Use 2 App modules with connection to 2 databases on 1 UIX page?

Is it possible use 2 different Application modules with connection to different databases on one UIX page?
Thank you.

Yes.
Use a <bc4j:registryDef> with two <bc4j:rootAppModule>'s inside. Everything else is the same as the single root application module case.
More documentation is available in the UIX Developer's Guide available in the JDeveloper help system and online at:
http://helponline.oracle.com/uix/help/
Kind Regards.

Similar Messages

My iPhone 5 won't let me use my apps until I connect them with iTunes after downloading ios7. Solutions?

My iPhone 5 won't let me use my apps until I connect them with iTunes after downloading ios7. There's just a thing that pops up and says that in order to activate banners and push notifications I have to connect the app with iTunes. The thing won't go away no matter how many times I push ok, and it doesn't give me another option. Solutions?

Oh my gosh I had the EXACT same problem, and for ages I couldn't figure out how to fix it until today. Here's what I did:
First I went onto my computer, opened itunes, and un-installed tumblr, vine and kik. These were the apps I was having problems with (it said I had them on my phone but, like you, they didn't show).
Then I went to the itunes store, searched for each one, and it said I could update them so I did (just FYI: for tumblr a window popped up saying "please click ok to confirm you are 17 years or older", so I did that also)
When I went back to my phone and tried installing them again (still on my computer), it worked!
I hope this helps, because it was incredibly frustrating. Good luck!

How do I use the App store with macbook pro and mac pro

I currently use the app store with the mac book, but want to buy (share?) apps and music with the mac pro.
I can't find anything that specifically outlines how this works.
I use SplashID with the macbook and an iPhone, and want to use it (and sync it) on the mac pro as well.
If you buy apps for a macbook, can you use them on a second machine, or do you need to buy it a second time?

Your license from the MAS allows you to download and install the apps on as many Macs as you own or have under your control (institutional or employer supplied Macs.) The Mac should to be running Mac OS X 10.6.8 Snow Leopard or Mac OS X 10.7.2 Lion. Open the MAS app on the Mac Pro and sign into your account to have access to download all of your previous purchases in the Purchased pane.
Simple apps can also be dragged & dropped over a network connection from the MacBook to the Mac Pro.

Use of function module 'FTP connect'

when we use the function module 'FTP connect', and 'FTP_R3_TO_SERVER'

Hi,
The Function module GUI_DOWNLOAD is used to download the data into presentation server and Dataset concepts to download the data into Application server. Sometimes we may require to download the data from other system (3rd Party System) to SAP and Vice Versa. In such scenarios, the concept of FTP commands comes into picture.
the various FTP commands are:
HTTP_SCRAMBLE, FTP_CONNECT, FTP_R3_TO_SERVER, FTP_DISCONNECT, RFC_CONNECTION_CLOSE function modules.
FTP_CONNECT : This is used to connect to other system from SAP with the help of Userid & amp; scrambled password & Host string & destination (default 'SAPFTP').
FTP_R3_TO_SERVERThis is used to transfer the internal table data as a file to other system in the character mode.
for more details refer to link:
Transferring Data from SAP to Other Systems
Thanks
Rajesh Kumar

Can I use Oracle app server with mysql

Can I use Oracle app server with mysql. I seem to have the following error when trying to create a datastore. I have mysql.jar in my classpath. Can any one tell me what's wrong.
Error initializing data-source 'jdbc/topup': DriverManagerDataSource driver 'org.gjt.mm.mysql.Driver' not found

Yes you can forward requests from your own apache to the iAS. This can be done using mod_proxy. Some hints about how to do this are availlable on this forum.
mod_oc4j is not a standard apache module, and therefore is not availlable when you download apache. There is no apparent reason to use mod_oc4j on a "regular" webserver (unless you want to build your own iAS). Also there might be some licenseing issues with using mod_oc4j module on a standard apache.
You can encrypt data that is passed from a random Apache to you iAS.

Can I use SCC-DI01 modules with a PCI-6533 device?

I am looking into performing buffered acquisition of various digital signals using a PCI-6533 device. Can I use SCC-DI01 modules with this device? If so, would this be via the SC-2345 Carrier? The manual seemed to suggest is was only compatible with E-series devices?
Basically, I want to monitor 32 digital channels and will have a mixture of 5V and 24V signals.
Many thanks,
Douglas

Hi Douglas
Could you please clarify where the manual suggests that the module is only compatible with an E series board (is it because only an E series board is referenced in the manual)?
I can't find any information stating which devices are/aren't supported by the SCC-DI01, but I will continue to investigate and keep you posted with my progress.
Kind Regards
Stuart R

Why i can't use apple app store with my apple id?

Dear All,
why i can't use apple app store with my apple id?
but I don't have Credit Card.My Country doesn't support.
My Country is included in Apple OS X (10.9.2) but not in the billing.
How could I download even free apps from Apple Apps store without using credit info?
becoz I want to fill these brackets but iTune say me to fill it how can I?.........
                                                                           Best Regards,
                                                                            destar77

http://support.apple.com/kb/ht2534

HT1349 I have been using an app ( cheat with words qith friends) that I have been using for a long time. One day it just won't read the screen shot. It still works on my iPhone Please help!! The trouble is on my iPad. Thank you!!I

I have been using an app cheat with friends with my iPad for a long time. One day it just stopped reading the screen shot. I have tried deleting a few times and starting over. It works on my iPhone perfectly fine. Please help !!!!!!! Thank you

@Colin Robinson
Thanks, I did it hundreds of time!!!
Anyway here's what I did:
I'd wrote an email to Apple America, even if I'd purchased the item in Europe and the US support usually should not be involved in any European case.
They wrote me back that a European office will have call me in 48 hours.
After a couple of days I've received a call and a new iPod is coming from US...
Don't ask me if I can find any kind of logic behind it, but at least I can state that the US support has been decisive.
Thanks to everybody.

How do with connect to informix database?

how do with connect to informix database?I think use own sminformix.jar with java studio creator

Two steps:
1. Tell Creator about the Informix drivers:
Data Sources -> Edit Database Server Types -> New
Navigate to the appropriate jar files; besides sminformix.jar, you will need smbase.jar and smutil.jar. They can be found in the Java Studio Creator release, for use within the IDE.
Fill in the other parts of the dialog. I don't know what form Informix URL's take; you may need to look on the Informix site for that.
2. Create an Informix Data Source, using the newly defined Server Type.

I am having issues with connecting to the store...the page just hangs and when I run Diagnostics it states that a secure connection could not be established.

I am having issues with connecting to the store...the page just hangs and when I run Diagnostics it states that a secure connection could not be established.
I have contacted apple via email and tried all the steps they have recommended and it is still not working.
I have tried disabling my McAfee and that does not work either.
Anyone that the phone number to apple express so I don't have to keep waiting for them to email within 48 hours?
Thanks.

With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Photosmart 5510 printer model #B111A when using touchscreen apps i cannot connect to the server

Photosmart 5510 all-in-one printer, model #B111A, windows XP----i can print from the computer, but when i try to use the apps on the touchscreen i get a message error "cannot connect to the computer"

The steps below typically resolve the issue you’re experiencing:
1. Unplug the power cord from the back of the printer.
2. Unplug the power cord from the back of your router (and modem, if separate from the router).
3. Wait 20 seconds, then plug the router (and modem, if applicable) back in.
4. Wait 30 seconds, then plug the printer back in and power it on.
5. Press the ePrint button on the printer's front panel, and it should try to connect to Web Services again.
Those steps usually resolve the issue, but if it still occurs you can try setting static network info for the printer (which sometimes helps to stabilize the printer's ability to get outside of your network, to the internet):
1. Press the wireless icon at the top of the printer's screen and note the IP address.
2. Enter the IP address into the address bar of a web browser on a computer and press enter or click the browser's go button.
3. The printer status page should be opened. Click on Network at the top.
4. Click on Networking on the left.
5. Select Proxy Settings.
Note: If you are prompted for a redirect, select OK. If you receive a certificate warning, select the option that lets you continue anyway.
If you receive a Internal System Error, refresh the page until it loads the proxy settings.
6. Verify that all fields are blank. If they are not, clear them and make sure the Proxy Server requires authentication is unchecked and click apply. You should get a success message.
7. Click on Network Address (IP) on the left.
Note: If you only see IP Address Configuration and DNS Address Configuration with a yellow note, refresh the page until it loads completely.
8. Leave the IP Address Configuration as Automatic IP.
9. Change DNS Address Configuration to Manual DNS server.
10. Enter 8.8.8.8 for the Manual Preferred DNS Server and 8.8.4.4 for the Manual Alternate DNS Server.
11. Click Apply and you should get a success message.
12. Power off the printer for 30 seconds and then turn it back on to force the new settings to take effect.
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Using Intensity Shuttle Thunderbolt with Connect

I'm trying to use a Blackmagic's Desktop Video 10.3.7 (with an Intensity Shuttle Thunderbolt) with Connect and need some help. The video works quite nicely but Blackmagic tells me that their audio will not interface with Connect. Does anyone have experience using an Intensity Shuttle and/or Blackmagic Desktop Video 10.3.7? Has anyone discovered a work around to get Connect to see this audio?
If not, can anyone recommend an external capture device that will accept an SD composite NTSC video and RCA audio signals and get them into Connect?
Thanks in advance.

James, you have a fairly unique usecase, and most users of Connect don't have access to Blackmagic products. So long as the computer will recognize the input, Connect should accept it. When you use the Audio set up wizard, does it show the device as an option for audio input devices?
Have you tried something like these? Amazon.com: RCA to USB or Amazon.com: RCA to HDMI? They may require using DVdriver on a Windows computer, but that is pretty cheap too.

Security issues with connecting pdf to database

I have a pdf form that is being called from a webform as part
of a web application. The PDF has two dropdown lists that I was
populating from a SQL Server Database. I had created a special user
that had select access only to the tables for the dropdowns.
My question is are there any known security issues with
regard to allowing a pdf to connect to a database this way. The PDF
is being called from a secure connection but I don't know if
opening this database connection to populate these dropdowns
exposes a security hole of any sort. If it does, do you have a
solution to make this secure? I am asking because another developer
on the project brought up the issue of this design creating a
security risk and I haven't been able to find anything online
discussing it either way.
Thanks!
Maureen

Hello Maureen,
Thanks for posting, but I'm not sure I see if your question
relates to Acrobat.com
Are you using any of the Acrobat.com Services as any part of
your workflow?
Thanks!
Pete

Is it possible to use Oracle Forms 10g with Oracle 10g Lite Database?

Hi All,
We are in process of migrating our forms from 6i to 10g environment.
We have two kinds of applications, one set run on general Oracle 11g database and the other set of forms run at the client machine using Oracle lite database.
We dont have any problem with Forms 6i to connect to Lite database as it allows to connect through ODBC:DSN names. When we try to connect to a lite database (10gR3) from Forms 10g through ODBC/DSN, it's not allowing and throwing the below error.
ORA-03121 : no interface driver connected - function not performed
Can someone tell me if there is something wrong in our approach? Also advise how to use Oracle Lite database with Forms 10G.
Sincerely,
Praveen Manthena

Hi,
I have experience with 6i with lite database 10g. There are two version of lite database one is multi language support and other one in english. There lang problem in connectivity with multi language 10g lite database. I done connectivity with single language connectivity of 6i with 10g lite database. You should try this one with forms 10g.
Regards,
Naveed Ali

Using jdk1.3.1 and connecting to oracle database

The following is my program of servlet connecting to database and viewing the data from table,
I am getting an error of SQLException caught which i wrote in my second catch block.I didn't understand what to do.Is that i have to download jdbc seperately with jdk1.3.1 or it is there in the kit.Please give me reply.I also created my dsn ,i have my odbc loaded in my pc.
Thanks
import java.io.*;
import java.sql.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class EmpServlet extends HttpServlet
public void init(ServletConfig sc) throws ServletException
     super.init(sc);
public void doGet(HttpServletRequest req, HttpServletResponse res) throws ServletException,
IOException
     Connection con=null;
     Statement st=null;
     ResultSet rs=null;
res.setContentType("text/html");
PrintWriter out=res.getWriter();
try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
con=DriverManager.getConnection("jdbc:odbc:plk","scott","tiger");
st=con.createStatement();
rs=st.executeQuery("select uname,upwd from userinfo");
out.println("<html><title>empservlet</title>");
out.println("<body>");
out.println("<ul>");
while(rs.next())
out.println("<Li>" rs.getString("uname") " " + rs.getString("upwd"));
out.println("</ul>");
out.println("</body></html>");
catch(ClassNotFoundException e)
          out.println("could not load database driver");
catch(SQLException se)
          out.println("sql exception caught");
finally
     con.close();
}

Instead of using the odbc driver to connect to the Oracle server, why don't you use the JDBC driver from Oracle?
By using the ODBC driver, you need to configure two things in addition to your Java program - ODBC setup (to setup the DSN) and also the SQLnet (to connect to the oracle server).
However, with the Oracle JDBC thin client, you just have to configure in your java program.
I hope this helps.

Use 2 App modules with connection to 2 databases on 1 UIX page?

Similar Messages

Maybe you are looking for