Use 3G adapter with 5G ipod?

I have an old power adapter that came with my 3G ipod (four buttons across and click wheel). Can I use it to charge my 5G ipod? The wire it came with has a dock connector on one end and the end that plugs into the adapter is not like a USB, not sure what it is... Help would be most appreciated!

The other end of that 3G cable is Firewire 400.
Yes, you can use that cable and the power adaptor to charge your 5G iPod, but you can't use it to sync your iPod with your computer.

Similar Messages

  • Can i use wireless earbuds with my ipod nano 6th. if yes how do i do it ?

    can i use wireless earbuds with my iPod nano 6th generation ?  If yes, tell me how to do it. Thank you

    You will need this: http://www.amazon.com/KOKKIA-MULTI-STREAM-multi-stream-authentication-Capabiliti es/dp/B004I408OW/ref=sr_1_1?ie=UTF8&qid=1405309396&sr=8-1&keywords=bluetooth+ipo d+adaptor

  • Problem with Send using JMS Adapter with Websphere MQ

    Hi,
    We have two scenarios using JMS Adapter with MQ:
    1. File->PI->MQ
    This works fine and drop the file in MQ correctly.
    2. MQ->PI->File
    This gives an error reading from the queue: (see highlighted in the log below). It correctly connects to the queue name. But it fails with the message "Could not begin a AF transaction".
    Our PI version is 7.0 SP 13
    Websphere MQ Version 6.0.
    Any idea what could be wrong?
      Cluster Node  Administration Information  Availability Times
    Cluster Node Details for Channel CC_JMS_MQ_Sender
    Short Log 
    In the Last 4 Hours Server 0 15_92786
    _Sucessfully connected to destination 'queue:///MMPP.PLM.FGH41? CCSID=37&targetClient=1'_
       Line 1 / 1
    Processing Details for Cluster Node Server 0 15_92786
    Type 
    Time Stamp 
    Message ID 
    Explanation 
    9/2/08 2:27:28 PM 2e6206f0-7925-11dd-bc02-0003bae50b4d Error while processing message '2e6206f0-7925-11dd-bc02-0003bae50b4d';  _detailed error description: com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: Could not begin a AF transaction: TxManagerException: Unable to open transaction: com.sap.engine.services.ts.exceptions.BaseSystemException at com.sap.aii.adapter.jms.core.channel.filter.TxManagerFilter.filterSend(TxManagerFilter.java:103) ..._  
    9/2/08 2:27:28 PM 2e6206f0-7925-11dd-bc02-0003bae50b4d XI message ID corresponding to JMS message with ID 'ID:414d512071736431202020202020202047d9462024028b02' will be created as a new GUID with value '2e6206f0-7925-11dd-bc02-0003bae50b4d'
    Amith Dharmasiri

    Checked the drivers installed in :
    /usr/sap/<SID>/DVEBMGS<SYSNO>
    /j2ee/cluster/server0/bin/ext/com.sap
    .aii.af.jmsproviderlib
    They are available and properly added to aii_af_jmsproviderlib.sda.
    The drivers are:
    CL3Export.jar
    CL3Nonexport.jar
    com.ibm.mq.jar
    com.ibm.mqjms.jar
    connector.jar
    dhbcore.jar
    rmm.jar
    These were installed per OSS note 747601.
    Any other suggestions, why retrieving from MQ doesn't work?

  • How to use File Adapter with hierarchial Structure?

    Hi,
    How to use File Adapter with hierarchial Structure like..
    Data:
    --Header Details:
    Line Item Details:
    Data
    Bcoz I am getting a Flatfile in a hierarchial way as shown below.
    Header Details :1
    Line Item a
    Line Item b
    Header Details :2
    Line Item c
    Line Item d
    Kishore

    Hey Kishore,
    In order to create a structure you need to use the file with convertion mode on the sending communication channel of the file adapter.
    check the link for the needed configuration paramters.
    If the structure is more complexed you can use the Contetnt master(CM) from itemfield which allows to ceate XML file from complex flat files and more.
    <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm">File sender adapter</a>
    If you have any question i'll be more than happy to assist.
    Nimrod Gisis

  • I'm using the remote with my iPod connected to iTunes why can't I search playlists on the iPod? It only lets me search playlists in iTunes

    I'm using the remote with my iPod connected to iTunes why can't I search playlists on the iPod? It only lets me search playlists in iTunes and only let's me see the current playlist on the iPod only

    You can only sync to one computer.
    You would have to transfer purchases, but the apple ID would need to be the same.
    Or find a 3rd party app to transfer content.

  • Can I use an adapter with the output stats: 5.2 volt and 1.0 amp for my iPod Touch 4g?

    Hello, I bought an iPod touch from apple store. I got the cable with one part to the iPod and the other USB. But i didn't get an adapter to make it possible to connect the USB to an adapter and then into the wall jack.
    So I had one at home with these stats: 5.2 volt and 1.0 amp. Can I use it to charge the iPod Touch or is it "unhealthy" for the battery?
    Kind Regards
    Kiwiii

    It shuld be fine. It is within the tolerance for USB 5 Volts.

  • Using old AC adapter with 5G iPod

    I wouldn't think there's a problem with this, but just to be on the safe side, is there any danger in using my old firewire cable and AC adapter with the new iPod? I hate using the computer to charge it, and I've already got two of the old adapters.

    It'll work fine. You just can't sync with firewire

  • ITunes Remote used to work with my iPod Touch...now not so much!

    Hello.
    I was using iTunes Remote on my iPod Touch a couple of weeks ago with no problem. Now, when I try to use it, iTunes does not seem to see the iPod via the wireless network. I'm running iTunes 9.2.1 and iOS4 on the iPod...I think I upgraded both in the last week or so, and that's when the problems started.
    Any suggestions?
    Thanks.

    If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
      Apple Retail Store - Genius Bar

  • Internet connection drops when I use Home Sharing with my iPod Touch

    Hi,
    I have two PCs (Windows 7 and Windows Vista) both with iTunes 10.2.1 and an iPod Touch with iOS 4.3.1.
    When I use iTunes' Home Sharing with my iPod Touch, that is, I stream music, podcasts, etc from either one of my PC computers to my iPod Touch, a few minutes later both laptops, as well as my iPod Touch, lose Internet connectivity. While home sharing continues, Internet connection is lost. I have to unplug my modem and wireless router to get back my Internet connection. The problem, however, recurs again and again.
    Any recommendations? Thanks in advance.
    Dave

    I am having the same problem. My MacBook, iPad, iPhone, and even the PC all lose internet connectivity;but home sharing still continues to function properly on ATV2.
    I'm not too savvy on routers and modems, but could the problem be my router's capacity?

  • Using converter/adapter with macbook extension cord'

    I'm taking my macbook to the u.k. and want to know if i can use just an adapter with the magsafe extension cord. I already have an adapter for the the magsafe cord but may need to use the extension cord as well.

    Yes you can just use a plug adapter. It will work fine either way.

  • Can I use wireless headphones with my iPod 4G and if so how?, Can I use wireless headphones with my iPod 4G and if so how?

    I am looking at be headphones but they're wireless and I was just wandering if I could use them with my iPod without wifi or any Internet connection and if so how?

    Yes, but they must use Blue Tooth. You will find many that will work.

  • RE: Rollback while using DB Adapter with toplink

    Hi All,
    I am using DB Adapter's Toplink to insert data in ms-sql table.
    In case, If I am inserting 10 records and suppose after 6 record insertion is being failed.
    Then in above scenario, Is previously inserted records would be roll backed or not?
    Is there any thing, we need to do in BPEL or this would be taken care by Top link.
    My version of BPEL: 10.1.3.4.0
    Thanks in advance.
    Regards

    Hi Pavan,
    Thanks for your response. My process is Asysc. I did one poc, tested if a data of one record is wrong, then it throwing error, and data is not being inserted in data base.
    I tested with 4 records, if data of any records is wrong, then it is not being inserted.
    Is there any other good way to handle this.
    Regards
    Edited by: vikky123 on Sep 22, 2010 8:43 PM

  • Using video clips with my ipod

    I am working on a project that requires me to use video clips on my ipod(I have a video ipod). I would like to divide each clip(about 10-20 seconds each) into approximately 10 categories. There would be about 100-200 clips in all. I would like to be able to view these clips on my ipod and that they be organized on my ipod into these 10 categories for easy browsing. The categories and the clips would ideally all have names attached to them. My question is: Is this possible, if it is, how do I go about doing this?
    Any help would be greatly appreciated.
    Thanks

    Well that would explain why you cannot add them to your Nano.
    Try using a program such as Handbrake or MPEG-Streamclip to convert these clips to more friendly formats. I have had the best results with these two utilties.
    B-rock

  • Using HTTP adapter with no namespaces

    Hi,
    Is there anyway to use HTTP adapter when the provider does not accept the namespaces. The HTTP binding wizard requires a targetnamespace to be defined in the request and response xsds that we have to use.
    Thanks & Regards
    Siva

    Bernd we are trying to do the same thing only with the soap adapter.  I'm convinced that no one really knows how to do it.  We can't even find an SAP CONSULTANT that has done it .. at any cost!
    If you hear anything good .. please let me know - my email is [email protected]
    I think the nightmare is coming in because when SAP bought the j2ee ( application server ) they never really have integrated it so it's very confusing if the settings need to be done on the ABAP side or the J2EE side via visual administrator.  In addition most Basis guys are only experienced in the ABAP side and not the J2EE.

  • Using JMS adapter with J2ee native queuing system

    Hi there,
    As far as I have understood J2EE contains it's own native queuing system (JMS). Since the J2EE is part of the WAS, shouldn't it be possible to somehow use XI's JMS adapter in conjunction with this native JMS?
    I've tried to search many places in many ways, but haven't been able to find any info. Is it possible at all?
    Hope, some of u guys can help out there:-)
    Regards,
    Daniel

    Hi Keith,
    It looks as if you are in the same situation.
    We have this working very nicely now and I'm happy to share. In fact I was just granted wiki permissions so I can add the information there along with screen shots.
    Informaiton on this configuration is very scattered but I imagine many people would find it useful for integrating with Mainframes without adding any complexity to the legacy environment. Let me come back to you with some more inormation, but for now you can get started with this:
    Insert a module as the 3rd line in your Module Processing Sequence to use AF_Modules/MessageTransformBean and give it a key in order to associate with the parameters you will need to type in below. These parameters are very similar to normal XI File adapter parameters.
    SAP Note 793922 has more info on the parameters... not the greatest reference I know.
    Also this has some info...
    http://help.sap.com/saphelp_nw04/Helpdata/EN/57/0b2c4142aef623e10000000a155106/content.htm
    I'll try and get some screen shots up on the Wiki.

Maybe you are looking for