Use 2 subscriptions to the same country

hi,
I bought the 400 min subscription to israel witch is which is the highest subscriptions to cell phones and landline.
i bought another subscription of 400 min just for landline in order to use this one just for landlines but apparently also for landline skype is using just my 400 min subscription of cell phone.
How can i change it?
thanks

Hello Andre,
ok. Ive not realized that I should ve actually purchased a different amount of minutes, so I would be able to use those minutes right away. Thats what I actually wanted.
But I think I have another problem now.
Just to remind:
Subscription 1) On 16th of July I ve purchased one year of 400 Min to Brasil. Cause Ive payed it all at once I got 520 Min/month. This Subscription should end on 16th of August 2012. 
Subscription 2) On 3rd of September comes the mentioned event. Ive purchased a second 400 Min/month subscription, and Ive paid for one month EUR 5,99.
Today is the 16th of September. It appears just one subscription for me, and Ive just cancelled it. The problem is, it appears for me 400 min available and end of the subscription 16th of of August 2012.
That means Ive paid extra EUR5,99 for nothing, and instead of 520 min, I ve now just 400 min!!!!!! 
If I understood what u answered me, my second subscription should actually only be activated on 16th of August 2012 until 16th of September 2012 (only one month - cause I just cancelled it) and set for this period of one month: 400 min. Until 16th of August 2012, including now, I should have my 520 min/month back??? Or??? 
Thanks,
Marcelo

Similar Messages

  • 2 Subscriptions to the same Country

    Hello,
    Ive read in the FAQ that it is possible to have more than one subscription to the same land.
    Thats what Ive tried to do.
    On 16th of July Ive purchased a 12 months subscription Brasil 400 min. Because I bought it for 12 months I get 520 min per month.
    On 3rd of September I got a second subscription, because my credits of the first and up mentioned subscription were about to end.
    I have not yet been able to use my credits of the second subscription.
    Why not????
    Regards,
    marcelo_kipper

    Hello Andre,
    ok. Ive not realized that I should ve actually purchased a different amount of minutes, so I would be able to use those minutes right away. Thats what I actually wanted.
    But I think I have another problem now.
    Just to remind:
    Subscription 1) On 16th of July I ve purchased one year of 400 Min to Brasil. Cause Ive payed it all at once I got 520 Min/month. This Subscription should end on 16th of August 2012. 
    Subscription 2) On 3rd of September comes the mentioned event. Ive purchased a second 400 Min/month subscription, and Ive paid for one month EUR 5,99.
    Today is the 16th of September. It appears just one subscription for me, and Ive just cancelled it. The problem is, it appears for me 400 min available and end of the subscription 16th of of August 2012.
    That means Ive paid extra EUR5,99 for nothing, and instead of 520 min, I ve now just 400 min!!!!!! 
    If I understood what u answered me, my second subscription should actually only be activated on 16th of August 2012 until 16th of September 2012 (only one month - cause I just cancelled it) and set for this period of one month: 400 min. Until 16th of August 2012, including now, I should have my 520 min/month back??? Or??? 
    Thanks,
    Marcelo

  • Multiple subscription types to the same country

    I have two existing subscriptions - one is unlimited calls to USA and canada- never a problem with that- BUT I also have family in Honduras and a couple of months ago started subscribing to the 120 minutes per month plan for honduras- its a lower price than I have been able to find anywhere.  well I always go over the 120 minutes and eat into my regular skype balance-  then this morning I was inquiring if I could just buy TWO subscriptions to Honduras (Two 120 minute) in my research I discovered this was possible and I went ahead and purchased a second subscription for Honduras.  Later today my first subscription had been completely used and I thought the second subscription would kick in but it still took the money from my regular account- I went back and verified that my subscription appears to be in place but not sure WHY it was not used today--  do they all start on the same day?  do I have to wait until next month to have the full benefit of two subscriptions?  can you reply to my email maybe?  thanks fd

    Thanks for the response. While I do not dispute what is in the manual, this is not what I observed on my account. Perhaps, the system does not comply with the manual. A system defect perhaps?  I would urge you to try it yourself.  Here are the steps, if you want to try to reproduce:1. Buy the more expensive 'Mobiles & Landlines' subscription first. The country that I used was South Africa.2. Buy a 'Landlines only' subscription to the same country. Note that you will get a warning screen telling you that you are buying mulitple subscriptions to the same country.   Choose to continue3. Make a landline call to that country4. View your account. Specifically look at the remaining minutes on your 'Mobiles & Landlines' subcription. There should be no decrease in minutes. If there was, we have ourselves a bug/defect. Anyway, I have cancelled my 'Mobiles and Landlines' subscriptions. Oh, by the way, I did notice that Skype rounds to the minute. So for a call lasting 4 minutes and 1 second, Skype will deduct a full 5 minutes from your subscription's minutes.   

  • How can I solve the problem, that an album that I have given as a present via iTunes cannot be used outside my country of origine (I live in the same country as the person that has received the present)?

    Hi iTuners, I have a problem with one of the products, which I have bought as a gift in the iTunes-Store and have let it be sent to my girlfriend. We are both living in the Netherlands, but the system doesn't allow her to download her gift, giving her back the error message "Only clients in Germany can use this voucher" - CAN YOU PLEASE HELP ME?

    She won't be able to redeem that gift unless she moves to Germany and has a German billing address on her account - all gifts are country-specific, they can only be redeemed on accounts that have the same country on them as the person sending them, and they need to be in that country to redeem it. If you've been charged for the gift then you can try contacting iTunes Support and see if they will refund or credit you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
    As you are in Netherlands then you need to update your country and billing address (and payment method if you are using a German credit card) on your account to be your Netherlands address - a store's terms of use state that you need to be in the country to use its store. You can update the details on your account via the Store > View Account menu option on your computer's iTunes

  • HCM Absence  types- need to display in different languages in the same country based on user language preference

    Hi
    We are implementing in Belgium where we need to have absence in both dutch and French for the different user sets. Is there anyway to set up one absence type but have the different translations for the different user groups.  There was a document ID 1619320.1 that referred to the fact that if the absences were created  by a seedfile then they would be translated. Has anyone come across this issue whereyou need to display the same absence type for more than one language in the same country and how did you do this or did you have to set up separate absence types in the different languages which I do not want to do
    thanks

    Hi Parker
    If you are using Captivate 4 multi languages is a
    posibility..
    Set a User Variable to pass the language you want to a Flash
    SWF whic is embeded (This can play and hold multiple audio tracks).
    For example Captivate 4 will pass "french" to the embeded flash SWF
    which will play the "french" track.
    OR
    you could just use branching ;)
    Cheers.. Aquil0

  • Disable roaming data not works (in the same country)

    iPhone 2.1
    if disable roaming data and your carrier allows to connect to another carrier in the same country (for voice services) your iPhone continue to connect with the other carrier, even if you've disabled roaming data.
    that needs to be fixed as soon as possible ...
    i've spent a lot of money thinking that disable roaming data works also in the same country and not only abroad

    They should then add this features, a lot of people are in the same boat ... and receive tremendous bill due to this lack of capabilities of iPhone to do not lock data connection only with the own carrier in the same country.
    I know that there's the possibility to use only one carrier instead of setup in automatic mode the carrier, but, as said, many carriers all over the worls allow theis customers to connect to other carriers for free ONLY for voice BUT not for data ...

  • HT4245 When I try to activate iMessage and while I write my correct password I I receive message say that my user name and password is incorrect although I was use iMessage service on the same network (etisalat ) U.A.E  before I update to ios6

    When I try to activate iMessage and while I write my correct password I I receive message say that my user name and password is incorrect although I was use iMessage service on the same network (etisalat ) U.A.E  before I update to ios6
    Note : my iPhone is been swapped 2 weeks ago and I already erase all data in old I phone

    1) Go here: http://www.apple.com/support/appleid/manage/
    2) Click on Sign in to manage your Apple ID
    3) Click on Manage your Apple ID
    4) Type in your Apple ID and Password and click Sign in
    5) Select Addresses from the left hand side
    6) Click Edit
    7) In country region type United Kingdom
    8) Click Save at the bottom of the page
    9) Go to your Apple Device Settings - General - International - Region Format - Select United Kingdom
    10) Press the Home button
    11) Log into Facetime and iMessage with your CORRECT APPLE ID AND PASSWORD
    This should work for all of you guys. Hope it helps.

  • Hello, Is there a package deal for 2 people to use Creative Cloud tat the same time? (Photoshop, DW, Illustrator, etc) we already have one subscriber.

    Hello, Is there a package deal for 2 people to use Creative Cloud tat the same time? (Photoshop, DW, Illustrator, etc) we already have one subscriber.

    Hi there
    You could either sign up for another individual subscription for the 2nd user, or consider a Teams account which is priced per user - Creative Cloud pricing and membership plans | Adobe Creative Cloud
    Thanks
    Bev

  • Hi,  If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)?  When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possi

    Hi,  If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)?  When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possible?  Thanks

    Yes. Yes. Yes.
    Mylenium

  • Can I use multiple iPhones on the same iTunes account? e.g. my wife and I each have iPhones

    can I use multiple iPhones on the same iTunes account? e.g. my wife and I each have iPhones

    Yes, you can have as many devices - iPhones, iPods, iPads - as you like using the same iTunes account.

  • Using a hybrid of the same apple ID for iPad and iPhone.

    Hey everyone,
    I'd like to be clear and hopefully someone can give me an accurate response as soon as possible.
    So, today my sister gave birth (Hurrah!) and she has an iPad 2 that i got her for christmas.
    Long story short, my mom is in the same hospital as my sister in the emergency room since she had a heart attack/nervous attack and had to be there for testing. -- Thing is, i want her to Facetime me with an alternate email from my iCloud so she's able to see her grandson while i'm with her.
    Question:
    Yes, or No: Can we use a hybrid of the same apple ID for both iPad and iPhone?
    (Hybrid implying the use of iMessage/Facetime with an alternate email and not my cell number or primary account email.)

    So once that's done, that'll be it?
    Cause she has one of my alternate emaisl currently listed on the iPad (and i unselected those on my iPhone) and it seems that it's not registering as an iMessage when i try to send her a message via my iPhone.

  • HT3819 I have 2 Ipod touch's, one a 64gb and one an 8gb.  Whats the best way to use them both on the same itunes account?

    I have 2 Ipod touch's, one a 64gb and one an 8gb.  Whats the best way to use them both on the same itunes account?

    Click here for options.
    (64410)

  • Use two indicators for the same variable in two different VIs

    hello, I want to use two indicators for the same variable in two different VIs running at the same time
    should I use global variables?? I want to avoid because I have lot of variables and it would takes too much memory,I tried with this code but the value of the second indicator is not updated 
    I tried to use the queue and it works but the problem is as i said previously that i have many variables shoud I use a queue for each one??
    what should I do?
    thank you in advance
    cordialy
    Attachments:
    projet.zip ‏13 KB

    CrisSTine01 wrote:
    hello, I want to use two indicators for the same variable in two different VIs running at the same time
    I'm a huge fan of User Events to send updates to GUIs from who knows where.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • How do i set up a second display for my iMac desktop?  I want to use both displays at the same time.

    how do i set up a second display for my iMac desktop?  I want to use both displays at the same time.  My iMac is the 24" Late 2006 model.  I recall that there is a cord for plugging in a second monitor, but I want to make sure that i can use both monitors side-by-side at the same time.  thank you.

    If the Display supports DVI, then you will need a > Mini-DVI to DVI Adapter and a DVI cable.
    If the Display only supports VGA, then you wiil need a > Mini DVI to VGA Adapter and a VGA cable.
    Noting that the (digital) DVI is far better than the (analog) VGA connection.
    Also see > Using Dual Displays on Mac OS X: The Experience

  • Use multiple themes in the same project?

    I'm making a slideshow in iMovie 09. It consists of approx. 200 pictures. Those 200 pics are then broken down into 5 distinct groups. I've applied the Scrapbook theme to the first 40 pictures. I tried to apply a different theme (Filmstrip) to the next 30 pictures. When I did that, however, it changed the theme for the original 40 pictures to Filmstrip as well.
    Am I able to use multiple themes within the same project? I don't think its possible.
    Is my solution to make the 5 sections of the slideshow in iMovie 09 using a different theme for each section? I'd export as a movie file and then create the final slideshow that would consist of the 5 movies previously made (each with a different theme).
    Thanks in advance. This project is due in 3 weeks.
    Martin

    This is not possible in iMovie (to use multiple themes).
    However, you can do this using your idea of joining multiple movies into one. You can do this with QuickTime Pro, or with MPEG Streamclip. [Here is a video Tutorial by venerable forum member Jon Walker|http://web.me.com/jrwalker4/QuickNotes/MPEGStreamclip/Entries/2008/5/25_Tutorial015.html] which shows the MPEG Streamclip option.

Maybe you are looking for

  • Parsing an input parameter for the where clause or record select value

    In my limited CR experience, I've always used a command database connection so that I can write my own SQL.  However, now I have to parse a  pipe delimited parameter to get my value for the where clause, so I'm selecting several tables and joining th

  • Graph Dynamic Row Labels

    Hi, I am creating a stacked bar graph that contains 7 row lables. The row labels are represented on seperate columns in the underlying table and I would like to dynamically select the row labels & count(values) instead of specifying 7 rowlabels due t

  • A additional column is appearing in the bom display transaction

    Dear Expert, I am facing a unique situation .Recently my system has gone through EHP 5 upgradation.When i am displaying the production bom for a particular material in your Quality client , i can view a additional column in the  GENERAL ITEM OVERVIEW

  • PReq price copy to PO

    Hi MM experts, I am getting the message "No conditions determined (no authorization for input)" when I copy my PReq to my PO. In my PReq, I have entered a price for a material for which a value has not been defined in MM-Accounting view. In my pricin

  • Oracle 10g Lite Review

    Hello, It seems there are a lot of folks out there who have successfully implemented Oracle Lite solutions for their remote users and leverage database snapshot replications. Can anyone please share their input about this product from implementation/