Use an AudioInputStream to create a Processor - How?

Hi,
For my Application I need the javasound but I also need JMF.
I was looking for an answer of the following question, but I don't find any:
How can create a Processor out of an AudioInputStream?
If anyone knows the answer, please tell me, because it's very urgend.
thx

Would I need to put the AEBS into bridge mode to prevent disruption of the network for the other guys...
I did suggest that above. Even if you don't use bridge mode, it won't affect the others.
...or can it be set up as its own wireless network with a separate password?
That is no problem at all. You can use the same SSID (network name) and wireless encryption type/level/password as the other network or you can create something completely separate. This will work regardless if you configure the AEBS to operate in bridge mode or not.

Similar Messages

  • Using Pen tool to create mask _ How do you get the points to stop connecting together?

    I've masked the sky over the roof of a home. Started on the left side of the photo and moved over the house detailing it to the right side of the photo. When I try to create the mask by clicking Command /enter the points on the left and right side of the image connect which makes it impossible for the mask in the sky to work.

    Hi John,
    Thanks. I figured it out so there’s no need.
    Aloha,
    Rick Doyle
    [personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
    [This is an open forum, not Adobe support, please do not post personal information]
    [If you are posting using email, please turn your 'sig file' function OFF for posting]

  • Music and Video on Nas in folders but how do i set up itunes on multiple computers to see and use these files and create libraries?

    Music and Video on Nas in folders but how do i set up itunes on multiple computers to see and use these files and create libraries?
    So i have had a itunes set up on my old PC, bought a NAS and copied the folders over to the NAS, i did this incorrectly and so then even when i told the old PC to use that folder it saw all the songs but wasnt able to play the songs as it was looking in the incorrect place.
    So now i want my Mac as well as my PC and others to all use the music, videos etc on the NAS they are in itunes friendly folders (as they were compiled this way by the itunes on the old PC.
    When i tell the mac to use the itunes library.itl file it sees the song list (about 100gb) but cant see any songs, so i have removed this file to another location for now with the hope to set up a new file and then get it to see the songs on the folder from the NAS.
    Can someone tell me how to do this for all the Mac's and PC's on my network as i really want one master library that all use and add too.
    Thanks for your help in advance.

    I have the same question but I am using two pc's

  • How do I use Airport Extreme to create wired access point on wireless network?

    Bit of an odd situation. I just went from cable to DSL at home and the modem moved from right by my computer to upstairs.
    Trouble is, there's no real easy way to get a cable from the modem upstairs to my X-box (sans wireless connector) downstairs.
    I could buy the wireless adaptor for the X-Box, but I was hoping I wouldn't have to spend any more money.
    I have my airport extreme, and I was hoping I could use it to create a wired access point on the network, recieving the signal from the wireless modem upstairs and allowing me to plug in the X-Box.
    Is this possible? If so, how? I've been through the config panel about a dozen times, but can't figure out what combination to set up.
    Thanks.

    Will it work if I use the express to create the network?
    Yes, providing that you have an 802.11n version of the AirPort Express and the Express has been configured to "Allow this network to be extended".
    Then, the AirPort Extreme can be configured to "extend" the Express network. When you do this, the AirPort Extreme will provide more wireless coverage and the LAN Ethernet ports are enabled, so you can connect an Ethernet device.
    This will not be a "normal" Ethernet connection. It will only work as well as the wireless "hop" between the Express and Extreme allow.
    For best results and performance, a wired connection through the hole in the wall is always best. If you decide to do this, you will need the "new" AirPort Express with both a WAN and LAN port on the device. But, you could try wireless first to see if it will meet your goals before you reach for the tools.

  • I have 4 equal oblong shape created with borders How do I go about knowing what size the selection area is so that I can crop an image to fit. I don't want to use paste in then adjust the bounding box to suit

    I have 4 equal oblong shape created with borders How do I go about knowing what size the selection area is so that I can crop an image to fit. I don't want to use paste in then adjust the bounding box to suit

    What do you mean a moderator

  • I have moved from a G5 Powermac to an Intel Mac Pro and am porting over Items from a Backup HDD. How can I access and use drawings and documents created on the PC computer on the Intel computer ?

    I have moved from a G5 Powermac to an Intel Mac Pro and selectively porting over items from a backup hard drive.
    How can I access and use documents and drawings created on the PC based computer ?

    Clarisworks, you need Appleworks, which will only work with Mac OS X10.6.8 or earlier.  See this tip if you must go newer.  Mac Pros with newer hardware configuration than July 20, 2011 can't use Mac OS X 10.6.8 or earlier without this tip and then it would be Mac OS X Server.  I'm not sure if the new black Mac Pro supports that configuration or not.
    iPhoto, there is an iPhoto for all versions of Mac OS X.
    iTunes, there is an iTunes for all versions of Mac OS X.  Note with iTunes versions 11 and later, which are needed for syncing with iOS 7 or or later, you will lose coverflow, if you liked that feature.  Sadly you can't run an older version of iTunes from within Mac OS X 10.9 or later.
    Sketchup: http://help.sketchup.com/en/article/60107 shows the versions that will work with intermediate Mac OS X versions, and this shows the latest version: http://help.sketchup.com/en/article/36208 be sure to click on the operating system you choose to use.
    GIF - Viewing GIFs Apple's Preview can do that.  Editing them, I like http://www.lemkesoft.com/ Graphicconverter.
    DMG is able to be opened by all versions of Mac OS X.  This are just "disk images" which store programs on a virtual disk that will open when double clicked.    Frequently you'll find the installer of the said program inside.  To find out if the program itself is compatible with 10.7 through 10.9, see http://www.roaringapps.com/
    Otherwise see the resources on:
    https://discussions.apple.com/docs/DOC-2455
    If you end up deciding to stick with Snow Leopard.

  • Once I create a html5 animation using the 'Toolkit for CreateJS' in flash, how do I then insert it..

    Once I create a html5 animation using the 'Toolkit for CreateJS' in flash, how do I then insert it into a webpage via Dreamweaver:
    This has been sending me round in circles for over a week - can anyone let me know how I do this or can they point me in the direction of a tutorial?  Thank you in advance - d;-)

    There are some tutorials on Adobe site:
    <http://www.adobe.com/devnet/createjs/articles/getting-started.html>
    <http://tv.adobe.com/watch/adc-presents/toolkit-for-createjs-part-1-designing-game-assets/>
    <http://tv.adobe.com/watch/adc-presents/toolkit-for-createjs-part-2-adding-game-interactivi ty/>
    The parts 1 and 2 are videos about 10 minutes each while the first link is a detailed article that you can print and practice on your machine.
    Hope this helps.

  • Using Pages, I have created a document and inserted a Table for use in logging an inventaory. When I came to print this off however the lines for the table were missing but the text was in the Table format, weird! How do I print the Table?

    Using Pages, I have created a document and inserted a Table for use logging an inventory. When I came to print this document the lines and boarders of the Table feature did not print however the text did print in the table format. How do I get the lines and boarders to print also?

    Using Pages, I have created a document and inserted a Table for use logging an inventory. When I came to print this document the lines and boarders of the Table feature did not print however the text did print in the table format. How do I get the lines and boarders to print also?

  • How to use the DLLs which created from c++ in Java?

    And How to use the DLLs which created from JNI in C++?

    Huh?
    Are you asking how to do JNI - you should read the tutorial.
    Are you asking how to load it - then use System.loadLibrary()
    Are you asking what to do with the output from javah - put it in a C file and write some code, compile it into a dll.

  • How & where to use Java script to create new button in object detail page

    Hi All,
    I want to create "New/Add button" in object detail page. If i am not wrong i need to use java script for that but could you please let me know how & where to use Java script to create new button in object detail page in CRMOD.
    Thanks in advance.
    Regards,
    Manish

    Any related object on the detail page should have an "Add" or "New" or both buttons by default - This is vanilla functionality and will do the required action.
    If you want to modify this behaviour and do something tricky you will potentially have to go for javascript. You should add the javascript on a custom web tab on that Object.
    Admin --> Application Customization --> Contact -->Contact Web Applet
    Now, add your javascript in the code area, after you select the type = HTML for this web applet, expose this web applet on the Contact detail layout and your javascript will be invoked whenever this page is loaded.
    Check this online document to see how javascript can be embedded in CRM on Demand http://helponmyproject.com/TTOCOD/
    Cheers!
    Royston

  • How to use class.getResource() to create an ImageIcon

    Hi,
    I am well acquainted with creating and using ImageIcon icons using the ImageIcon constructor
    and putting the image file in a folder called Images which is at the same level as the
    bin and src folders.
    I discovered a demo program, LayeredPaneDemo, that uses class.getResource() to create
    an icon and found that in my eclipse version, the icon's image file was not found when
    I used the original getResource() call but the icon was created when I used the ImageIcon
    constructor.
    I posted on JavaRanch and eventually realized that the image file needed to be with the
    .class files, so I moved the Images folder under bin and getResource() works fine and I'm
    happy.
    However, I have three questions for you.
    One poster on JavaRanch told me that it's better to use getResource() rather than the
    ImageIcon constructor for distributing an app (I'm not distributing anything but want
    to do it all correctly).
    Do you agree with that or can I safe keep using the ImageIcon constructor?
    Another poster told me he doesn't think it's safe to leave the image file in bin because
    it might be lost during the build in eclipse and that there is a way to have eclipse copy
    the files to bin during the build which should mean that I can leave the images folder at
    the level of bin and src.
    Do you agree with that?
    If yes, how do I get eclipse to copy the file during the build?
    P.S.
    Before I posted on JavaRanch, I put the Images folder at every level of the project's
    directory as shown in eclipse (which is why I missed the bin folder until JavaRanch
    whacked me upside the head) and getResource() still didn't work.

    The contents of the Java Source folder are compiled if they're source files, copied otherwise (assuming no filter's been put in place to prevent copying), so your images belong under a source folder.

  • Am using short keyboard.  Don't know how to create plus sign which is not on the keyboard. Advice would be much appreciated.

    Am using short keyboard.  Don't know how to create plus sign which is not on the keyboard. There is no number pad. Advice would be much appreciated.

    nicholasmitaka-shi wrote:
    This is a Japanese kana input keyboard, A1242, whioch looks quite as usual except that a few functions have no space on the board and have been ommitted. 
    Is the plus sign really not available on your keyboard at the place indicated on this graphic (to the right of the L key)? You might need to use shift or alt/option or shift+alt/option.
    http://en.wikipedia.org/wiki/File:KB_Japanese.svg

  • I have a newer MacBook Pro with an AMD processor.  It is my understanding that Parallels can only be used on Mac's with Intel Processors.  Is that true and if so does anyone have recommendations about how to have a windows side to my Mac

    I have a newer MacBook Pro with an AMD processor.  It is my understanding that Parallels can only be used on Mac's with Intel Processors.  Is that true and if so does anyone have recommendations about how to have a windows side to my Mac

    Then it either is a pirate clone or you are misinformed.
    Apple Computer has never used AMD processors in its products.
    However, the Graphics Processing Unit (GPU) is a Radeon unit, which is an AMD subsidiary. Parallels, VMWare, VirtualBox will all work fine with the Intel Core i7 or i5 CPU that powers the Mac, and use the AMD Radeon GPU that drives the displays.

  • How to use ora:processXSLT to create HTML with BR tags included?

    I am using a .xsl to create HTML for use as part of a notification process. The issue is that if in the .xsl I include the
    tag, when the transform engine runs to make the HTML it creates <br> tags with out the maching </br> tags. (in doing some reading this seems to be a feature of most XSLT engines) But the result is invalid XML, so when I attempt to assign the output to a variable the process faults and I get the following error:
    XPath expression failed to execute.
    Error while processing xpath expression, the expression is "ora:processXSLT("XML_PURCHASE_ORDER_to_HTML.xsl", bpws:getVariableData("inputVariable", "payload", "/ns1:XML_PURCHASE_ORDER"))", the reason is The XML data is invalid.
    The XML data is invalid; the reason is "Error on line 100 of document : The element type "br" must be terminated by the matching end-tag "
    ". Nested exception: The element type "br" must be terminated by the matching end-tag "
    Message was edited by:
    mlutze
    Message was edited by:
    mlutze
    Message was edited by:
    mlutze

    You can probably set the output format in the stylesheet, like:
    <xsl:output method="txt" indent="no" omit-xml-declaration="yes" />
    if you really don't want to use xhtml. The result might have to be wraped in a cdata block in the bpel flow?
    cheers
    /Stig

  • Can I use my custom board with LPC2378 processor with ULINK2 on Embedded module for ARM and LV.

    Issues in ARM and LV
    Can I use my custom board with LPC2378 processor with ULINK2 on Embedded module for ARM and LV.How can I create my elemental I/O vis or I have to use the existing Keil board vis. Confused. Please help.
    I have LV8.6. Which ver of embedded module for ARM should I buy. Website shows combined price for ARM module and LV. But I already have LV8.6 so what is the cost of module.
    Regards
    Shradha

              If the processor of your development board  is the cortex-M3 core, I think you do not have to buy keil board. Now, there are a lot of OS and emulator suitable for Cortex-M3.
              Operating system I am referring to  is the real time operating system such as keil RTX,uCOS,FreeRTOS,CooCox CoOS and so on. CooCox CoOS is very new, you can get more information from http://coocox.org/ .
              Emulator or debugging tools such as ULINK2,st-link,Jlink,CooCox Colink and so on. CooCox Colink is also very new.  You can download the Colink Plugin from here Colink Plugin . 

Maybe you are looking for