Use Another Tray Configuration Options

Hello, I have a M775z configured to use another tray, so if one A4 tray is empty, the printer will take paper from another A4 tray. Is there an option to specify which trays this applies to? Say I have A4 paper with the company logo in Tray 2 and white A4 paper in Tray 3 and Tray 4. Is there the option to specify that the printer should only autoselect from Tray 3 and 4 for A4 jobs and don't consider Tray 2? Thanks Florian

Print requests usually select the required tray using a combination of Paper Size and Paper Type (with tray selection set to Printer Auto-Select), rather than selecting a specific tray via its identifier. Configure the printer so that it knows there are different Paper Types in the different 'sets' of trays. For example, type = Letterhead for tray 2, and type = Plain for trays 3 and 4.

Similar Messages

[kwin] Failed to activate desktop effects using the given conf options

Every time i logged in kde session, desktop effects are disabled. If I try to change compositing mode I always get this error message:
Failed to activate desktop effects using the given configuration options. Settings will be reverted to their previous values.
Check your X configuration. You may also consider changing advanced options, especially changing the compositing type.
If i delete ~/.kde4 folder and restart the system, then I have default session and I can change compositing mode and all effects are working smoothly. But after next restart effects are gone again and this message occurs
Is there are any ways to investigate/debug step by step this sort of problem? All i have googled about this message is too old or does not helpoing in my case
I had fglrx driver 14.1, then i switched back to open source driver
here is pasbin with all usefull outputs
glxingo, uname, dmesg, xorg session errors and xorg log files
http://pastebin.com/hPSr5vzF
Last edited by AlexRu (2014-02-09 05:24:12)

Same here, every time I log in all the desktop effects were disabled, I tried reinstalling KDE and rebooting for several times but still get the same result. The only fix I know for now is to logout and login but even that does not always work.

I use an external hard drive as a Time Machine back up, but I want to use another external hard drive to save movies, photos on it, but it won't give me the option to save anything on the new external hard drive. Nothing is wrong with the external hard.

I use an external hard drive as a Time Machine back up, but I want to use another external hard drive to save movies, photos on it, but it won't give me the option to save anything on the new external hard drive. Nothing is wrong with the external hard.

Hi Clarkett99,
To use an external hard drive for your iTunes library, see the steps in this article -
iTunes: Back up your iTunes library by copying to an external hard drive
http://support.apple.com/kb/HT1751
iPhoto can be used in a similar way, follow the steps in this previous discussion -
how do I save photos and their albums...: Apple Support Communities
https://discussions.apple.com/thread/3744259
Thanks for using Apple Support Communities.
Best,
Brett L

How can I print from my MacBook Pro to Canon MP560 using rear tray? I can't find that "option" in the print selection possibilities.

How can I print from my MacBook Pro to Canon MP560 using rear tray? I can't find that "option" in the print selection possibilities.

Sure can.
With a document open in Pages, select to print so that you can see the print dialog as shown below.
Note that to see this view, you may need to press the Show Details button in the bottom left corner. In the image above, since I have the expanded view displayed, this button changes to Hide Details
So with the view shown, first change the Presets menu to Default Settings. Then click the Layout drop menu and select Quality & Media. Make the changes you want and then click on the Presets menu and select Save Current Settings as Preset...
At the next window, give the Preset a name and select the Only this Printer radio button and then click OK to save it. That's it.
As for the Preset that you already have, if you no longer want this preset then you can delete it via the Show Presets menu pane that you've used already.

Persistent Flags in Collections: Allow as Configuration Option?

Great way to start the day seeing the launch of LR4 Beta!
As I'm watching the NAPP training videos Scott Kelby makes a point under the Enhancements section re: "persistent flags" that now carry over picks into Collections. When I first started using Lightroom (circa LR1 launch) the lack of this really frustrated me.
Until I realized the brilliance of it.
I will regularly make my picks/flags in the Library and then port these selects over to a Collection. Within that Collection, however, I would review and do sub-picks again (say for a subset of images that would go onto a website, or perhaps for individual selects that would go on for further processing, or those that would be candidates for a book). This was very convenient and I figured it was the basis of the non-persistent design. LR4 takes this away.
So with that in mind, while I recognize this new feature will be welcome by many I am hoping you will consider making it a configurable option under Preferences (Flag Persistence: On/Off) if it is not already there. This way the new version will not interrupt established workflows and users can customize based on their needs.
Thanks.

Please realize that this is a huge deal breaker for a lot of people. Local flags are essential to the point that I would consider not adopting Lightroom 4 in a workflow because of it. I use per-collection flags a lot to make selections or sub-selections. And I'd say 80-90% of the people I have seen using Lightroom in the last few years take advantage of local flags somewhere in their workflow.
Personally, I occasionally have collections of images selected by somebody else and I want to mark my picks from that collection, or the other way round (i.e. someone picks from my collection) and that should have nothing to do with a global pick or reject status.
Or let's say I have a collection "Candidates for Social Media" and I want to pick the ones that actually go online. With global flags, I can't do that since it affects the status in all collections, for instance in one like "Candidates for Print Ads". Putting picks into a new collection instead of using flags has the huge disadvantage that it doesn't show the selection in context of the original set (plus the target collection keyboard shortcut is a toggle, so unless I go through images strictly in sequence, I am in danger of accidently removing something I wanted to add) and makes it hard to look at alternates, go back and change things etc. Plus it's an additional unnecessary collection that clutters the collections panel and makes it slower to find the relevant stuff. I guess I could probably make virtual copies instead of putting images directly into collections to work around the problem, but I'd end up with several (or depending on the type of images a lot of) completely unnecessary virtual copies that clog up the main catalog. Not a viable workaround.
Anothe major issue is that in the process of upgrading catalogs from previous versions into LR4, all the work that has gone into creating local flags in the old catalog would be completely eliminated and inaccessible. That means quite a lot of work like creating lots of additional collections in the old version before the upgrade if I wanted to bring all the existing data safely into LR4.
Proposed solution: Either support both local and global flags in parallel with different icons (which I would prefer), or make the flag behavior a per-catalog or per-collection preference. But simply changing the behavior of flags to global is just a major workflow issue. In fact, when I first encountered the new system in my LR4 test catalog, I thought I had found a major bug.

Dumbing Things Down By Reducing Configurable Options - Your Thoughts?

It occurred to me, while typing up a response to another thread, that this could be a good topic for general discussion.
I sense that the big software companies are starting to put (IMO misguided) effort into reducing the number of configuration options presented to us, the lowly users. I regard this as "dumbing down" the software in the guise of "making it easier to use", but most likely motivated by a desire to reduce support costs where the use of the software by the masses is concerned. The thinking seems to be something like "fewer configuration options means fewer ways for an IQ 90 user to screw it up". These are the users depicted, for example, in Microsoft Windows 7 commercials.
Microsoft seems to be taking the lead on this, eliminating many of the options we've known and loved in past Windows versions. Some examples are the inability to choose "Classic Start Menu", fewer ways to set display elements the way we like them (e.g., spacing of list view in Explorer), and the even the loss of ability to configure right-click options (other than Open) for files in Explorer. Some of these options have just seen the reduction or elimination of the user interface to change them (but they're still in the registry) while others have become simply "baked in" to the code and are no longer configurable at all. Apple seems to build their whole culture on dumbing things down for non-technical users.
Adobe, so far, seems MUCH less guilty of this, but they've done it in a few cases, too. There are, for example, a few user interface changes without offering us an "advanced option" to "keep it the old way, 'cause I liked it that way" - if even for one version to help ease the trouble of changing work habits.
Personally, as a highly technical user I LIKE having options. I know it makes the software more complex, but let's face it: Computer systems are getting more powerful and complex and our ability to engineer ever more complex things is increasing. To use all that new power fully it's nice - nay, necessary - to have options.
A wise man once said, "Make everything as simple as possible, but no simpler."
Adobe, please consider this my request not to eliminate options in future versions of Photoshop just because that's all the rage elsewhere. Resist your urges to reduce support costs by reducing user configurability, and concentrate instead on user education. It's the other guys who have it wrong!
-Noel

function(){return A.apply(null,[this].concat($A(arguments)))}
Reynolds (Mark) wrote:
rubbish.
Y'know, I'm tempted by your trolling to say: "Which, in turn, describes a typical Mac user's post." But I won't.
I'm sorry that laying the policy of your favorite computer company out on the table stings a bit, but hey, it's not like I'm singing Microsoft's praises here either. But make no mistake - BOTH companies seem ever more interested in creating "Computers for Dummies".
I believe I've recognized a real trend in modern operating systems, and while Adobe hasn't shown itself to be going down that path hook, line, and sinker YET, I'm hoping a thread like this might help influence them to think twice about doing so in CS6 and beyond. The big software companies do tend to copy one another. I dunno, maybe there's a "Software Executive Monthly" (written at an 8th grade level, of course) that they all read. Or maybe their people just jump ship a lot.
Hey, like Microsoft, Adobe has fallen into the utter lunacy of contracting technical support to a country halfway around the world where people barely speak the language of the callers. It's not like Adobe is immune to doing stupid things. So let's see if we can help them know we don't want them to be stupid in their product direction.
Whether or not you and I use the same computers, Mark, we agree that oversimplifying Adobe software is not a good idea.
-Noel

Cannot set Start Mode using SQL Server Configuration Manager

I have SQL Server 2012 Express installed on Windows 8.1 and am trying to change the Start Mode to Manual using SQL Server Configuration Manager. However, when I open the Properties dialog and use the drop-down for Start Mode on the Service tab the drop-down
is inoperative. A "vertical bar" appears but no options.
Is there some other way that I can change the Start Mode?

I have SQL Server 2012 Express installed on Windows 8.1 and am trying to change the Start Mode to Manual using SQL Server Configuration Manager. However, when I open the Properties dialog and use the drop-down for Start Mode on the Service tab the drop-down
is inoperative. A "vertical bar" appears but no options.
Is there some other way that I can change the Start Mode?
I have seen that on my laptop as well and it was due to display /resolution setting. Please see if that helps you. BTW, as already answered, services.msc is another way of changing it.
Balmukund Lakhani | Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

Touch screen configuration options for Windows 8.1

Which kind of configuration options are available for the following:
PC configuration:
MSI-GeForce-GTX-750-Ti in PCIex16_1
   ~ DVI-D free
   ~ VGA free
   ~ HDMI connectd to Samsung 24" monitor
NVIDIA Quadro FX 1800 in PCIex16_2
   ~ DisplayPort connected to Samsung 24" monitor
   ~ DVI-D port free
Scenario options(?):
1) medium (21.5") touch screen is used mainly as GUI for command & control
    and two digital displays are used for content
   a) USB 2.0 is fast enough for touch screen i.e. USB 3.0 not needed
   b) touch sreen connected to NVIDIA Quadro FX 1800's DVI-D port
2) medium (21.5") touch screen both as display and touch screen
   a) MSI-GeForce-GTX-750-Ti card HDMI-port connected to touch screen
       (DVI-D port to Samsung 24")
3) small touch screen supported by Windows 8.1
  a) Intuos Pro Pen & Touch Small
https://store.wacom.com/us/ ?
  - is the industry standard the Microsoft Ink API or the Wacom Wintab API ?
4) Microsoft/Nokia smart phone/tablet device as touch screen to Windows 8.1
  a) remote connection to Windows 8.1
Other options ?

4) can one use any Microsoft/Nokia smart phone/table device as touch screen to Windows 8.1 ?
Can you install Remote Desktop Connection on that? Another related tool which would be worth looking at is TeamViewer...
http://www.teamviewer.com/en/download/mobile.aspx
Robert Aldwinckle

Problems using SetCommState to configure external device

Hello, I am trying to use the kernel32.lib function SetCommState to set the communications for and external I/O board. The board is by Sealevel Systems, and they supply VB example code. The problem I have is this: in the code, they run the function GetCommState, then they individually modify the baudrate, bytesize, parity, and stopbits to match the settings fo the device. Finally, they take the updaded settings and input them into the function SetCommState. This all works well in VB, where it is possible to set the baudrate, bytesize, etc. individualy, but in labview, I cannot seem to do this. So I either need to be able to set these individually, or I need to know the protocol for inputting all four parameters into SetCommState through labview. Another option is to use internal labview code (like VISA), but I am not sure that approach would work. Any help would be much appreciated. Thanks,
JOe

If the I/O board presents its self as COM ports under windows (check this out using the Device Mangager) then I suspect that using VISA to configure the commstate should work nicely.

I'm unable to find configuration option under sett...

Hi, I m unable to find configuration option under settings menu. please help. I am using Nokia X2 dual sim
Moderator's Note: Post was moved and changed the title into a subject-related title.

Hi, what would you like to configure?

HT1420 Possibility to use 1 Computer - configured with 2 user accounts - each account uses a different Apple-ID for iTunes authorization ?

I wonder if it is possible to use 1 Computer (Macbook Pro)
- configured with 2 (ore even more) user accounts (i.e. me + my kid)
- and each user account has a different Apple-ID (account) for iTunes purchases & iTunes authorization ?
I woud think that is fine in terms of the underlying license agreement refereing to re-download purchased movies, shows, apps, etc.
However, it seams that there is that miraculous 90 days restriction, which I don't understand, and which allows me only to "authorise" the Computer under one or the other account. The switch is unfortunatelly only possible every 90 days ?!?
Thanks anybody for help
Oliver

The 90 day association doesn't stop you authorising an account, it only stops you from using another account for iTunes Match or automatic downloads or redownloading its past purchases : http://support.apple.com/kb/HT4627
There are a few methods listed on this page for how you could do it e.g. multiple user acounts, same iTunes but you having separate playlists, separate iTunes libraries : http://support.apple.com/kb/HT1495

Using another number for an upgrade for a phone online

Okay, so I'd like to use another phone number in my plan to get an upgrade online. So does anyone know if that is possible and how I could do that. Thanks.

Thanks, Rignu217 and lewisr13, for your replies.
Hello JBerg,
I'm glad to hear you'll be taking advantage of an alternate upgrade on your lines. As previously mentioned, this can be done directly from My Verizon, where you can compare up to five devices and decide which device is perfect for you. Keep in mind you'll first select the line that is eligible for an upgrade. Once this is done you will get an option to choose the line where the device will be activated. I'm sure you'll find this information useful. Thanks for being part of Verizon Wireless.

How can I delete the billing info on my phone? My card is expired and I'm not going to use another one

How can I delete the billing info on my phone? My card is expired and I'm not going to use another one

Tap on your id in Settings > iTunes & App Store and tap on 'View Apple ID' on the popup and log into your account - that should give you a payments link on your account's page.
Changing payment info : http://support.apple.com/kb/HT1918
You might not get the 'none' option if you owe iTunes anything or if you have any pre-orders/subscriptions due : http://support.apple.com/kb/TS5366

Hello i forgot my i cloud password..anyone can help me to find my password.i already make a new apple id..but my icloud use another account..so how to reset my iCloud account plz hel me

hello i forgot my i cloud password..anyone can help me to find my password.i already make a new apple id..but my icloud use another account..so how to reset my iCloud account plz hel me

Making a new Apple ID is not a good idea, since you have to reset the password for that Apple ID anyway. All of your purchases are tied to the Apple ID that the iCloud account was created under. So, you have to retrieve the password for that Apple ID in order to sign into iCloud anyway.
Go to Manage your Apple ID, and click on the Reset Password option (Apple - My Apple ID). Sign on with the Apple ID that the iCloud account was created under, and answer the security questions. If you do not remember the answers to the Security Questions, contact Apple Support to have them reset:
ACCOUNT SECURITY CONTACT NUMBERS
Cheers,
GB

Can i use another storage flash for my apple air mackbook(change from current 128Gb to 256GB without any issue)

Can i use another storage flash for my apple air mackbook(change from current 128Gb to 256GB without any issue)

There are some upgrade options available from do it yourself sites.
See the MBair SSD upgrades on mid way down this page:
http://eshop.macsales.com/shop/SSD/OWC/

Use Another Tray Configuration Options

Similar Messages

Maybe you are looking for