USC C220 M3 ESXi Can't see a raid5

Hello, i have a problem with UCS C220 M3 with 4 SATA drives and UCS-RAID-9266CV controller.
I try to install ESXi on this server.
- I have download Cisco customization *ISO ESXi image ( try different versions 5.0, 5.1,5.5)
- Setup CIMC, set ip parameters.
When the server booting - In system parameters press F2 select from Onboard SCU Storage SW Stack select Intel RSTe
then made raid 5 via CTRL I
Then I try download ESXi iso file on server via KVM Console. ESXi begin to install, then when selecting of Drives appears I can't see my storage there, ESXi can't recognize:
Then I try to disable Onboard SCU Storage Support, after this server can't see physical drives. It doesn't helped.
What could be wrong?
I hope for your help. Thank you.

Hi Vassiliy,
From the screenshot you provided, I believe you are using embedded raid controller to configure raid. Unfortunately the embedded controller is not support by ESXi, so the installation won’t be able to see the raid volume that you created with this controller. In this case you will need to use a PCI or mezzanine base controller for the installation.
Embedded MegaRAID Controller
http://www.cisco.com/en/US/docs/unified_computing/ucs/c/hw/C220/install/raid.html#wp1028426
Supported Mezzanine and PCI controllers
Be kind and Mark as Answer if I helped.

Similar Messages

How to make ESXI 5.5 See my RAID in HP SFF 8300

how to make ESXI 5.5 See my RAID in HP SFF 8300
i'm create RAID in HP SFF 8300 and when install ESXI 5.5 can't see my RAID
but when install windows server 2012 can see my RAID
ESXI see my 2 Hard disk only not see my RAID

Hello Force5g,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are trying to get your ESXI 5.5 to see your RAID in your HP Compaq Elite 8300 Small Form Factor PC. I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Business PCs - Compaq, Elite, Pro.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Nexus 1000V - Can not see VEM in VSM

Hello,
We are trying the version 4.0(4)SV1(2) and we can not see the VEM in the VSM yet. We don't see the "System Uplink" port profile assigned to a physical interface and we think that maybe this is the problem.
This is our config of port-profile
port-profile type ethernet system-uplink
vmware port-group
switchport mode trunk
switchport trunk allowed vlan all
no shutdown
system vlan 22-23
state enabled
port-profile type vethernet vlan-22
vmware port-group
switchport mode access
switchport access vlan 22
no shutdown
state enabled
port-profile type vethernet vlan-23
vmware port-group
switchport mode access
switchport access vlan 23
no shutdown
state enabled
svs-domain
domain id 50
control vlan 22
packet vlan 23
svs mode L2
Thank you! Celeste

N1Kv# sh svs domain
SVS domain config:
Domain id:    1
Control vlan: 901
Packet vlan: 900
L2/L3 Control mode: L2
L3 control interface: NA
Status: Config push to VC successful.
N1kv# sh svs connections
connection duesseldorf:
    ip address: 172.34.57.16
    remote port: 80
    protocol: vmware-vim https
    certificate: default
    datacenter name: Harvard
    DVS uuid: 61 de 1f 50 8d 07 26 fa-2a fa de 91 4b bc c9 d8
    config status: Enabled
    operational status: Connected
    sync status: Complete
    version: VMware vCenter Server 4.1.0 Build-258902
DF-ESX-V-01-PRZ# sh port-profile
port-profile Access-I_ESX-VM-NET_MGT
description: ## I_ESX-VM-NET_MGT ##
type: vethernet
status: enabled
capability l3control: no
pinning control-vlan: -
pinning packet-vlan: -
system vlans: none
port-group: Access-I_ESX-VM-NET_MGT
max ports: 32
inherit:
config attributes:
    switchport mode access
    switchport access vlan 2014
evaluated config attributes:
    switchport mode access
    switchport access vlan 2014
assigned interfaces:
port-profile Access-I_ESX-VM-Net_PUB
description: ## I_ESX-VM-Net_PUB ##
type: vethernet
status: enabled
capability l3control: no
pinning control-vlan: -
pinning packet-vlan: -
system vlans: none
port-group: Access-I_ESX-VM-Net_PUB
max ports: 32
inherit:
config attributes:
    switchport mode access
    switchport access vlan 2001
evaluated config attributes:
    switchport mode access
    switchport access vlan 2001
assigned interfaces:
port-profile Access-I_WIN-NET_PRI
description: ## I_WIN-NET_PRI ##
type: vethernet
status: enabled
capability l3control: no
pinning control-vlan: -
pinning packet-vlan: -
system vlans: none
port-group: Access-I_WIN-NET_PRI
max ports: 32
inherit:
config attributes:
    switchport mode access
    switchport access vlan 2100
evaluated config attributes:
    switchport mode access
    switchport access vlan 2100
assigned interfaces:
port-profile Access-Z_IKB_VSERV7-8
description: ## VSERV7-8 bzw. public ##
type: vethernet
status: enabled
capability l3control: no
pinning control-vlan: -
pinning packet-vlan: -
system vlans: none
port-group: Access-Z_IKB_VSERV7-8
max ports: 32
inherit:
config attributes:
    switchport mode access
    switchport access vlan 310
evaluated config attributes:
    switchport mode access
    switchport access vlan 310
assigned interfaces:
port-profile Access-Z_IKB_VSERV7-8neu
description: ## VSERV7-8neu bzw. public ##
type: vethernet
status: enabled
capability l3control: no
pinning control-vlan: -
pinning packet-vlan: -
system vlans: none
port-group: Access-Z_IKB_VSERV7-8neu
max ports: 32
inherit:
config attributes:
    switchport mode access
    switchport access vlan 311
evaluated config attributes:
    switchport mode access
    switchport access vlan 311
assigned interfaces:
port-profile InfraAccess-FT
description: ## FT ##
type: vethernet
status: enabled
capability l3control: no
pinning control-vlan: -
pinning packet-vlan: -
system vlans: none
port-group: InfraAccess-FT
max ports: 32
inherit:
config attributes:
    switchport mode access
    switchport access vlan 902
evaluated config attributes:
    switchport mode access
    switchport access vlan 902
assigned interfaces:
port-profile InfraAccess-I_ESX-NET_MGT
description: ## I_ESX-NET_MGT ##
type: vethernet
status: enabled
capability l3control: no
pinning control-vlan: -
pinning packet-vlan: -
system vlans: none
port-group: InfraAccess-I_ESX-NET_MGT
max ports: 32
inherit:
config attributes:
    switchport mode access
    switchport access vlan 2010
evaluated config attributes:
    switchport mode access
    switchport access vlan 2010
assigned interfaces:
port-profile InfraAccess-VMotion
description: ## VMotion ##
type: vethernet
status: enabled
capability l3control: no
pinning control-vlan: -
pinning packet-vlan: -
system vlans: none
port-group: InfraAccess-VMotion
max ports: 32
inherit:
config attributes:
    switchport mode access
    switchport access vlan 903
evaluated config attributes:
    switchport mode access
    switchport access vlan 903
assigned interfaces:
port-profile InfraAccess-VSM-Control
description: ## VSM-Control ##
type: vethernet
status: enabled
capability l3control: no
pinning control-vlan: -
pinning packet-vlan: -
system vlans: none
port-group: InfraAccess-VSM-Control
max ports: 32
inherit:
config attributes:
    switchport mode access
    switchport access vlan 901
evaluated config attributes:
    switchport mode access
    switchport access vlan 901
assigned interfaces:
port-profile InfraAccess-VSM-Packet
description: ## VSM-Packet ##
type: vethernet
status: enabled
capability l3control: no
pinning control-vlan: -
pinning packet-vlan: -
system vlans: none
port-group: InfraAccess-VSM-Packet
max ports: 32
inherit:
config attributes:
    switchport mode access
    switchport access vlan 900
evaluated config attributes:
    switchport mode access
    switchport access vlan 900
assigned interfaces:
port-profile Unused_Or_Quarantine_Uplink
description: Port-group created for Nexus1000V internal usage. Do not use.
type: ethernet
status: enabled
capability l3control: no
pinning control-vlan: -
pinning packet-vlan: -
system vlans: none
port-group: Unused_Or_Quarantine_Uplink
max ports: -
inherit:
config attributes:
    shutdown
evaluated config attributes:
    shutdown
assigned interfaces:
port-profile Unused_Or_Quarantine_Veth
description: Port-group created for Nexus1000V internal usage. Do not use.
type: vethernet
status: enabled
capability l3control: no
pinning control-vlan: -
pinning packet-vlan: -
system vlans: none
port-group: Unused_Or_Quarantine_Veth
max ports: 32
inherit:
config attributes:
    shutdown
evaluated config attributes:
    shutdown
assigned interfaces:
port-profile Uplink-Customer
description: ## Uplink zu DF-ESX-C-01 ##
type: ethernet
status: enabled
capability l3control: no
pinning control-vlan: -
pinning packet-vlan: -
system vlans: none
port-group: Uplink-Customer
max ports: -
inherit:
config attributes:
    switchport mode trunk
    switchport trunk allowed vlan 310-311,2001,2100
    no shutdown
evaluated config attributes:
    switchport mode trunk
    switchport trunk allowed vlan 310-311,2001,2100
    no shutdown
assigned interfaces:
port-profile Uplink-FT
description: ## Uplink zu DF-ESX-B-01 FT ##
type: ethernet
status: enabled
capability l3control: no
pinning control-vlan: -
pinning packet-vlan: -
system vlans: none
port-group: Uplink-FT
max ports: -
inherit:
config attributes:
    switchport mode access
    switchport access vlan 902
    no shutdown
evaluated config attributes:
    switchport mode access
    switchport access vlan 902
    no shutdown
assigned interfaces:
port-profile Uplink-Management
description: ## Uplink zu DF-ESX-B-01 Mgmt ##
type: ethernet
status: enabled
capability l3control: no
pinning control-vlan: -
system vlans: 900-901,2010
port-group: Uplink-Management
max ports: -
inherit:
config attributes:
    switchport mode trunk
    switchport trunk allowed vlan 900-901,2010,2014
    no shutdown
evaluated config attributes:
    switchport mode trunk
    switchport trunk allowed vlan 900-901,2010,2014
    no shutdown
assigned interfaces:
port-profile Uplink-VMotion
description: ## Uplink zu DF-ESX-B-01 VMotion ##
type: ethernet
status: enabled
capability l3control: no
pinning control-vlan: -
pinning packet-vlan: -
system vlans: none
port-group: Uplink-VMotion
max ports: -
inherit:
config attributes:
    switchport mode access
    switchport access vlan 903
    no shutdown
evaluated config attributes:
    switchport mode access
    switchport access vlan 903
    no shutdown
assigned interfaces:
vemcmd show version
VEM Version: 4.0.4.1.3.1.0-2.0.3
VSM Version: 4.0(4)SV1(3a)
System Version: VMware ESXi 4.1.0 Releasebuild-260247

How can I see Calendar event END times at a glance?

How can I display my Calendar event titles exactly as I type them? I do not want Calendar to remove duration from the titles of my events. Otherwise I can't see event END times at a glance in month view; only start times. How can I "trick" Calendar to just show my titles as I type them - as I always could before I upgraded. I used to be able to enter "Seminar 9am-5:45" and it would appear that way regardless of how or what I chose to enter (or not enter) for duration.
I am running OSX 10.9.3.

It's a bit weird, but if you type in the time info TWICE into the event title then Calendar uses/deletes one of them to populate the event details and leaves the other.
Apple - Mac OS X - Feedback

Can not see any Data in OKE.OKE_K_FUND_ALLOCATIONS

I am looking in this table with SQLPlus and TOAD and can not see any rows.

Hi Hussein;
First I ran:
select fu.user_name, fr.responsibility_name
, fu.user_id, fr.responsibility_id resp_id
, furg.responsibility_application_id resp_appl_id, furg.security_group_id sec_group_id
from apps.fnd_user_resp_groups furg
, apps.fnd_user fu
, apps.fnd_responsibility_vl fr
where furg.user_id = fu.user_id
and upper(fu.user_name) = upper('&User_Name')
and furg.responsibility_id = fr.responsibility_id
order by 1, 3
Passing in SYSADMIN
Taking this row:
SYSADMIN,General Ledger Super User,0,20434,101,0
I ran:
I ran exec fnd_global.APPS_INITIALIZE (0,20434,101,0);
I still get no rows returned.
Is thier a way in the App to ensure the SYSADMIN,General Ledger Super User can see this data? Or am I missing something else?

Can not see historical data in Time Machine backup

Hi folks
First my setup:
   MBP Late2012
   Samsung Evo 840 SSD
   external USB 3.0 1TB as TimeMachine HD
   Mac OS X Mavericks
Now my problem.
After updating to Mavericks I've made a full backup with Time Machine.
Then I swapped the former 500TB HDD to the Samsung Evo 840 500TB.
A clean setup of Mavericks follows.
After that I restored the Backup from Time Machine.
Everything ok. Til now.
Because everthing works fine in the past, I did not control the Time Machine.
Today I wanna restore a File from my "Pictures" folder.
So I opened Time Machine.
Oops.
There I can only see the latest run.
Also in the timeline on the right side the only entries are TODAY and NOW.
I can not scroll into the past.
All windows behind the current window have a black titlebar.
In Mountain lion the titlebars are grey if there is data available
and the title contains the date of the backup.
What is the problem?
Is there a bug?
Did I something wrong?
Thanx in adv.
      Stoiker

Hi masong517
What a treasure trove of hints and solutions.
I didn't know this page.
But you are right with "E2".
This solved my problem.
Thank you very much.

Can not see the data in the grid

Hi,
nice to see the new features, but I can not see the the table inserts
in the data grid - the <data> rider is not clickable.
Regards

Hi annerose,
This problem has appeared in a few other threads. It's caused by installing Release 2 Raptor over Release 1 Raptor without first deinstalling Release 1 Raptor . So what you need to do is:
1) Back up any important Raptor files, e.g. connections etc.
2) Remove the existing Raptor Rel 1 installation folder
3) Install Raptor Rel 2
Hope this helps
ady

How do I change the icloud account on my iphone? I want to use the same account for all my apple devices (macbook air and imac and iphone). I can't see where I can amend the iphone account because it is in grey?

I want to use the same account for all my apple devices (macbook air, imac and iphone). I can't see how I can amend the iphone account because it is in grey? I also can't remember the password for this account so i can't even delete it and start again?
Help!
Thanks

Deleting an iCloud account only deletes it from the Device, not from iCloud. In iOS 8, the name of this setting changed to "Sign Out" as that is a better reflection of what actually happens. Your iCloud data remains on the server, available to devices still signed into the account, but the device you sign out of the account on is disconnected from the account, and as a result, the iCloud data from that account is removed from the device. It will redownload to the device should you sign back into the account.
The only issue you'll run into when you switch between accounts is with my photo stream photos older than 30 days. When you delete (or sign out of) and account, your photo stream photos are deleted along with the other data from the account in question. However, unlike other data which remains on the server and can redownload to your device when you sign back in, my photo stream photos only remain in iCloud for 30 days. When you sign back in, you will only get back my photo stream photos added in the last 30 days (as older photos are no longer in iCloud to redownload). Like other account data, any my photo stream photos on your other devices signed into the account are unaffected by this. If you want to keep older my photo stream photos on your device as you change iCloud accounts, save them to your camera roll before deleting (signing out of) the account.

My photos just became empty boxes, if I click on them they open, but I can't see them at a glance. Anyone know why? thanks

My photos on iphotos just became empty boxes, bordered by white intermittent lines. If I click on a photo it comes up, but I can't see what each photo is at a glance. Any ideas how to resolve this? thanks

Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the options to rebuild the thumbnails.
Regards
TD

I have multiple devices in my family. Each of us has an iPhone and an iPad. Is there a way for each of us to have our own Apple ID but one account so we can all get the same music, movies, books, etc. I can't see paying twice for something in the same fam

I have multiple devices in my family. Each of us has an iPhone and an iPad. Is there a way for each of us to have our own Apple ID but one account so we can all get the same music, movies, books, etc. I can't see paying twice for something in the same family.

Welcome to the world of digital media. Your can't really transfer it. I don't know what the rules are about transferring to your spouse but I do know that in some cases when you die, your heirs cannot inherit your digital media. This is why there is still an advantage to buying the CD since the usage rights belong to whomever holds the physical media.
A possible workaround is to burn the songs to a music CD with yout account (tracks only without song titles) and then having your wife upload it as a regular music CD onto her account. It's been a while since i've done this so I'm not sure if it would work now.
Please note that I'm not advocating copyright and/or TOS violations. I'm only suggesting ways to copy music for your own personal use which has traditonally been permitted. I only did this because I wanted to convert iTunes songs to mp3 files so I could burn them onto a data CD for use in my car. It would make sense that since married couples are a joint entity, this would be personal use.
Also, I'm not a lawyer so don't take this as legal advice.

Can you see a image in the Get Info Window?

After upgrading to Mt LIon and while using CS6, I can't see image previews in the Get Info window. Can't see images in the upper left corner of the get info window, so I can't make a selection and then do a copy- paste like I could do before I upgraded to Mt Lion with CS6. I want to be able to paste a image of the subjects in my folders.. IE folder of Panda Bears would have a image of a Panda showing on that folder. Folder of The Great Wall would have a image of the Great Wall on the Folder of Great Wall pictures. This has always worked for the past many years I have used a Mac and Photoshop. I started with Photoshop 2. All my photo folders are represented by images so I have a good idea of what is contained in each folder. Now after 2 weeks in China, 20 folders are represented by 10-11-12, 10-12-12, 10-13-12, 10-14-12 and so on. Shows me nothing but dates. I have tried saving as Jpeg, Tiff, and PAD, and still can't do a copy-paste in the Get Info window. Apple says it is a Adobe problem, Yesterday Adobe told me it is because I am uusing a Nikon D800 and Adobe does not have a patcdh for the NEW Nikon camera. I then tried using my Nikon D2Xs, Nikon D3X, Nikon 800 and even my wife's D50 and none of these camera allow me to copy paste the thumbnail image to the clipoboard like I have been able to do for YEARS... I can see images in a folder in Bridge, but the images dont show in my desktop folders.IE, a folder on my desktop with 200 pictures only show with words/ numbers/letters NO IMAGES appear in the folders on the desktop. On some folders the folders in a folder don't show up as Folders either.
Can Any one help me. Same thing happens on my MACPRO w 16 GB Ram and on my 17" MacBook Pro.

Allan Sicks wrote:
Thanks for your input. Problem might be with the EASTER BUNNY..... have to have someone to blame.
I can't blame you for saying that.
Adobe is the clear owner of the responsibility to make functional their product that they claim is compatible with your operating system. Adobe is the one who sold you the product.
I just went looking for what Adobe has said about Mountain Lion compatibility, and they both list Mountain Lion as compatible and include such language as that on this page (emphasis mine):
Adobe and Apple have worked closely together to test Adobe® Creative Suite® 5, 5.5 and CS6 editions and individual products for reliability, performance and user experience when installed on Intel® based systems running Mac OS X Mountain Lion (v10.8). Earlier versions of Adobe Photoshop® (CS3 and CS4) software were also tested with Mountain Lion and there are currently no known issues.
I suggest that Adobe needs to get on the ball and get this fixed. The time for user patience is over.
If someone from Adobe is saying "Adobe can't fix it" then that someone is at the wrong authority level and/or is thinking on the wrong level.
This is business and the business is making products that have value and are sold to people who perceive that value. Adobe doesn't get to keep selling products that don't work while standing on principles that "it's someone else's problem". Customers don't care why it doesn't work.
It's obvious to a child that if Photoshop CS5 can write the proper things to the Apple OS so that the thumbnails are visible, that there's something Adobe could do to fix it.
But EVEN IF this were something only Apple could fix, that Apple hasn't fixed it yet says pretty loudly that Adobe isn't making the right overtures to Apple for their mutual benefit. Adobe, are your executives so greedy that they can't grease a few palms of their friends over at Apple to put some priority on this? What's the problem here? Has Adobe actually forgotten how to do business?
-Noel
P.S., You should know that I don't use a Mac and am personally having no issues with seeing proper thumbnails and previews on my Windows 7 and 8 systems, since the software that does that isn't from Adobe.

On my ipad 2 I can't "see" the hundreds of spoken audio tracks that are in my itunes and on my ipod touch. Is there something I didn't do during sync up?

On my ipad 2 I can't "see" the hundreds of spoken audio tracks that are in my itunes and on my ipod touch. Is there something I didn't do during sync up? The tracks are from voice recordings that were downloaded from an extrernal drive and weren't necessarily tagged as spoken audio. Do I need to go back into itunes and relabel these tracks so they will show up on my ipad2?
Thanks in advance for your help!

With the iPad connected to the computer, while iTunes is running, click on the iPad name on the left side under devices. Click on the Movies tab and look for Movie Rentals. You want to "Move" the films to the iPad.

Can't see month view in iCloud calendar

When I click on the month view tab at the bottom of the iCloud calendar screen, nothing happens. For that matter, clicking on the day tab doesn't do anything either.
As another annoyance, in the week view I see the weeks events that were brought in from my Mac, but going to the next week shows no events. HELP!

I am having the same problem. It started when the month view was not available. It took me a long time to figure out that when I minimize the month view, it shows up on the dock as a teeny tiny icon. When I click it, nothing happens. When I go to Week View then my calendar shows up. NOW though, my week view has disappeared and now I'm only left with DAY view. The same exact thing happens in Week view. I have no window, nothing to "grab" that I can possibly see to get it back on my screen. BUT it will be a teeny tiny icon when it's minimized.
The only thing I can think of is that I'm a tech teacher using a projector and my laptop changes resolutions with different software programs. I have had iCal open when the resolution has had to change. The only thing I can think of is that somehow that did something to the window and I can't get it back.

Can't see who has replied to the thread in the forum, its pointess?

What's the point in creating a system where you can't see who has replied to the thread? Its absolutely F**CKING pointless? Does anyone at Adobe have any brains or are they all sitting with their heads up their backsides?
Surely before you release such garbage you test for these very simple issues, right?
osgood_(NOT M Golding) If anyone at Adobe is monitoring this please get my screen named changed to what it was previously as well.

It needs a 'latest reply' on the posted list page like the old version otherwise you have no idea if anyone has replied to the post or not without opening it.
Latest reply: May 3, 2014 2:17 AM by . osgood_
The line below is not that necessary in the order of priority, which for all intense and purposes is quite useless. I don't really care about how long ago something was posted or where it was posted but an indication to show 'updated' posts and by who is vital.
9 minutes ago in Dreamweaver support forum
Why do we even need 'Dreamweaver support forum'. We already know that's where we are! I guess a selection of posts from other forums may appear in a 'general' postings list somewhere, but who really cares - if I'm asking a question related to DW that's the forum I'm going to, not a general list as I don't care a monkey knackers what's been posted in Fireworks or InDesign or Illustrator. If I did I'd go to those forums.
If you are tracking several postings it is going to become hugely annoying for both the person who has asked the question and the people helping the original poster as many replies will potentially go unnoticed and not resolved.
And what's with the silly horizontal scroll bar being created for long lines of text? That's annoying too.
Plenty of teething issue you need to get your head around over the next few weeks.

I set an alarm with Siri. Can she only set one at a time, and how can I see/cancel it?

Title. I set an alarm, then shortly after asked her to set another alarm.
1) are both alarms in effect?
2) where can I see/cancel them? It says it can't modify or delete them.

Go to the Clock app and see if they are listed. I just set two via Siri on my iPad and both are listed. I can turn them off or deleted (via edit button) the alarms.

USC C220 M3 ESXi Can't see a raid5

Similar Messages

Maybe you are looking for