Use a map display version low or not installed flash

When using the map display version low or not installed flash,but have installed the latest version of IE

Let's try a repair install of iTunes first.
Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
Can you launch your iTunes now?

Similar Messages

HT3669 Since I starting using my MacMini (2011 version) I have not been able to print double sided from my HP Photosmart plus - there is no option for this in the Printer dialog box as there was in the similar dialog box on my PC. How do I set up this opt

Since I starting using my MacMini (2011 version) I have not been able to print double sided from my HP Photosmart plus - there is no option for this in the Printer dialog box as there was in the similar dialog box on my PC. How do I set up this option?

1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now?

Itunes was not installed correctly error 1114. I have uninstalled and reinstalled using the steps several times., itunes was not installed correctly error 1114. I have uninstalled and reinstalled using the steps several times.

itunes was not installed correctly error 1114. I have uninstalled and reinstalled using the steps several times., itunes was not installed correctly error 1114. I have uninstalled and reinstalled using the steps several times.
I have never been so close to packing the whole lot up and sending the ipad back!
Please help!
Kieran

Issues installing iTunes or QuickTime for Windows
iTunes 11.1.4 for Windows: Unable to install or open
Troubleshooting issues with iTunes for Windows updates

"you can't use Icloud when multiple versions of outlook is installed. As far as i know I only have 1 version installed. Any ideas

I have recently loaded Icloud and received the following message
"You can't use ICloud when multiple versions of Outlook are installed. To use ICloud with outlook uninstall one version" As far as I am aware I only have one version. Is there anyone who had a similar issue and if you did what is the solution?

You're probably on OS X Lion?
I had the same problem as you. I used Software Update to update Logic Express to the latest version, and then it ran without any problems.

ICloud was working fine, suddenly when I try to sync I get this message "you can't use icloud when multiple versions of outlook are installed". I only have one version of outlook installed. Any suggestions?

iCloud was working fine, suddenly when I try to sync I get this message "you can't use icloud when multiple versions of outlook are installed". I only have one version of outlook installed. Any suggestions?

Message was edited by: leroydouglas
better yet, try this solution:
https://discussions.apple.com/message/12351186#12351186

HT1349 How do I find where my multiple copies of Outlook are? (It said Multiple Outlook versions installed. You can't use iCloud when multiple versions of Outlook are installed. To use iCloud with outlook, uninstall one version.")

I have just started with iCloud, and run into a problem from my PC.
It says: "
Multiple Outlook versions installed.
You can't use iCloud when multiple versions of Outlook are
installed. To use iCloud with outlook, uninstall one version.
I have searched and found two versions of Outlook 2013 and 2015 (one of which was inactive, but I have removed it), and one of outlook.pst, which I have removed.
Where do I go from here?

That's a Windows/Office problem. You should ask in the Microsoft support forums.

Connected ipad to win 7 computer to upgrade it thru itunes. Says ipad has latest version but did not install correctly. Appear to have lost everything

Connected ipad to win7 computer to upgrade os as I needed to download an app. Says it has latest version but it did not install correctly. Ipad says hello,asks for language and location,wi-fi then options are set up as new ipad,restore from icloud or itunes backup. I think I have managed to backup over my good backup and lost everything. Ipad will not boot HELP

Hello RodneySmart,
Thanks for using Apple Support Communities.
From what I understand about your issues is that your iPad will currently not turn on. In attempt to resolve this issue please follow the steps in order below:
Resolution
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Take care,
Alex H.

When I was updating I Phone version 4 from iTunes. it got stuck in middle of updating, after uninstall the version 3 and new version 4 was not installed. Now iTunes is not detecting the iphone and my iphone is also not working n showing connection cable

When i was updating i phone version 4 from Itunes. It got stuck in middle of updating, after uninstall the version3. But new version was not installed. Now itunes is not detecting the iphone and iphone is also not working and showing connection cable with itunes. Pls help..

Check your system for possible Malware. But you have to do it in WIndows Safe Mode.
(Do not use your own Anti-virus to SCAN)
Start your computer in "Safe mode with networking", go to this link download a free version of Malwarebyte.
http://www.malwarebytes.org/products/malwarebytes_free
Install and perform update immediately, then do a full SCAN. Remove malware if it indeed finds any. Restart computer to regular windows to let Malwarebyte complete the removal.
To start your computer in safe mode
Press and hold the F8 key as your computer starts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you'll need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
On the Advanced Boot Options screen, use the arrow keys to highlight the "safe mode with networking" option, and then press Enter. Log on to your computer with a user account that has administrator rights.
When your computer is in safe mode, you'll see the words Safe Mode in the corners of your screen. To exit safe mode, restart your computer and let Windows start normally.

HT1349 How do I resolve issue of new version of itunes not installing? I get an error messagge when software is trying to install?

How do I resolve issue of new version of itunes software not installing on my computer? I get error message when I start the install..

Do you have the correct system requirements to download the latest version of iTunes:
Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, or 32-bit editions of Windows 7
or
Mac OS X version 10.5 or later

New version "Corrupted" or "not installed correctly."

I just tried to open iTunes for the first time since I did a software update about two weeks ago.
I get a message that reads: "This copy of iTunes is corrupted or is not installed correctly. Please reinstall iTunes."
I don't want to lose the songs I had in my library. What's the correct way to do this?

Let's try a repair install of iTunes first.
Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
Can you launch your iTunes now?

Qosmio F10 display and sound drivers not installing

Hi, my hard drive went and on replacement we used the toshiba recovery disk.
We have installed the Intel Chip Software and then NVIDIA driver. It says its installed but makes no difference after restarting computer. The sound driver starts to install and then says driver not found. We have downloaded new drivers and keep getting the same results.
The operating system is XP home. Any advice is apperciated.

Hi Fresh,
> It says its installed but makes no difference after restarting computer.
Which difference should it make? After driver installation your computer will boot in the same way as before so I dont know which difference you expect after driver installation.
As Akuma wrote normally after using the recovery disk, all drivers and tools are preinstalled. Do you have yellow exclamation marks in device manager?

I have a Mid 2009 Macbook Pro 13 with no restore disk; it has OS 10.8.4 I believe there is something wrong with the OS due to I can not install flash player to view Youtube videos and the when we plug in a Bose headset the sound out will work sometimes

I bough a used Macbook Pro mid 2009 that came with OS 10.8.9 it didn't have a backup restore disk with S/N W8******66D
When trying to view some youtube videos; a window would pop up saying "it needs adobe flash player is required for video play back get the latest flash player" but after downloading the file and during installation would have errors and will not installed.....tried to reboot and install again.....but still the same.
The othe thing I had noticed is when using a good Bose headset with mic the sound output would noticed the headset and then switch from headset to Internal speekers and headset.....thinking that there might be something wrong with the plug in port of the computer or the headset.....the headset works with no issues on my iPad so there must be something wrong with the computer.....tried to move the plugin around the port but no change....while the headset is plug in can hear a short clicking noise and the sound would get lost and back again......but with nothing plugin to the port there is no issue with the sound or mic.
Thanks for your feed back......it looks like I have two different issues one is a software issue and the outher is a hardware issue
<Edited By Host>

The "restore disk" is built into the Mac. See About Recovery.
Need more specifics about what error messages you got while installing Adobe Flash.
However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
Click the Try something new! link at the bottom of the YouTube page.
I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

Upgrading but not installing Flash with MSI

I have an environment of some 600 PCs running XP. A few have Flash installed, most do not. Those that have Flash installed are a variety of versions.
It's my intent to perform a Flash install using MSI and GPO, and that's (mostly) tested and working.
However, I don't want to install Flash anywhere it isn't already. The systems that do have Flash installed are effectively random across the organization, not matching up in any way to GPO.Doing that I want to use the MSI, so I can have it automatically install to the machine.
Is there a way to install/upgrade Flash only on those systems that already have Flash installed, and not install it elsewhere?
Thanks

I don't know how to do that, although it sounds like a very good idea.
Have you seen the new 10.1 Admin Guide if it contains any suggestions: http://www.adobe.com/devnet/flashplayer/articles/flash_player_admin_guide.html ?
You will probably need to write some sort of script to test for a current FP installation before you proceed with the update.

I can not install flash player activeX

Hi, For some reason I had to uninstall Flash Player Plugin Istaller Active X and Flash Player. Although he has performed all procedures and automatic aid two days have passed and I can not install the Active X control As part of the 'install it I get a notification saying actual words (translated from Italian into English):
The Adobe Flash Player ActiveX is not attempting to install the latest. Visit http://......................player_it to get the latest and most secure.
This message appears just downloading from the site recommended and everything is really frustrating. My OS is VISTA64x Home Premium and the problem persists on both IE8 IE8 x64 x32.
Also stress that I have not installed any ActiveX flash player so why do I feel that I try to install the version that is not especially since the most recent discharge from the link that that message would you recommend?
I hope someone is able to say once and for all how to solve this problem.
Sincerly Jinjetto

Hi, glad that worked for you. Also thanks for the explanation as how you came about this. Yes, from my understanding any Install of the CS5, even a trial version Installs the 10.1 (beta/prerelease) versions. It is not clear to me or others why the 10.1 was used in the CS5 instead of the latest version (10.0.45.2). My only guess is that the 10.1 is very close to being released as a shipping version (final release) to the public. The 10.1 had a target date of the first half of 2010. Perhaps that was the reasoning. This is just my opinion:-)
As I said, many users are having this problem, not just with the CS5, but they Install the 10.1 thinking that will solve whatever problem they may be having with the latest version.
Your thread is very helpful for other users that may be having the exact problem that you were. For this reason if you marked your thread as answered, they would read it first.
Thanks,
eidnolb

Please Help - Can Not Install Flash

This is not about downloading or uninstalling,this is about getting flash installed.
I have a Power Mac G4 with 10.5.8 I was trying to install the latest version of Flash Player and it did not work.
I used uninstaller,then downloaded - install_flash_player_10_osx.dmg.- Everything went fine until the end. I got a - The following install step failed:run postflight script for plug in.
Then I downloaded - flashplayer10_1r102_64_ub_mac.dmg - opened it,right clicked on it and went to "Show Contents" then "Resources" and tried installing - Adobe Flash Player.pkg. I got a - You cannot install PlugIn on this volume. A newer version of this software already exists on this volume. Even though I used uninstall to get rid of all Flash beforehand.
So now any website that need flash player I can not use.I have looked all over this web site for an answer.Please help me get flash player reinstalled,the lattest version if possible.

Via Javascripting. Look for Flash detection kits at the
Adobe/Maromedia web
site and also at Internet search engines.
As well this forum focuses on database access issues and you
might find more
takers for this type of question in the Flash General forum.
Lon Hosford
www.lonhosford.com
May many happy bits flow your way!
"jiby" <[email protected]> wrote in message
news:e3odp2$pdc$[email protected]..
Hi,
Please help
How can I install flash player plugin (version 8) in browser
without
downloading setup or redirecting to macromedia site if flash
plugin is not
available in browser
Thanks

Use a map display version low or not installed flash

Similar Messages

Maybe you are looking for