Use Buttons as counters, instead of numbers

I have a basic slideshow, with previews and next buttons replacing the arrow text (>). What i am trying to do now, is to replace the counter, with buttons.  I have 5 photos, and i would like to link all 5 photos to a different button at the bottom of the screen.  The slideshow can still autoplay, but if a user wants to see a photo again, they click the corisponding button to go back to it.  Each button changes to a different color when active, and have a role over bar that connect to them all.  All of that is doable with the place photoshop button, but i don't know how to link the buttons to the photos.
Any help out?
Thanks

Hi,
Unfortunately, there is no out of the box solution to replace the counters with buttons and link them with the respective slideshow image at the moment,
Regards,
Aish

Similar Messages

  • Android system using 34-40% battery instead of 6-10%

    android system using 34-40% battery instead of 6-10%. Battery graph has awake solid. Had google update that fixed this problem bout 10days ago and now it's started again. It's started and fixed itself 3times now. This time no google update but it's started again

    Just upgrades google play services and 198fw update some uninstalling reinstalling apps google play services gapps package and couple of other google updates fixed problem. But got 1 new prob speed dual list. When you have it open hit home the app open button go back to phone dialer the speed dual list will be blank. Hit home again the app button swipe phone dialer closed then re open via shortcut they come back. So big big problem fixed. Also worked similar fix on mates z with similar prib

  • Is it possible to use booleans to build a VI that uses buttons to switch between screens (3 only) while the other screens disappear?

    As a beginner, I need help figuring out how to build a simply VI that uses boolean logic to switch between three different screens. I need a "Home" screen, the next screen which has a button to go back "Home" and a third screen which has two buttons to go "Home" and "Previous Screen". Can someone help me with a simple block diagram?

    Hi,
    Or put the data in three tab controls. The tabs itself are hidden. The
    program switches between the tab sheet if one of the buttons is pressed.
    The buttons are best not copied, e.g. the same buttons are used in every tab
    sheet (buttons hover above the tab, a black shadow will apear). If the first
    sheet is shown, button 2 and 3 are hidden, sheet two: only button 3 is
    hidden, sheet three no button is hidden.
    Showing the tabs allows the user to choose the views directlly. The button
    logic is not needed anymore. But you'll have to live with a simple tab
    sheet, instead of a fancy button system!
    Regards,
    Wiebe.
    "Jason R" wrote in message
    news:[email protected]...
    > Another solution if you want to avoid property-node hell...
    >
    > Divide your screen into 1/4ths. That is, make your FP 4x larger than
    > your desktop.
    >
    > Place screen 1 on the upper left quadrant.
    > Place screen 2 on the upper right quadrant.
    > Place screen 3 on the lower left quadrant.
    > Screen 4 (lower right quadrant) is unused.
    >
    > Disable the ability to scroll at run time.
    >
    > As the user clicks buttons, use the properties of this vi to move what
    > the user can see on the front panel.
    >
    > Cheating? yep. Easier? yep.
    >
    > Hope this helps! =)
    >
    > btw - be sure not to update the FP controls when they are not visible,
    > or this will eat processor cycles.
    >
    > Sincerely,
    > Jason G Richmond
    > Project Engineer II and LVAAD Instructor
    > VI Engineering
    > [email protected] (domain should be vieng.com (no A's))
    >
    >
    > missileman wrote:
    > > Is it possible to use booleans to build a VI that uses buttons to
    > > switch between screens (3 only) while the other screens disappear?
    > >
    > > As a beginner, I need help figuring out how to build a simply VI that
    > > uses boolean logic to switch between three different screens. I need a
    > > "Home" screen, the next screen which has a button to go back "Home"
    > > and a third screen which has two buttons to go "Home" and "Previous
    > > Screen". Can someone help me with a simple block diagram?
    >
    >

  • How can I sort a table using more than one column in Numbers or in Pages?

    How can I sort a table using more than one column in Numbers or in Pages?

    Hi Ron,
    On the right side of the Toolbar click the Sort and Filter button, then select Sort.
    You can then set up a multiple column sort.
    Click Add A Column, Specify the sort for that column, Repeat.
    Jerry

  • Using a registered domain instead of .Mac standard URL

    Is it possible to use a registered domain name that I own (the name of my business) instead of the standard .Mac string URL?
    iMac G5   Mac OS X (10.4.5)  

    Welcome to the discussions, Firestorm.
    If the company that has your domain does forwarding, you can have them forward your domain to your. Mac site. That's how I did http://www.makentosh.com.
    Also, if you want to use the .Mac counters, you have to use normal forwarding and not stealth forwarding.

  • I'm using Big date theme but the numbers on the date is cut off on top.  I'm on iphoto 11 and OS 10.8.2.  anyone else having this issue??

    I'm using Big date theme but the numbers on the date is cut off on top.  I'm on iphoto 11 and OS 10.8.2.  anyone else having this issue??

    OK try the following: make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
    or with Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
    Data/Library/Caches/com.apple.iPhoto folder
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    NOTE 2:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.

  • When I try to share a Numbers spreadsheet with other Mac users, (via iMessages) it doesn't open on Numbers app but instead on Numbers for iCloud beta, on their browser.

    When I try to share a Numbers spreadsheet with other Mac users, (via iMessages) it doesn't open on Numbers app but instead on Numbers for iCloud beta, on their browser. and worse all the letters appear out of format and unreadable.
    Is there any option that i'm getting wrong
    How can we solve this.
    Usualy we use Google drive documents to share some spreadsheets, but we wanted to share the same document with numbers (that's much better) but it doesn't work as easily as in google drive and doesn't even remotely works how it was supposed.

    When I try to share a Numbers spreadsheet with other Mac users, (via iMessages) it doesn't open on Numbers app but instead on Numbers for iCloud beta, on their browser. and worse all the letters appear out of format and unreadable.
    Don't know why those letters wouldn't display properly; maybe something to do with their settings at Safari > Preferences > Advanced > Default Encoding or similar setting in whatever browser they are using. But it's really easy for them to download the document via the "wrench" in the Numbers for iCloud menu. Then they can open it in the Numbers app.
    For "real-time" collaboration, I think you all need to be accessing Numbers for iCloud via the browser.
    SG

  • How do I simultaneo​usly measure two frequencie​s using the two counters on a CompactDAQ chassis?

    I am using two encoders as speed wheels to compare two different speeds simultaneously.  I have the encoders connected to the two counter inputs of my CompactDAQ chassis using NI 9423 cards in order to measure the frequencies produced be each and then I convert that data into speed.  How do I efficiently measure these frequencies simultaneously?  I say efficiently because the only way I can get it to work right now is to create a task for the first encoder, gather my frequency data, clear the task for that encoder and then move onto the next.  This is a slow process and therefore the measurements are not exactly simultaneous.  If I try to measure them simultaneously I get resource errors.

    Hey Kevin,
    Thank you for the information. The cDAQ-9172 has two counters on the chassis itself.  There are no counters on the actual module.  What this means is when you access Counter 0 using a module in slot5 (for example), you are actually accessing Counter 0 on the backplane of the chassis.  This is why you are getting the resource is reserved error.  If you have the other input frequency connected to the second counter of the chassis, you just need to access it using Counter 1 instead of Counter 0.
    In your code, for the Counter 2 input, you have "cDAQ1Mod6/ctr0".  If you just change that to "cDAQ1Mod6/ctr1", this will get rid of your "resource is reserved error.  Also, to get both your tasks to be a little more closely synchronized, you should probably use a sequence structure to be sure that they start together. In the code below, I have used two seperate counters on two different modules and synchronized them.  If you are using the same module you would just need to change the counter inputs to represent the two different counters on the same module.
    Hope that helps.
    Regards,
    Message Edited by Raajit L on 04-02-2007 11:00 AM
    Raajit L
    National Instruments
    Attachments:
    Counter Parallel Tasks.jpg ‏66 KB

  • Delete button deletes forward instead of backward

    All of a sudden my delete button deletes forward instead of backward on my bluetooth keyboard that I'm using with my G% tower.  Any ideas how to get it back?

    Curious, perhaps Spark could help with the problem...
    http://www.shadowlab.org/Software/spark.php

  • Linking articles using buttons

    I'm trying to link articles using buttons, so that I can quickly navigate through an app in the same way you can if you were to use a button to a specific page number in the same document I'm trying to link to a different article.
    I've tried using bookmarks and hyperlinks to only fail. Any tips? What am I doing wrong?
    Thanks.

    I tried renaming the scenes to numbers to see if that was the case but it still returns the same error as before, ive checked all wordings of scenes and the AS, all of its correct. Could it be i've missed code out from somewhere? Could frame labels cause it to not work?

  • How do I use my new mac instead of old one with my iphone 4

    I recently just got a new Mac and wont be able to use my old Mac because I will be leaving for college in a couple weeks. My iPhone 4 is set up with my old Mac. How do i get it to sync with my new Mac now instead of my old one? Because of space on my iPhone, I manually manage all of the music on it. When I have my iPhone connected to my new mac, it shows up in iTunes but it wont let me manage my music.

    You can use Migration Assistant to migrate your old Home folder to your new computer. Or, if all you want is your iTunes Library, then copy the /Home/Music/iTunes/ folder to an external hard drive. Then move the external drive to the new computer and restore the folder to the /Home/Music/ folder on the new computer overwriting the one that's now there.
    If you have never started up the new computer, then you can use the Setup Assistant instead of Migration Assistant to transfer your old Home folder to the new computer.
    The two computers must be connected by Firewire cable or Thunderbolt cable depending upon what they both support. The old computer is booted into Target Disk Mode while the new computer is booted normally. In Setup or Migration Assistant you would be selecting the option to migrate from another Mac or disk drive.

  • I bought an iTunes gift card, reedemed it, and when i try to buy a game it doesn't let me use my credits, but instead I have to buy it using my Visa card?

    I bought an iTunes gift card, reedemed it, and when i try to buy a game it doesn't let me use my credits, but instead I have to buy it using my Visa card?

    What exactly do you see when trying to buy a game, what messages do you get on-screen ?
    If it's an account that you've just created then unless the instructions on this page are followed when creating an account : Create an iTunes Store, App Store, or iBooks Store account without a credit card or other payment method
    then credit card details will need to be entered before the account can be used to download any item from the store. You should be able to remove the card after entering its details.
    If you are getting a prompt to review the account then you could see if this post by mountaingoatgirl lets you do so without needing to enter credit card details : https://discussions.apple.com/message/24303054#24303054

  • How can i use Button in BEx  7.0

    Dear Folks,
    Could you help me please ..
    In BI 7.0, for BEx analyzer i see we can use button, combo box, analysis grid.
    If i have a requirement like this:
    1. I have sales report, where it has information about sales person.
    2. And i want to filter that report with the sales person that i choose from combo box.
    For that requirement, i tried to :
    1. I Create a query to Sales info-provider for displaying sales.
    2. I Create a query to either to MD Sales person / Sales info-provider in order to get Sales persons data.
    3. I assign point no 1 to Analysis Grid.
    4. I assign point no 2 to Combo box.
    My questions are:
    a. Is my techniques correct ??
    b. How can i use button to execute filter into the corresponding report ???
    c. Is there any tutorial regarding this ?? Could you share it to me please ..
    Really need your guidances..
    regards,
    Niel..

    Hi Niel,
    You can use the method you specified.
    In Bex Analyzer you have design mode where you can have the following items Button, Analysis Grid and Combo box.
    To work with the button you need to use the Command Wizard which consists of pre-defined functions, out of those select the one which suits your requirement and supply the parameters. As it is done thorugh a Wizard it would be easy to do.
    Also,
    The Button Name displays the name of the button, which is generated automatically and is unique. This name is used on the BEx Analyzer Design Toolbar menu to refer to a particular instance of the button.
    · Range u2013 Manipulate coordinates for a cell or cells in this field to move or resize the button.
    · Button Text - The text (caption) you want to display on the button. You can use this to describe the command the button executes.
    · Command Range (optional) - Specify a three-column range of cells in the worksheet that contains command parameters. In these cells, you provide the same parameters (Name, Index, and Value) as in the Static Parameters, but in the worksheet these can be variable, changing during
    navigation based on query results or on a value you manually specify.
    Button in Bex analyzer
    Regards,
    Neelesh Jain.

  • Error BEA-000438 - Unable to load performance pack. Using Java I/O instead.

    On a Solaris 9 machime, 64 bits architecture, j2sdk1.4.2_08, Weblogic Server 8.1 SP2
              when I try to deploy the application, launching java wiht "-d64" option I get :
              <Jun 22, 2005 12:12:41 PM CEST> <Error> <Socket> <BEA-000438> <Unable to load performance pack. Using Java I/O instead.
              Please ensure that libmuxer library is in
              :'/export/home/j2se/j2sdk1.4.2_08/jre/lib/sparcv9/server:/export/home/j2se/j2sdk1.4.2_08/jre/lib/sparcv9:/export/home/Aplics/Apl1/WEB-INF/lib::/usr/local/bea/weblogic81/server/lib/solaris:/usr/local/bea/weblogic81/server/lib/solaris/oci920_8:/usr/lib'
              libmuxer exist on /usr/local/bea/weblogic81/server/lib/solaris
              Any idea?
              Thanks

              Can you post more details ?
              Sergi
              Jiffy <[email protected]> wrote:
              >error:
              > <2004-3-12 %u4E0B%u534815%u65F648%u520654%u79D2 CST> <Error> <Socket>
              ><BEA-000438> <Unable to load performance pack. Using Java I/O instead.
              >Please ensure that wlntio.dll is in: 'D:D:/bea/weblogic81/server/bin'
              >>
              

  • I'm using iPhoto 11, and instead of seeing my images in the main view, I see only outlines. (Had same problem in iPhoto 10 before upgrade to Lion Help!

    I'm using iPhoto 11, and instead of seeing my images in the main view, I see only outlines. (Had same problem in iPhoto 10 before upgrade to Lion Help!
    I'm on a Macbook Pro and all of my software is up-to-date.
    The photos and events, etc. appear to be present in my photo library, but I cannot see the actual images--only an outlined placeholder.

    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. This can take 3 or 4 goes to work.

Maybe you are looking for