0
    version: f3
    width: 32 bits
    clock: 33MHz
    capabilities: pci subtractive_decode bus_master cap_list
    resources: ioport:7000(size=16384) memory:f8300000-fbffffff ioport:f4000000(size=67108864)
    *-pcmcia
    description: CardBus bridge
    product: RL5c476 II
    vendor: Ricoh Co Ltd
    physical id: 0
    bus info: pci@0000:15:00.0
    version: ba
    width: 64 bits
    clock: 33MHz
    capabilities: pcmcia bus_master cap_list
    configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=128
    resources: iomemory:b01716150-b0171614f irq:16 memory:f8300000-f8300fff ioport:7000(size=256) ioport:7400(size=256) memory:f4000000-f7ffffff memory:c0000000-c3ffffff
    *-firewire
    description: FireWire (IEEE 1394)
    product: R5C832 IEEE 1394 Controller
    vendor: Ricoh Co Ltd
    physical id: 0.1
    bus info: pci@0000:15:00.1
    version: 04
    width: 32 bits
    clock: 33MHz
    capabilities: pm ohci bus_master cap_list
    configuration: driver=firewire_ohci latency=64 maxlatency=4 mingnt=2
    resources: irq:17 memory:f8301000-f83017ff
    *-generic:0
    description: SD Host controller
    product: R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter
    vendor: Ricoh Co Ltd
    physical id: 0.2
    bus info: pci@0000:15:00.2
    version: 21
    width: 32 bits
    clock: 33MHz
    capabilities: pm bus_master cap_list
    configuration: driver=sdhci-pci latency=64
    resources: irq:18 memory:f8301800-f83018ff
    *-generic:1
    description: System peripheral
    product: R5C592 Memory Stick Bus Host Adapter
    vendor: Ricoh Co Ltd
    physical id: 0.4
    bus info: pci@0000:15:00.4
    version: 11
    width: 32 bits
    clock: 33MHz
    capabilities: pm bus_master cap_list
    configuration: driver=r592 latency=64
    resources: irq:18 memory:f8302000-f83020ff
    *-generic:2
    description: System peripheral
    product: xD-Picture Card Controller
    vendor: Ricoh Co Ltd
    physical id: 0.5
    bus info: pci@0000:15:00.5
    version: 11
    width: 32 bits
    clock: 33MHz
    capabilities: pm bus_master cap_list
    configuration: driver=r852 latency=64
    resources: irq:18 memory:f8302400-f83024ff
    *-isa
    description: ISA bridge
    product: 82801HEM (ICH8M-E) LPC Interface Controller
    vendor: Intel Corporation
    physical id: 1f
    bus info: pci@0000:00:1f.0
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: isa bus_master cap_list
    configuration: driver=lpc_ich latency=0
    resources: irq:0
    *-ide
    description: IDE interface
    product: 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller
    vendor: Intel Corporation
    physical id: 1f.1
    bus info: pci@0000:00:1f.1
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: ide bus_master
    configuration: driver=ata_piix latency=0
    resources: irq:16 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:1c00(size=16)
    *-storage
    description: SATA controller
    product: 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode]
    vendor: Intel Corporation
    physical id: 1f.2
    bus info: pci@0000:00:1f.2
    version: 03
    width: 32 bits
    clock: 66MHz
    capabilities: storage msi pm ahci_1.0 bus_master cap_list
    configuration: driver=ahci latency=0
    resources: irq:46 ioport:1c50(size=8) ioport:1c44(size=4) ioport:1c48(size=8) ioport:1c40(size=4) ioport:1c20(size=32) memory:fe226000-fe2267ff
    *-serial
    description: SMBus
    product: 82801H (ICH8 Family) SMBus Controller
    vendor: Intel Corporation
    physical id: 1f.3
    bus info: pci@0000:00:1f.3
    version: 03
    width: 32 bits
    clock: 33MHz
    configuration: driver=i801_smbus latency=0
    resources: irq:23 memory:fe227400-fe2274ff ioport:1c60(size=32)
    *-battery
    product: 92P1131
    vendor: SANYO
    physical id: 1
    slot: Rear
    capacity: 71280mWh
    configuration: voltage=10,8V
    UPDATE:
    The pattern appears for a few seconds before the screen goes completely black.
    dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.7.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Jan 28 10:03:32 CET 2013
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=6ba82705-70eb-4c55-baeb-0ae928385e41 ro quiet 3 processor.max_cstate=3
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000be6affff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000be6b0000-0x00000000be6cbfff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000be6cc000-0x00000000be6fffff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000be700000-0x00000000beffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.4 present.
    [ 0.000000] DMI: LENOVO 64665WG/64665WG, BIOS 7LETB2WW (2.12 ) 02/20/2008
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0xbe6b0 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-DFFFF uncachable
    [ 0.000000] E0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0BF000000 mask FFF000000 uncachable
    [ 0.000000] 1 base 000000000 mask F80000000 write-back
    [ 0.000000] 2 base 080000000 mask FC0000000 write-back
    [ 0.000000] 3 base 0BE700000 mask FFFF00000 uncachable
    [ 0.000000] 4 base 0BE800000 mask FFF800000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [mem 0x000f6900-0x000f690f] mapped at [ffff8800000f6900]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0xbe6affff]
    [ 0.000000] [mem 0x00000000-0xbe5fffff] page 2M
    [ 0.000000] [mem 0xbe600000-0xbe6affff] page 4k
    [ 0.000000] kernel direct mapping tables up to 0xbe6affff @ [mem 0x1fffb000-0x1fffffff]
    [ 0.000000] RAMDISK: [mem 0x37a10000-0x37cfffff]
    [ 0.000000] ACPI: RSDP 00000000000f68d0 00024 (v02 LENOVO)
    [ 0.000000] ACPI: XSDT 00000000be6bb74d 00094 (v01 LENOVO TP-7L 00002120 LTP 00000000)
    [ 0.000000] ACPI: FACP 00000000be6bb800 000F4 (v03 LENOVO TP-7L 00002120 LNVO 00000001)
    [ 0.000000] ACPI BIOS Bug: Warning: 32/64X length mismatch in FADT/Gpe1Block: 0/32 (20120913/tbfadt-567)
    [ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20120913/tbfadt-598)
    [ 0.000000] ACPI: DSDT 00000000be6bbc1d 0FF03 (v01 LENOVO TP-7L 00002120 MSFT 03000000)
    [ 0.000000] ACPI: FACS 00000000be6e4000 00040
    [ 0.000000] ACPI: SSDT 00000000be6bb9b4 00269 (v01 LENOVO TP-7L 00002120 MSFT 03000000)
    [ 0.000000] ACPI: ECDT 00000000be6cbb20 00052 (v01 LENOVO TP-7L 00002120 LNVO 00000001)
    [ 0.000000] ACPI: TCPA 00000000be6cbb72 00032 (v02 LENOVO TP-7L 00002120 LNVO 00000001)
    [ 0.000000] ACPI: APIC 00000000be6cbba4 00068 (v01 LENOVO TP-7L 00002120 LNVO 00000001)
    [ 0.000000] ACPI: MCFG 00000000be6cbc0c 0003C (v01 LENOVO TP-7L 00002120 LNVO 00000001)
    [ 0.000000] ACPI: HPET 00000000be6cbc48 00038 (v01 LENOVO TP-7L 00002120 LNVO 00000001)
    [ 0.000000] ACPI: SLIC 00000000be6cbdf0 00176 (v01 LENOVO TP-7L 00002120 LTP 00000000)
    [ 0.000000] ACPI: BOOT 00000000be6cbf66 00028 (v01 LENOVO TP-7L 00002120 LTP 00000001)
    [ 0.000000] ACPI: ASF! 00000000be6cbf8e 00072 (v16 LENOVO TP-7L 00002120 PTL 00000001)
    [ 0.000000] ACPI: SSDT 00000000be6e234d 0025F (v01 LENOVO TP-7L 00002120 INTL 20050513)
    [ 0.000000] ACPI: SSDT 00000000be6e25ac 000A6 (v01 LENOVO TP-7L 00002120 INTL 20050513)
    [ 0.000000] ACPI: SSDT 00000000be6e2652 004F7 (v01 LENOVO TP-7L 00002120 INTL 20050513)
    [ 0.000000] ACPI: SSDT 00000000be6e2b49 001D8 (v01 LENOVO TP-7L 00002120 INTL 20050513)
    [ 0.000000] ACPI: DMI detected: Lenovo ThinkPad T61
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000be6affff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0xbe6affff]
    [ 0.000000] NODE_DATA [mem 0xbe6ac000-0xbe6affff]
    [ 0.000000] [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bae00000-ffff8800bddfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal empty
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0xbe6affff]
    [ 0.000000] On node 0 totalpages: 779837
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 6 pages reserved
    [ 0.000000] DMA zone: 3911 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12123 pages used for memmap
    [ 0.000000] DMA32 zone: 763733 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
    [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
    [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] e820: [mem 0xbf000000-0xefffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800be400000 s84608 r8192 d21888 u1048576
    [ 0.000000] pcpu-alloc: s84608 r8192 d21888 u1048576 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 767644
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=6ba82705-70eb-4c55-baeb-0ae928385e41 ro quiet 3 processor.max_cstate=3
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3055496k/3119808k available (4883k kernel code, 460k absent, 63852k reserved, 4030k data, 812k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
    [ 0.000000] NR_IRQS:4352 nr_irqs:512 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 12582912 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 1994.883 MHz processor
    [ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.00 BogoMIPS (lpj=6649610)
    [ 0.003345] pid_max: default: 32768 minimum: 301
    [ 0.003411] Security Framework initialized
    [ 0.003429] AppArmor: AppArmor disabled by boot time parameter
    [ 0.004096] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.009707] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.011314] Mount-cache hash table entries: 256
    [ 0.011743] Initializing cgroup subsys cpuacct
    [ 0.011749] Initializing cgroup subsys memory
    [ 0.011767] Initializing cgroup subsys devices
    [ 0.011769] Initializing cgroup subsys freezer
    [ 0.011772] Initializing cgroup subsys net_cls
    [ 0.011775] Initializing cgroup subsys blkio
    [ 0.011826] CPU: Physical Processor ID: 0
    [ 0.011829] CPU: Processor Core ID: 0
    [ 0.011833] mce: CPU supports 6 MCE banks
    [ 0.011846] CPU0: Thermal monitoring enabled (TM2)
    [ 0.011853] process: using mwait in idle threads
    [ 0.011861] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
    Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
    tlb_flushall_shift: -1
    [ 0.012032] Freeing SMP alternatives: 16k freed
    [ 0.014357] ACPI: Core revision 20120913
    [ 0.030022] ftrace: allocating 18793 entries in 74 pages
    [ 0.043969] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.078117] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz (fam: 06, model: 0f, stepping: 0d)
    [ 0.079999] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
    [ 0.079999] perf_event_intel: PEBS disabled due to CPU errata
    [ 0.079999] ... version: 2
    [ 0.079999] ... bit width: 40
    [ 0.079999] ... generic registers: 2
    [ 0.079999] ... value mask: 000000ffffffffff
    [ 0.079999] ... max period: 000000007fffffff
    [ 0.079999] ... fixed-purpose events: 3
    [ 0.079999] ... event mask: 0000000700000003
    [ 0.103422] smpboot: Booting Node 0, Processors #1 OK
    [ 0.116550] TSC synchronization [CPU#0 -> CPU#1]:
    [ 0.116555] Measured 1027940 cycles TSC warp between CPUs, turning off TSC clock.
    [ 0.116559] tsc: Marking TSC unstable due to check_tsc_sync_source failed
    [ 0.116688] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.116707] Brought up 2 CPUs
    [ 0.116712] smpboot: Total of 2 processors activated (7982.01 BogoMIPS)
    [ 0.118692] devtmpfs: initialized
    [ 0.121214] PM: Registering ACPI NVS region [mem 0xbe6cc000-0xbe6fffff] (212992 bytes)
    [ 0.121884] RTC time: 16:07:33, date: 02/11/13
    [ 0.121966] NET: Registered protocol family 16
    [ 0.121966] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.121966] ACPI: bus type pci registered
    [ 0.121966] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [ 0.121966] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
    [ 0.130348] PCI: Using configuration type 1 for base access
    [ 0.130570] mtrr: your CPUs had inconsistent variable MTRR settings
    [ 0.130572] mtrr: probably your BIOS does not setup all CPUs.
    [ 0.130575] mtrr: corrected configuration.
    [ 0.133373] bio: create slab <bio-0> at 0
    [ 0.133410] ACPI: Added _OSI(Module Device)
    [ 0.133410] ACPI: Added _OSI(Processor Device)
    [ 0.133410] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.133410] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.133410] ACPI: Added _OSI(Linux)
    [ 0.135453] ACPI: EC: EC description table is found, configuring boot EC
    [ 0.145385] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via DMI
    [ 0.170056] ACPI: SSDT 00000000be6e1aef 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
    [ 0.171067] ACPI: Dynamic OEM Table Load:
    [ 0.171073] ACPI: SSDT (null) 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
    [ 0.171422] ACPI: SSDT 00000000be6e1a6a 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
    [ 0.172356] ACPI: Dynamic OEM Table Load:
    [ 0.172362] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
    [ 0.172394] ACPI: Interpreter enabled
    [ 0.172394] ACPI: (supports S0 S3 S4 S5)
    [ 0.172394] ACPI: Using IOAPIC for interrupt routing
    [ 0.177412] ACPI: Power Resource [PUBS] (on)
    [ 0.180918] ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
    [ 0.184454] ACPI: ACPI Dock Station Driver: 3 docks/bays found
    [ 0.184462] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.184462] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.184462] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
    [ 0.184462] PCI host bridge to bus 0000:00
    [ 0.184462] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.184462] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.184462] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.184462] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.184462] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.184462] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.184462] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.184462] pci_bus 0000:00: root bus resource [mem 0xbf000000-0xfebfffff]
    [ 0.184462] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
    [ 0.184462] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
    [ 0.184462] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
    [ 0.184462] pci 0000:00:02.0: reg 10: [mem 0xf8100000-0xf81fffff 64bit]
    [ 0.184462] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.184462] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
    [ 0.184462] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
    [ 0.184462] pci 0000:00:02.1: reg 10: [mem 0xf8200000-0xf82fffff 64bit]
    [ 0.184462] pci 0000:00:19.0: [8086:1049] type 00 class 0x020000
    [ 0.184462] pci 0000:00:19.0: reg 10: [mem 0xfe000000-0xfe01ffff]
    [ 0.184462] pci 0000:00:19.0: reg 14: [mem 0xfe025000-0xfe025fff]
    [ 0.184462] pci 0000:00:19.0: reg 18: [io 0x1840-0x185f]
    [ 0.184462] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [ 0.184462] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
    [ 0.184588] pci 0000:00:1a.0: reg 20: [io 0x1860-0x187f]
    [ 0.184699] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
    [ 0.184850] pci 0000:00:1a.1: reg 20: [io 0x1880-0x189f]
    [ 0.184992] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
    [ 0.185046] pci 0000:00:1a.7: reg 10: [mem 0xfe226c00-0xfe226fff]
    [ 0.185305] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.185386] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
    [ 0.185446] pci 0000:00:1b.0: reg 10: [mem 0xfe020000-0xfe023fff 64bit]
    [ 0.185725] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.185810] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
    [ 0.186107] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.186189] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
    [ 0.186472] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.186563] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
    [ 0.186861] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.186951] pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400
    [ 0.187249] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.187340] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
    [ 0.187631] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.187718] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
    [ 0.187866] pci 0000:00:1d.0: reg 20: [io 0x18a0-0x18bf]
    [ 0.187980] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
    [ 0.188132] pci 0000:00:1d.1: reg 20: [io 0x18c0-0x18df]
    [ 0.188244] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
    [ 0.188389] pci 0000:00:1d.2: reg 20: [io 0x18e0-0x18ff]
    [ 0.188540] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
    [ 0.188605] pci 0000:00:1d.7: reg 10: [mem 0xfe227000-0xfe2273ff]
    [ 0.188893] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.188960] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 0.189213] pci 0000:00:1f.0: [8086:2811] type 00 class 0x060100
    [ 0.189448] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
    [ 0.189461] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
    [ 0.189471] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
    [ 0.189479] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
    [ 0.189488] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
    [ 0.189613] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
    [ 0.189656] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
    [ 0.189687] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
    [ 0.189719] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
    [ 0.189751] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
    [ 0.189782] pci 0000:00:1f.1: reg 20: [io 0x1c00-0x1c0f]
    [ 0.189925] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
    [ 0.190005] pci 0000:00:1f.2: reg 10: [io 0x1c50-0x1c57]
    [ 0.190036] pci 0000:00:1f.2: reg 14: [io 0x1c44-0x1c47]
    [ 0.190068] pci 0000:00:1f.2: reg 18: [io 0x1c48-0x1c4f]
    [ 0.190100] pci 0000:00:1f.2: reg 1c: [io 0x1c40-0x1c43]
    [ 0.190131] pci 0000:00:1f.2: reg 20: [io 0x1c20-0x1c3f]
    [ 0.190160] pci 0000:00:1f.2: reg 24: [mem 0xfe226000-0xfe2267ff]
    [ 0.190339] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.190403] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
    [ 0.190448] pci 0000:00:1f.3: reg 10: [mem 0xfe227400-0xfe2274ff]
    [ 0.190562] pci 0000:00:1f.3: reg 20: [io 0x1c60-0x1c7f]
    [ 0.190820] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.190833] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.190845] pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfdffffff]
    [ 0.190863] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
    [ 0.191139] pci 0000:03:00.0: [8086:4227] type 00 class 0x028000
    [ 0.191201] pci 0000:03:00.0: reg 10: [mem 0xdf3ff000-0xdf3fffff]
    [ 0.191653] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
    [ 0.200091] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 0.200100] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    [ 0.200108] pci 0000:00:1c.1: bridge window [mem 0xdc000000-0xdf3fffff]
    [ 0.200120] pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref]
    [ 0.200236] pci 0000:00:1c.2: PCI bridge to [bus 04]
    [ 0.200248] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
    [ 0.200260] pci 0000:00:1c.2: bridge window [mem 0xd8000000-0xd9ffffff]
    [ 0.200280] pci 0000:00:1c.2: bridge window [mem 0xdfb00000-0xdfbfffff 64bit pref]
    [ 0.200446] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
    [ 0.200458] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
    [ 0.200470] pci 0000:00:1c.3: bridge window [mem 0xd4000000-0xd5ffffff]
    [ 0.200490] pci 0000:00:1c.3: bridge window [mem 0xdf800000-0xdf8fffff 64bit pref]
    [ 0.200649] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
    [ 0.200661] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
    [ 0.200671] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd1ffffff]
    [ 0.200691] pci 0000:00:1c.4: bridge window [mem 0xdf500000-0xdf5fffff 64bit pref]
    [ 0.200808] pci 0000:15:00.0: [1180:0476] type 02 class 0x060700
    [ 0.200862] pci 0000:15:00.0: proprietary Ricoh MMC controller disabled (via cardbus function)
    [ 0.200865] pci 0000:15:00.0: MMC cards are now supported by standard SDHCI controller
    [ 0.200907] pci 0000:15:00.0: reg 10: [mem 0xf8300000-0xf8300fff]
    [ 0.201003] pci 0000:15:00.0: supports D1 D2
    [ 0.201008] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.201070] pci 0000:15:00.1: [1180:0832] type 00 class 0x0c0010
    [ 0.201128] pci 0000:15:00.1: reg 10: [mem 0xf8301000-0xf83017ff]
    [ 0.201392] pci 0000:15:00.1: supports D1 D2
    [ 0.201396] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.201459] pci 0000:15:00.2: [1180:0822] type 00 class 0x080500
    [ 0.201517] pci 0000:15:00.2: reg 10: [mem 0xf8301800-0xf83018ff]
    [ 0.201781] pci 0000:15:00.2: supports D1 D2
    [ 0.201785] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.201848] pci 0000:15:00.4: [1180:0592] type 00 class 0x088000
    [ 0.201907] pci 0000:15:00.4: reg 10: [mem 0xf8302000-0xf83020ff]
    [ 0.202168] pci 0000:15:00.4: supports D1 D2
    [ 0.202172] pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.202235] pci 0000:15:00.5: [1180:0852] type 00 class 0x088000
    [ 0.202293] pci 0000:15:00.5: reg 10: [mem 0xf8302400-0xf83024ff]
    [ 0.202554] pci 0000:15:00.5: supports D1 D2
    [ 0.202558] pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.202730] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
    [ 0.202742] pci 0000:00:1e.0: bridge window [io 0x7000-0xafff]
    [ 0.202755] pci 0000:00:1e.0: bridge window [mem 0xf8300000-0xfbffffff]
    [ 0.202775] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
    [ 0.202779] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.202784] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.202788] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.202793] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 0.202797] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    [ 0.202801] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    [ 0.202806] pci 0000:00:1e.0: bridge window [mem 0xbf000000-0xfebfffff] (subtractive decode)
    [ 0.202810] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed4bfff] (subtractive decode)
    [ 0.202916] pci_bus 0000:16: busn_res: can not insert [bus 16-ff] under [bus 15-18] (conflicts with (null) [bus 15-18])
    [ 0.202927] pci_bus 0000:16: busn_res: [bus 16-ff] end is updated to 17
    [ 0.203040] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.203194] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
    [ 0.203241] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
    [ 0.203286] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
    [ 0.203337] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
    [ 0.203398] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
    [ 0.203450] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    [ 0.203867] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.204419] pci0000:00: ACPI _OSC control (0x1d) granted
    [ 0.213100] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
    [ 0.213218] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.213338] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.213453] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.213566] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.213678] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.213795] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.213907] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.216702] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.216715] vgaarb: loaded
    [ 0.216718] vgaarb: bridge control possible 0000:00:02.0
    [ 0.216791] PCI: Using ACPI for IRQ routing
    [ 0.217268] PCI: pci_cache_line_size set to 64 bytes
    [ 0.217440] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [ 0.217445] e820: reserve RAM buffer [mem 0xbe6b0000-0xbfffffff]
    [ 0.217631] NetLabel: Initializing
    [ 0.217635] NetLabel: domain hash size = 128
    [ 0.217637] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.217665] NetLabel: unlabeled traffic allowed by default
    [ 0.217694] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.217700] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.217708] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [ 0.230023] Switching to clocksource hpet
    [ 0.241152] pnp: PnP ACPI init
    [ 0.241186] ACPI: bus type pnp registered
    [ 0.241858] pnp 00:00: [mem 0x00000000-0x0009ffff]
    [ 0.241863] pnp 00:00: [mem 0x000c0000-0x000c3fff]
    [ 0.241868] pnp 00:00: [mem 0x000c4000-0x000c7fff]
    [ 0.241878] pnp 00:00: [mem 0x000c8000-0x000cbfff]
    [ 0.241882] pnp 00:00: [mem 0x000cc000-0x000cffff]
    [ 0.241886] pnp 00:00: [mem 0x000d0000-0x000d3fff]
    [ 0.241890] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
    [ 0.241894] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
    [ 0.241898] pnp 00:00: [mem 0x000dc000-0x000dbfff disabled]
    [ 0.241902] pnp 00:00: [mem 0x000e0000-0x000e3fff]
    [ 0.241906] pnp 00:00: [mem 0x000e4000-0x000e7fff]
    [ 0.241910] pnp 00:00: [mem 0x000e8000-0x000ebfff]
    [ 0.241914] pnp 00:00: [mem 0x000ec000-0x000effff]
    [ 0.241918] pnp 00:00: [mem 0x000f0000-0x000fffff]
    [ 0.241922] pnp 00:00: [mem 0x00100000-0xbeffffff]
    [ 0.241926] pnp 00:00: [mem 0xfec00000-0xfed3ffff]
    [ 0.241930] pnp 00:00: [mem 0xfed4c000-0xffffffff]
    [ 0.242062] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.242068] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
    [ 0.242073] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
    [ 0.242078] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
    [ 0.242083] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
    [ 0.242088] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
    [ 0.242093] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
    [ 0.242098] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
    [ 0.242103] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
    [ 0.242108] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
    [ 0.242113] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
    [ 0.242118] system 00:00: [mem 0x00100000-0xbeffffff] could not be reserved
    [ 0.242124] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
    [ 0.242129] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
    [ 0.242138] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.242179] pnp 00:01: [bus 00-ff]
    [ 0.242184] pnp 00:01: [io 0x0cf8-0x0cff]
    [ 0.242188] pnp 00:01: [io 0x0000-0x0cf7 window]
    [ 0.242193] pnp 00:01: [io 0x0d00-0xffff window]
    [ 0.242197] pnp 00:01: [mem 0x000a0000-0x000bffff window]
    [ 0.242202] pnp 00:01: [mem 0x000c0000-0x000c3fff window]
    [ 0.242206] pnp 00:01: [mem 0x000c4000-0x000c7fff window]
    [ 0.242211] pnp 00:01: [mem 0x000c8000-0x000cbfff window]
    [ 0.242215] pnp 00:01: [mem 0x000cc000-0x000cffff window]
    [ 0.242219] pnp 00:01: [mem 0x000d0000-0x000d3fff window]
    [ 0.242223] pnp 00:01: [mem 0x000d4000-0x000d7fff window]
    [ 0.242227] pnp 00:01: [mem 0x000d8000-0x000dbfff window]
    [ 0.242232] pnp 00:01: [mem 0x000dc000-0x000dffff window]
    [ 0.242236] pnp 00:01: [mem 0x000e0000-0x000e3fff window]
    [ 0.242240] pnp 00:01: [mem 0x000e4000-0x000e7fff window]
    [ 0.242244] pnp 00:01: [mem 0x000e8000-0x000ebfff window]
    [ 0.242248] pnp 00:01: [mem 0x000ec000-0x000effff window]
    [ 0.242253] pnp 00:01: [mem 0xbf000000-0xfebfffff window]
    [ 0.242257] pnp 00:01: [mem 0xfed40000-0xfed4bfff window]
    [ 0.242329] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.242400] pnp 00:02: [io 0x0010-0x001f]
    [ 0.242405] pnp 00:02: [io 0x0090-0x009f]
    [ 0.242409] pnp 00:02: [io 0x0024-0x0025]
    [ 0.242413] pnp 00:02: [io 0x0028-0x0029]
    [ 0.242417] pnp 00:02: [io 0x002c-0x002d]
    [ 0.242421] pnp 00:02: [io 0x0030-0x0031]
    [ 0.242424] pnp 00:02: [io 0x0034-0x0035]
    [ 0.242428] pnp 00:02: [io 0x0038-0x0039]
    [ 0.242432] pnp 00:02: [io 0x003c-0x003d]
    [ 0.242441] pnp 00:02: [io 0x00a4-0x00a5]
    [ 0.242445] pnp 00:02: [io 0x00a8-0x00a9]
    [ 0.242449] pnp 00:02: [io 0x00ac-0x00ad]
    [ 0.242452] pnp 00:02: [io 0x00b0-0x00b5]
    [ 0.242456] pnp 00:02: [io 0x00b8-0x00b9]
    [ 0.242460] pnp 00:02: [io 0x00bc-0x00bd]
    [ 0.242464] pnp 00:02: [io 0x0050-0x0053]
    [ 0.242468] pnp 00:02: [io 0x0072-0x0077]
    [ 0.242472] pnp 00:02: [io 0x164e-0x164f]
    [ 0.242476] pnp 00:02: [io 0x002e-0x002f]
    [ 0.242479] pnp 00:02: [io 0x1000-0x107f]
    [ 0.242483] pnp 00:02: [io 0x1180-0x11bf]
    [ 0.242487] pnp 00:02: [io 0x0800-0x080f]
    [ 0.242491] pnp 00:02: [io 0x15e0-0x15ef]
    [ 0.242495] pnp 00:02: [io 0x1600-0x165f]
    [ 0.242499] pnp 00:02: [mem 0xf0000000-0xf3ffffff]
    [ 0.242503] pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
    [ 0.242507] pnp 00:02: [mem 0xfed14000-0xfed17fff]
    [ 0.242511] pnp 00:02: [mem 0xfed18000-0xfed18fff]
    [ 0.242515] pnp 00:02: [mem 0xfed19000-0xfed19fff]
    [ 0.242519] pnp 00:02: [mem 0xfed45000-0xfed4bfff]
    [ 0.242663] system 00:02: [io 0x164e-0x164f] has been reserved
    [ 0.242668] system 00:02: [io 0x1000-0x107f] has been reserved
    [ 0.242674] system 00:02: [io 0x1180-0x11bf] has been reserved
    [ 0.242679] system 00:02: [io 0x0800-0x080f] has been reserved
    [ 0.242684] system 00:02: [io 0x15e0-0x15ef] has been reserved
    [ 0.242689] system 00:02: [io 0x1600-0x165f] could not be reserved
    [ 0.242695] system 00:02: [mem 0xf0000000-0xf3ffffff] has been reserved
    [ 0.242700] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.242706] system 00:02: [mem 0xfed14000-0xfed17fff] has been reserved
    [ 0.242711] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.242716] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.242721] system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved
    [ 0.242728] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.242791] pnp 00:03: [mem 0xfed00000-0xfed003ff]
    [ 0.242838] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.242855] pnp 00:04: [io 0x0000-0x000f]
    [ 0.242859] pnp 00:04: [io 0x0080-0x008f]
    [ 0.242863] pnp 00:04: [io 0x00c0-0x00df]
    [ 0.242868] pnp 00:04: [dma 4]
    [ 0.242913] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.242927] pnp 00:05: [io 0x0061]
    [ 0.242969] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.242984] pnp 00:06: [io 0x00f0]
    [ 0.243003] pnp 00:06: [irq 13]
    [ 0.243052] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.243068] pnp 00:07: [io 0x0070-0x0071]
    [ 0.243078] pnp 00:07: [irq 8]
    [ 0.243119] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.243135] pnp 00:08: [io 0x0060]
    [ 0.243140] pnp 00:08: [io 0x0064]
    [ 0.243149] pnp 00:08: [irq 1]
    [ 0.243194] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.243215] pnp 00:09: [irq 12]
    [ 0.243258] pnp 00:09: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
    [ 0.243896] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
    [ 0.243949] pnp 00:0a: Plug and Play ACPI device, IDs ATM1200 PNP0c31 (active)
    [ 0.244685] pnp: PnP ACPI: found 11 devices
    [ 0.244689] ACPI: ACPI bus type pnp unregistered
    [ 0.253426] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.253435] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.253445] pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfdffffff]
    [ 0.253454] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
    [ 0.253466] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 0.253472] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    [ 0.253481] pci 0000:00:1c.1: bridge window [mem 0xdc000000-0xdf3fffff]
    [ 0.253490] pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref]
    [ 0.253501] pci 0000:00:1c.2: PCI bridge to [bus 04]
    [ 0.253507] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
    [ 0.253517] pci 0000:00:1c.2: bridge window [mem 0xd8000000-0xd9ffffff]
    [ 0.253525] pci 0000:00:1c.2: bridge window [mem 0xdfb00000-0xdfbfffff 64bit pref]
    [ 0.253537] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
    [ 0.253543] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
    [ 0.253552] pci 0000:00:1c.3: bridge window [mem 0xd4000000-0xd5ffffff]
    [ 0.253560] pci 0000:00:1c.3: bridge window [mem 0xdf800000-0xdf8fffff 64bit pref]
    [ 0.253572] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
    [ 0.253578] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
    [ 0.253587] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd1ffffff]
    [ 0.253595] pci 0000:00:1c.4: bridge window [mem 0xdf500000-0xdf5fffff 64bit pref]
    [ 0.253611] pci 0000:15:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
    [ 0.253616] pci 0000:15:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
    [ 0.253621] pci 0000:15:00.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    [ 0.253626] pci 0000:15:00.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    [ 0.253634] pci 0000:15:00.0: BAR 15: assigned [mem 0xf4000000-0xf7ffffff pref]
    [ 0.253642] pci 0000:15:00.0: BAR 16: assigned [mem 0xc0000000-0xc3ffffff]
    [ 0.253647] pci 0000:15:00.0: BAR 13: assigned [io 0x7000-0x70ff]
    [ 0.253652] pci 0000:15:00.0: BAR 14: assigned [io 0x7400-0x74ff]
    [ 0.253657] pci 0000:15:00.0: CardBus bridge to [bus 16-17]
    [ 0.253661] pci 0000:15:00.0: bridge window [io 0x7000-0x70ff]
    [ 0.253670] pci 0000:15:00.0: bridge window [io 0x7400-0x74ff]
    [ 0.253679] pci 0000:15:00.0: bridge window [mem 0xf4000000-0xf7ffffff pref]
    [ 0.253688] pci 0000:15:00.0: bridge window [mem 0xc0000000-0xc3ffffff]
    [ 0.253697] pci 0000:00:1e.0: PCI bridge to [bus 15-18]
    [ 0.253703] pci 0000:00:1e.0: bridge window [io 0x7000-0xafff]
    [ 0.253713] pci 0000:00:1e.0: bridge window [mem 0xf8300000-0xfbffffff]
    [ 0.253721] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
    [ 0.253801] pci 0000:00:1e.0: enabling device (0005 -> 0007)
    [ 0.253811] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.253834] pci 0000:15:00.0: setting latency timer to 64
    [ 0.253842] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.253847] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.253851] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.253856] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
    [ 0.253860] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
    [ 0.253864] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
    [ 0.253869] pci_bus 0000:00: resource 10 [mem 0xbf000000-0xfebfffff]
    [ 0.253873] pci_bus 0000:00: resource 11 [mem 0xfed40000-0xfed4bfff]
    [ 0.253877] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.253882] pci_bus 0000:02: resource 1 [mem 0xfc000000-0xfdffffff]
    [ 0.253886] pci_bus 0000:02: resource 2 [mem 0xf8000000-0xf80fffff 64bit pref]
    [ 0.253891] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
    [ 0.253895] pci_bus 0000:03: resource 1 [mem 0xdc000000-0xdf3fffff]
    [ 0.253900] pci_bus 0000:03: resource 2 [mem 0xdfe00000-0xdfefffff 64bit pref]
    [ 0.253904] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
    [ 0.253908] pci_bus 0000:04: resource 1 [mem 0xd8000000-0xd9ffffff]
    [ 0.253913] pci_bus 0000:04: resource 2 [mem 0xdfb00000-0xdfbfffff 64bit pref]
    [ 0.253917] pci_bus 0000:05: resource 0 [io 0x5000-0x5fff]
    [ 0.253921] pci_bus 0000:05: resource 1 [mem 0xd4000000-0xd5ffffff]
    [ 0.253926] pci_bus 0000:05: resource 2 [mem 0xdf800000-0xdf8fffff 64bit pref]
    [ 0.253930] pci_bus 0000:0d: resource 0 [io 0x6000-0x6fff]
    [ 0.253935] pci_bus 0000:0d: resource 1 [mem 0xd0000000-0xd1ffffff]
    [ 0.253939] pci_bus 0000:0d: resource 2 [mem 0xdf500000-0xdf5fffff 64bit pref]
    [ 0.253943] pci_bus 0000:15: resource 0 [io 0x7000-0xafff]
    [ 0.253948] pci_bus 0000:15: resource 1 [mem 0xf8300000-0xfbffffff]
    [ 0.253952] pci_bus 0000:15: resource 2 [mem 0xf4000000-0xf7ffffff 64bit pref]
    [ 0.253956] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7]
    [ 0.253961] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff]
    [ 0.253965] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.253969] pci_bus 0000:15: resource 7 [mem 0x000d4000-0x000d7fff]
    [ 0.253973] pci_bus 0000:15: resource 8 [mem 0x000d8000-0x000dbfff]
    [ 0.253978] pci_bus 0000:15: resource 9 [mem 0x000dc000-0x000dffff]
    [ 0.253982] pci_bus 0000:15: resource 10 [mem 0xbf000000-0xfebfffff]
    [ 0.253986] pci_bus 0000:15: resource 11 [mem 0xfed40000-0xfed4bfff]
    [ 0.253991] pci_bus 0000:16: resource 0 [io 0x7000-0x70ff]
    [ 0.253995] pci_bus 0000:16: resource 1 [io 0x7400-0x74ff]
    [ 0.253999] pci_bus 0000:16: resource 2 [mem 0xf4000000-0xf7ffffff pref]
    [ 0.254004] pci_bus 0000:16: resource 3 [mem 0xc0000000-0xc3ffffff]
    [ 0.254070] NET: Registered protocol family 2
    [ 0.255457] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.261656] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.262461] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.262588] TCP: reno registered
    [ 0.262605] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.262669] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.262858] NET: Registered protocol family 1
    [ 0.262887] pci 0000:00:02.0: Boot video device
    [ 0.262954] pci 0000:00:1a.1: power state changed by ACPI to D0
    [ 0.263064] pci 0000:00:1d.0: power state changed by ACPI to D0
    [ 0.263144] pci 0000:00:1d.2: power state changed by ACPI to D0
    [ 0.263269] PCI: CLS 64 bytes, default 64
    [ 0.263404] Unpacking initramfs...
    [ 0.381385] Freeing initrd memory: 3008k freed
    [ 0.383142] Simple Boot Flag at 0x35 set to 0x1
    [ 0.383770] audit: initializing netlink socket (disabled)
    [ 0.383796] type=2000 audit(1360598852.383:1): initialized
    [ 0.406333] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.409592] VFS: Disk quotas dquot_6.5.2
    [ 0.409682] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.410020] msgmni has been set to 5973
    [ 0.410394] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.410438] io scheduler noop registered
    [ 0.410442] io scheduler deadline registered
    [ 0.410500] io scheduler cfq registered (default)
    [ 0.410773] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 0.411021] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
    [ 0.411259] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
    [ 0.411502] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
    [ 0.411743] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
    [ 0.411960] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 0.411970] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 0.412008] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
    [ 0.412012] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
    [ 0.412021] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
    [ 0.412055] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
    [ 0.412063] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
    [ 0.412096] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
    [ 0.412105] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
    [ 0.412144] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
    [ 0.412152] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
    [ 0.412275] vesafb: mode is 1280x800x32, linelength=5120, pages=0
    [ 0.412278] vesafb: scrolling: redraw
    [ 0.412282] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.413060] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005000000, using 4032k, total 4032k
    [ 0.470284] Console: switching to colour frame buffer device 160x50
    [ 0.527327] fb0: VESA VGA frame buffer device
    [ 0.527346] intel_idle: does not run on family 6 model 15
    [ 0.527398] GHES: HEST is not enabled!
    [ 0.527510] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.528201] Linux agpgart interface v0.103
    [ 0.528345] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    [ 0.535966] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.536026] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.536202] mousedev: PS/2 mouse device common for all mice
    [ 0.536311] rtc_cmos 00:07: RTC can wake from S4
    [ 0.536519] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    [ 0.536558] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 0.536573] cpuidle: using governor ladder
    [ 0.536576] cpuidle: using governor menu
    [ 0.536664] drop_monitor: Initializing network drop monitor service
    [ 0.536802] TCP: cubic registered
    [ 0.537011] NET: Registered protocol family 10
    [ 0.537302] NET: Registered protocol family 17
    [ 0.537323] Key type dns_resolver registered
    [ 0.537728] PM:

    The bug is known, and a patch has been submitted: https://bugs.freedesktop.org/show_bug.cgi?id=80151. There's been no update since friday, so I wonder what the current status is, or if it's up for review at all.
    Does anyone know how we can be notified when this patch hits the kernel?

  • Can I connect a 24" Cinema Display with mini DisplayPort in to HDMI out?

    I have a 24" LED Cinema Display that I want to use with a new 15" Retina MacBook Pro I will soon be purchasing. Using cable adaptors, would it be possible use the new Macbook Pro's HDMI port to connect to this Cinema Display? I understand that this does not work with the newer Thunderbolt displays because Thunderbolt only adapts in one direction, but since this is an older Mini Displayport monitor would it work? My goal is to keep both Thunderbolt ports available for storage I/O untill Apple releases an update to the Thunderbolt display later this or next year. Thanks for your advice!

    Yes, in this scenario, I'd connect the display to one of the Thunderbolt ports and use a USB hub for additional I/O. Here's my current I/O needs:
    1) esata (with port multiplication)
    2) gigabit ethernet
    3) firewire 800
    4) USB keyboard
    5) 3-port USB hub (iOS, bluetooth charger, misc USB2 or 3)
    6) monitor
    My current plan is to use
    1) thunderbolt 1 - display
    2) thunderbolt 2 - firewire 800
    3) USB3 1 - esata
    4) USB3 2 - USB3 hub - gigbit ethernet and all other USB devices
    Does this seem like a resaonable set-up in terms of maxing I/O bandwidth? My main concern is if the USB2 devices on the USB3 hub will throttledown my gigabit ethernet speeds.
    Thanks for your advice!

  • GDM displays only a black screen and a cursor, before login screen

    I'm using the xf86-video-ati driver for an R9 270, and GDM (v3.16.1.1) only shows a black screen with cursor. I can run TWM fine with startx, and I've got 2 displays attached via DVI.
    Here's my Xorg.0.log:
    [ 2.743]
    X.Org X Server 1.17.1
    Release Date: 2015-02-10
    [ 2.743] X Protocol Version 11, Revision 0
    [ 2.743] Build Operating System: Linux 3.19.2-1-ARCH x86_64
    [ 2.743] Current Operating System: Linux spitfire 3.19.3-3-ARCH #1 SMP PREEMPT Wed Apr 8 14:10:00 CEST 2015 x86_64
    [ 2.743] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw nomodeset
    [ 2.743] Build Date: 14 April 2015 10:34:18AM
    [ 2.743]
    [ 2.743] Current version of pixman: 0.32.6
    [ 2.743] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2.743] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2.743] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 29 02:52:10 2015
    [ 2.744] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 2.744] (==) No Layout section. Using the first Screen section.
    [ 2.745] (==) No screen section available. Using defaults.
    [ 2.745] (**) |-->Screen "Default Screen Section" (0)
    [ 2.745] (**) | |-->Monitor "<default monitor>"
    [ 2.745] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 2.745] (==) Automatically adding devices
    [ 2.745] (==) Automatically enabling devices
    [ 2.745] (==) Automatically adding GPU devices
    [ 2.748] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
    [ 2.748] Entry deleted from font path.
    [ 2.748] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
    [ 2.748] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 2.748] Entry deleted from font path.
    [ 2.752] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 2.752] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2.752] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 2.753] (II) Loader magic: 0x815d80
    [ 2.753] (II) Module ABI versions:
    [ 2.753] X.Org ANSI C Emulation: 0.4
    [ 2.753] X.Org Video Driver: 19.0
    [ 2.753] X.Org XInput driver : 21.0
    [ 2.753] X.Org Server Extension : 9.0
    [ 2.754] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
    [ 2.754] (--) PCI:*(0:1:0:0) 1002:6811:1458:226c rev 0, Mem @ 0xd0000000/268435456, 0xefe00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
    [ 2.754] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 2.755] (II) LoadModule: "glx"
    [ 2.755] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 2.758] (II) Module glx: vendor="X.Org Foundation"
    [ 2.758] compiled for 1.17.1, module version = 1.0.0
    [ 2.758] ABI class: X.Org Server Extension, version 9.0
    [ 2.758] (==) AIGLX enabled
    [ 2.758] (==) Matched ati as autoconfigured driver 0
    [ 2.758] (==) Matched modesetting as autoconfigured driver 1
    [ 2.758] (==) Matched fbdev as autoconfigured driver 2
    [ 2.758] (==) Matched vesa as autoconfigured driver 3
    [ 2.758] (==) Assigned the driver to the xf86ConfigLayout
    [ 2.758] (II) LoadModule: "ati"
    [ 2.758] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    [ 2.758] (II) Module ati: vendor="X.Org Foundation"
    [ 2.758] compiled for 1.17.0, module version = 7.5.0
    [ 2.758] Module class: X.Org Video Driver
    [ 2.758] ABI class: X.Org Video Driver, version 19.0
    [ 2.758] (II) LoadModule: "radeon"
    [ 2.758] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [ 2.761] (II) Module radeon: vendor="X.Org Foundation"
    [ 2.761] compiled for 1.17.0, module version = 7.5.0
    [ 2.761] Module class: X.Org Video Driver
    [ 2.761] ABI class: X.Org Video Driver, version 19.0
    [ 2.761] (II) LoadModule: "modesetting"
    [ 2.761] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [ 2.761] (II) Module modesetting: vendor="X.Org Foundation"
    [ 2.761] compiled for 1.17.1, module version = 1.17.1
    [ 2.761] Module class: X.Org Video Driver
    [ 2.761] ABI class: X.Org Video Driver, version 19.0
    [ 2.761] (II) LoadModule: "fbdev"
    [ 2.761] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [ 2.762] (II) Module fbdev: vendor="X.Org Foundation"
    [ 2.762] compiled for 1.17.0, module version = 0.4.4
    [ 2.762] Module class: X.Org Video Driver
    [ 2.762] ABI class: X.Org Video Driver, version 19.0
    [ 2.762] (II) LoadModule: "vesa"
    [ 2.762] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 2.762] (II) Module vesa: vendor="X.Org Foundation"
    [ 2.762] compiled for 1.17.0, module version = 2.3.2
    [ 2.762] Module class: X.Org Video Driver
    [ 2.762] ABI class: X.Org Video Driver, version 19.0
    [ 2.762] (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
    ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
    ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
    ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
    ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
    ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
    ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
    ATI Mobility Radeon HD 4670, ATI FirePro M5750,
    ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
    ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
    ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
    ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
    ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
    ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
    ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
    ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
    ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
    ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
    ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
    ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
    SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
    ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
    AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
    AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
    AMD Radeon HD 6300 Series Graphics,
    AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
    AMD Firestream 9350, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
    ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
    ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
    ATI Mobility Radeon Graphics, CEDAR,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
    ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
    CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
    BARTS, BARTS, Mobility Radeon HD 6000 Series,
    Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
    AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
    AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
    TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
    TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
    PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
    VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
    VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
    VERDE, VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
    OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
    HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE,
    BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
    BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
    KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
    KABINI, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
    MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
    MULLINS, MULLINS, MULLINS, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
    HAWAII, HAWAII, HAWAII, HAWAII, HAWAII
    [ 2.776] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [ 2.776] (II) FBDEV: driver for framebuffer: fbdev
    [ 2.776] (II) VESA: driver for VESA chipsets: vesa
    [ 2.776] (++) using VT number 1
    [ 2.776] (II) [KMS] drm report modesetting isn't supported.
    [ 2.776] (EE) open /dev/dri/card0: No such file or directory
    [ 2.776] (WW) Falling back to old probe method for modesetting
    [ 2.776] (EE) open /dev/dri/card0: No such file or directory
    [ 2.776] (II) Loading sub module "fbdevhw"
    [ 2.776] (II) LoadModule: "fbdevhw"
    [ 2.776] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
    [ 2.777] (II) Module fbdevhw: vendor="X.Org Foundation"
    [ 2.777] compiled for 1.17.1, module version = 0.0.2
    [ 2.777] ABI class: X.Org Video Driver, version 19.0
    [ 2.777] (**) FBDEV(2): claimed PCI slot 1@0:0:0
    [ 2.777] (II) FBDEV(2): using default device
    [ 2.777] (WW) Falling back to old probe method for vesa
    [ 2.777] (EE) Screen 0 deleted because of no matching config section.
    [ 2.777] (II) UnloadModule: "radeon"
    [ 2.777] (EE) Screen 0 deleted because of no matching config section.
    [ 2.777] (II) UnloadModule: "modesetting"
    [ 2.777] (II) FBDEV(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 2.777] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
    [ 2.777] (==) FBDEV(0): RGB weight 888
    [ 2.777] (==) FBDEV(0): Default visual is TrueColor
    [ 2.777] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 2.777] (II) FBDEV(0): hardware: EFI VGA (video memory: 3072kB)
    [ 2.777] (II) FBDEV(0): checking modes against framebuffer device...
    [ 2.777] (II) FBDEV(0): checking modes against monitor...
    [ 2.777] (--) FBDEV(0): Virtual size is 1024x768 (pitch 1024)
    [ 2.777] (**) FBDEV(0): Built-in mode "current": 78.7 MHz, 59.9 kHz, 75.7 Hz
    [ 2.777] (II) FBDEV(0): Modeline "current"x0.0 78.65 1024 1056 1184 1312 768 772 776 792 -hsync -vsync -csync (59.9 kHz b)
    [ 2.777] (==) FBDEV(0): DPI set to (96, 96)
    [ 2.777] (II) Loading sub module "fb"
    [ 2.777] (II) LoadModule: "fb"
    [ 2.777] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 2.778] (II) Module fb: vendor="X.Org Foundation"
    [ 2.778] compiled for 1.17.1, module version = 1.0.0
    [ 2.778] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2.778] (**) FBDEV(0): using shadow framebuffer
    [ 2.778] (II) Loading sub module "shadow"
    [ 2.778] (II) LoadModule: "shadow"
    [ 2.778] (II) Loading /usr/lib/xorg/modules/libshadow.so
    [ 2.779] (II) Module shadow: vendor="X.Org Foundation"
    [ 2.779] compiled for 1.17.1, module version = 1.1.0
    [ 2.779] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2.779] (II) UnloadModule: "vesa"
    [ 2.779] (II) Unloading vesa
    [ 2.779] (==) Depth 24 pixmap format is 32 bpp
    [ 2.779] (EE) FBDEV(0): FBIOBLANK: Invalid argument
    [ 2.781] (==) FBDEV(0): Backing store enabled
    [ 2.782] (==) FBDEV(0): DPMS enabled
    [ 2.782] (==) RandR enabled
    [ 2.786] (II) AIGLX: Screen 0 is not DRI2 capable
    [ 2.786] (EE) AIGLX: reverting to software rendering
    [ 2.874] (II) AIGLX: Loaded and initialized swrast
    [ 2.874] (II) GLX: Initialized DRISWRAST GL provider for screen 0
    [ 2.932] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 2.932] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2.932] (**) Power Button: Applying InputClass "libinput keyboard catchall"
    [ 2.932] (II) LoadModule: "libinput"
    [ 2.932] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
    [ 2.933] (II) Module libinput: vendor="X.Org Foundation"
    [ 2.933] compiled for 1.17.1, module version = 0.9.0
    [ 2.933] Module class: X.Org XInput Driver
    [ 2.933] ABI class: X.Org XInput driver, version 21.0
    [ 2.933] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 14 paused 0
    [ 2.933] (II) Using input driver 'libinput' for 'Power Button'
    [ 2.933] (**) Power Button: always reports core events
    [ 2.933] (**) Option "Device" "/dev/input/event2"
    [ 2.934] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
    [ 2.934] (II) input device 'Power Button', /dev/input/event2 is a keyboard
    [ 2.934] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event2"
    [ 2.934] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 2.934] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
    [ 2.934] (II) input device 'Power Button', /dev/input/event2 is a keyboard
    [ 2.934] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 2.934] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2.934] (**) Power Button: Applying InputClass "libinput keyboard catchall"
    [ 2.934] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 17 paused 0
    [ 2.934] (II) Using input driver 'libinput' for 'Power Button'
    [ 2.934] (**) Power Button: always reports core events
    [ 2.934] (**) Option "Device" "/dev/input/event0"
    [ 2.934] (II) input device 'Power Button', /dev/input/event0 is tagged by udev as: Keyboard
    [ 2.934] (II) input device 'Power Button', /dev/input/event0 is a keyboard
    [ 2.934] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event0"
    [ 2.934] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 2.935] (II) input device 'Power Button', /dev/input/event0 is tagged by udev as: Keyboard
    [ 2.935] (II) input device 'Power Button', /dev/input/event0 is a keyboard
    [ 2.935] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
    [ 2.935] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 2.935] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
    [ 2.935] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 18 paused 0
    [ 2.935] (II) Using input driver 'libinput' for 'Sleep Button'
    [ 2.935] (**) Sleep Button: always reports core events
    [ 2.935] (**) Option "Device" "/dev/input/event1"
    [ 2.935] (II) input device 'Sleep Button', /dev/input/event1 is tagged by udev as: Keyboard
    [ 2.935] (II) input device 'Sleep Button', /dev/input/event1 is a keyboard
    [ 2.935] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event1"
    [ 2.935] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
    [ 2.935] (II) input device 'Sleep Button', /dev/input/event1 is tagged by udev as: Keyboard
    [ 2.935] (II) input device 'Sleep Button', /dev/input/event1 is a keyboard
    [ 2.935] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event7)
    [ 2.935] (II) No input driver specified, ignoring this device.
    [ 2.935] (II) This device may have been added with another device file.
    [ 2.936] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event8)
    [ 2.936] (II) No input driver specified, ignoring this device.
    [ 2.936] (II) This device may have been added with another device file.
    [ 2.936] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event9)
    [ 2.936] (II) No input driver specified, ignoring this device.
    [ 2.936] (II) This device may have been added with another device file.
    [ 2.936] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event12)
    [ 2.936] (II) No input driver specified, ignoring this device.
    [ 2.936] (II) This device may have been added with another device file.
    [ 2.936] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event5)
    [ 2.936] (II) No input driver specified, ignoring this device.
    [ 2.936] (II) This device may have been added with another device file.
    [ 2.936] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event6)
    [ 2.936] (II) No input driver specified, ignoring this device.
    [ 2.936] (II) This device may have been added with another device file.
    [ 2.936] (II) config/udev: Adding input device LOGITECH G110 G-keys (/dev/input/event4)
    [ 2.936] (**) LOGITECH G110 G-keys: Applying InputClass "evdev keyboard catchall"
    [ 2.936] (**) LOGITECH G110 G-keys: Applying InputClass "libinput keyboard catchall"
    [ 2.936] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 19 paused 0
    [ 2.936] (II) Using input driver 'libinput' for 'LOGITECH G110 G-keys'
    [ 2.936] (**) LOGITECH G110 G-keys: always reports core events
    [ 2.936] (**) Option "Device" "/dev/input/event4"
    [ 2.937] (II) input device 'LOGITECH G110 G-keys', /dev/input/event4 is tagged by udev as: Keyboard
    [ 2.937] (II) input device 'LOGITECH G110 G-keys', /dev/input/event4 is a keyboard
    [ 2.937] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11.1/3-11.1:1.0/0003:046D:C22B.0001/input/input7/event4"
    [ 2.937] (II) XINPUT: Adding extended input device "LOGITECH G110 G-keys" (type: KEYBOARD, id 9)
    [ 2.937] (II) input device 'LOGITECH G110 G-keys', /dev/input/event4 is tagged by udev as: Keyboard
    [ 2.937] (II) input device 'LOGITECH G110 G-keys', /dev/input/event4 is a keyboard
    [ 2.937] (II) config/udev: Adding input device Gaming Keyboard G110 (/dev/input/event10)
    [ 2.937] (**) Gaming Keyboard G110: Applying InputClass "evdev keyboard catchall"
    [ 2.937] (**) Gaming Keyboard G110: Applying InputClass "libinput keyboard catchall"
    [ 2.937] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 20 paused 0
    [ 2.937] (II) Using input driver 'libinput' for 'Gaming Keyboard G110'
    [ 2.937] (**) Gaming Keyboard G110: always reports core events
    [ 2.937] (**) Option "Device" "/dev/input/event10"
    [ 2.937] (II) input device 'Gaming Keyboard G110', /dev/input/event10 is tagged by udev as: Keyboard
    [ 2.937] (II) input device 'Gaming Keyboard G110', /dev/input/event10 is a keyboard
    [ 2.937] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11.3/3-11.3:1.0/0003:046D:C22A.0002/input/input22/event10"
    [ 2.937] (II) XINPUT: Adding extended input device "Gaming Keyboard G110" (type: KEYBOARD, id 10)
    [ 2.938] (II) input device 'Gaming Keyboard G110', /dev/input/event10 is tagged by udev as: Keyboard
    [ 2.938] (II) input device 'Gaming Keyboard G110', /dev/input/event10 is a keyboard
    [ 2.938] (II) config/udev: Adding input device Gaming Keyboard G110 (/dev/input/event20)
    [ 2.938] (**) Gaming Keyboard G110: Applying InputClass "evdev keyboard catchall"
    [ 2.938] (**) Gaming Keyboard G110: Applying InputClass "libinput keyboard catchall"
    [ 2.938] (II) systemd-logind: got fd for /dev/input/event20 13:84 fd 21 paused 0
    [ 2.938] (II) Using input driver 'libinput' for 'Gaming Keyboard G110'
    [ 2.938] (**) Gaming Keyboard G110: always reports core events
    [ 2.938] (**) Option "Device" "/dev/input/event20"
    [ 2.938] (II) input device 'Gaming Keyboard G110', /dev/input/event20 is tagged by udev as: Keyboard
    [ 2.938] (II) input device 'Gaming Keyboard G110', /dev/input/event20 is a keyboard
    [ 2.938] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11.3/3-11.3:1.1/0003:046D:C22A.0003/input/input23/event20"
    [ 2.938] (II) XINPUT: Adding extended input device "Gaming Keyboard G110" (type: KEYBOARD, id 11)
    [ 2.938] (II) input device 'Gaming Keyboard G110', /dev/input/event20 is tagged by udev as: Keyboard
    [ 2.938] (II) input device 'Gaming Keyboard G110', /dev/input/event20 is a keyboard
    [ 2.939] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event21)
    [ 2.939] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
    [ 2.939] (**) Logitech USB Receiver: Applying InputClass "libinput pointer catchall"
    [ 2.990] (II) systemd-logind: got fd for /dev/input/event21 13:85 fd 22 paused 0
    [ 2.990] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
    [ 2.990] (**) Logitech USB Receiver: always reports core events
    [ 2.990] (**) Option "Device" "/dev/input/event21"
    [ 2.990] (II) input device 'Logitech USB Receiver', /dev/input/event21 is tagged by udev as: Mouse
    [ 2.990] (II) input device 'Logitech USB Receiver', /dev/input/event21 is a pointer caps
    [ 2.990] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11.4/3-11.4:1.0/0003:046D:C52F.0004/input/input24/event21"
    [ 2.990] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 12)
    [ 2.990] (**) Option "AccelerationScheme" "none"
    [ 2.990] (**) Logitech USB Receiver: (accel) selected scheme none/0
    [ 2.990] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 2.990] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 2.990] (II) input device 'Logitech USB Receiver', /dev/input/event21 is tagged by udev as: Mouse
    [ 2.990] (II) input device 'Logitech USB Receiver', /dev/input/event21 is a pointer caps
    [ 2.990] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
    [ 2.990] (II) No input driver specified, ignoring this device.
    [ 2.990] (II) This device may have been added with another device file.
    [ 2.990] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event22)
    [ 2.990] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
    [ 2.990] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
    [ 2.991] (II) systemd-logind: got fd for /dev/input/event22 13:86 fd 23 paused 0
    [ 2.991] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
    [ 2.991] (**) Logitech USB Receiver: always reports core events
    [ 2.991] (**) Option "Device" "/dev/input/event22"
    [ 2.991] (II) input device 'Logitech USB Receiver', /dev/input/event22 is tagged by udev as: Keyboard
    [ 2.991] (II) input device 'Logitech USB Receiver', /dev/input/event22 is a keyboard
    [ 2.991] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11.4/3-11.4:1.1/0003:046D:C52F.0005/input/input25/event22"
    [ 2.991] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 13)
    [ 2.991] (**) Option "AccelerationScheme" "none"
    [ 2.991] (**) Logitech USB Receiver: (accel) selected scheme none/0
    [ 2.991] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 2.991] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 2.991] (II) input device 'Logitech USB Receiver', /dev/input/event22 is tagged by udev as: Keyboard
    [ 2.991] (II) input device 'Logitech USB Receiver', /dev/input/event22 is a keyboard
    [ 2.991] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
    [ 2.991] (II) No input driver specified, ignoring this device.
    [ 2.991] (II) This device may have been added with another device file.
    [ 2.992] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event13)
    [ 2.992] (II) No input driver specified, ignoring this device.
    [ 2.992] (II) This device may have been added with another device file.
    [ 2.992] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event14)
    [ 2.992] (II) No input driver specified, ignoring this device.
    [ 2.992] (II) This device may have been added with another device file.
    [ 2.992] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event15)
    [ 2.992] (II) No input driver specified, ignoring this device.
    [ 2.992] (II) This device may have been added with another device file.
    [ 2.992] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event16)
    [ 2.992] (II) No input driver specified, ignoring this device.
    [ 2.992] (II) This device may have been added with another device file.
    [ 2.992] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event17)
    [ 2.992] (II) No input driver specified, ignoring this device.
    [ 2.992] (II) This device may have been added with another device file.
    [ 2.992] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event18)
    [ 2.992] (II) No input driver specified, ignoring this device.
    [ 2.992] (II) This device may have been added with another device file.
    [ 2.992] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event19)
    [ 2.992] (II) No input driver specified, ignoring this device.
    [ 2.992] (II) This device may have been added with another device file.
    [ 2.992] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
    [ 2.992] (II) No input driver specified, ignoring this device.
    [ 2.992] (II) This device may have been added with another device file.
    [ 2.993] (EE) FBDEV(0): FBIOBLANK: Invalid argument
    Output of lshw -c video:
    *-display
    description: VGA compatible controller
    product: Curacao PRO [Radeon R9 270]
    vendor: Advanced Micro Devices, Inc. [AMD/ATI]
    physical id: 0
    bus info: pci@0000:01:00.0
    version: 00
    width: 64 bits
    clock: 33MHz
    capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
    configuration: driver=radeon latency=0
    resources: irq:29 memory:d0000000-dfffffff memory:efe00000-efe3ffff ioport:e000(size=256) memory:efe40000-efe5ffff
    And the output of systemctl status gdm:
    ● gdm.service - GNOME Display Manager
    Loaded: loaded (/usr/lib/systemd/system/gdm.service; enabled; vendor preset: disabled)
    Active: active (running) since Wed 2015-04-29 03:30:42 AEST; 15min ago
    Main PID: 289 (gdm)
    CGroup: /system.slice/gdm.service
    └─289 /usr/bin/gdm
    Apr 29 03:30:42 spitfire systemd[1]: Starting GNOME Display Manager...
    Apr 29 03:30:42 spitfire systemd[1]: Started GNOME Display Manager.
    Apr 29 03:30:45 spitfire gdm[289]: GdmDisplay: display lasted 2.980133 seconds
    Apr 29 03:30:45 spitfire gdm[289]: Child process -311 was already dead.
    Apr 29 03:30:45 spitfire gdm[289]: Child process 303 was already dead.
    Apr 29 03:30:45 spitfire gdm[289]: Unable to kill session worker process
    Apr 29 03:30:45 spitfire gdm[289]: Child process 303 was already dead.
    Apr 29 03:30:45 spitfire gdm[289]: Unable to kill session worker process
    I don't know where the GDM logs are located, as the /var/log/gdm folder is empty. Newbie problems.
    If there are other logs that would help, please tell me and I'll add them. Thanks.
    Last edited by The6P4C (2015-04-28 09:53:14)

    The first is the audio codec, which is WM Std at 44.1kHz. WVP2 is the video codec and I have not heard of it. Nor seen it playback in QT assisted by Flip4mac so it may be unplayable.
    There are always listed one audio codec and one video codec in that box assuming there are audio and video in the clip, e.g. AAC 256 bit (audio) and H264 Simple Profile (video) in an iPod clip.
    Ooh bad news, from another source:
    +"It seems that the Flip4Mac WMV Player, which should provide the missing Windows Media support for Mac users (as endorsed by Microsoft) does not support all Windows Media codecs, namely *it refuses to play content encoded with the Windows Media Video 9 Image v2 (WVP2) codec.* "+

  • USB2 doesn't work. Only USB3 work.

    Hello,
    I've a new DELL vostro 3350 with 2 usb2 and one usb3/e-sata connector but only the last seem working, the other 2 port doesn't work like they doesn't exist.
    i post my dmesg and lsmod output
    dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 2.6.39-ARCH (tobias@T-POWA-LX) (gcc version 4.6.0 20110603 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jun 6 22:37:55 CEST 2011
    [ 0.000000] Command line: root=/dev/sda3 ro i915.modeset=1
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
    [ 0.000000] BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
    [ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
    [ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
    [ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
    [ 0.000000] BIOS-e820: 0000000040200000 - 00000000ca4e4000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca4e4000 - 00000000ca527000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000ca527000 - 00000000ca793000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca793000 - 00000000ca967000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca967000 - 00000000caba7000 (usable)
    [ 0.000000] BIOS-e820: 00000000caba7000 - 00000000cad68000 (reserved)
    [ 0.000000] BIOS-e820: 00000000cad68000 - 00000000cafad000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000cafad000 - 00000000cafbb000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000cafbb000 - 00000000cafe8000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000cafe8000 - 00000000cb000000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000cb800000 - 00000000cfa00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 000000012fe00000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.6 present.
    [ 0.000000] DMI: Dell Inc. Vostro 3350/0M516T, BIOS A03 03/31/2011
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x12fe00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F00000000 write-back
    [ 0.000000] 1 base 100000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0CB800000 mask FFF800000 uncachable
    [ 0.000000] 3 base 0CC000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
    [ 0.000000] 5 base 0E0000000 mask FE0000000 uncachable
    [ 0.000000] 6 base 12FE00000 mask FFFE00000 uncachable
    [ 0.000000] 7 base 130000000 mask FF0000000 uncachable
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820 update range: 00000000cb800000 - 0000000100000000 (usable) ==> (reserved)
    [ 0.000000] last_pfn = 0xcaba7 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000fd220] fd220
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000caba7000
    [ 0.000000] 0000000000 - 00caa00000 page 2M
    [ 0.000000] 00caa00000 - 00caba7000 page 4k
    [ 0.000000] kernel direct mapping tables up to caba7000 @ caba1000-caba7000
    [ 0.000000] init_memory_mapping: 0000000100000000-000000012fe00000
    [ 0.000000] 0100000000 - 012fe00000 page 2M
    [ 0.000000] kernel direct mapping tables up to 12fe00000 @ 12fdfa000-12fe00000
    [ 0.000000] RAMDISK: 1fdd9000 - 1fff0000
    [ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 DELL)
    [ 0.000000] ACPI: XSDT 00000000cafad080 0007C (v01 DELL WN09 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 00000000cafb6cb8 000F4 (v04 DELL WN09 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 00000000cafad188 09B2D (v02 DELL WN09 00000000 INTL 20051117)
    [ 0.000000] ACPI: FACS 00000000cafe3f80 00040
    [ 0.000000] ACPI: APIC 00000000cafb6db0 00072 (v03 DELL WN09 01072009 AMI 00010013)
    [ 0.000000] ACPI: MCFG 00000000cafb6e28 0003C (v01 DELL WN09 01072009 MSFT 00000097)
    [ 0.000000] ACPI: SSDT 00000000cafb6e68 004B0 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
    [ 0.000000] ACPI: SLIC 00000000cafb7318 00176 (v01 DELL WN09 01072009 AMI 00010013)
    [ 0.000000] ACPI: HPET 00000000cafb7490 00038 (v01 DELL WN09 01072009 AMI. 00000004)
    [ 0.000000] ACPI: SSDT 00000000cafb74c8 00780 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 00000000cafb7c48 00996 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 00000000cafb85e0 00D80 (v01 SgRef SgTabl 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000cafb9360 00DEC (v01 AmdRef AmdTabl 00001000 INTL 20091112)
    [ 0.000000] ACPI: OSFR 00000000cafba150 00086 (v01 DELL M08 07DB031F ASL 00000061)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-000000012fe00000
    [ 0.000000] NUMA: Using 63 for the hash shift.
    [ 0.000000] Initmem setup node 0 0000000000000000-000000012fe00000
    [ 0.000000] NODE_DATA [000000012fdfb000 - 000000012fdfffff]
    [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012b400000-ffff88012edfffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x0012fe00
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[7] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009d
    [ 0.000000] 0: 0x00000100 -> 0x00020000
    [ 0.000000] 0: 0x00020200 -> 0x00040000
    [ 0.000000] 0: 0x00040200 -> 0x000ca4e4
    [ 0.000000] 0: 0x000ca527 -> 0x000ca793
    [ 0.000000] 0: 0x000ca967 -> 0x000caba7
    [ 0.000000] 0: 0x00100000 -> 0x0012fe00
    [ 0.000000] On node 0 totalpages: 1024797
    [ 0.000000] DMA zone: 56 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3920 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 14280 pages used for memmap
    [ 0.000000] DMA32 zone: 810440 pages, LIFO batch:31
    [ 0.000000] Normal zone: 2681 pages used for memmap
    [ 0.000000] Normal zone: 193415 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
    [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
    [ 0.000000] PM: Registered nosave memory: 00000000ca4e4000 - 00000000ca527000
    [ 0.000000] PM: Registered nosave memory: 00000000ca793000 - 00000000ca967000
    [ 0.000000] PM: Registered nosave memory: 00000000caba7000 - 00000000cad68000
    [ 0.000000] PM: Registered nosave memory: 00000000cad68000 - 00000000cafad000
    [ 0.000000] PM: Registered nosave memory: 00000000cafad000 - 00000000cafbb000
    [ 0.000000] PM: Registered nosave memory: 00000000cafbb000 - 00000000cafe8000
    [ 0.000000] PM: Registered nosave memory: 00000000cafe8000 - 00000000cb000000
    [ 0.000000] PM: Registered nosave memory: 00000000cb000000 - 00000000cb800000
    [ 0.000000] PM: Registered nosave memory: 00000000cb800000 - 00000000cfa00000
    [ 0.000000] PM: Registered nosave memory: 00000000cfa00000 - 00000000f8000000
    [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
    [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
    [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
    [ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
    [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at cfa00000 (gap: cfa00000:28600000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012fa00000 s83136 r8192 d23360 u524288
    [ 0.000000] pcpu-alloc: s83136 r8192 d23360 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1007775
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: root=/dev/sda3 ro i915.modeset=1
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3961444k/4978688k available (4022k kernel code, 879500k absent, 137744k reserved, 3332k data, 724k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptable hierarchical RCU implementation.
    [ 0.000000] RCU-based detection of stalled CPUs is disabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:2304
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.003333] Detected 2294.660 MHz processor.
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4591.54 BogoMIPS (lpj=7648866)
    [ 0.000127] pid_max: default: 32768 minimum: 301
    [ 0.000293] Security Framework initialized
    [ 0.000355] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000789] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.001939] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.002450] Mount-cache hash table entries: 256
    [ 0.002819] Initializing cgroup subsys ns
    [ 0.002880] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
    [ 0.002961] Initializing cgroup subsys cpuacct
    [ 0.003045] Initializing cgroup subsys memory
    [ 0.003117] Initializing cgroup subsys devices
    [ 0.003176] Initializing cgroup subsys freezer
    [ 0.003236] Initializing cgroup subsys net_cls
    [ 0.003296] Initializing cgroup subsys blkio
    [ 0.003400] CPU: Physical Processor ID: 0
    [ 0.003459] CPU: Processor Core ID: 0
    [ 0.003519] mce: CPU supports 7 MCE banks
    [ 0.003589] CPU0: Thermal monitoring enabled (TM1)
    [ 0.003657] using mwait in idle threads.
    [ 0.004857] ACPI: Core revision 20110316
    [ 0.024638] ftrace: allocating 15966 entries in 63 pages
    [ 0.031279] Setting APIC routing to flat
    [ 0.031683] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.064728] CPU0: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz stepping 07
    [ 0.171080] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
    [ 0.171280] ... version: 3
    [ 0.171338] ... bit width: 48
    [ 0.171396] ... generic registers: 4
    [ 0.171455] ... value mask: 0000ffffffffffff
    [ 0.172009] ... max period: 000000007fffffff
    [ 0.172070] ... fixed-purpose events: 3
    [ 0.172129] ... event mask: 000000070000000f
    [ 0.191201] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.217746] Booting Node 0, Processors #1
    [ 0.217864] smpboot cpu 1: start_ip = 98000
    [ 0.331068] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.351025] #2
    [ 0.351082] smpboot cpu 2: start_ip = 98000
    [ 0.464414] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.484280] #3 Ok.
    [ 0.484367] smpboot cpu 3: start_ip = 98000
    [ 0.597618] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.604180] Brought up 4 CPUs
    [ 0.604263] Total of 4 processors activated (18364.30 BogoMIPS).
    [ 0.606823] devtmpfs: initialized
    [ 0.607640] PM: Registering ACPI NVS region at ca4e4000 (274432 bytes)
    [ 0.607709] PM: Registering ACPI NVS region at cad68000 (2379776 bytes)
    [ 0.607806] PM: Registering ACPI NVS region at cafbb000 (184320 bytes)
    [ 0.608599] print_constraints: dummy:
    [ 0.608720] NET: Registered protocol family 16
    [ 0.608864] ACPI: bus type pci registered
    [ 0.609044] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.609125] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.625218] PCI: Using configuration type 1 for base access
    [ 0.625687] bio: create slab <bio-0> at 0
    [ 0.627372] ACPI: EC: Look up EC in DSDT
    [ 0.628909] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.633287] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.648342] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.648773] ACPI: SSDT 00000000cad51698 0064F (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.649322] ACPI: Dynamic OEM Table Load:
    [ 0.649460] ACPI: SSDT (null) 0064F (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.664427] ACPI: SSDT 00000000cad52a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.665002] ACPI: Dynamic OEM Table Load:
    [ 0.665142] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.674299] ACPI: SSDT 00000000cad50d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.674841] ACPI: Dynamic OEM Table Load:
    [ 0.674979] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.684679] ACPI: Interpreter enabled
    [ 0.684739] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.685017] ACPI: Using IOAPIC for interrupt routing
    [ 0.724350] ACPI: No dock devices found.
    [ 0.724410] HEST: Table not found.
    [ 0.724469] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.724811] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.725249] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.725314] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.725377] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.725455] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    [ 0.725531] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    [ 0.725607] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    [ 0.725684] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
    [ 0.725761] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
    [ 0.725838] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
    [ 0.725915] pci_root PNP0A08:00: host bridge window [mem 0xcfa00000-0xfeafffff]
    [ 0.725991] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
    [ 0.726076] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
    [ 0.726109] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
    [ 0.726133] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.726135] pci 0000:00:01.0: PME# disabled
    [ 0.726153] pci 0000:00:02.0: [8086:0116] type 0 class 0x000300
    [ 0.726163] pci 0000:00:02.0: reg 10: [mem 0xf6400000-0xf67fffff 64bit]
    [ 0.726169] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.726174] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
    [ 0.726223] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
    [ 0.726248] pci 0000:00:16.0: reg 10: [mem 0xf7c0a000-0xf7c0a00f 64bit]
    [ 0.726310] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.726314] pci 0000:00:16.0: PME# disabled
    [ 0.726348] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
    [ 0.726369] pci 0000:00:1a.0: reg 10: [mem 0xf7c08000-0xf7c083ff]
    [ 0.726443] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.726447] pci 0000:00:1a.0: PME# disabled
    [ 0.726472] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
    [ 0.726487] pci 0000:00:1b.0: reg 10: [mem 0xf7c00000-0xf7c03fff 64bit]
    [ 0.726542] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.726546] pci 0000:00:1b.0: PME# disabled
    [ 0.726567] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
    [ 0.726630] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.726634] pci 0000:00:1c.0: PME# disabled
    [ 0.726657] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
    [ 0.726720] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.726724] pci 0000:00:1c.1: PME# disabled
    [ 0.726748] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
    [ 0.726810] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.726814] pci 0000:00:1c.3: PME# disabled
    [ 0.726837] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
    [ 0.726899] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.726904] pci 0000:00:1c.4: PME# disabled
    [ 0.726928] pci 0000:00:1c.7: [8086:1c1e] type 1 class 0x000604
    [ 0.726990] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
    [ 0.726994] pci 0000:00:1c.7: PME# disabled
    [ 0.727021] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
    [ 0.727043] pci 0000:00:1d.0: reg 10: [mem 0xf7c07000-0xf7c073ff]
    [ 0.727116] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.727120] pci 0000:00:1d.0: PME# disabled
    [ 0.727146] pci 0000:00:1f.0: [8086:1c4b] type 0 class 0x000601
    [ 0.727261] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
    [ 0.727280] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
    [ 0.727288] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
    [ 0.727297] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
    [ 0.727305] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
    [ 0.727313] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
    [ 0.727322] pci 0000:00:1f.2: reg 24: [mem 0xf7c06000-0xf7c067ff]
    [ 0.727355] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.727359] pci 0000:00:1f.2: PME# disabled
    [ 0.727377] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
    [ 0.727394] pci 0000:00:1f.3: reg 10: [mem 0xf7c05000-0xf7c050ff 64bit]
    [ 0.727416] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
    [ 0.727477] pci 0000:01:00.0: [1002:6760] type 0 class 0x000300
    [ 0.727489] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.727499] pci 0000:01:00.0: reg 18: [mem 0xf7b20000-0xf7b3ffff 64bit]
    [ 0.727506] pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff]
    [ 0.727518] pci 0000:01:00.0: reg 30: [mem 0xf7b00000-0xf7b1ffff pref]
    [ 0.727534] pci 0000:01:00.0: supports D1 D2
    [ 0.734119] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.734209] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.734225] pci 0000:00:01.0: bridge window [mem 0xf7b00000-0xf7bfffff]
    [ 0.734228] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.734275] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
    [ 0.734338] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.734343] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 0.734350] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.734416] pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
    [ 0.734436] pci 0000:05:00.0: reg 10: [io 0xd000-0xd0ff]
    [ 0.734471] pci 0000:05:00.0: reg 18: [mem 0xf1104000-0xf1104fff 64bit pref]
    [ 0.734493] pci 0000:05:00.0: reg 20: [mem 0xf1100000-0xf1103fff 64bit pref]
    [ 0.734554] pci 0000:05:00.0: supports D1 D2
    [ 0.734556] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.734562] pci 0000:05:00.0: PME# disabled
    [ 0.740790] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
    [ 0.740889] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
    [ 0.740894] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 0.740900] pci 0000:00:1c.1: bridge window [mem 0xf1100000-0xf11fffff 64bit pref]
    [ 0.740969] pci 0000:09:00.0: [168c:002b] type 0 class 0x000280
    [ 0.740996] pci 0000:09:00.0: reg 10: [mem 0xf7a00000-0xf7a0ffff 64bit]
    [ 0.741100] pci 0000:09:00.0: supports D1
    [ 0.741102] pci 0000:09:00.0: PME# supported from D0 D1 D3hot
    [ 0.741107] pci 0000:09:00.0: PME# disabled
    [ 0.747449] pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
    [ 0.747550] pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.747555] pci 0000:00:1c.3: bridge window [mem 0xf7a00000-0xf7afffff]
    [ 0.747561] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.747631] pci 0000:0b:00.0: [1033:0194] type 0 class 0x000c03
    [ 0.747658] pci 0000:0b:00.0: reg 10: [mem 0xf7900000-0xf7901fff 64bit]
    [ 0.747765] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
    [ 0.747771] pci 0000:0b:00.0: PME# disabled
    [ 0.754114] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
    [ 0.754215] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.754219] pci 0000:00:1c.4: bridge window [mem 0xf7900000-0xf79fffff]
    [ 0.754226] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.754273] pci 0000:00:1c.7: PCI bridge to [bus 11-1f]
    [ 0.754334] pci 0000:00:1c.7: bridge window [io 0xb000-0xcfff]
    [ 0.754338] pci 0000:00:1c.7: bridge window [mem 0xf6800000-0xf78fffff]
    [ 0.754345] pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
    [ 0.754373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.754485] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.754515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 0.754544] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    [ 0.754572] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
    [ 0.754603] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
    [ 0.754630] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
    [ 0.754745] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.754970] pci0000:00: ACPI _OSC control (0x19) granted
    [ 0.758671] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.759208] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15)
    [ 0.759739] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
    [ 0.760272] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 0.760810] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.761438] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.762065] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
    [ 0.762595] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15)
    [ 0.763156] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.763241] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    [ 0.763320] vgaarb: loaded
    [ 0.763439] PCI: Using ACPI for IRQ routing
    [ 0.763498] PCI: pci_cache_line_size set to 64 bytes
    [ 0.763581] reserve RAM buffer: 000000000009d400 - 000000000009ffff
    [ 0.763583] reserve RAM buffer: 00000000ca4e4000 - 00000000cbffffff
    [ 0.763586] reserve RAM buffer: 00000000ca793000 - 00000000cbffffff
    [ 0.763588] reserve RAM buffer: 00000000caba7000 - 00000000cbffffff
    [ 0.763591] reserve RAM buffer: 000000012fe00000 - 000000012fffffff
    [ 0.763684] NetLabel: Initializing
    [ 0.763742] NetLabel: domain hash size = 128
    [ 0.763801] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.763872] NetLabel: unlabeled traffic allowed by default
    [ 0.763950] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.764373] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.766445] Switching to clocksource hpet
    [ 0.767420] Switched to NOHz mode on CPU #0
    [ 0.767480] Switched to NOHz mode on CPU #1
    [ 0.767515] Switched to NOHz mode on CPU #3
    [ 0.767570] Switched to NOHz mode on CPU #2
    [ 0.771493] pnp: PnP ACPI init
    [ 0.771565] ACPI: bus type pnp registered
    [ 0.771848] pnp 00:00: [bus 00-3e]
    [ 0.771850] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.771852] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.771854] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.771856] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.771857] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 0.771859] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 0.771861] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 0.771862] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 0.771864] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 0.771866] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 0.771867] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 0.771869] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 0.771871] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 0.771872] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 0.771874] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 0.771876] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 0.771877] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 0.771879] pnp 00:00: [mem 0xcfa00000-0xfeafffff window]
    [ 0.771881] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
    [ 0.771949] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.771960] pnp 00:01: [io 0x0000-0x001f]
    [ 0.771964] pnp 00:01: [io 0x0081-0x0091]
    [ 0.771965] pnp 00:01: [io 0x0093-0x009f]
    [ 0.771966] pnp 00:01: [io 0x00c0-0x00df]
    [ 0.771968] pnp 00:01: [dma 4]
    [ 0.771988] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.771995] pnp 00:02: [mem 0xff000000-0xffffffff]
    [ 0.772013] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.772081] pnp 00:03: [mem 0xfed00000-0xfed003ff]
    [ 0.772101] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.772112] pnp 00:04: [io 0x002e-0x002f]
    [ 0.772113] pnp 00:04: [io 0x004e-0x004f]
    [ 0.772114] pnp 00:04: [io 0x0061]
    [ 0.772116] pnp 00:04: [io 0x0063]
    [ 0.772117] pnp 00:04: [io 0x0065]
    [ 0.772118] pnp 00:04: [io 0x0067]
    [ 0.772120] pnp 00:04: [io 0x0070]
    [ 0.772121] pnp 00:04: [io 0x0080]
    [ 0.772122] pnp 00:04: [io 0x0092]
    [ 0.772124] pnp 00:04: [io 0x00b2-0x00b3]
    [ 0.772125] pnp 00:04: [io 0x0680-0x069f]
    [ 0.772126] pnp 00:04: [io 0x1000-0x100f]
    [ 0.772128] pnp 00:04: [io 0xffff]
    [ 0.772129] pnp 00:04: [io 0xffff]
    [ 0.772130] pnp 00:04: [io 0x0400-0x0453]
    [ 0.772132] pnp 00:04: [io 0x0458-0x047f]
    [ 0.772133] pnp 00:04: [io 0x0500-0x057f]
    [ 0.772135] pnp 00:04: [io 0x164e-0x164f]
    [ 0.772177] system 00:04: [io 0x0680-0x069f] has been reserved
    [ 0.772240] system 00:04: [io 0x1000-0x100f] has been reserved
    [ 0.772302] system 00:04: [io 0xffff] has been reserved
    [ 0.772363] system 00:04: [io 0xffff] has been reserved
    [ 0.772425] system 00:04: [io 0x0400-0x0453] has been reserved
    [ 0.772487] system 00:04: [io 0x0458-0x047f] has been reserved
    [ 0.772550] system 00:04: [io 0x0500-0x057f] has been reserved
    [ 0.772613] system 00:04: [io 0x164e-0x164f] has been reserved
    [ 0.772676] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.772685] pnp 00:05: [io 0x0070-0x0077]
    [ 0.772694] pnp 00:05: [irq 8]
    [ 0.772711] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.772733] pnp 00:06: [io 0x0454-0x0457]
    [ 0.772764] system 00:06: [io 0x0454-0x0457] has been reserved
    [ 0.772827] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.772834] pnp 00:07: [io 0x00f0-0x00ff]
    [ 0.772839] pnp 00:07: [irq 13]
    [ 0.772857] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.772870] pnp 00:08: [io 0x0010-0x001f]
    [ 0.772871] pnp 00:08: [io 0x0022-0x003f]
    [ 0.772873] pnp 00:08: [io 0x0044-0x005f]
    [ 0.772874] pnp 00:08: [io 0x0068-0x006f]
    [ 0.772875] pnp 00:08: [io 0x0072-0x007f]
    [ 0.772877] pnp 00:08: [io 0x0080]
    [ 0.772878] pnp 00:08: [io 0x0084-0x0086]
    [ 0.772880] pnp 00:08: [io 0x0088]
    [ 0.772881] pnp 00:08: [io 0x008c-0x008e]
    [ 0.772882] pnp 00:08: [io 0x0090-0x009f]
    [ 0.772884] pnp 00:08: [io 0x00a2-0x00bf]
    [ 0.772885] pnp 00:08: [io 0x00e0-0x00ef]
    [ 0.772886] pnp 00:08: [io 0x04d0-0x04d1]
    [ 0.772888] pnp 00:08: [mem 0xfe800000-0xfe802fff]
    [ 0.772924] system 00:08: [io 0x04d0-0x04d1] has been reserved
    [ 0.772988] system 00:08: [mem 0xfe800000-0xfe802fff] has been reserved
    [ 0.773052] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.773068] pnp 00:09: [irq 12]
    [ 0.773089] pnp 00:09: Plug and Play ACPI device, IDs DLL04b2 SYN0600 SYN0002 PNP0f13 (active)
    [ 0.773101] pnp 00:0a: [io 0x0060]
    [ 0.773102] pnp 00:0a: [io 0x0064]
    [ 0.773103] pnp 00:0a: [io 0x0062]
    [ 0.773105] pnp 00:0a: [io 0x0066]
    [ 0.773109] pnp 00:0a: [irq 1]
    [ 0.773128] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.773371] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
    [ 0.773373] pnp 00:0b: [mem 0xfed10000-0xfed17fff]
    [ 0.773374] pnp 00:0b: [mem 0xfed18000-0xfed18fff]
    [ 0.773376] pnp 00:0b: [mem 0xfed19000-0xfed19fff]
    [ 0.773377] pnp 00:0b: [mem 0xf8000000-0xfbffffff]
    [ 0.773379] pnp 00:0b: [mem 0xfed20000-0xfed3ffff]
    [ 0.773380] pnp 00:0b: [mem 0xfed90000-0xfed93fff]
    [ 0.773382] pnp 00:0b: [mem 0xfed45000-0xfed8ffff]
    [ 0.773383] pnp 00:0b: [mem 0xff000000-0xffffffff]
    [ 0.773385] pnp 00:0b: [mem 0xfee00000-0xfeefffff]
    [ 0.773386] pnp 00:0b: [mem 0xcfa00000-0xcfa00fff]
    [ 0.773435] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.773500] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.773564] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.773628] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.773692] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.773756] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.773820] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.773884] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.773947] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.774011] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.774076] system 00:0b: [mem 0xcfa00000-0xcfa00fff] has been reserved
    [ 0.774140] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.774195] pnp 00:0c: [irq 20]
    [ 0.774232] pnp 00:0c: Plug and Play ACPI device, IDs SMO8800 (active)
    [ 0.774325] pnp 00:0d: [mem 0x20000000-0x201fffff]
    [ 0.774327] pnp 00:0d: [mem 0x40000000-0x401fffff]
    [ 0.774375] system 00:0d: [mem 0x20000000-0x201fffff] has been reserved
    [ 0.774440] system 00:0d: [mem 0x40000000-0x401fffff] has been reserved
    [ 0.774504] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.774546] pnp: PnP ACPI: found 14 devices
    [ 0.774604] ACPI: ACPI bus type pnp unregistered
    [ 0.780392] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.780455] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.780519] pci 0000:00:01.0: bridge window [mem 0xf7b00000-0xf7bfffff]
    [ 0.780584] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.780663] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
    [ 0.780724] pci 0000:00:1c.0: bridge window [io disabled]
    [ 0.780790] pci 0000:00:1c.0: bridge window [mem disabled]
    [ 0.780854] pci 0000:00:1c.0: bridge window [mem pref disabled]
    [ 0.780921] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
    [ 0.780983] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
    [ 0.781049] pci 0000:00:1c.1: bridge window [mem disabled]
    [ 0.781112] pci 0000:00:1c.1: bridge window [mem 0xf1100000-0xf11fffff 64bit pref]
    [ 0.781193] pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
    [ 0.781254] pci 0000:00:1c.3: bridge window [io disabled]
    [ 0.781318] pci 0000:00:1c.3: bridge window [mem 0xf7a00000-0xf7afffff]
    [ 0.781383] pci 0000:00:1c.3: bridge window [mem pref disabled]
    [ 0.781450] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
    [ 0.781511] pci 0000:00:1c.4: bridge window [io disabled]
    [ 0.781575] pci 0000:00:1c.4: bridge window [mem 0xf7900000-0xf79fffff]
    [ 0.781641] pci 0000:00:1c.4: bridge window [mem pref disabled]
    [ 0.781707] pci 0000:00:1c.7: PCI bridge to [bus 11-1f]
    [ 0.781770] pci 0000:00:1c.7: bridge window [io 0xb000-0xcfff]
    [ 0.781836] pci 0000:00:1c.7: bridge window [mem 0xf6800000-0xf78fffff]
    [ 0.781902] pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
    [ 0.781990] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.782056] pci 0000:00:01.0: setting latency timer to 64
    [ 0.782062] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.782129] pci 0000:00:1c.0: setting latency timer to 64
    [ 0.782138] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 0.782205] pci 0000:00:1c.1: setting latency timer to 64
    [ 0.782213] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [ 0.782280] pci 0000:00:1c.3: setting latency timer to 64
    [ 0.782287] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.782353] pci 0000:00:1c.4: setting latency timer to 64
    [ 0.782360] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [ 0.782427] pci 0000:00:1c.7: setting latency timer to 64
    [ 0.782431] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.782433] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.782435] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.782437] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 0.782438] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 0.782440] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 0.782442] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 0.782444] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
    [ 0.782446] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
    [ 0.782447] pci_bus 0000:00: resource 13 [mem 0xcfa00000-0xfeafffff]
    [ 0.782449] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff]
    [ 0.782451] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 0.782453] pci_bus 0000:01: resource 1 [mem 0xf7b00000-0xf7bfffff]
    [ 0.782455] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.782457] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
    [ 0.782459] pci_bus 0000:05: resource 2 [mem 0xf1100000-0xf11fffff 64bit pref]
    [ 0.782461] pci_bus 0000:09: resource 1 [mem 0xf7a00000-0xf7afffff]
    [ 0.782463] pci_bus 0000:0b: resource 1 [mem 0xf7900000-0xf79fffff]
    [ 0.782464] pci_bus 0000:11: resource 0 [io 0xb000-0xcfff]
    [ 0.782466] pci_bus 0000:11: resource 1 [mem 0xf6800000-0xf78fffff]
    [ 0.782468] pci_bus 0000:11: resource 2 [mem 0xf0000000-0xf10fffff 64bit pref]
    [ 0.782519] NET: Registered protocol family 2
    [ 0.782742] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.783721] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.785537] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.785819] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.785882] TCP reno registered
    [ 0.785948] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.786030] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.786293] NET: Registered protocol family 1
    [ 0.786364] pci 0000:00:02.0: Boot video device
    [ 1.026530] PCI: CLS 64 bytes, default 64
    [ 1.026583] Unpacking initramfs...
    [ 1.052516] Freeing initrd memory: 2140k freed
    [ 1.052823] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.053405] Placing 64MB software IO TLB between ffff8800c64e4000 - ffff8800ca4e4000
    [ 1.053483] software IO TLB at phys 0xc64e4000 - 0xca4e4000
    [ 1.053931] audit: initializing netlink socket (disabled)
    [ 1.054000] type=2000 audit(1308651601.879:1): initialized
    [ 1.054346] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.056030] VFS: Disk quotas dquot_6.5.2
    [ 1.056196] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.056389] msgmni has been set to 7741
    [ 1.056635] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 1.056739] io scheduler noop registered
    [ 1.056797] io scheduler deadline registered
    [ 1.056892] io scheduler cfq registered (default)
    [ 1.057032] pcieport 0000:00:01.0: setting latency timer to 64
    [ 1.057054] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 1.057268] pcieport 0000:00:1c.7: setting latency timer to 64
    [ 1.057307] pcieport 0000:00:1c.7: irq 41 for MSI/MSI-X
    [ 1.057431] intel_idle: MWAIT substates: 0x21120
    [ 1.057433] intel_idle: v0.4 model 0x2A
    [ 1.057434] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 1.057461] ERST: Table is not found!
    [ 1.057557] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.266719] Linux agpgart interface v0.103
    [ 1.266862] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12
    [ 1.269212] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.269296] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.269419] mousedev: PS/2 mouse device common for all mice
    [ 1.269528] rtc_cmos 00:05: RTC can wake from S4
    [ 1.284791] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.293093] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 1.293182] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 1.293354] cpuidle: using governor ladder
    [ 1.293571] cpuidle: using governor menu
    [ 1.293785] TCP cubic registered
    [ 1.293844] NET: Registered protocol family 17
    [ 1.293908] Registering the dns_resolver key type
    [ 1.294036] PM: Hibernation image not present or could not be loaded.
    [ 1.294040] registered taskstats version 1
    [ 1.294561] rtc_cmos 00:05: setting system clock to 2011-06-21 10:20:02 UTC (1308651602)
    [ 1.294687] Initializing network drop monitor service
    [ 1.295830] Freeing unused kernel memory: 724k freed
    [ 1.295985] Write protecting the kernel read-only data: 6144k
    [ 1.296375] Freeing unused kernel memory: 56k freed
    [ 1.298607] Freeing unused kernel memory: 784k freed
    [ 1.309289] udevd[64]: starting version 171
    [ 1.317907] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 1.319573] ACPI: Lid Switch [LID0]
    [ 1.319713] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 1.319808] ACPI: Power Button [PWRB]
    [ 1.319943] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
    [ 1.320032] ACPI: Sleep Button [SBTN]
    [ 1.320141] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 1.320228] ACPI: Power Button [PWRF]
    [ 1.322302] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
    [ 1.322543] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 1.323981] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
    [ 1.324161] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    [ 1.338537] [drm] Initialized drm 1.1.0 20060810
    [ 1.360660] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.360730] i915 0000:00:02.0: setting latency timer to 64
    [ 1.436179] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
    [ 1.436265] [drm] MTRR allocation failed. Graphics performance may suffer.
    [ 1.436500] i915 0000:00:02.0: irq 42 for MSI/MSI-X
    [ 1.436506] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 1.436582] [drm] Driver supports precise vblank timestamp query.
    [ 1.599840] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 1.599928] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
    [ 1.663397] fbcon: inteldrmfb (fb0) is primary device
    [ 1.827767] Console: switching to colour frame buffer device 170x48
    [ 1.830045] fb0: inteldrmfb frame buffer device
    [ 1.830065] drm: registered panic notifier
    [ 1.830272] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
    [ 1.847065] acpi device:1c: registered as cooling_device0
    [ 1.847361] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1a/LNXVIDEO:00/input/input5
    [ 1.847421] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
    [ 1.848207] acpi device:3b: registered as cooling_device1
    [ 1.848467] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input6
    [ 1.848506] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 1.848632] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 1.910964] SCSI subsystem initialized
    [ 1.926419] libata version 3.00 loaded.
    [ 1.932261] ahci 0000:00:1f.2: version 3.0
    [ 1.932273] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 1.932370] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [ 1.932400] ahci: SSS flag set, parallel bus scan disabled
    [ 1.942750] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode
    [ 1.942802] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
    [ 1.942841] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.956534] scsi0 : ahci
    [ 1.956646] scsi1 : ahci
    [ 1.956733] scsi2 : ahci
    [ 1.956821] scsi3 : ahci
    [ 1.956915] scsi4 : ahci
    [ 1.957050] scsi5 : ahci
    [ 1.957355] ata1: SATA max UDMA/133 abar m2048@0xf7c06000 port 0xf7c06100 irq 43
    [ 1.958295] ata2: DUMMY
    [ 1.959215] ata3: DUMMY
    [ 1.960138] ata4: DUMMY
    [ 1.961034] ata5: SATA max UDMA/133 abar m2048@0xf7c06000 port 0xf7c06300 irq 43
    [ 1.961953] ata6: SATA max UDMA/133 abar m2048@0xf7c06000 port 0xf7c06380 irq 43
    [ 2.055997] Refined TSC clocksource calibration: 2294.783 MHz.
    [ 2.056953] Switching to clocksource tsc
    [ 2.282559] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.287654] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
    [ 2.326394] ata1.00: ATA-8: ST9500420AS, D005SDM1, max UDMA/133
    [ 2.327371] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [ 2.333430] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
    [ 2.334802] ata1.00: configured for UDMA/133
    [ 2.342689] scsi 0:0:0:0: Direct-Access ATA ST9500420AS D005 PQ: 0 ANSI: 5
    [ 2.662362] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.676672] ata5.00: ATAPI: TSSTcorp DVD+/-RW TS-U633J, D400, max UDMA/100
    [ 2.691837] ata5.00: configured for UDMA/100
    [ 2.705245] scsi 4:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-U633J D400 PQ: 0 ANSI: 5
    [ 3.025502] ata6: SATA link down (SStatus 0 SControl 300)
    [ 3.034151] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 3.035218] sd 0:0:0:0: [sda] Write Protect is off
    [ 3.036216] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 3.036243] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.041650] sda: sda1 sda2 sda3 sda4
    [ 3.042959] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.050652] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 3.051681] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 3.052815] sr 4:0:0:0: Attached scsi CD-ROM sr0
    [ 3.616479] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 5.358231] udevd[268]: starting version 171
    [ 5.694585] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 5.694704] ACPI: AC Adapter [AC] (off-line)
    [ 5.715255] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    [ 5.758731] ACPI: acpi_idle yielding to intel_idle
    [ 5.767735] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 5.767742] ACPI: Battery Slot [BAT0] (battery present)
    [ 5.780221] wmi: Mapper loaded
    [ 5.794769] thermal LNXTHERM:00: registered as thermal_zone0
    [ 5.794772] ACPI: Thermal Zone [THM] (45 C)
    [ 5.858154] iTCO_vendor_support: vendor-support=0
    [ 5.859958] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 5.872739] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 5.872767] r8169 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 5.872824] r8169 0000:05:00.0: setting latency timer to 64
    [ 5.872831] r8169 0000:05:00.0: (unregistered net_device): unknown MAC, using family default
    [ 5.872895] r8169 0000:05:00.0: irq 44 for MSI/MSI-X
    [ 5.873083] r8169 0000:05:00.0: eth0: RTL8168b/8111b at 0xffffc900051fc000, 18:03:73:57:1d:5f, XID 0c200000 IRQ 44
    [ 5.925164] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    [ 5.925290] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
    [ 5.925394] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 5.998203] cfg80211: Calling CRDA to update world regulatory domain
    [ 6.069340] input: Dell WMI hotkeys as /devices/virtual/input/input7
    [ 6.069943] input: PC Speaker as /devices/platform/pcspkr/input/input8
    [ 6.071237] [drm] radeon defaulting to kernel modesetting.
    [ 6.071240] [drm] radeon kernel modesetting enabled.
    [ 6.071253] VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
    [ 6.071290] radeon 0000:01:00.0: enabling device (0000 -> 0003)
    [ 6.071297] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 6.071302] radeon 0000:01:00.0: setting latency timer to 64
    [ 6.071448] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6760).
    [ 6.071526] [drm] register mmio base: 0xF7B20000
    [ 6.071528] [drm] register mmio size: 131072
    [ 6.071529] vga_switcheroo: enabled
    [ 6.071599] radeon atpx: version is 1
    [ 6.081723] fuse init (API version 7.16)
    [ 6.135312] usbcore: registered new interface driver usbfs
    [ 6.135338] usbcore: registered new interface driver hub
    [ 6.135406] usbcore: registered new device driver usb
    [ 6.373847] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 6.374025] sr 4:0:0:0: Attached scsi generic sg1 type 5
    [ 6.378917] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 6.378972] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [ 6.378996] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [ 6.402772] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 6.429808] xhci_hcd 0000:0b:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 6.429840] xhci_hcd 0000:0b:00.0: setting latency timer to 64
    [ 6.429844] xhci_hcd 0000:0b:00.0: xHCI Host Controller
    [ 6.429862] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 1
    [ 6.443854] xhci_hcd 0000:0b:00.0: irq 16, io mem 0xf7900000
    [ 6.443923] xhci_hcd 0000:0b:00.0: irq 46 for MSI/MSI-X
    [ 6.443925] xhci_hcd 0000:0b:00.0: irq 47 for MSI/MSI-X
    [ 6.443928] xhci_hcd 0000:0b:00.0: irq 48 for MSI/MSI-X
    [ 6.443930] xhci_hcd 0000:0b:00.0: irq 49 for MSI/MSI-X
    [ 6.443933] xhci_hcd 0000:0b:00.0: irq 50 for MSI/MSI-X
    [ 6.444107] xHCI xhci_add_endpoint called for root hub
    [ 6.444109] xHCI xhci_check_bandwidth called for root hub
    [ 6.444133] hub 1-0:1.0: USB hub found
    [ 6.444140] hub 1-0:1.0: 2 ports detected
    [ 6.444194] xhci_hcd 0000:0b:00.0: xHCI Host Controller
    [ 6.444199] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 2
    [ 6.457136] xHCI xhci_add_endpoint called for root hub
    [ 6.457137] xHCI xhci_check_bandwidth called for root hub
    [ 6.457162] hub 2-0:1.0: USB hub found
    [ 6.457169] hub 2-0:1.0: 2 ports detected
    [ 6.550569] ath9k 0000:09:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [ 6.550582] ath9k 0000:09:00.0: setting latency timer to 64
    [ 6.600926] ath: EEPROM regdomain: 0x60
    [ 6.600928] ath: EEPROM indicates we should expect a direct regpair map
    [ 6.600930] ath: Country alpha2 being used: 00
    [ 6.600931] ath: Regpair used: 0x60
    [ 6.662088] acpi_call: Module loaded successfully
    [ 6.755786] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
    [ 6.755983] Registered led device: ath9k-phy0
    [ 6.755988] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90005480000, irq=19
    [ 6.966392] vboxdrv: Found 4 processor cores.
    [ 6.966438] VBoxDrv: dbg - g_abExecMemory=ffffffffa0552360
    [ 6.966472] vboxdrv: fAsync=0 offMin=0x14d offMax=0xc0f
    [ 6.966518] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [ 6.966521] vboxdrv: Successfully loaded version 4.0.8_OSE (interface 0x00180000).
    [ 6.969318] Synaptics Touchpad, model: 1, fw: 7.5, id: 0x1c0b1, caps: 0xd00033/0x240000/0x8a0400
    [ 7.000652] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
    [ 7.002421] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
    [ 7.060620] input: HDA Intel PCH Mic at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 7.060675] input: HDA Intel PCH HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    [ 7.060852] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 7.060881] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 7.060886] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [ 7.060896] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 7.096845] ehci_hcd 0000:00:1a.0: debug port 2
    [ 7.100718] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    [ 7.100729] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7c08000
    [ 7.113384] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 7.113584] hub 3-0:1.0: USB hub found
    [ 7.113588] hub 3-0:1.0: 2 ports detected
    [ 7.113864] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 7.113895] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 7.113898] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [ 7.113907] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
    [ 7.146801] ehci_hcd 0000:00:1d.0: debug port 2
    [ 7.150681] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    [ 7.150698] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7c07000
    [ 7.163324] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 7.163522] hub 4-0:1.0: USB hub found
    [ 7.163527] hub 4-0:1.0: 2 ports detected
    [ 7.419834] usb 3-1: new high speed USB device number 2 using ehci_hcd
    [ 7.543870] hub 3-1:1.0: USB hub found
    [ 7.543925] hub 3-1:1.0: 6 ports detected
    [ 7.649782] usb 4-1: new high speed USB device number 2 using ehci_hcd
    [ 7.773731] hub 4-1:1.0: USB hub found
    [ 7.773839] hub 4-1:1.0: 8 ports detected
    [ 7.839852] usb 3-1.4: new full speed USB device number 3 using ehci_hcd
    [ 7.989777] usb 3-1.5: new high speed USB device number 4 using ehci_hcd
    [ 7.996778] Bluetooth: Atheros AR30xx firmware driver ver 1.0
    [ 8.030855] Bluetooth: Core ver 2.16
    [ 8.030872] NET: Registered protocol family 31
    [ 8.030874] Bluetooth: HCI device and connection manager initialized
    [ 8.030876] Bluetooth: HCI socket layer initialized
    [ 8.030877] Bluetooth: L2CAP socket layer initialized
    [ 8.030911] Bluetooth: SCO socket layer initialized
    [ 8.045164] Bluetooth: Generic Bluetooth USB driver ver 0.6
    [ 8.184216] Linux media interface: v0.10
    [ 8.198960] Linux video capture interface: v2.00
    [ 8.199665] usb 4-1.3: new full speed USB device number 3 using ehci_hcd
    [ 8.203381] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0c45:6484)
    [ 8.301968] usbcore: registered new interface driver ath3k
    [ 8.302079] usbcore: registered new interface driver btusb
    [ 8.362829] usb 4-1.6: new high speed USB device number 4 using ehci_hcd
    [ 8.465460] usb 3-1.4: USB disconnect, device number 3
    [ 8.467817] input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input13
    [ 8.467893] usbcore: registered new interface driver uvcvideo
    [ 8.467902] USB Video Class driver (v1.0.0)
    [ 8.864314] Initializing USB Mass Storage driver...
    [ 8.864367] usbcore: registered new interface driver usb-storage
    [ 8.864368] USB Mass Storage support registered.
    [ 8.879836] scsi6 : usb-storage 4-1.6:1.0
    [ 8.879934] usbcore: registered new interface driver ums-realtek
    [ 8.881878] usbcore: registered new interface driver uas
    [ 9.082584] usb 3-1.4: new full speed USB device number 5 using ehci_hcd
    [ 9.632321] ATOM BIOS: Dell
    [ 9.632686] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
    [ 9.632688] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
    [ 9.632694] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
    [ 9.632696] [drm] Detected VRAM RAM=512M, BAR=256M
    [ 9.632697] [drm] RAM width 64bits DDR
    [ 9.632801] [TTM] Zone kernel: Available graphics memory: 1982574 kiB.
    [ 9.632810] [TTM] Initializing pool allocator.
    [ 9.632829] [drm] radeon: 512M of VRAM memory ready
    [ 9.632830] [drm] radeon: 512M of GTT memory ready.
    [ 9.632840] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 9.632842] [drm] Driver supports precise vblank timestamp query.
    [ 9.632878] radeon 0000:01:00.0: irq 51 for MSI/MSI-X
    [ 9.632882] radeon 0000:01:00.0: radeon: using MSI.
    [ 9.632935] [drm] radeon: irq initialized.
    [ 9.632938] [drm] GART: num cpu pages 131072, num gpu pages 131072
    [ 9.633270] [drm] Loading CAICOS Microcode
    [ 9.655891] radeon 0000:01:00.0: WB enabled
    [ 9.672282] [drm] ring test succeeded in 3 usecs
    [ 9.672360] [drm] radeon: ib pool ready.
    [ 9.672437] [drm] ib test succeeded in 0 usecs
    [ 9.672919] [drm] Radeon Display Connectors
    [ 9.672934] [drm] Internal thermal controller with fan control
    [ 9.674100] [drm] radeon: power management initialized
    [ 9.674811] No connectors reported connected with modes
    [ 9.674813] [drm] Cannot find any crtc or sizes - going 1024x768
    [ 9.676106] [drm] fb mappable at 0xE0141000
    [ 9.676107] [drm] vram apper at 0xE0000000
    [ 9.676108] [drm] size 3145728
    [ 9.676109] [drm] fb depth is 24
    [ 9.676110] [drm] pitch is 4096
    [ 9.676155] fb1: radeondrmfb frame buffer device
    [ 9.676166] [drm] Initialized radeon 2.9.0 20080528 for 0000:01:00.0 on minor 1
    [ 9.881672] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
    [ 9.881872] sd 6:0:0:0: Attached scsi generic sg2 type 0
    [ 10.085648] EXT4-fs (sda3): re-mounted. Opts: (null)
    [ 10.150019] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: user_xattr
    [ 12.409237] acpi_call: Calling \_SB.PCI0.PEG0.PEGP._OFF
    [ 12.409491] acpi_call: Call successful: 0x0
    [ 12.786799] coretemp coretemp.0: TjMax is 100 C.
    [ 12.786833] coretemp coretemp.1: TjMax is 100 C.
    [ 17.058520] sd 6:0:0:0: [sdb] Attached SCSI removable disk
    [ 17.059313] ------------[ cut here ]------------
    [ 17.059321] WARNING: at block/genhd.c:1556 disk_clear_events+0x111/0x120()
    [ 17.059323] Hardware name: Vostro 3350
    [ 17.059325] Modules linked in: coretemp uas ums_realtek usb_storage uvcvideo videodev media v4l2_compat_ioctl32 btusb bluetooth ath3k joydev snd_hda_codec_hdmi snd_hda_codec_idt vboxdrv arc4 acpi_call cpufreq_powersave cpufreq_conservative cpufreq_ondemand ecb ath9k mac80211 xhci_hcd ehci_hcd acpi_cpufreq snd_hda_intel sg snd_hda_codec serio_raw dell_laptop psmouse ath9k_common snd_hwdep freq_table snd_pcm usbcore snd_timer mperf fuse radeon pcspkr dell_wmi ath9k_hw ath cfg80211 snd soundcore snd_page_alloc iTCO_wdt ttm r8169 i2c_i801 iTCO_vendor_support sparse_keymap thermal wmi processor battery mii evdev rfkill dcdbas ac ext4 mbcache jbd2 crc16 sr_mod cdrom sd_mod ahci libahci libata scsi_mod i915 drm_kms_helper drm intel_agp i2c_algo_bit button intel_gtt i2c_core video
    [ 17.059387] Pid: 1414, comm: hdparm Not tainted 2.6.39-ARCH #1
    [ 17.059389] Call Trace:
    [ 17.059395] [<ffffffff8105b8ef>] warn_slowpath_common+0x7f/0xc0
    [ 17.059398] [<ffffffff8105b94a>] warn_slowpath_null+0x1a/0x20
    [ 17.059402] [<ffffffff81206f71>] disk_clear_events+0x111/0x120
    [ 17.059408] [<ffffffff81185d27>] check_disk_change+0x37/0x80
    [ 17.059414] [<ffffffffa0066178>] sd_open+0x98/0x180 [sd_mod]
    [ 17.059418] [<ffffffff81187044>] __blkdev_get+0xb4/0x410
    [ 17.059422] [<ffffffff811873f3>] blkdev_get+0x53/0x300
    [ 17.059425] [<ffffffff81187700>] blkdev_open+0x60/0x90
    [ 17.059430] [<ffffffff8114fcab>] __dentry_open+0x16b/0x390
    [ 17.059434] [<ffffffff811876a0>] ? blkdev_get+0x300/0x300
    [ 17.059438] [<ffffffff81151181>] nameidata_to_filp+0x71/0x80
    [ 17.059442] [<ffffffff8115ffec>] do_last+0x3cc/0xa80
    [ 17.059446] [<ffffffff811614ab>] path_openat+0xcb/0x3c0
    [ 17.059450] [<ffffffff81119ea6>] ? handle_mm_fault+0x1a6/0x360
    [ 17.059454] [<ffffffff811617e2>] do_filp_open+0x42/0xa0
    [ 17.059458] [<ffffffff8116dfec>] ? alloc_fd+0xec/0x140
    [ 17.059462] [<ffffffff81151287>] do_sys_open+0xf7/0x1d0
    [ 17.059466] [<ffffffff81151380>] sys_open+0x20/0x30
    [ 17.059470] [<ffffffff813e9b42>] system_call_fastpath+0x16/0x1b
    [ 17.059473] ---[ end trace 21b491eea571dbe0 ]---
    [ 18.238070] EXT4-fs (sda3): re-mounted. Opts: user_xattr,acl,barrier=1,data=ordered,commit=600
    [ 18.280052] EXT4-fs (sda4): re-mounted. Opts: user_xattr,commit=600
    [ 18.390902] r8169 0000:05:00.0: PME# enabled
    [ 18.405906] xhci_hcd 0000:0b:00.0: PME# enabled
    [ 20.059492] NET: Registered protocol family 10
    [ 20.060138] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 21.206254] r8169 0000:05:00.0: PME# disabled
    [ 21.220343] r8169 0000:05:00.0: eth0: link down
    [ 21.221108] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 22.735267] ehci_hcd 0000:00:1a.0: PCI INT A disabled
    [ 22.735314] ehci_hcd 0000:00:1a.0: PME# enabled
    [ 23.653141] EXT4-fs (sda3): re-mounted. Opts: commit=600
    [ 23.655261] EXT4-fs (sda4): re-mounted. Opts: user_xattr,commit=600
    [ 24.783437] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 24.859463] r8169 0000:05:00.0: PME# enabled
    [ 24.891097] r8169 0000:05:00.0: PME# disabled
    [ 24.898500] r8169 0000:05:00.0: eth0: link down
    [ 24.899264] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 25.024260] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 28.437415] wlan0: authenticate with 00:1a:30:67:88:f1 (try 1)
    [ 28.439488] wlan0: authenticated
    [ 28.439548] wlan0: associate with 00:1a:30:67:88:f1 (try 1)
    [ 28.446589] wlan0: RX AssocResp from 00:1a:30:67:88:f1 (capab=0x431 status=0 aid=57)
    [ 28.446598] wlan0: associated
    [ 28.447530] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 38.703759] wlan0: no IPv6 routers present
    [ 61.981783] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... blt ring idle [waiting on 1411, at 1411], missed IRQ?
    [ 63.527634] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... blt ring idle [waiting on 1464, at 1464], missed IRQ?
    [ 66.642672] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... blt ring idle [waiting on 1534, at 1534], missed IRQ?
    [ 71.430221] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... blt ring idle [waiting on 1633, at 1633], missed IRQ?
    [ 76.816622] chromium-sandbo (2310): /proc/2308/oom_adj is deprecated, please use /proc/2308/oom_score_adj instead.
    [ 1265.088913] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... blt ring idle [waiting on 125929, at 125929], missed IRQ?
    [ 1300.743906] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... blt ring idle [waiting on 129934, at 129934], missed IRQ?
    [ 1426.928921] ehci_hcd 0000:00:1a.0: BAR 0: set to [mem 0xf7c08000-0xf7c083ff] (PCI address [0xf7c08000-0xf7c083ff])
    [ 1426.928952] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
    [ 1426.928973] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
    [ 1426.932062] ehci_hcd 0000:00:1a.0: PME# disabled
    [ 1426.932074] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1426.932081] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1433.822085] ehci_hcd 0000:00:1a.0: PCI INT A disabled
    [ 1433.822161] ehci_hcd 0000:00:1a.0: PME# enabled
    [ 1441.736293] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
    [ 1451.399651] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... blt ring idle [waiting on 139439, at 139439], missed IRQ?
    [ 1490.366250] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... blt ring idle [waiting on 142671, at 142671], missed IRQ?
    [ 1491.892157] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... blt ring idle [waiting on 142691, at 142691], missed IRQ?
    [ 1504.535621] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... blt ring idle [waiting on 143528, at 143528], missed IRQ?
    [ 1555.955548] cfg80211: Calling CRDA for country: IT
    [ 1557.163221] wlan0: authenticate with 00:1a:30:67:88:f1 (try 1)
    [ 1557.165287] wlan0: authenticated
    [ 1557.165332] wlan0: associate with 00:1a:30:67:88:f1 (try 1)
    [ 1557.170691] wlan0: RX AssocResp from 00:1a:30:67:88:f1 (capab=0x31 status=0 aid=57)
    [ 1557.170699] wlan0: associated
    [ 1560.523624] wlan0: deauthenticating from 00:1a:30:67:88:f1 by local choice (reason=3)
    [ 1560.617243] cfg80211: Calling CRDA to update world regulatory domain
    [ 1560.738829] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 1560.875326] r8169 0000:05:00.0: PME# enabled
    [ 1560.906883] r8169 0000:05:00.0: PME# disabled
    [ 1560.914250] r8169 0000:05:00.0: eth0: link down
    [ 1560.915053] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 1565.451894] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 1566.954570] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 1567.038998] r8169 0000:05:00.0: PME#

    sure...
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
    Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
    Bus 001 Device 005: ID 0cf3:3005 Atheros Communications, Inc.
    Bus 001 Device 004: ID 0c45:6484 Microdia
    Bus 002 Device 003: ID 138a:0011 Validity Sensors, Inc.
    Bus 002 Device 004: ID 0bda:0138 Realtek Semiconductor Corp.
    Bus 002 Device 005: ID 0fce:2149 Sony Ericsson Mobile Communications AB Xperia X8 (debug)

  • Photoshop elements 10 will not migrate to my new macbook pro/retina display.  There is no CD/DVD player on this machine.  Any suggestions on how to get Elements onto my machine?  Yes, I have the disk(s).

    Photoshop elements 10 will not migrate to my new macbook pro/retina display.  There is no CD/DVD player on this machine.  Any suggestions on how to get Elements onto my machine?  Yes, I have the disk(s).  Am I going to have to buy an external CD/DVD player to load this one program:(

    I have ordered a USB3 BluRay/DVD/CD player/burner and will use that both with my iMac ( in which the Superdrive seems to be failing ) and the MBPro Retina I just bought .

  • MacBook Pro 15' Core i7 Running Boot Camp Turns on in OSX fine, but in windows, whenever plug it in, the display goes black.

    I have a 2011 MBP 15'. It has a core i7 2.4GHz 8gb of ram, and a HD 6750m. I rarely use Lion, I use Windows 7 Enterprise. I boot up my laptop and it turns on fine. Windows loads, but as soon as I plug the MagSafe adapter into the laptop, the display turns off.
    Any ideas? I have already reset the SMC, and reset the PRAM and NVRAM. Neither worked.

    Since you have a Mid2014 MBP, the USB should contain the Windows installer and BC drivers. Make sure your USB is a USB2 flash drive/disk. USB3 will fail.
    There should be no hubs between the USB and the MBP and no other external peripherals connected to the Mac.
    However at the last step when I click the "Install" button, my computer will restart and boot into OSX.
    This indicates that the Mac cannot find the USB with Windows ISO and BC drivers.

  • Multiple image displays

    Hi,
    I plugged 2 USB3.0 cameras in LabVIEW, and displayed the images from both in the front panel seperately. One image display corresponds to one camera source. When I run the codes, the display windows are supposed to show separate image grabbed by the corresonding camera. However, the displays windows sometimes show the same image source from one camera and they are not stable. I guess the signals from both cameras are mixed sometimes. I have no idea how to solve this problem.Has anyone met with the same problem before?
    Also, I'd like to confirm my calcultion of bandwidth. I want to plug 6 USB3.0 cameras in total eventually. They will all be set the same with resolution 1024x1280, mono8. The bandwidth of USB3.0 is 625 MB/s. Thus, the calculatin of maximum frame rate for each camera the setup could handle should be:
    maximum frame rate = 625M / (1280 x 1024 x 6) = 79.4 fps.  Is this right? 
    Thanks,
    Olivia
    Solved!
    Go to Solution.

    Hi,
    I attached my vi. file here.
    Thanks,
    Olivia
    Attachments:
    double_camera.vi ‏85 KB

  • Connecting MBA 2012 to three External Displays

    I am looking to purchase a 2012 MBA, contingent upon connecting to three external displays. As the MBA 2012 has a USB3.0 and a Thunderbolt port,  I plan to use  -
    - A Plugable UGA-2K-A USB 2.0 adapter to convert the USB3.0 to a HDMI/DVI input on a 21 monitor (For text only)
    - Use a DualHead2Go Digital SE to connect it from the Thunderbolt port to the HDMI/DVI inputs of the two external monitors (run two different applications and not a stretched image)
    I am wondering if this would work (albeit with minimal lag) or if are there any other alternatives to hooking it up to three external monitors.  Thanks

    Did you ever get this figured out?

  • When a new thunderbolt display?

    My money for new display stays on my account just waiting for new thunderbolt display to arrive. Why does apple not want my money?
    More resolution, HDMI, USB3, Two thunderbolt, imac design and im ready to transfer some moneys. 

    Not sure the new one will provide much more.  I have the current model.  It has 2.0 USB, firewire and Thunderbolt ports.  I have it conncted to a Mini that has 4-3.0 USB, HDMI and TB port.  More than I will ever need.  The new one will have the same resolution as the present design.

  • TB Display loose keyboard at least twice a day

    I have a 27" TB display working with a Macbook Pro Retina 15"
    Keyboard and iPhone is connected to the TBD as LAN.
    This works for half a day, then the keyboard is not working untilk I cut the TBD from the MBPR and connect it again.
    So it is working for another 2-5 hours - then the same again.
    it ***** because the full screen apps changes every times.
    what can I do?
    br
    peter

    Since the Thunderbolt Display has been released I have seen this issue on literally hundreds of display/laptop combinations. With and without the extension cable. I have not found any logic around the issue, trying different usb/thunderbolt ports, different sleep settings, power settings. This is a legitmate issue that should be addressed and Apple is not addressing it -- or can't address it. BTW-There is NO reason to engineer a product with an extension cable needed to operate the peripheral. The only way to solve this is to burn a USB port on your laptop. I am fairly certain the issue is power related over the Thunderbolt bus. However, I have also experienced issues with USB3 hubs on macs. So maybe it is a larger power issue.
    Anyway, an Apple wired keyboard should just work out of the box.

  • Display port on 15" 2013 Retina - what does it send out?

    OK, seems others are having this issue, but I'm not sure any of the solutions explain what the issue really is, and what is making it happen.  Here goes:
    15" Retina (2 weeks old)
    Dell Ultrasharp U2713H 27" monitor (2560 x 1440)
    So, HDMI (X), DVI (X), Display Port to mini display port (X), Dual Link DVI to Dual Link DVI adaptor mini display port (Y)
    The only way I can get native 2560 res is through the (AUS$120) Dual Link DVI adaptor to mini display port - which ***** cause it is ugly, messy, and uses usb2 (which it needs for power), and the laptop and screen use usb3 (flash cards, camera cards, HD connections etc).
    Before I used the Dual Link DVI adaptor, I tried a whole lot of options:
    Non retina display - Display port to mini display port - no problem, native looks great
    13" retina macbook pro - display port to mini display port - no problem, native looks great (the 13" retina is actually 2560 x 1440 - so same as the monitor)
    Several other 15" retinas - same as mine
    (I work at a uni, so lots of gear around).
    So, my question is this: 
    Why does the Display port to mini display port not work off a 15" retina?  (it runs the res, but it looks like really bad jpeg compression)...

    Some issues - particularly screen image retention - seem to be remaining in the current builds of the rMBP. If I were you, I would purchase a non-Retina at this time and possibly wait for a 2nd generation Retina machine to come out later in the year that may not have the IR problems - if you want to get educational pricing before April.
    Just too many issues with the rMBP at this time for me... I can wait.
    Clinton

Maybe you are looking for

  • NetBoot Image with 10.4.3. won't do diskless mode

    Hi all, I have set up a NetBoot disk image containing 10.4.3. In NetBoot I have checked the diskless button, but every client that boots from this image seems to ignore the diskless setting, so I can't unmount the client's hard disk to perform an ASR

  • Using Monitor to Watch DVD

    I recently got a Samsung monitor which I use to hook up to my macbook. I usually use it as my only screen, but there are times that I want to watch a DVD and work at the same time. I am trying to figure out how to get either Front Row or the DVD play

  • Sharing IMAP folders

    Does OSX Mail Services allow for common shared IMAP folders between users. I am hoping to allow a number of users to share mboxes in order to allow them access to the entire project email and eliminate constant cc'ing and forwarding of email. I have

  • Hi, how can I eliminate the post stamps on pages of my iPhoto album? Thanks for your help - regards - Claire

    Hello everyone, In the subject, I believe I specify exactly my problem. I am using iPhoto but am a beginner. So lots of new things to learn. I thus would like to eliminate the post stamps which appear on almost every single page of my photo album. Ca

  • Tax code with Jurisdiction Code

    Dear Gurus, How to find the Tax code is assigned to how many Jurisdiction codes, is there any Table for checking the same. regards, Gopi.P