Use as hard drive

Can i use part of my Time Capsule as Hard Drive? I need to save some documents and music that i dont want to have in my computer.

Yes - You may want to Enable Disk Share using the Airport Utility and then selecting the appropriate Disk on the disks tab. Finder can then be used to copy files just as if timecapsule is another network share.
Hope htis helps.

Similar Messages

My external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive. Same thing has happened with Final Cut Express.

My new LaCie external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive.
The same thing happened recently between Final Cut Express and my other LaCie external hard drive used as the Scratch disk. It fixed itself.
I've run out of ideas. Help would be very much appreciated. Thanks.

have you done some searches on FCPx and time machine? Is there a known issue with using a TM drive with FCPx? dunno but ...wait...I'll take 60 sec for you cause I'm just that kind of guy.... google...." fcpx time machine problem" Frist page link
http://www.premiumbeat.com/blog/fcpx-bug-best-practices-for-using-external-hard- drives-and-final-cut-pro-x/
You cannot have time machine backups on your hard drive if you intend to use it in FCPX.
booya!

Using external hard drive connected to desktop as time machine disk for laptop

I recently purchased an external hard drive for the purpose of backing up my laptop and desktop macs. Both are running Mountain Lion (10.7.5). The desktop is physically connected to both the hard drive and to my modem. I have enabled pretty much every sharing option on both the laptop and desktop. When my router crapped out I began just using the internet sharing capabiilty.
I have been able to chose the desktop as the disk for backing up my laptop, but I want to use the hard drive (connected to the desktop) as the disk. I cant figure out how to do this yet. I can easily access the hard drive by using either the "connect as user" option. I thought that perhaps I could broadcast the connection somehow as an airport connection, but I don't know how to, or if this is even possible.
The desktop is a mac mini, and the laptop is a macbook pro. Both were purchased in mid 2011.

This may assist you:
http://pondini.org/TM/4.html
Ciao.

HT201250 If I use Time Machine on my MacBook can I use the hard drive on the same MacBook as the back up drive ?

I want to use Time Machine but instead of using a hard drive outside of the MacBook, would I be able to use the hard drive that is in the computer?
Would I be able to use a memory stick ?

It defeats the purpose of having a backup if you keep it on the same drive. That's your safety if your drive fails.
Also, you should allow about double the space of the volume you are backing up.
EDIT: Time Machine does keep local snapshots on your drive
http://support.apple.com/kb/HT4878
See this for more good TM tips...
http://pondini.org/TM/Home.html

HT201250 I had files stored on a hard drive that were not on my Mac. I used the hard drive for my first Time Machine back up, but it was not enough hard drive space to finish. Now those stored files are gone. Is there any way I can recover them?

I had files stored on a hard drive that were not on my Mac. I used the hard drive for my first Time Machine back up, but it was not enough hard drive space to finish. Now those stored files are gone. Is there any way I can recover them? No, they were not part of previous Time Machine backups, and I have checked both the hard drive the documents were lost on and the new one that I now use for backups. Any suggestions would be helpful, as the lost files are old pictures that are gone forever. :[ Thanks!

1. Yes, if both drives are formatted as Mac OS Extended (Journaled).
2. Reformat the drives if needed, open the Time Machine pane of System Preferences, and remove the drive with the pictures from the list of items set to be excluded.
(110331)

My macbook 13 inch late 2007 model got soaked in wine I bought a pro to replace it , I want to use my hard drive on it as an external , I already purchased the case , now the motherboard I understand gets bad but not the hard drive , right?

my macbook 13 inch late 2007 model got soaked in wine I bought a pro to replace it , I want to use my hard drive froom the old one on the macbook pro and use it as an external , I already purchased the case , now the motherboard I understand gets bad but not the hard drive , right? but everything else still is in there right. ?
I got my case from owc computing
thye used a cloner last time I got the hard drive from them , but the apple had to be working. and now it's just not going to turn on wine is sticky forget about
no worries I enjoyed it for 6 years could have gone longer I have all this extra gig ram memory, and a new digital drive for ith had broke
all I want it my hard drive available at owc and make it a usb drive and acc3sss my stutt ? thansk any ideas and also on how I could sell or use the parts I can salvage, and yay my new pro ix 17 inches silver sleek full ms office i life and i work. included 389 awesome price , no need for new this does awesome . rather than buying an optical drive for 200.00 I got a new computer to me and better for a lot less.
I am gratefful , just please help on the hard drive question as external ,
thanks
just didnt want to make this sound like a sob sitiuation and also inspire others what can be done.
and I then will be able to upgrade to Snow Leopard and i life 2011.

Well as I suspected I love OWC company I pulled out the mac hard drive , they offered me a Macdrive free trial program to check your drive on PC Windows and yesSSSSSSSSSSSSSSSSSSSSSSSS it all there nothing lost
woohooooo , thank you but nothing is dead, when you have faith , this was a prayer answered big time I wanted a pro so much and I get to use my 500 plust 250 plus 120 GB drives all of them
ladies and gentlemen and I get to keep the 2 GB in from my macbook 13 inch and sell all the parts
yipeee
thanks for the support, now the case is Solved. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I want to know about time machine if i can use the hard drive that i use for time machine back up as a normal hard drive too or if it's only for time machine

I want to know about time machine if i can use the hard drive that i use for time machine back up as a normal hard drive too or if it's only for time machine
and if it yes i want to know if i have 1TB hard disk to use the 500gb for time machine and the other 500gb for normal use

thank you very much because i am considering to buy the porsche design hard disk 1TB and i want to have it for normal use and for time machine is a pitty to give 1TB for back up only again thanks and i know seperate the back and the working jobs are better but the i have to have 2 hardisks and i want only 1

Using external hard drive with both iMac and PC

I own an old Dell PC and an iBook, and will soon replace the Dell with an iMac.
I recently bought a 250GB Western Digital external hard drive to back up my data. I would like to use this hard drive to back up all of the files that are on the PC (which I will soon be getting rid of) and also use it for backing up the files on the iBook and, when it arrives, the iMac. In other words, neatly back up all my info onto the back-up drive.
My question is this: can I do this? If not, what is the best way to consolidate all of the data from all of these computers into one place? Will the fact that some data comes from a PC and some from a Mac be a problem? Can you move back-up drives fromone computer to another? The photos on my PC are saved in Picasa, whereas the photos on the iBook are in iTunes. My iPod music files are all on the PC in iTunes.
Any advice about backing all this stuff up in a user friendly way would be greatly appreciated.
By the way, I have heard that there are ways to reformat external drives, to partition them, and to "raid" them. Can someone explain what this all means?
Thanks.
iBook G4

Hello,
Your best option would be to store the files from your PC on the drive with the drive in the FAT32 format. Then, copy the files to your Mac's Internal hard drive.
Now, once the files are stored safely on your Mac's internal hard drive, you can safely reformat the external drive as a Mac OS X Extended (Journaled) drive. That will be the best format to use for long-term purposes with your Mac.
Many OS X file types (such as many PKG files) cannot be stored / written to a FAT32 volume. So, a FAT32 drive would not be suitable for backing-up an entire OS X hard drive (or even many of the system updates that you might download).
So, that's how I'd do it. Use the drive as a FAT32 just long enough to get the files moved to your Mac.
Once the drive is re-formatted in the Native Mac format, then you could copy the files back to it, and any other Mac files that you wanted to back-up to it for safe-keeping.
Personally, I would re-partition it in at least two pieces on the Mac. One to hold data / personal files for safe-keeping, and a second bootable partition for a full system / OS X backup.
You can read a bit more about this in some of my previous discussions here:
http://discussions.apple.com/thread.jspa?messageID=2536703&#2536703
http://discussions.apple.com/thread.jspa?messageID=2597825&#2597825
http://discussions.apple.com/thread.jspa?messageID=2632566&#2632566
Read through each of those three discussions and you'll see how they all come together and provide you with a good solution for backing-up your hard drive.
I hope you don't mind my linking you to those other discussions, but it just seemed more practical than re-typing what I had already said all over again
Also, if you are getting one of the new Intel iMac systems, and you want to be able to create a bootable backup as described in those posts, be sure to format your external hard drive using the new GUID format. That will provide you with the best solution.
I hope this helps.
Let us know if you have other questions.
P.S., if you'd like, go ahead and click the "Helpful" or "Solved" buttons on any of the posts / replies above if you feel they were helpful or adequately answered your question.

Why can't my Mac Pro use my hard drive(s)?

Ok, so I'm using a 2008 mac pro (some specifics are listed at the bottom) and I'm having trouble with my hard drive(s). The hard drive I've been using is full, and sometimes the System Information will show that is full of Audio, Movies, Photos, Apps, Backups or it's just chuck full of "Other."
But the problem is that my computer stopped using one of my hard drives a while back. It was called "Bay 5." I've opened up the computer to look at the hard drives and I actually have three. Ever since I lost Bay 5, I lost my Adobe Creative Suite and I've gotten a notification that says "The disk you inserted was not readable by this computer." But the drives are the same type as the Macintosh HD, only with 500 GB each. I've clicked "Initialize" on this notification (sorry, I tried to take screen shots but suddenly my computer says "You don't have permission to save files in the location where screen shots are stored") and it pulls up the disc utility and has a drive called "Media," (but only half the time). Bay 5 is not there and neither is the other drive that's there.
Wow, that screen shot thing is new. Maybe you guys could help me with that problem, too.
I'm lost. I've looked at 15 min. long youtube videos but none of them have helped. I just want to be able to use those hard drives. I've tried holding the D key at start-up so that the computer can do the Hardware check (or whatever it's called) but it just pulls up a flashing folder with a question mark.
I'd really appreciate some help.
Processor: 2 x 2.66 GHz Dual-Core Intel Xeon
Memory: 4 GB 667 MHz DDR2 FB-DIMM
Software: Mac OS X Lion 10.7.5 (11G63)

Buy Carbon Copy Cloner and some new drives. Make sure you have two backup sets and are using TimeMachine as well.
Reset SMC
You have a 1,1 2006 model. It is low on memory, which is cheap at $25 2x2GB now on Amazon
Consider that drives fail and you may have some drives that are more than 4 years old.
If you want, and have the money, consider investing in Disk Warrior 4.4 or 5.0
Data Rescue 4 has a demo and would try to find files, would need a recovery drive volume of course also.
Invest in an SSD for system boot drive, $119 / 250GB, and use a WD Black 1-2TB for data $120, another for TimeMachine.
Adobe CS needs more memory that you have.
AHT is not going to help and is on the OEM DVD with 10.4.x that it came with but what you need is boot from another drive or recovery mode and use Disk Utility (and or Disk Warrior). Single User Mode and 'fsck" is also useful as would Safe Boot. But you need a working copy (clone) backup too.
I like to have a nice small "Emergency" boot drive with just the minimum for system maintenance, 20GB is fine, some users create a USB flash drive but FireWire or USB2 work well. Or just designate and create a small 20GB volume on any of your other drives.

How do I use external hard drive

how do I use external hard drive and Photos? I keep getting a msg that there is not enough free space on your photo library volume - i even bought 500Gb of space on iCloud.... that didn't even work please help

1. Drag the library to a volume formatted as Mac OS Extended, launch Photos with the Option key held down, select Other Library, and choose it. Alternatively, drag it to the Photos icon in the Dock.
2. iCloud storage space is separate from that on the computer.
(126243)

HT203167 Moved iTunes library from one computer to another using external hard drive. Cannot play many files. Says they are missing but locates them in an archive file but still won't play them. Are the files themselves part of the .itl files?

Moved iTunes library from old computer (PC Windows 7) to new (PC Window 8) using external hard drive. Library listing shows all music but can only play a fraction of it. On the ones it cannot play it asks to locate, then refers to an archived version (an .itl file), and still cannot play them. Do I just need to copy the archived .itl over, or is that not where the actual media are (do the actual media files even exist on the new computer?)? Any advice or information on this would be helpful.

*Also...is there any way I can filter out all the tracks with the ! so I can delete the unplaying copies as they're taking up room in my iTunes? I know how to find duplicates, but then I have to go and delete each one individually...*
*Thank you!*

My final cut is running extremely slow after having for 6 months. I use external hard drives and save nothing on my computer. it takes a long time to render now. do you think something is wrong with computer. took it to mac store but they fail to help

my final cut is running extremely slow after having for 6 months. I use external hard drives and save nothing on my computer. it takes a long time to render now. do you think something is wrong with computer. took it to mac store but they fail to help me. I have a 13 inch mac book pro 10.6.8 8gb 2.3 gfz intel core i5

What did Apple tell you about what they did (or did not) find here?
See if working on the main disk is any faster.
USB2 is glacial, as I/O interconnects go. And USB2 disks have been known to fail, or sometimes to drop back to USB1 speeds, too. FireWire 800 is substantially faster than USB2, but still not as fast as the internal drive connections can provide.
Put another way, start varying your configuration, and see which configuration changes (still) have the problem, and which don't.

Can you use external hard drives with the HP Omni 10 5600US

Since this a Windows tablet, can you use external hard drives with the HP Omni 10 5600US?
I know there is a micro-sd reader for additional storage but can you use the usb for external hard drives like a regular pc?
I tried looking at the spec's for this tablet and it said the usb port was host only. I'm not sure what that means exactly.

Yes you can. You'll need to purchase a USB OTG (on-the-go) cable. I recommend using a drive that has its own power supply but I've successfully used small USB powered drives also.

Unable to print or use external hard drives via Airport Extreme

Hi.
I installed Airport Extreme with no problems. Airport utility program shows everything is ok, and shows my printer (Canon LBP5100) and my two external hard drives which are connected to Airport via USB-hub.
My airport extreme is connected to ADSL-router and is providing another WLAN in my house. The internet connection works fine, but I couldn't print nor use my hard drives. I installed the printer using the bonjour guided printer installation tool.
I haven't heard that my printer would not be compatible with airport extreme so was my airport purchase totally unnecessary or what tricks should I use to make the printer and the external hard drives be available?
Sincerely,
Jarkko
Finland

Hi.
Thank you for your reply. No help though.
Printer gives me this warning:
The network cable is not connected, or the printer is not turned on. Check these items.
And still the hard drives are not visible anywhere.

Can I backup and restore my itunes media using a hard drive?

Can I backup and restore files if I used a hard drive?
I do not want to backup my entire itunes library of >200 GB to individual CDs and DVDs, if I can help it; it will take forever. Hence the above question.
Thanks!

The answer to your question is yes, though anyone who posts to this group would not be asking that question. I think you might be looking for the iTunes discussions group?
RealDave

Is it possible to use multiple hard drives with iphoto?

I am pretty new to Mac's so bear with me, I used to use multiple hard drives on my pc with my photos seperated by catagory in different hard drives. Is it possible to run iphoto with multiple hard drives without the photos loading onto my Imac? If so, How do I set it up. I have tried importing to a external drive, but when I check the file path of the photos it shows my Imac hd in the address. I seriously dont know why I cant just add the external hard drive as a library and have Iphoto work, Help

There are instructions - and not the caveats - on how to do what you want below.
However, you'e not quite grasping iPhoto:
I used to use multiple hard drives on my pc with my photos seperated by catagory in different hard drives.
When you do this, you're using the Finder (or file manager) to categorise the photos. All well and good, but why? That's exactly iPhoto's job. iPhoto is a database designed to help you manage your pics - including categorising them.
Anyway:
*How to do it:*
Simply go to iPhoto Menu -> Preferences -> Advanced and uncheck 'Copy Files to the iPhoto Library on Import'.
*What Happens:*
Now iPhoto will not copy the files, but rather simply reference them on your HD. To do this it will create an alias in the Originals Folder that points to your file. It will still create a thumbnail and, if you modify the pics, a Modified version within the iPhoto Library Folder.
*Some things to consider:*
1. Importing and deleting pics are more complex procedures. You have to to put the files where they will be stored before importing them. When you delete them you'll need to remove the files from the HD yourself.
2. You cannot move or rename the files on your system or iPhoto will lose track of them on systems prior to 10.5 and iPhoto 08. Even with the later versions issues can still arise if you move the referenced files to new volumes or between volumes.
3. Most importantly, migrating to a new disk or computer can be much more complex.
4. *Because iPhoto has no tools for managing Referenced Files, if, for some reason, the path to the photos changes then you could find yourself resolving aliases for +each photo in the Library+ one by one.*
My own opinion:
I've yet to see a good reason to run iPhoto in referenced mode unless you're using two photo organisers
If disk space is an issue, you can run an entire iPhoto Library from an external disk:
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
If you're concerned about accessing the files, There are many, many ways to access your files in iPhoto:
*For Users of 10.5 and later*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and later* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
For users of 10.6 and later:
You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and later:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
If you really want to spread your photos across volumes like this, Aperture would be a better fit.
Regards
TD

Use as hard drive

Similar Messages

Maybe you are looking for