Use a partition on external drive for windows support software

Hello
I am trying to install Windows 7 on my MacBook AIR 13" 8GB. I have an external drive that i created a partition for the Windows Support software but when I choose to proceed in Boot Camp Assistant to download the windows support software it says the entire drive has to be one partition formatted to MS DOS.
Any way around this..I have the Windows disc and would like to avoid having to buy another 8 GB or greater size external disc drive
Thanks

I do not want to install Windows on the external drive.
An external drive is needed to download the windows support software as stated in Boot Camp. It seems I cannot use a partition on the external drive to download the support software.. Wondering if there is a work around this..

Similar Messages

Should I create a partition on external drive for iTunes music?

...or will it create it's own space outwith my backup stuff?
(Secondary question: would moving my iTunes music from internal to external drive noticably improve performance of my Mac? I'm using about 135GB of a 250GB drive, 60GB of which is in iTunes Music folder)

Should I create a partition on external drive for iTunes music? or will it create it's own space outwith my backup stuff?
I see no good reason to create a separate partition unless you're backing up with Time Machine. TM prefers to have it's own volume, so in that case partitioning would probably be a good idea.
would moving my iTunes music from internal to external drive noticably improve performance of my Mac? I'm using about 135GB of a 250GB drive, 60GB of which is in iTunes Music folder.
No, probably not. As long as you're not getting the drive too full - opinions vary but about 20GB remaining should be plenty for most uses - you probably won't see any overall change in performance just from moving the iTunes content.
Message was edited by: Dave Sawyer

If i install microsoft office after partitioning my hard drive for windows, will it be available on both sides of the partition?

If i install microsoft office after partitioning my hard drive for windows, will it be available on both sides of the partition? Will it be universal for the computer or would i have to install it on both operating systems? Or, if I install office BEFORE partitioning, will it be available on both platforms after i partition?

If I understand your questions correctly, then I'm inclined to say no. Office for Windows and Office for Mac are two completely different applications. if you run via BootCamp, only one partition will boot.
If you want to run Mac and Windows at the same time, you could do what I did:
Get Parallels
Install Windows as VM on top of Parallels
Install Office in Windows
Now, you can run your OS X, jump into Parallels' WIndows and use Office that way.
It needs a lot of RAM, 4 is a bare minimum to realy make it sensible, 8 wouldn't hurt.

HT201250 Hi, I hope this question won't seem too basic but if I want to use a new larger external drive for my time machine backups, will it do a new full backup the first time I plug it in and if so, do I really need all the old backups on my smaller ext

Hi, I hope this question won't seem too basic but if I want to use a new larger external drive for my time machine backups, will it do a new full backup the first time I plug it in and if so, do I really need all the old backups on my smaller external drive?

50maz wrote:
Hi, I hope this question won't seem too basic but if I want to use a new larger external drive for my time machine backups, will it do a new full backup the first time I plug it in
Yes, it will do a full backup.
and if so, do I really need all the old backups on my smaller external drive?
Only if you want to be able to go back in time to those previous Time Machine backups. When you plug in the new larger external drive, you will only be able to go back as far as the first day you plugged it in and ran the first Time Machine backup on it.

I got an old Apple G5 shell from Goodwill. I'd like to salvage the Superdrive and use it as an external drive for my Apple laptop. Is this possible, and what cables would I need if so?

I got an old Apple G5 shell from Goodwill. I'd like to salvage the Superdrive and use it as an external drive for my Apple laptop. Is this possible, and what cables would I need if so?
Other info is available:
Superdrive MFG date: Sept 2009
Model: DVR-118LBK DVD-R/RW Writer Unit
My Macbook is: Mid-2010, running Mavericks
Thanks in advance, God bless!

That's a nice Pioneer DVD±RW drive - and an upgraded replacement for the original optical drive that shipped with that G5. For a finished look, you'd want to install it in an external enclosure for 5.25" IDE/ATAPI drives that converts it to USB connectivity. Because SATA optical drives have replaced ATAPI drives in recent years, the selection is getting more limited for a new enclosure, although used ones can undoubtedly be found at ebay. Here's an example of one, although it only features USB connectivity. You can also find enclosures that have both FireWire and USB connectivity, which for Mac users is beneficial. Booting the computer (if needed) by a FireWire-connected device is generally more reliable than USB booting. If this isn't important to you, then a USB-only enclosure would be adequate. The enclosure will have directions, but essentially all you need to do is plug in the power cable and data ribbon cable and then secure the drive to the bottom plate of the enclosure with the included machine screws.

Can the mac osxlion usb jump drive be used after as a external drive for storing media files

can the mac osxlion usb jump drive be used after as a external drive for storing media files

If you are talking about the Lion install USB thumb drive sold by Apple then no it can't. it has some specail formatting that makes it show up as a DVD drive and is securely locked from any changes.
But I must ask why would you want to. That would destroy that drive and wipe out the Lion installer.
USB thumb drive can be bought for $8.

Use external drive for windows and mac

Hello,
I just bought a external 320Gb Western Digital Drive. I would like to use
the drive for windows and mac.I will not like to make partation on the drive
to use it on both operating systems. Is there any formating system with which i can use in both operating systems? I would like to use time machine feature on that drive also.
Thanx.

If you want to use a disk for both PC/Mac file storage and Time Machine, you will have to create two partitions. Partitioning is sort of like creating multiple virtual disks on the same physical disk. One partition should be formatted for PC (which the Mac can also use) and the other should be formatted for HFS+ (Mac only) which is what Time Machine requires. The Disk Utility application makes partitioning and formatting very easy.

How to best partition an external drive for my purposes?

Hello, please help,
I've just bought a Western Digital 'My Passport' 320Gb USB (no firewire) portable external harddrive for backing up my data prior to iMac repair.
I also plan to totally wipe my PPC iMac and reinstall it with Leopard.
I erased the external HD, zeroing out the data from it's previous owner, and reformatted it as Mac OS Extended (not journaled).
Now I realise that it might be even more useful than I'd imagined.
I'd now like to partition it so I can use Carbon Copy Cloner to create a bootable copy of my entire iMac while using the rest of the drive as a separate partition for just backing up data.
Ideally I want to be able to use the drive on both Intel and PPC Macs and even PCs, is this possible? How should I format the drive to achieve this?
I've heard I should format it as Mac OS Extended (Journaled) HFS+, what ever that is
I'm currently running OS 10.4.11 but plan to buy Leopard and install that after the wipe.

17" 1.9Ghz iMac G5 (iSight)
I've just bought a Western Digital 'My Passport' 320Gb USB (no firewire)
I'd now like to partition it so I can use Carbon Copy Cloner to create a bootable copy of my entire iMac while using the rest of the drive as a separate partition for just backing up data.
Ideally I want to be able to use the drive on both Intel and PPC Macs and even PCs, is this possible? How should I format the drive to achieve this?
For what you want to do, there is a mismatch between your PPC computer and the external drive that you bought.
With a few exceptions, a PPC Mac requires a firewire external drive for booting and will not boot from a USB drive, regardless of which OS is installed and regardless of the partition scheme and volume format on the drive. I also have an iMac G5, and mine will not boot from USB.
If you do exchange your drive for a firewire drive, do not get another Western Digital model to use with your G5 - many external WD firewire drives will not boot a PPC mac. See [this page|http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/stdadp.php?pfaqid=1787]
If you want to keep your present USB drive, you can still partition it with one partition for a backup clone and another for "other stuff". With respect to immediate use for recovering your stuff after a clean Leopard install on the HD, I think that Migration Assistant will still work, though I haven't tried this. As for the future, the problems with a clone not being bootable are 1) You can't test it to see if it works OK, and 2) If you do need to restore from it you'd need to boot from "somewhere else" - I think you could boot from an install disk and use Disk Utility's Restore feature to clone it back.
With regard to PC access, a PPC mac normally requires an Apple Partition Map partition scheme on the drive for booting, and such a scheme does not allow for the FAT32 volume format that is readable by PCs. However in this case since your PPC mac can't boot from it anyway, you could partition the drive as GUID. This would allow the main volume to be formatted as Mac OS Extended (Journaled) for the nonbootable clone, and would allow the extra volume to be formatted as FAT32. If you eventually got an Intel Mac, a clone from it to the main volume would also then be bootable.
But what I would do, if feasible, is exchange the USB drive and get a non-WD firewire drive instead.
Message was edited by: jsd2

Using both internal and external drives for iTunes

Hi
I know this is a basic question . I did a few searches and my head started spinning .
I've been using an external drive for my music but it only has 3GB left .
My internal drive has 12GB so I would like to start to use it for storage of music along with the external . (I'll be getting a new mac soon)
In Importing I have >Create file names with track number
Advanced>Keep iTunes Music folder organized
This is on my Panther eMac with iTunes 4.7.1
thanks in advance for any help
----------bob
Powerbook Mac OS X (10.4.6) Panther eMac

The only thing you have to do is to click the 'Reset' button in Preferences>Advanced>General.
Your 'iTunes Music folder location' will be reset to the default location on the internal disk.
All new imported music will be stored there.
New added music will be stored there if you have the checked 'copy files to iTunes Music folder location when adding to library' in Preferences>Advanced>General.
When your new Mac arrives and you want to transfer the library, first copy the entire 'iTunes' folder (in ./Users/YourUsername/Music) from your eMac to the exact same location on the new Mac.
To transfer the iTunes folder, you can burn it on CD or DVD, but a lot easier is to put the eMac in Firewire target mode.
This article tells you how to do that:
How to use FireWire target disk mode
After the transfer of the iTunes folder is completed, connect your external drive and run iTunes.
The new Mac will have a newer iTunes version and it will take some time to convert the old library format to the new format.
Once all works OK and If you want all your music on your new Mac, use the 'Consolidate Library...' command from the Advanced menu in the menubar.
All music from the external disk will be copied to the internal disk.
Hope this helps.
M
17' iMac fp 800 MHz 768 MB RAM Mac OS X (10.4.6) Several ext. HD (backup and data)

How to use an external drive for windows and mac

I recently got an external hard drive (2 TB seagate expansion) and I need to be able to use it with both my mac and my windows computer. I have read numerous forums and tried downloading various third party programs but nothing seems to work! One of the things i have read was to create a partition on the drive, this is easy enough and i did try it so i do have one side i can add stuff from from windows and one side i can add stuff to from my mac but then i cant access the other side. So say i need to get a file from my mac to my windows. I add a file to the mac side of the partition from my mac but then when i plug it into windows i cant retrieve that because its on the mac side of the partition (and vis versa). Is there some sort of easy way around this? or some way in which i can format the drive where i can move files back and forth from windows to mac without any expensive third party programs?
Thanks!
Bryan
PS. I did notice when i originally got the hard drive i had a bunch of files on it that were added from windows. When i plugged it into my mac i could see and copy these files but i could not add new files. Is there anyway to get around this "read only" type formate if i were to reset my drive back to its factory settings?

Three ways to go;
Repartiton the drive (1 partition) as MBR and with FAT32 file system. This is readable and writable by both Mac and Windows, but has a file size limit (which I think is 4GB).
The alternative is to leave the drive formatted as NTFS for Windows (this is not normally writeable from Mac) and employ a third-party software application which can write to NTFS. NTFS-3G, Paragons NTFS for Mac and Tuxera NTFS have all been recommended elsewhere.
Or you can repartition as GUID with HFS+ (Mac OS Extended Journalled) file system. This would not normally be accesible to the Windows machine, but once again there is 3rd-party softwsre available to enable Windows to read and write to it. MacDrive is the only one I'm aware of, but there are probably others.

Partitioning an External Drive for a Mac

Hi there, I have a 300GB external Seagate hard drive. I'm connecting it through FireWire. I want to partition my drive in 2 partitions. Each 1/2 (150GB). 1 for Windows (Fat 32) and one for Mac (?)
I already have the Windows Partition finished, and put some files on it which I don't wish to have to copy over again. (It took a long time.)
In Disk Utility on my Macbook Pro, how can I take the empty space (150GB) on the drive, and partition it so my Mac can use it? I do not know which disk format to use. Journaled, or Extended? I just set it to Extended as a guess, and when I click partition, it says it will wipe the entire volume. What do I do?

Well, there's definitely a communications problem here. AFAIK, when you select DU's partition tab, it shows the current partitioning state. On a new HD, that's one. If you create multiple partitions, then they're created. If you didn't create the second partition, then, as Kappy stated, you need to start from scratch and create the partitons at the same time.

Using Migration Assistant on external drive for moving new apps to Leopard

I'm sorry if this has been covered, but I searched and couldn't find the answer on any previous posts.
I am having the infamous "yellow triangle" problem when trying to install Leopard on my iMac. I created a bootable copy of Tiger and all my apps, etc. on an external drive (including Parallels/Windows) with SuperDuper, and I'm planning on trying an "archive and install", and then hopefully using MA to transfer all of my settings and files from the bootable copy of Tiger on the FireWire drive.
Obviously before I go ahead I want to make sure I can do this. Is this possible, and what would the basic steps be?

I didn't know I needed to disconnect the FW drive in the first place. That may be the root of all my problems.
I have been having nothing but problems with this Leopard install on my iMac (though it seems to be working on my Macbook Pro). Here's what happened:
* The iMac install was going just fine (though I had the external hard drive connected). I selected the internal hard drive (no yellow exclamation or anything like that) and it began to install. After about 2 minutes it kicked me out and said there was an error.
* ok. So I rebooted and tried it again. From this time on, whenever I tried to install Leopard on the hard drive there was a yellow exclamation, and I got the infamous "Can't install OS X on this volume without changing installation settings" (basically erase and install)
* Then I tried Leopard Disk Utility. When I tried to verify the disk, it gave me an error saying the disk has the incorrect number of extended attributes (should be 0 instead of 238) and it needs to be repaired. But it wouldn't let me repair it, even if I rebooted off the DVD.
* Next, I went back to Tiger's Disk Utility and verified the disk and repaired permissions. There seemed to be an error that was corrected, so I thought that would do the trick. Wrong! By the way, I checked the partitions and the disk is formatted with a GUID partition.
* Even after the repair and verification with Tiger, I still get the same problems. When I go to install Leopard, it doesn't work and I get the same errors if I run Leopard Disk Utility.
This is why I was going to do an erase and install, and import via MA. Do you know any way around this?

External Drive For Windows And OSX

Hello!
I'm using an external USB/FW drive for back up. It's formatted as "OSX Extended".
1) If I copy the data off this drive, what format would I need to re-format it in, so as to be able to back up from both OSX and Windows?
2) Will I be able to reload the first set of data, once I re-format it in the other format?
Thanx!

I don't recall either of those being mentioned in the OP's question, Niel. Only "backup" which does not necessarily mean Time Machine.
You might mention how much it will cost to buy MacDrive: Standard is $50 and Pro is $70.00.
BTW, I know you can't use FAT for Time Machine nor bootable backups. But FAT is not limited for use as a backup drive using other utilities that haven't the limitations or reliability issues of Time Machine.

HT4818 When I try to partition my hard drive for Windows 7, I get an error saying The disk cannot be partitioned because some files cannot be moved. I have a 2006 Macbook Pro I believe and I really need assistance as soon as possible.

I have Windows 7 Premium Home and I have downloaded the Drivers and when I click Boot Camp Assistance to partition my hard drive, it says, "The disk cannot be partitioned because some files cannot be moved. Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again." I can't do any backup really because I don't have an external hard drive to work with. I tried repairing disk permissions but that did not do anything. I really need a lot of help with this with some easy, step-by-step tutorials or something. I believe I have a 2006 version of Macbook Pro(4,1).

Once you have obtained an external drive and connected it you will 'clone' your internal drive to it.
Download Carbon Copy Cloner (it is not free but there is a fully functional trial version which is). Use it to clone your internal drive to your external drive. When that is done you will reboot from the clone and use Disk Utility to erase the internal drive (choose Mac OS Extended (Journaled)) as the format (this is normally preset, but check). Make sure to give the external drive a 'distinctive' name, don't want to get drives mixed up in this process.
Once that is done you will use Carbon Copy Cloner (from the clone) to restore the external to the internal.

Partition an External Drive for Time Machine?

I am new to the Mac world. I have a new iMac with a 1TB hard drive. I have a 2TB external USB hard drive I've plugged in and started using with Time Machine to backup up my Mac. But I'm thinking I'm wasting a lot of hard drive space which I could use for something else. Can I partition the external hard drive say into two 1TB partitions and use one for Time Machine and one for something else? If so, can I do it now that Time Machine thinks it has all 2TB? Or do I have to start from scratch? Thanks!

+Can I partition the external hard drive say into two 1TB partitions and use one for Time Machine and one for something else?+
You can, but it's not advisable. How are you going to back up the data on the other partition? If your internal drive is 1 TB, then 2 TB is about the right size for a TM backup volume.
If you place any value on your data, hard drives are cheap. Just get another one.

Use a partition on external drive for windows support software

Similar Messages

Maybe you are looking for