Use case for describing a web service

Dear all,
I have a fundamental question for describing a web service.
An analyst will first write (1) a use case for describing the web service and (2) wsdl and xsd files for describing the web service.
As a developer, I would say that artifact (2) is enough. As an analyst, I would still need to document the requirement in the format of use case specification. However, it is not clear for me what should be put in this use case specification and what is the added value of such a use case.
Have you any sample example of this kind of use case in order to describe a web service?
Thanks in advance.
Pengyou

wpafbuser1 wrote:
First, don't post twice. I'd rather see you bump a post then repost the same question.
Have you any sample example of this kind of use case in order to describe a web service?First, searching Google will show you millions of use cases you can use as examples. Second, why would you think writing a use case for a Web Service would be any different than any other use case?Sorry for posting twice. I thought the first one failed due to a system error but I was wrong.
From millions of use case I can not find a "good" one.
I have in fact two conceptual questions:
1. I have not much to say about the flow of events. It is simply a request and a response. This is much simpler than a "normal" use case. Am I right?
2. However, I don't know where to put the description of business logic: 2.1 the data sets to be put in the request and response; 2.2 the business logic to construct the response from the request.
I would appreciate any hint or discussion.
Pengyou

Similar Messages

Help using CollatorEntry for Repository Framework Web Services

Hi All,
Just wondering what are the pre-requisites needed for my KM repository before I can use the collator functionality in web services such as the findResrouces function from the Repository Framework web service?
Should my repository be setup with an index or something? I've been reading the Javadocs and trying a few things out using the WSDL navigator but I have no idea what values I should be putting in for CollatorEntry object. What "name" values should I be putting which correspond to properties?
Could anyone please provide example inputs to put into the WS Navigator say for the method findResources?
When I test out the findResources method
when I input rid: /documents/
CollatorEntries - element1 - name = displayname
ascending = false
I keep getting the error:
Unable to compare: /documents, /documents/.system
hmmm searching SDN doesn't really seem to come up with much information except Collators aren't being used in client applications so they won't be discussed in detail
Any help would be appreciated!

So I have figured out that I need to be putting in the namespace+localname into this collator entry name field but I have been unable to apply an ascending sort based on the accessRid.
I've found using the findResources operation I am getting back resource objects that are not in a file heiarchal order (ie. nodes further down the file directory are being returned before their parentRids.)
Is there a way for me to ensure that findResources returns a sorted array that starts from the top of the document tree and each resource object returned is in the same order as what I see in KM content browser?
Must be a setting or a property that I am missing, when I do a getOrderMechanism operation I notice it is an unordered type. I can't set server order mechanism as its not supported yet....
Does anyone have any suggestions?

How to install eclipse and MyEclipse and use it for jsp-servlet-web service

hi ,
please help me to install eclipse 3.1 and How to integrate MyEclipse to do jsp-servlet programming and web services.
please also help me to include application server like tomcat and axis and use that environment in MyEclipse ide.
please help me.....

At the time of installation , you can't change SID XE.
After installation, you can add another service name
Check following thread for more details
Re: How to create service on Oracle 10g XE
- Virag Sharma
http://virag.sharma.googlepages.com
http://viragsharma.blogspot.com

Problems with Use Cases for Process Integration

Hi there,
I'm reading the "Simple Use Cases for Process Integration" (http://service.sap.com/xi -> Media Library ->
Documentation) and try to setup the variants 1 up to 4. As per description I created the Technical and Business Systems in the SLD. Everything worked fine. But I can't find the created business systems in the Integration Directory When I click on Objects tab page -> Services without party and and choose Assign Business System, I can't see the desired business systems in the list. What am I doing wrong?
Cheers
Marc

hi Marc,
maybe the business system was already assigned?
1. check if the business system exists in the SLD
2. check if the business system exists in directory
3. refresh SLD cache (in directory menu)
4. try assigning once more
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Practical Enterprise Service Bus Use Cases for SOA & writing for Dev2Dev

Dev2Dev has just published:
Practical Enterprise Service Bus Use Cases for SOA
http://dev2dev.bea.com/pub/a/2006/06/service-bus-use-cases.html
"What is the role of an ESB within SOA? In this article, Kenny Shin provides some practical advice, illustrating how an ESB adds aspects such as transport security, data validation, and messaging patterns to Web services"
Check it out. If you'd like to write for Dev2Dev, please contact me - I have plenty of ALSB topics to choose from.
Regards,
Jon
Jon Mountjoy - http://dev2dev.bea.com/pub/au/13

I also think that same way. I do not know what is so apecial about BEA Aqualogic ESB and other market matured ESB products such as TIBCO & SONIC. The samples which BEA has given in their evaluation guide are very simplistic. BEA should do more to provide extensive knowledge/features about their Aqualogic line of products.

Use BizTalk 2006 as a proxy for an external Web Service

Hi
We have a solution that is going to work just as a proxy for an external Web Service.
It works like this:
1. We have a Request-Response receive port that receives the calls for the WS.
2. Different Static Solicit-Response ports that have filters for each method in the WS receive the requests and then send them to the external WS.
3. The response from the external WS is then sendt back to the caller via the Request-Response port in point 1.
This generally works like it should. The only problem i have is when the external WS returns a Fault message. I get this fault from the external WS:
<s:Fault xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"><faultcode>s:Client</faultcode><faultstring xml:lang="nb-NO">Some error message the caller should see.</faultstring><detail><GenericFault
xmlns="http://register.test.com/Common" xmlns:i="http://www.w3.org/2001/XMLSchema-instance"><ErrorCode>SomthingWentWrong</ErrorCode><Message>Some error message the caller should see.</Message></GenericFault></detail></s:Fault>
This message then failes on BizTalk and BizTalk returns this Fault message to the caller:
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><SOAP:Body><SOAP:Fault><faultcode>Microsoft BizTalk Server Negative Acknowledgment
</faultcode><faultstring>An error occurred while processing the message, refer to the details section for more information </faultstring><faultactor>/Hemit.BizTalk.NHN.Position.ws/IPositionService.asmx</faultactor><detail><ns0:NACK
Type="NACK" xmlns:ns0="http://schema.microsoft.com/BizTalk/2003/NACKMessage.xsd"><NAckID>{7AC314FE-2CA3-44AE-8208-180495500481}</NAckID><ErrorCode>0xc0c016b7</ErrorCode><ErrorCategory>0</ErrorCategory><ErrorDescription>There
is an error in XML document (1, 2).</ErrorDescription><ErrorDetail><Fault xmlns='http://schemas.xmlsoap.org/soap/envelope/'> was not expected.</ErrorDetail></ns0:NACK></detail></SOAP:Fault></SOAP:Body></SOAP:Envelope>
So the problem seems to be that the Request-Response port in point one will ONLY accept the real response that is specified in the response schema for that particular method, and not a Fault. And when it receives a fault, it generates its own Fault saying
a Fault message was not expected.
Does anyone know how i can be able to send the actual fault from the external WS all the way back to the caller on the inside?
I know how to do it with an orchestration, but can not figure out how to get it done just with the ports.
Kind regars
John Viggo

Hi John,
Enable Propagate fault message
on the WCF solict –response port.
For the two-way send port, you can choose whether to forward
SOAP fault messages on to the original caller over a solicit-response send port by selecting
Propagate fault message. If this option is not selected, BizTalk Server will generate a NACK. What you see is the NACK.
If it is selected, BizTalk Server will treat the message as a valid WCF response message from the external service and the response message will not be suspended because it is propagated.
Then you need to map the fault message to the actual response in the map. Set this Fault-Message to Caller-Response map in the outbound map of the Requeust-Response port.
In this case of messaging-only scenario, this method shall help in handling the fault message and passing fault details back to the caller. Refer the following articles for more details.
Synchronous web services calls and Faults
BizTalk and
SOAPFault
version issues
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful.

Using Native Oracle XML DB Web Services - REST POST web service possible?

My goal is to expose some pl/sql procedures as a REST web services.
The Database is 11gR2
The request method needs to be a POST (not GET as a request will perform insert/updates ) - the request body will contain a xml structure
Have setup XMLDB Database-native Web Services as per
11g documentation "Using Native Oracle XML DB Web Services"
It seems this setup support only SOAP requests!?
RESTful webservice with GET is (sort of) supported using
Embedded PL/SQL Gateway as describer here:
http://ora-00001.blogspot.com/2009/07/creating-rest-web-service-with-plsql.html
Although no support for POST
Obviously the post is from 2009 so just want to know if anything changed since.
Has anyone found a way to expose pl/sql procedures using XML DB or other approach as a REST POST web services?
(As the relative low number of calls/hour and also the aim to have the least amount of moving parts therefor looking for a DB centric solution)
Thanks
Pete

I think the post referred to was more an exercise of what could be achieved. The quickest way, nowadays, to get this done with not too much hassle is via APEX
http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35128/restful_svc.htm
M.

Problem generating stubs for Java EJB web service deployed in OAS

I created an EJB web service and I've successfully deployed it in my Oracle App Server. Some of the methods work fine but others produce the ff error:
org.apache.soap.SOAPException - java.lang.IllegalArgumentException: No Serializer found to serialize [classname] using encoding style [encoding]It seems that the objects specified as parameters in the web service methods exposed are the only ones that had stubs generated for them. Other objects I use, which are usually wrapped inside a Vector, did not have generated stubs.
Example:
public String loginUser(UserDTO userDTO) throws RemoteException, NamingException, SQLException;
public String addItems (Vector vecItems) throws RemoteException, NamingException, SQLException; // where vecItems is a collection of ItemDTO objects In this scenario, stubs were generated for the UserDTO class, but not for the ItemDTO class. In effect, calling the addItems method resulted to the exception I mentioned above.
I did a workaround wherein I declared a dummy method which accepted all the types of objects I needed as parameters so all the necessary stubs can be generated, but this fix doesn't feel like it's the proper solution to my problem.
If anyone can help me, it would be greatly appreciated. Thanks!

Crossposted:
Problem generating stubs for Java EJB web service deployed in OAS

Calculations in Xcelsius using data generated by a Web Service Connection

Hi,
I have set up a web service connection to pull in 4 columns of data: 1. CATEGORY 2. SUBCATEGORY 3. PRODUCT TYPE   4.#OFCALLS. There will be anywhere from 1 to 500 rows of data depending on day of week and time of day. The web service sorts the list by #OFCALLS descending. The OUTPUT VALUES of the web service connection are mapped to cells A19:D518.
Formulas in the spreadsheet take the Top 10 from the list and populate it to cells A4:D13. A formula in cell D15 sums the #OFCALLS for the entire web service connection output (A19:D518).
The data in A4:D15 is mapped to a spreadsheet table on my canvas.   When the report generates, the data from the TOP 10 of the web service connection populates properly, but the cell that should reflect the TOTAL#OFCALLS (D15) shows zero.
Is it not possible to do additional calculations in the spreadsheet based on data generated by the web service connection? A major difference between using an XML Map and a Web Service Connection is the XML Map actually populates the spreadsheet with the new data when it is refreshed. The Web Service connection data never actually appears in the spreadsheet itself, even though it updates to the appropriate vessel on the canvas.   This makes me think that no additional calculations can be done in the spreadsheet based on the web service connection data.
Can anyone tell me if that is correct? If so, then the web service connection would also have to pull in the TOTAL#OFCALLS along with the other data.   This would also seem to greatly limit what you could do with data generated by a web service connection, so I am hoping I am wrong and just don't understand how to do this.
Can anyone clarify this for me? If I failed to give any pertinent info let me know what it is, and I will update my post.
Thanks!

I have seen similar behavior as well. I have live data coming into Xcelsius from a data connection.
A supported Excel formula
=IF(ISBLANK(J2),I2,VALUE(TODAY()-J2))
is then applied to one of the columns to create an additional derived column.
Taking a snapshot of the data shows that the derived column is being populated, however the controls I've tried hooking up to the derived column (charts and labels) are always empty.
Information on whether this is supported would be appreciated.
Thank you,
David

What is the transaction code for see the Web Services available in SAP

Hi
I came to know that SAP has provided its own webservices... I need some information on that... If any one has documentation on that can u please send it to me... My ID is <b>[email protected]</b>.
What is the trasaction code for see the web services available in SAP.... Can any one help.. Please its urgent
Best Regards
Ravi Shankar B
Message was edited by:
RaviShankar B

Hi,
you can find Web Services (Enterprise Services) in the Enterprise Services Workplace (ES Workplace). The ES Workplace allows you to explore, test, and use enterprise services to make enterprise SOA tangible. Here, you will find all of the currently productized enterprise services by SAP.
Best Regards,
Boris Mueller
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/esa/esapreview">ES Workplace at SDN</a>
<a href="http://esapreview.sap.com:82/socoview(bD1kZSZjPTgwMCZkPW1pbg==)/flddisplay.asp">ES Workplace</a>

Look for JDeveoper 10g Web Services Samples

We would like to use JDeveloper 10g to create Web Services and create JSP pages to use them.
If you know a good starting point or where I can find examples, please let me know. I have found some for 9i, but I hope 10g will make the job easier.
Thanks a lot.

My original message was referring to Mike's following response.
The problem is, in the oc4j10.0.3 generated stub, there is no
m_httpConnection = new OracleSOAPHTTPConnection();
so how do you set up the proxy properties to the connection?
Quote
It may be that you require a proxy server, optionally with proxy authentication to access the Internet from within your intranet. If you are using a proxy server as I am guessing here, look inside your stub for the line that reads:
m_httpConnection = new OracleSOAPHTTPConnection();
then after it add these lines:
Properties props = new Properties();
props.put(OracleSOAPHTTPConnection.PROXY_AUTH_TYPE, "basic");
props.put(OracleSOAPHTTPConnection.PROXY_USERNAME, "proxy_username");
props.put(OracleSOAPHTTPConnection.PROXY_PASSWORD, "proxy_password");
props.put(OracleSOAPHTTPConnection.PROXY_HOST, "proxy-host");
props.put(OracleSOAPHTTPConnection.PROXY_PORT, "80");
m_httpConnection.setProperties(props);
where "proxy_host" is your proxy serve, "80" is your proxy server port and if your proxy requires a username/password, update the lines above where username and password are defined; otherwise delete those lines.
Mike.
unquote

Can use PLSQL to develop PLSQL web services?

Hi,
I know we can use JDeveloper to create PLSQL web services.
How about if we want to develop plsql web services using PLSQL itself, is that possible?
Please advise.
Thank you.

I found the article on how to call web services from within database.
http://www.oracle.com/technology/tech/webservices/htdocs/samples/dbwebservice/DBWebServices_PLSQL.html?_template=/ocom/technology/content/print
The example is for oracle9iR2.
It's looks like it's quite a bit of work compare to use java to call web services. I wonder with Oracle10g database, is there any improvement that will simply the steps? Would appreciate some advice as i don't have oracle10g environment in my place.
Thank you.

Java API for Primavera p6 Web services

Hi All,
- Anyone can please suggest me how to create the Java API for primavera p6 web services ?.
-if is this inbuild then from where we can download please suggest me or give me some link ?.
Thanks & Regards
Dharmendra

You can review P6 Professional Project Management 7.0 Documentation Library for documentation on API and how to use it.
API are available and can be downloaded from edelivery.oracle.com.

Create a Secure Client for a Secure Web Service- is failing

Hi,
This is actually with reference to the webservice tutorial.I am trying the example on Create a Secure Client for a Secure Web Service and have followed all the steps mentioned,however I am getting the following error:
D:\JDev11gTp\jdk\bin\javaw.exe -client -classpath D:\Jdev11gTpInstance\mywork\WebServiceApplications\.adf;D:\Jdev11gTpInstance\mywork\WebServiceApplications\WebServiceProjects\classes;D:\JDev11gTp\webservices\lib\jaxws-api.jar;D:\JDev11gTp\webservices\lib\jws-api.jar;D:\JDev11gTp\webservices\lib\orawsmetadata.jar;D:\JDev11gTp\webservices\lib\wsclient.jar;D:\JDev11gTp\j2ee\home\lib\activation.jar;D:\JDev11gTp\j2ee\home\lib\ejb.jar;D:\JDev11gTp\j2ee\home\lib\jms.jar;D:\JDev11gTp\j2ee\home\lib\jta.jar;D:\JDev11gTp\j2ee\home\lib\mail.jar;D:\JDev11gTp\j2ee\home\lib\servlet.jar;D:\JDev11gTp\webservices\lib\jaxrpc-api.jar;D:\JDev11gTp\webservices\lib\wsserver.jar;D:\JDev11gTp\webservices\lib\wssecurity.jar;D:\JDev11gTp\webservices\lib\wsdl.jar;D:\JDev11gTp\webservices\lib\orasaaj.jar;D:\JDev11gTp\webservices\lib\saaj-api.jar;D:\JDev11gTp\webservices\lib\orawsdl.jar;D:\JDev11gTp\webservices\lib\orawsrm.jar;D:\JDev11gTp\webservices\lib\orawsrel.jar;D:\JDev11gTp\webservices\lib\jaxr-api.jar;D:\JDev11gTp\webservices\lib\orajaxr.jar;D:\JDev11gTp\webservices\lib\relaxngDatatype.jar;D:\JDev11gTp\webservices\lib\xsdlib.jar;D:\JDev11gTp\webservices\lib\mdds.jar;D:\JDev11gTp\webservices\lib\wsif.jar;D:\JDev11gTp\webservices\lib\fabric-common.jar;D:\JDev11gTp\webservices\lib\fabric-interceptors.jar;D:\JDev11gTp\jlib\jaxen.jar;D:\JDev11gTp\jlib\oraclepki.jar;D:\JDev11gTp\jlib\ojpse.jar;D:\JDev11gTp\jlib\jsr106.jar;D:\JDev11gTp\jlib\jsr105.jar;D:\JDev11gTp\jlib\osdt_xmlsec_jce.jar;D:\JDev11gTp\jlib\osdt_wss_jce.jar;D:\JDev11gTp\jlib\osdt_saml_jce.jar;D:\JDev11gTp\jlib\osdt_saml2_jce.jar;D:\JDev11gTp\jlib\osdt_core.jar;D:\JDev11gTp\jlib\osdt_cert.jar;D:\JDev11gTp\jlib\osdt_xmlsec.jar;D:\JDev11gTp\jlib\osdt_wss.jar;D:\JDev11gTp\jlib\osdt_saml.jar;D:\JDev11gTp\jlib\osdt_saml2.jar;D:\JDev11gTp\jlib\ojmisc.jar;D:\JDev11gTp\j2ee\home\lib\http_client.jar;D:\JDev11gTp\j2ee\home\jazncore.jar;D:\JDev11gTp\j2ee\home\oc4jclient.jar;D:\JDev11gTp\rdbms\jlib\xdb.jar;D:\JDev11gTp\j2ee\home\lib\javax77.jar;D:\JDev11gTp\lib\java\api\jsr173_api.jar;D:\JDev11gTp\lib\java\shared\sun.jaxb\2.0\jaxb-impl.jar;D:\JDev11gTp\lib\java\shared\sun.jaxb\2.0\jaxb-xjc.jar;D:\JDev11gTp\lib\java\shared\sun.jaxb\2.0\jaxb1-impl.jar;D:\JDev11gTp\j2ee\home\lib\oc4j-schemas.jar;D:\JDev11gTp\jlib\ojdl.jar;D:\JDev11gTp\jlib\ojdl2.jar;D:\JDev11gTp\jlib\fmw_audit.jar;D:\JDev11gTp\j2ee\home\lib\jmxri.jar;D:\JDev11gTp\j2ee\home\lib\jmx_remote_api.jar;D:\JDev11gTp\j2ee\home\lib\adminclient.jar;D:\JDev11gTp\j2ee\home\lib\jmxframework.jar;D:\JDev11gTp\j2ee\home\lib\jmxspi.jar;D:\JDev11gTp\j2ee\home\lib\xmlcfg.jar;D:\JDev11gTp\jlib\dms.jar;D:\JDev11gTp\jlib\orai18n.jar;D:\JDev11gTp\j2ee\home\lib\commons-digester.jar;D:\JDev11gTp\j2ee\home\lib\spring.jar;D:\JDev11gTp\lib\java\shared\oracle.wsm\11.1.1.0\wsm-policy-core.jar;D:\JDev11gTp\lib\java\shared\oracle.wsm\11.1.1.0\wsm-pmclient.jar;D:\JDev11gTp\lib\java\shared\oracle.wsm\11.1.1.0\wsm-pap.jar;D:\JDev11gTp\lib\java\shared\oracle.wsm\11.1.1.0\wsm-agent.jar;D:\JDev11gTp\lib\java\shared\oracle.wsm\11.1.1.0\wsm-secpol.jar;D:\JDev11gTp\lib\java\shared\oracle.javatools\11.1.1.0.0\javamodel-rt.jar;D:\JDev11gTp\lib\java\shared\oracle.javatools\11.1.1.0.0\javatools-nodeps.jar;D:\JDev11gTp\lib\java\shared\oracle.toplink\11.1.1.0.0\toplink-sdo.jar;D:\JDev11gTp\lib\java\api\jaxb-api.jar;D:\JDev11gTp\lib\xmlparserv2.jar;D:\JDev11gTp\lib\xml.jar;D:\JDev11gTp\jakarta-taglibs\commons-logging-1.0.3\commons-logging.jar -Dhttp.proxyHost=localhost -Dhttp.proxyPort=8099 -Dhttp.nonProxyHosts= -Dhttps.proxyHost=localhost -Dhttps.proxyPort=8099 -Dhttps.nonProxyHosts= HelloPolicyPortClient
Feb 1, 2008 5:13:43 PM oracle.j2ee.ws.common.context.ContextInterceptor init
INFO: Context provider properties file not found
Feb 1, 2008 5:13:44 PM oracle.wsm.audit.Auditor <init>
INFO: Created J2SE auditor for componentType=OWSM-AGENT busstop=D:\oracle\product\10.2.0\client_1\auditlogs\OWSM-AGENT filter=false auditor=oracle.security.audit.Auditor@143a083
Feb 1, 2008 5:13:44 PM oracle.wsm.audit.Auditor <init>
INFO: Created J2SE auditor for componentType=OWSM-PM-LIB busstop=D:\oracle\product\10.2.0\client_1\auditlogs\OWSM-PM-LIB filter=false auditor=oracle.security.audit.Auditor@15af049
SEVERE: WSM-04514 An MDS error occurred.
SEVERE: WSM-09012 No key, WSM-06002, was found in the resource bundle oracle.wsm.resources.policyvalidation.PolicyValidationMessageBundle.
javax.xml.ws.WebServiceException: oracle.fabric.common.PolicyEnforcementException: PolicySet Invalid: WSM-06002 PolicyReference Invalid policy reference
at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:466)
at oracle.j2ee.ws.client.jaxws.WsClientProxyInvocationHandler.invoke(WsClientProxyInvocationHandler.java:204)
at $Proxy28.sayHello(Unknown Source)
at HelloPolicyPortClient.main(HelloPolicyPortClient.java:35)
Caused by: oracle.fabric.common.PolicyEnforcementException: PolicySet Invalid: WSM-06002 PolicyReference Invalid policy reference
at oracle.integration.platform.common.InterceptorChainImpl.createPolicyEnforcementException(InterceptorChainImpl.java:217)
at oracle.integration.platform.common.InterceptorChainImpl.processRequest(InterceptorChainImpl.java:104)
at oracle.j2ee.ws.client.mgmt.runtime.SuperClientInterceptorPipeline.handleRequest(SuperClientInterceptorPipeline.java:91)
at oracle.j2ee.ws.client.jaxws.DispatchImpl.handleRequest(DispatchImpl.java:309)
at oracle.j2ee.ws.client.jaxws.DispatchImpl.handleRequest(DispatchImpl.java:290)
at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:444)
... 3 more
Process exited with exit code 0.
Can anyone please give any clue as to why this error is coming?
Thanks.

Hi
Please refer to this thread
Re: Can I create a login/password protection in Muse for a HTML5 page or two?

Security exception while running the java client for a secured web service.

hi,
I created a proxy for a secured web service.
When I run the client java program I am getting the following exception :
java.io.IOException: could not load the default-keystore.jks file because The keystore file is tampered or password is incorrect.
Its saying that password is invalid.
Can you please help me on this thanks in advance.
Regards,
Chandra

hi,
I created a proxy for a secured web service.
When I run the client java program I am getting the following exception :
java.io.IOException: could not load the default-keystore.jks file because The keystore file is tampered or password is incorrect.
Its saying that password is invalid.
Can you please help me on this thanks in advance.
Regards,
Chandra

Use case for describing a web service

Similar Messages

Maybe you are looking for