Use 40 black 1 pixel x 400 pixel vertical lines, and create an experimental composition using varying vertical spacing?

Ive been pulling my hair out on how to do this all day and im getting no where i dont even know where to begin! Please help if anyone knows how to do this.

enforcer4u,
she said posting here if help was needed was a good idea...
This is Classroom in a forum.
I believe the first line should have read Use 40 black 1 pixel x 400 pixel vertical lines, and create an experimental composition using varying vertical > horizontal spacing.
One way (she may be following this thread, you know) would be to:
1) create a horizontal/vertical (composition Three/Four) line with the Pen Tool with a length corresponding to the whole composition and two or more Anchor Points, ShiftClickDragging at each with different lengths of the Handles;
2) Create a vertical/horizontal line by ClickDragging with the Line Tool (or just Click with the Line Tool and set the Length and direction, then move a copy (ShiftAlt/OptionDrag the original, start dragging a tiny bit before you press the keys);
3) Object>Blend>Blend Options, set Spacing to Specified Steps, 38 steps;
4) Select the lines from 2) and Object>Blend>Make;
5) Select both the Blend from 4) and the line from 1) and Object>Blend>Replace Spine.
Other ways include creating the first line and then ShiftAlt/OptionDragging to create the other lines up/down/left/right depending on composition, or creating or all the lines (maybe using the blend) and then ShiftClickDragging individual lines.

Similar Messages

Why when I want to take photo , the camera will appear such pink colour vertical line and become black and the video just can record 1 min only ?

why when I want to take photo , the camera will appear such pink colour vertical line and become black and the video just can record 1 min only ? why ? is that any problem ?

are you using the iOS camera? if you do, visit your apple store for further help, sounds like a hardware problem.
or:
hold home and lock button pressed until your iphone restarts.
if that didn't help, visit your apple store.
if you are not using the iOS camera, delete that app.

Black Vertical lines and a thin yellow haze in the center of my screen

I can't seem to find the answer to this question, or one that my be a solution. I recently discovered black vertical lines and a yellow haze in the center of my ipod nano 4GB.
One discussion said I should put it to sleep for 4 hours and the lines will erase. That didn't work. What's the common cause to this and how can I fix it? And could it be because I converted it from a mac to windows itunes?

Try giving it a reset. hold down the sleep and home keys until you see the silver apple. Let it reboot and see if that fixes it.

Bold, vertical, line and inverted drawing created when using Penpad in Flash CC - Help?

Hello.
Just recently, whenever I use my VisTablet 465 Penpad Stylus and tablet to mark on the Canvas in Flash, a vertical line is created. The length of it is proportional to how horizontally centered the cursor is on the screen. When I try to move the cursor, the brush makes an inverted mark off the end of the line. I cannot find out how to stop it, and cannot draw anything sensible in Flash.
I contacted Flash assistance, and this was the conversation:
Vivek: Hi, Welcome to Adobe Support.
Vivek: Please give me a moment to study this case.
Martin Laight: Thanks Vivek.
Vivek: Are you using the latest version of driver for the tablet.
Vivek: Please make sure Flash pro version, Tablet driver version and Windows is up to date.
Martin Laight: Yes, we believe it to be 'Model A' driver from the VisTablet website
Vivek: This kind of issues requires the envolvement from engineering team
Martin Laight: As far as we can see all drivers are up to date. The pen pad works fine in Windows 7 Paint
Vivek: ok
Vivek: Please go to the link above and post the issue with tablet model, operating system details.
Please help if you can.

Hi,
The issue is resolved in the latest update of Flash Pro.Please update Flash professional to 14.1.0.96 .Follow the instruction below for the same :
Installation instructions
Log out and log in to the CC desktop application. Update the application when prompted.
You should see the list of new updates as soon as the new CC desktop application is launched.
Install Flash Professional CC and Mobile Device Packaging app. On a high speed connection, it took me around 8 minutes.
After the application is installed, you can launch the application directly from the desktop app by clicking on it.
Thanks & Regards,
Sangeeta

When i turn my ipod on i get purple vertical lines and thats all it does, what is wrong with it?

When i turn my ipod on i get purple vertical lines and thats all it does, what is wrong with it?

It may have a bad display screen but you could try resetting to see if that helps.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

So, I dropped my phone today on the cement, it works...with minor annoying glitches, has nasty bluish vertical lines and the picture is a tad distorted as well. :/ Does this mean I need to spend tons of money to get this fixed? Ahhhh! Help!

So, I dropped my phone today on the cement, it works...with minor annoying glitches, has nasty bluish vertical lines and the picture is a tad distorted as well. :/ Does this mean I need to spend tons of money to get this fixed? Ahhhh! Help!

Hi Rahhh829,
Welcome to the Apple Support Communities!
It sounds like you may want to get your iPhone evaluated for repair. Please review the following web link for information on the iPhone repair pricing and process.
iPhone Repair and Service - Apple Support
Regards,
Joe

I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords but it does not work for the macbook.

I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords several times but it does not work for the macbook.

You will have to provide the correct password to delete the existing account, if you have tried but are not getting the password reset email, contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.

IPad Air iOS8.0.2. I used the photos app to edit my photos and created a new album for them. When I transfer my photos to my PC via cable (not allowed to use cloud services by my boss) i can only transfer the unedited versions. Any tips? Thanks!

iPad Air iOS8.0.2. I used the photos app to edit my photos and created a new album for them. When I transfer my photos to my PC via cable (not allowed to use cloud services by my boss) I cannot choose this edited album, only transfer the unedited versions. Any tips? Thanks!

Hi Anjohi,
Thanks for visiting Apple Support Communities.
If you've edited photos on your iPad and only see the original version when you import them to your computer, the tips in this article may help:
iOS: Edited photos show original photo after import or in other apps
All the best,
Jeremy

Strange Vertical lines and pixelation issues with my Powerbook screen...Hel

I have got a problem with mt LCD screen which now permanently displays lines of "dead" pixels, but they can't be dead because they chaneg all the time. If I move a window, I get lots more, which are created by the edge of the window, like a ghosting? Does that make sense?
I have taken a screen grab, but not sure how to feature it in these forums. Anyone got any ideas or know about this problem?
I have had a similar problem with this and other laptops, but it has always been a temporary thing before, when I had overloaded the system or something, and I got 'ghosting' from the trailing edge of a window, but this is permanently there?

I have now attached a monitor to the PB, and it happens on the monitor too...maybe suggesting something wrong with the graphics card or logic board, rather than the screen itself. When I type this message, I get strange red 'ghosting' lines where the cursor moves across the page.It reminds me of the 'Etch-o-sketch' game, where you draw lines, and then wipe them off. I can move a window from left to right and get these ghosting lines. When I move the window back right to left, they erase the lines to the left of the window, but I get more to the trailing right edge of the window...i.e. on the right of the screen.
Scrolling also removes these pixels, but creates new ones elsewhere.
Any ideas?

Occasional Vertical Lines and Black screen

Hi. My powerbook just went out of applecare coverage in August. In May, my display started to flicker, going black with about 7 vertical purple and blue lines on the left side of the screen. I ran fsck, etc., and nothing was wrong. It only happened briefly at first, so I ignored it, but eventually it happened so often that I couldn't work for more than 5 mins, so I decided to go to the mac store. The mac store could not replicate the problem, but sent it out for repair. A new keyboard and logic board later and everything seemed to be fine. At least until August, right when applecare coverage ended. The problem is now happening rather infrequently, but I'm concerned that it will again become permanent like last time. Given that I am no longer covered, I was wondering if anyone had any advice on how to fix this myself. I've run fsck but nothing appears to be wrong. The fan is also over-working itself lately, which didn't happen the first time around. Thoughts?

Welcome to the Apple discussions.
You might return it to Apple, and ask them to fix it correctly this time. Generally, issues that start while under warranty, but are not fixed, will be covered, but it's on a case-by-case basis.
What you describe sounds like a video circuit issue, and with the video circuit embedded on the logic board, replacement is the solution, as Apple did when you took it in for repair. You can run the Apple hardware test, or use one of the TechTools products, to test the video circuit.

Why is there a thin vertical line on the copy when I use the feeder?

There is a thin vertical line on copies when I use the feeder but not when I copy from the glass. The copier is new. Any ideas?

Hi Ccorning, When a vertical line (top to bottom) is produced only when using the feeder (ADF) of your laser product, the issue would actually be due to a small mark or debris on the scanning glass area that sits directly under the left panel cover of the ADF. This occurs because as the paper feeds through the ADF and across the scanning area, every inch of the paper passes over the small mark which gets picked up by the scanner. This then produces what looks like a line. However, thorough cleaning can resolve the issue. You can clean the platen glass and the underside of the ADF by following the procedure below. 1. Turn OFF the Main Power Switch and disconnect the power cord. 2. Open the ADF. 3. Clean the ADF scanning area on the left side of the platen glass and the same area on the lid (the area that would touch the scanning area when the lid is down) with a cloth dampened with water. You will want to carefully and fully clean the glass in the ADF scanning area. Look for scratches, tiny spots and marks of any sort. If marks are noticed, you may have to clean the platen glass up to three times or more depending on what created the mark (i.e.. correction fluid, pen ink). You can use a soft lint free cloth either dry, with glass cleaner or water to clean the glass and may have to scrub until it squeaks to remove certain types of marks. NOTE: Please spray the cloth with the cleaning solution and not the glass. Another way to ensure the mark is removed is to use a credit card by placing in on a angle and sliding it across the glass in one direction. The plastic of the card will not scratch the glass. You can then lift the credit card when reaching the end of the glass and return to the other side to slide it across again. Then wipe the area with a soft, dry cloth. 4. Close the ADF. 5. Reconnect the power cord and turn ON the Main Power Switch. Caution: Be careful not to get your fingers caught. After cleaning the glass, run 4-5 blank/clean pages through to test it. If the thin black line still appears, please try cleaning the scanning area again as a mark on the glass is the only cause for this. If the issue persists, there may be a scratch in the glass which would require service. If further assistance is needed, please feel free to Contact Us.

HELP! Vertical Lines and Can't Use Half of My Screen. What is Wrong???

Ok, this is really frustrating. Please read first.
I did not spill anything or drop my MacBook. A week ago, it was fine. And then I picked it up and opened it to check something, and my screen was SCREWED. Nearly half of the screen is filled with colorful, vertical lines. Between the lines is filled in with white. I can't see anything underneath and makes it so difficult to use my MacBook.
I don't know what is wrong. I called some places and some say it might be the video card, while a few say it may be the screen. I'm thinking of going to Best Buy since it's closer just to see what is up.
I purchased my MacBook in 09 and never had a problem. The warranty is gone. If it is internal, there is no way I'm paying/can afford $700+ and I'll have to downgrade for a PC I just don't understand what went wrong... can anyone help me save my Mac?? Does it sound internal or a screen issue?
I also took a pic with my phone of my Mac when it's on screensaver mode if that helps...
http://tinypic.com/r/246qhwy/7
Help please? Thanks in advance!!
PS: Here are my details:
13" MacBook OSX, MacBook5,2, 2.13 GHz, 2GB Memory, Version 10.6.6, Build 10J567

Hi HayItsRenee & welcome to the forum.
I'm sorry to hear about your troubles
Here are a few possibilities:
1) The display itself is bad.
2) The inverter cable is bad.
3) The video card is failing.
Do you have your install discs? If so, try booting up from your install disc to see if the same issue shows up. If you have the adapter that will allow you to connect your MacBook to an external display, you could try that as another troubleshooting step.
~Lyssa

Vertical lines and image gradients appearing on G5? PLEASE HELP!

Hello! I have been experiencing some issues with my G5 recently, in which I haven't been able to find very much information at all on. So, I figured I'd try to get everything sorted out here, and see if any one knows how I can fix my problem?
Vertical lines ;
From what I've seen, this seems to be a pretty common problem. It started one day when I discovered just a single pixel blue line running down the very center of my screen. After a while I learned to ignore it, but overtime, more began to appear. I am now up to 33 of these lines spanning in various different spots on the screen, all different colors. Again, I've learned to cope, but with time, more seem to be appearing. I'm just wondering how I can fix it, before it gets too bad?
Image gradients ;
I have never been able to find anyone with a problem even slightly like this on my type of computer, so I'm curious to know if anyone else has ever had this problem, or have seen of anyone who has? It seems that not too long after the vertical lines began showing up, that a weird sort of gradient type texture has appeared on many of the default mac images, along with images and videos in both preview and iMovie/quicktime. Here is an example of part of my screen:
I find that the places it effects the most are in games, such as Minecraft or the Sims 2, in which I used to play a lot a few years back. It also effects exported photos and videos if uploaded to the internet. For example, I uploaded a video to YouTube recently, in which I played back on my phone a few hours later to find that it had the gradient on it as well, only a red version. My brother seems to think its a virus, but I'm not sure? Does anyone know how I can fix this?
Thank you for taking the time to read!

The problem is usually a damaged graphics chip. Run the hardware test that came with the machine. The fact that the Apple menu is showing issues, says it is not with the image in question, nor with the screen image you grabbed. The screen capture depends on the graphics chip to render the image correctly. The fact is not, it captures the problem. If the hardware test is unrevealing, you may have bad RAM. Make sure the RAM is designated as iMac G5 compatible RAM, and not just any PC4200 RAM. Be careful to identify your iMac G5 correctly as there may be more than one type of iMac G5 compatible RAM:
http://discussions.apple.com/docs/DOC-6413

Vertical line and missing quotation marks

I am a new user to FlashPaper. When I created by PDF from
Microsoft Word, a black vertical line appeared and my quotation
marks disappeared. What happened? What am I doing wrong?

As you say, it's not waterproof, but it is really helpfull, thanks. The unclosed quotation are easy to find this way.
In Dutch we mainly use single quotation marks (double quotation marks are only used for quotations within quotations). This brings an extra dimension to the issue, since the apostrophe and single quotation mark are the same character. So a phrase like ' I'm having problems finding unopened quotations' with your GREP suggestion will mark the apostrophe in I'm as the closing quotation mark.
So what I'll do is:
1. find unclosed quotations ‘[^’]+?‘ and mark them with a character style WARNING;
2. GREP search ’[^‘]+?’ two following closing quotation marks and make them C=100;
3. GREP search ’[^‘’]+?’ the correct quotations and mark it all K=100;
4. Do a regular search for '^$ any apostrophe/quotation mark followed by a letter and mark them all K=100;
5. Do a regular search for any closing quotation mark left in C=100 and manually WARNING-mark the ones that need to be looked at by the editor.
Step 4 is a bit tricky since any error like 'I agree,'he said (no space after quotation mark) will be marked back to K=100 as well, but those errors I'll probably notice since they're underlined by the grammar control option.
Thanks again for the help.

Intermittent vertical lines and freezing

My G4 iBook is having some bizarre problems. Every once in a while, the screen goes wonky and gets streaked with pixelated vertical lines . The line effect seems to also translucently overlay the screen's contents a few pixels adjacent to where they belong.
This problem emerged immediately after I had the logic board replaced, and it occurs at random times, about once an hour or so on average. I manged to get this screen capture (Apple-Shift-3) during one of its episodes and have placed the image at: http://www.flickr.com/photos/kneague/223015879/
Any idea what may be the problem or how it can be fixed? I'm in discussion with Applecare, but I thought I'd throw this out to the forum as well.
Ibook 1.33 G4 Mac OS X (10.4.7)
Ibook 1.33 G4 Mac OS X (10.4.7)

Apple's technical support indicated the problem related to something on the logic board. I'll keep the photo posted in case someone else has a similar problem.

Use 40 black 1 pixel x 400 pixel vertical lines, and create an experimental composition using varying vertical spacing?

Similar Messages

Maybe you are looking for