Use 2 Data Acquisiton Cards at the same time

We are using PXI chasis for developing a test system. We want to use one card (PCI 6713) for analog output to the unit under test (UUT)and want to use the Dig I/O card to capture the response of the Device under test. currently i have two separate VIs for outputting data to UUT and for capturing response.
can someone suggest a method to integrate this function in one VI. This way we could capture the real time response while the test stimulus is being sent to the UUT.
Thanks

Hello Shabu,
Thank you for contacting National Instruments.
To obtain real-time response while the test stimulus is being sent to the unit under test (UUT), you should place a single point Analog Output (AO) and Digital Input (DI) in the same while loop. In this configuration, you will be sending an AO to the UUT and reading the resulting DI for each iteration.
If this doesn�t solve your problem, please respond with more information. I would also be happy to take a look at your existing code and offer further ideas.
Have a great day.
Sean C.
Applications Engineer
National Instruments

Similar Messages

  • How can I use OnBoard+Aditional audio cards at the same time? !!! BIOS PROBLEM !!!

    I want use both audio cards. The On-board audio + SoundBlaster Audigy. Because I have mp3 player mp3tunes ( from http://www.mp3tunes.nl ) that is able play on both audiocards at the same time. It is good for DJ. One audiocard is for pre-listen.
     But in BIOS is possible set only disable or auto-detect.   When I set autodetect, then OnBoard audiocard is automaticaly disabled if there is another audiocard.  Please tell me, what can I do for enable both audiocards ?

    It's been awhile but as I promised here is my update:
    I purchased an E-MU 1820m Pro Audio interface several months ago and ran it in my system for some time with the onboard audio disabled. Since this audio system is mainly for mid/high end audio production making use of low latency and up to 192mhz sample rates & 20/18 i/o then it is a bit of an overkill for using it for general multimedia & games so I thought I would place my c-media pci card back in and enable the onboard setting & see if the two systems would run ok together.
    I first made sure that I uninstalled the e-mu card & then put the onboard card back in & installed the drivers. I then installed the E-MU, making sure that it wasn't sharing an IRQ with my 9600 pro like it originaly did on the first slot. So after installing that and the IRQ's were looking good I tested it all out and the results after two weeks have been perfect. I use the C-Media audio with the WDM drivers and use it for general audio & multimedia while I use the E-MU card with the E-MU ASIO 2 drivers and I use this with my audio production programs like Sonar, FL Studio & native Instruments Battery & Traktor.
    Conclusion: Yes you can run a pro audio system as well as the onboard sound card with the MSI 865 Neo2 FIS2R.

  • I cannot use data and voice at the same time.

    I cannot use data and voice at the same time.
    I am on Wifi (connected) and at the same time I am on a voice call. when I switch to my RSS feed reader it does not sync it comes out with a message cannot connect to internet, I thought it is a problem with the feed reader application, IE 10 behaves the same I cannot browse when I am on a voice call.
    This is a very basic issue, am I missing something? Please help.
    My Model is lumia 820 with the latest portico update.
    TIA
    Sandeep

    I am aware that packet data via EDGE and voice cannot happen at the same time, surprisingly when I am on voice call I cannot connect to internet via Wifi too

  • Importing more than one Memory Card at the same time

    As a productivity tool for professionnals, Lightroom should allow us to import from more than one source at the same time, as Aperture do.  I have a multiple Flash Card reader, and we cannot import all of them at the same time in Lightroom...
    I know that I can copy them in a folder, then importing them in LR...  But this is time and space consuming  if I want to convert the file in DNG : it's okay if photography is a hobby for you, but when it's your full time job, and  you often import 4 16Gb Compact Flash Cards at the same time, you don't want to waste time to wait the copying process on your hard disk, and then   wait for the "import  and convert to DNG" process : this process require to duplicate the files : RAW to DNG on the same hard disk, instead of Direct copy and convert to DNG from your memory cards to your Hard Disk.

    You can have multiple remotes for one ATV, and one remote for multiple ATVs.
    In our house we have two iPhones and one iPod iPod Touch, all able to control the same ATV at the same time (much to the delight of my daughter who enjoys ousting my music choices for her own).
    Why have iPod touch in each room? Its not a wired remote - its a mobile device. Think of a landline vs mobile telephone - landlines are one per room, mobiles are one per person - that's how an iPod is used, even as a remote - you take it with you.
    Just like a mobile phone, you'd have one personalised iPod Touch or iPhone per person, not per ATV or room.

  • Slatebook x2 - USB flash and SD card at the same time

    Hello, after almost two years of using this device I had a situation when I wanted to connect USB flash drive and a SD card at the same time (I wanted to copy files from SD to the USB flash drive). I connected the SD card (standard size) to the keyboard module. It was mounted OK. Then I connected the USB flash drive to the keyboard module. This was not mounted at all (no error message). When I dismounted the SD from storage menu then the USB flash drive was mounted automatically. I tried various orders of connecting the devices. I managed to get them work at the same time but then suddenly the USB drive was dismounted. I did not try to perform factory reset (please do not ask this for every issue, I have quite apps, files and settings on the device). It does not matter if the Slatebook is connected to power source. The Slatebook software is fully updated.note: The USB flash drive and the SD card works without any problem when only one of them is connected. Does anyone use SD card and USB flash drive at the same drive? Does it work for you?

    Audio Hijack Pro <http://www.rogueamoeba.com/audiohijackpro/> lets you take the audio output from any application and add multiple effects. Using the "Auxiliary Device Output" effect will send the audio to more than one device.

  • Hi, i am wondering if i use 4g together with wifi in the same time will this increase the internet speed ?

    Hi, i am wondering if i use 4g together with wifi in the same time will this increase the internet speed ?

    The iPad has a micro-SIM card slot - nothing special or unique about it.
    The iPad is not sold as carrier locked.

  • 2 differents graphic cards at the same time for Mercury engine

    Hi !
    I'm working on 4K footage (R3D) with CS6 Premiere and Blackmagic Resolve, on a 6-cores i7-3930K (without integrated graphic card inside the CPU).
    I decided to buy 2 graphic card, because Resolve "need" one simple graphic card for the software interface (GT610 1Gb with 48 CUDA cores),
    and one strongest for the calculation (GTX680 4Gb with 1536 CUDA cores).
    So I'd like to know if Premiere is like Resolve and if it will use the dumb card for the software, and the second for the CUDA engine inside MPE ?
    Or will it use the 2 cards at the same time, like 48 + 1536 = 1584 CUDA cores ?
    Or will it use only one of those 2 card ? And in this case, how can I chose the right one ?
    (modify a configuration file, or put the strongest card in the first PCI slot in exemple ?)
    Thanks for your help.  ; )

    Thank you John !
    Ok, I read those thread... so, to summarize (and to be sure I understood everything) :
    1) Premiere don't work with 2 GPU at the same time (no SLI / no 2x graphic card "alone").
    2) I need to install the strongest graphic card (used in MPE) in slot 1, and the second graphic card (connected to my DVI displays) in slot 2.
    3) I have to be really careful with drivers (but it's the same manufacturer, EVGA, and the same line, GT and GTX, so I don't think there will be problems)
    and if I have problems, just need to desactivate the CUDA processing (in the drivers panel) of the card just used for the displays.
    Can you just confirm me I'm right ?
    (And, about Resolve, I saw the same slot configuration on the manual, so I hope everything will work :  )
    MAC PRO SLOT CONFIGURATION Optimum two GPU configuration
    Slot                    Board                                            Function
    4                        HBA or RAID card                          Storage interface
    3                        Capture card                                  Video & audio I/O
    2                        Single width GPU                          GPU for GUI
    1                        Single or double width GPU          GPU for image processing

  • Can you use sync on multiple computers at the same time? ie have someone else logged into your firefox account for you whilst you are also logged in

    I am trying to sign up to something but there is only a short window so was going to ask a friend to sign in at the same time using my account to try to sign up (with my password being saved into my firefox account)

    Hi. Yes, you can use Sync on multiple devices at the same time. I use it to keep my bookmarks in sync across my desktop and Android versions of Firefox.

  • Can we use both INSERT and UPDATE at the same time in JDBC Receiver

    Hi All,
    I would like to know is it possible to use both INSERT and UPDATE at the same time in one interface because I have a requirement in which I have to perform both the task.
    user send the file which contains both new and old record and I need to save those in MS SQL database.
    If the record exist then use UPDATE otherwise use INSERT.
    I looked on sdn but didn't find any blog which perform both the things at the same time.
    Interface Requirement
    FILE -
    > PI -
    > JDBC(INSERT & UPDATE)
    I am thinking to use JDBC Lookup but not sure if it good to use for bulk record.
    Can somebody please suggest me something or send me the link of any blog or anything to solve this problem.
    Thanks,

    Hi ,
              If I have understood properly the scenario properly,you are not performing insert and update together. As you posted
    "If the record exist then use UPDATE otherwise use INSERT."
    Thus you are performing either an insert or an update which depends on outcome of a search if the records already exist in database or not. Obviously to search the tables you need " select * from ...  where ...." query. If your query returns some results you proceed with update since this means there are some old records already in database. If your query returns no rows  you proceed with "insert into tablename....." since there are no old records present in database.
      Now perhaps the best method to do the searching, taking a decision to insert or update, and finally insert or update operation is to be done by a stored procedure in MS SQL database.  A stored procedure is a subroutine available to applications accessing a relational database system. Here the application is PI server.   If you need further help on how to write and call stored procedure in MS SQL you can look into these links
    http://www.daniweb.com/web-development/databases/ms-sql/threads/146829
    http://www.sqlteam.com/article/stored-procedures-parameters-inserts-and-updates
    [ This part you can ignore, Since its not sure that you will face this situation
        Still you might face some problems while your scenario runs. Lets consider this scenario, after the stored procedure searches the database it found no rows. Thus you proceed with an insert operation. If your database table is being accessed by multiple applications (or users) other than yours then it is very well possible that after the search operation completed with a null result, an insert/update operation has been performed by some other application with the same primary key. Now when you are trying to insert another row with same primary key you get an error message like "duplicate entry not possible for same primary key value". Thus you need to be careful in this respect. MS SQL has a feature called "exclusive locks ". Look into these links for more details on the subject
    http://msdn.microsoft.com/en-us/library/aa213039(v=sql.80).aspx
    http://www.mssqlcity.com/Articles/Adm/SQL70Locks.htm
    http://www.faqs.org/docs/ppbook/r27479.htm
    http://msdn.microsoft.com/en-US/library/ms187373.aspx
    http://msdn.microsoft.com/en-US/library/ms173763.aspx
    http://msdn.microsoft.com/en-us/library/e7z8d5hf(v=vs.80).aspx
    http://mssqlserver.wordpress.com/2006/11/08/locks-in-sql/
    http://www.mollerus.net/tom/blog/2008/03/using_mssqls_nolock_for_faster_queries.html
        There must be other methods to avoid this problem. But the point is you need to be sure that all access to database for insert/update operations are isolated.
    regards
    Anupam

  • Can I use my creative cloud account at the same time for my iMac and my MacBook?

    Can I use my creative cloud account at the same time for my iMac and my MacBook?

    Thank you Sheena!!
    Guy
    Op 2-jan.-2015, om 12:16 heeft Sheena Kaul <[email protected]> het volgende geschreven:
    Can I use my creative cloud account at the same time for my iMac and my MacBook?
    created by Sheena Kaul <https://forums.adobe.com/people/Sheena+Kaul> in Adobe Creative Cloud - View the full discussion <https://forums.adobe.com/message/7059158#7059158>
    Hi Guy Heyligen,
    Absolutely. You can use the creative cloud account on two machines.
    You may also refer to the link below:
    Creative Cloud Help | Creative Cloud / Common Questions <http://helpx.adobe.com/creative-cloud/faq.html>
    Regards,
    Sheena
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7059158#7059158 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7059158#7059158
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Adobe Creative Cloud by email <mailto:[email protected].com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=46 70>
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

  • Low memory when using programs like iPhoto, office at the same time I have 4 GB ram

    low memory when using programs like iPhoto, office at the same time I have 4 GB memory ram 3000 graphics 384 mb

    Do you have a question?

  • MacBook Pro Freezes while using more than two applications at the same time

    Over the last two weeks my MBP has been freezing every time i use two or more applications at the same time. For e.g. my whole system freezes from time to time when i use itunes and safari at the same time. This problem never existed before and has just started recently and is really annoying. What can i do to fix it?

    Rather than re-installing Safari have you tried simply "Resetting" it (head to "Reset safari" under the "Safari" menu). It is possible that something in your user folder that supports Safari is really the cause of the problem. Re-installing Safari won't deal with this, but re-setting it can.
    In fact the first thing you should try is simply choosing "Empty cache..". If your cache files are corrupted then this in itself could explain the behaviour.
    If you choose to do the Reset first try it with just "Empty cache" and "remove all website icons" selected. This will reduce the amount that you will "lose" in the process. (Cookies, history, etc). Add in additional options if the first attempt doesn't fix it.
    Cheers
    Rod

  • Can i use 2 channel of USRP at the same time to receive a signal?

    Hi everyone,
    i want to do an implementation of time difference of arrival estimation between two receivers (antenna). I have an USRP  kit, daughterboards and two antennas. There is only one source signal ( it is transmitted in anywhere it doesnt matter).
    Can i use two channel of USRP at the same time to receive  a signal ?
    I need the original source signal and time-shifted version of this signal. 
    Many thanks for your help.
    Sincerely yours,
    Uysal.
    Solved!
    Go to Solution.

    Hello,
    I found this forum post which may be helpful to you.  It looks like you can't receive from the two antennae in the way that you describe.  I think this would require a two USRP setup.
    Jon F.
    Applications Engineer
    National Instruments

  • I have a macPro 10.6.8. i have been receiving mail with the same date--March 14 and the same time--8:51am..I cannot correct:who knows the solution?

    I have a macPro 10.6.8. i have been receiving mail with the same date--March 14 and the same time--8:51am..I cannot correct:who knows the solution?
    Thank you.

    You may need to replace the Pram battery.

  • It is possible to charge an iPad3 over USB and transmit data over USB at the same time?

    Hello,
    it is possible to charge an iPad3 over USB and transmit data over USB at the same time?
    If yes, how?
    Thanks
    Best regards

    OK!?
    That is right that the USB data oins are not connected to +5V pin.
    But i found a description for a self built power supply for iPad.
    http://timothyb.net/DIY_iPad_2_USB_Charger.html
    and
    https://www.mikrocontroller.net/topic/262610?goto=2726627#2726627
    The description say: data pin D- need a voltage level of 2V and D+ 2,857V
    when the data pins have this special voltage levels and VCC has +5V only then the iPad is charging.
    The voltage "D+/D- coding" is the key for the iPad to charge.
    OK now back to my problem.
    The regular USB data pin voltage level is 0,3 - 3.,0 voltage. When the iPad is charging the data pins have this special voltage level. Now i try to transmit data over the usb data pins with the. Normaly the USB port transmit the data with a voltage level of max. 3V.
    And here my problem. The higher voltage level at the data pins cares therefor that the iPad stop the charging.
    Is that correct?

Maybe you are looking for

  • How do I have 2 iPhones on one computer without sharing info

    My daughter just got the new iphone.  When I connected to my itunes to update and put music for her it took all my info, email, music, contacts, calendar etc... I'm sure it's a simple fix.  Help!

  • What is time machine for?

    Hi I'm new to mac and was wondering if someone could tell me what its good for. is it just a program that helps backup my computer?

  • How to display a message on status bar while an LOV is active?

    Hi, Can any suggest me that how can I display my custom message on the status bar of my form, while an LOV is displayed on the screen. I populate an LOV in an Item in the form. I need my status bar to display a message while my LOV is Displayed and a

  • SQL PERFORMANCE SQL ANALYZER of 11g

    I am using 11g on Windows 2000, I want run SQL PERFORMANCE ANALYZER to see the impact of parameter change on some sql's. Currently, I am using it in a test environment, but eventually I want to apply t to production environment. Let us say I want to

  • Best practice to create users - Hybrid scenario

    I would like to know what is the best practice for creating new users in a Hybrid scenario with all mailboxes hosted and no mailboxes on-premise. Currently when creating a new user we go to our local EMC and create a 'New Remote Mailbox'.  This creat