Use different BAPI's in same scenario

Hey guys
i was just wondering whether it is possible to use two different BAPI's in the same scenario.
like suppose i m doing a File to RFC scenario,then can i use two different RFC's on the receiver side(i m not asking about branching the messages using receiver determination)
thanx
ahmad

Ahmad ,
the BPM will look as follows,
1. Receive Step --> Opens Synch Asynch Bridge and receives the Synch Request.
2. 2 separate Transformation steps --> to map the Request Message to the 2 Different BAPI's request mesaages.
3. Fork --> with 2 branches and 2 send synchronous steps to send the BAPI request and get the responses.
4. Transformation --> 2:1 transfromation, where you combine the BAPI response into the single response message as expected by the initiator.
5. Send --> Closes Synch Asynch Bridge and sends response back.
Regards
Bhavesh

Similar Messages

APs using different channels for the same SSID

Hi,
This might be a stupid question, but I am wondering why my Aironet 1602i and 2602i access points connected to the same controller would use different channels for the same network. Would this be to avoid interference? If so, I am planning to put 9 access points throughout the office and they will be fairly close to each other. Would this increase the risk of interference?
Thanks,
Tibet

That is normal. The WLC is determining the best channel and being in different channels is the best. When you add more, the WLC will decide by the use if RRM what channels and power levels to allocate to each AP.
Sent from Cisco Technical Support iPhone App

[svn] 4290: Bug: BLZ-288 - Consumer is only receiving first pushed message when Consumer and RemoteObject that is used to push the messages use different channel sets but same channel .

Revision: 4290
Author: [email protected]
Date: 2008-12-11 14:24:37 -0800 (Thu, 11 Dec 2008)
Log Message:
Bug: BLZ-288 - Consumer is only receiving first pushed message when Consumer and RemoteObject that is used to push the messages use different channel sets but same channel.
QA: Yes
Doc: No
Checkintests Pass: Yes
Details:
* The bug app was arguably generating bogus test data (messages with duplicate ids), and 99.9% of applications won't be configured this way (using multiple ChannelSets with overlapping Channels, pointing at the same server) but it's still worth making this work just right anyways.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-288
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ConsumerMessageDispatcher.as

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

How can I use different presets on the same instrument?

I use Session Horns Pro with Kontakt Played in Mainstage 3.
You can choose different presets within Session Horns without having to load additional samples and take up more memory.
How can I create different patches that use the changes of Session Horn Patches without duplicating the samples in Kontakt?
If I copy the channel strip and 'Paste as alias" changes made to one copy are the same as the alias. It seems there must be a way to "Automate" controls in an alias that is unique to each patch. I could also use to do this on instruments like Vintage Clav and Vintage B3 where I don't want to create duplicate instances of CPU hungry plug ins just to use different presets in different patches.
Thanks in advance to anyone out there who knows of a workaround!
Larry Ketchell

Yes. You can sync apps/music/etc to as many of your iphones/ipads/ipods as you like.
Here is how to use the iphone without a wireless plan:
Using an iPhone without a wireless service plan

Using different levels of the same dimension

If I have 2 fact tables and a conforming time dimension. Can I make a join so that one table will ignore different years completely? (1 table has only 1 year of data, so it should display same values for different years for other table -yet, I still want to be able to drill-down from Year-to-Detail). I am somewhat successful at seeing it ok on a Annual level (when setting the desired metric to Grand Total Level - but aggregate navigation doesn't work correctly -I'm locked at annual level). Thanks

HI mma (and anyone else who was following).
Here's an update:
a) AGO function doesn't support anything non-integer - it's official and the product enhancement request has been filled. Go figure - they cancel time-series wizard - but at the same time - the AGO isn't fully scalable. Since we're developing a brand-new RPD - and we weren't using any YAGO, MAGO, etc. tables - this has bitten us later than sooner.
b) using CASE statement is no panacea (change for each year).
c) your method (time.key=time.key (of 2005) + MOD (time,key, 365) would probably work in my situation (I tried it - and it wasn't that difficult to implement), UNLESS I'd get the following RPD integrity error - "Error: Using a complex join in table that sources time dimension" (I tried aliases as well).
d) Right now, I'm just doing that metric on Annual level. Creating a view in Oracle that only contains needed data (for 2006) , using it as a physical table in physical layer, and connecting with all foreign keys BUT time.
I still think there must be a better way without complex ETL and without creating additional column. LOJ and ROJ and FOJ didn't work.
Thanks for looking at this again.

Two SharePoint server Farms using different configuration databases with same content DB's

Hi everyone,
I am having strange problem while cloning the environments for SharePoint 2007 farm. We cloned the WFE and DB servers with different names. When the configuration wizard has run pointing to the new DB server for complete the new FARM, The config is pointed
to the new Database server but the content databases remains same as old. This makes the production and cloned sites pointed to the same content.
How can this be possible to have a SharePoint farms with separate config DB's and same content DB's. Please advise and now the search service in the production is also broken.
Thanks keshav,Share point Developer

Hi,
This is one reason why you should always use SQL Aliases when configuring SharePoint
Stop the SharePoint Services, you can use Server Manager on the WFE
From the command line
Enter CLICONFG
Highlight TCPIP, Click Enable
Click on the Alias Tab, and Click Add
Click the TCPIP Radio Button
Enter the (Old Database Server Name) in the Server Alias Box
Enter the (Cloned Database Server Name) Server Name in the Server Name Box
Uncheck, Dynamically Assign
Enter Port 1433, and Click OK. Make sure on your new SQL Server that you don't have an inbound rule blocking Port 1433.
On the new Cloned Server WFE start the SharePoint Services
Run IISReset
On The WFE and the App Server. Start the SharePoint Services, you can use Server Manager
I would normally test this by stopping the SQL Service on the Old Server and login to SharePoint on the Cloned Server...
Cheers,
-Ivan

Using different OS (Unix) in same SAP Landscape

Hi,
Bcause of some business reason, we need to use AIX for Developement system and Sun Solaris for QA and Prod environment. I know technically it is possible, except some problems related to SAP kernel and SAP notes for OS level fix.
Does anybody has this type of scenario? What are the challenges we should consider in this?
Your help is much appreciated.
Thanks,
Krishna

Hi Ganimede,
We have already highlighted this point to the management and working on making exceptions in our change management process to make OS related changes as an exceptions.
As I mentioned before, this is technically possible.
But you said " it will not be supported by SAP". Do you have any oss note or document to support this statement? To make statement to management, I need supporting document.
I am also opening OSS message to see .. what SAP has to say.
Thanks for your reply.
Regards,
Krishna

Can I Use Different Programs at the Same Time

Hi All,
I understand that the Creative Cloud can be installed on two computers but the same programe cant be running on both at the same time. I use my MacBook and iMac in unison so my question is could one computer be running Illusstrator and the other running Photoshop without any issues at the same time?
Thanks
Sam

Hi Sam
The Creative Cloud apps can be installed on 2 computers and used at the same time by the individual associated with the membership.
Thanks
Bev

Is it possible to export 2 PDFs (using different settings) at the same time from InDesign?

As above. The purpose being to end up with one high res (print) pdf, and one low res (online) pdf.

Cheers pal.
I'm currently using a 'batch process' in Acrobat Pro on all my Print PDFs (to convert to online PDFs). Guess I'll stick with that then.
Was hoping there would be something magic I could do when making the original PDFs from InDesign.

Two iPhone same AppleiD moving to iCloud using different account. What happens to the app ?

Here is the scenario.
Me and my wife have two different iphone with the same AppleiD. She has her own mail, her music playlist, her photoalbum and of course we share some of the apps bought with my AppleiD.
Now that we are moving to iCloud I was wondering if she can keep the apps or she has to buy them again.
Roberto

you can use the same apple id with DIFFERENT EMAILS for find my friends. That said, i just set my wife up with a brand new apple id that *is* her email address to make it easy for friends to find HER.
Then i erased my primary email from my iTunes purchase apple id and ADDED it to my @me.com apple id so i ca have MY normal email address work with find my friends.
now i can have my NON email apple-id work for iTunes purchases and i don't have to ADD yet one MORE apple id (i'm already at the MAX of FIVE allowed to sync to an iDevice!)
so my email address: [email protected] is attached to my [email protected] apple id, and friends can request and it works great. I use the [email protected] for signing on on *MY* phone *and* my wife's phone for iCloud (so our calendars and contacts are shared) then my WIFE is signed into find my friends with [email protected]
I've had a non-email apple id since apple id existed. i've changed my email about half a dozen times since that time, and even so, accidentally purchased a few things with OTHER apple id's (that are now defunct emails); very moronic to use a non-apple-controlled email address as a user id! yeesh that was dumb.

How to set Different applications running on the same computer to use different Gateways?

Dear All,
I would like to have different applications running on the same computer to use different Gateways (both gateways are in the same subnet).
Is it possible in Windows7 with / without a third-party utility?
Current scenario & requirements:
I have two internet connections. Both are in the same subnet (192.168.1.0/24) and connected to the same LAN switch
Gateway for the first connection is 192.168.1.1
Gateway for the second connection is 192.168.1.2
I need to set my chrome browser & google talk to use the gateway 192.168.1.1
I need to set my IE & skype to use the gateway 192.168.1.2
Is it possible? Answers are appreciated!!
Regards,
Anees

Hi,
I agree with Bill. Gateway is essentially an IP address for one network to other networks. For example, you have two networks: network A and network B, to make the two networks communicate with each other, you must go through Gateway. That is, as long
as you set Gateway, then you can make the two networks communicate with each other. The ip address for Gateway is the ip of device with routing enabled. One host machine can own multiple gateways.
Andy Altmann
TechNet Community Support

Accessing the same database file using different handles/cursors

Will there be any problems accessing the same database file using different DB handles in a transactional environment? We have implemented a process which have multiple transient threads coming up and initiating DB opens and read/write operations to the same database file using different handles and cursors?
Can this potentially create any problems/bottlenecks? Can someone suggest the best way to deal with this scenario?
Thanks in advance.
SB

Hi,
Berkeley DB is well suited to the scenario you describe. You need to ensure that Berkeley DB is configured correctly for transactional access, the best information describing the requirements is in the Reference guide here:
http://download.oracle.com/docs/cd/E17076_02/html/programmer_reference/transapp.html
If there will be multiple threads operating concurrently, then you will need to design your application to detect and deal with deadlock situations.
Regards,
Alex Gorrod
Oracle Berkeley DB

Controller different Input in the same time in a real Scenario...(SIMULATION IN 2 TANKS CONTROLLER BY PCB BOARD)

Hi! I really need help....
I´m doing a simulation where I can controller the input and output with one external PCB, all is working properly (the communication) but my problem is, I can´t open where ever I want the different valves...I mean, I must wait until the process is finish...
The program is working with diferents process like this:
§Process 0:
Programinitialization. Tanks and pipes in zero state. Control for this state with “pump on” button.
§Process 1:
§State:
“ Pump on ” button istrue: Pump 1 isrunning, andTank 1 starts to be filled with water.
“ Pump on ” button is false: nothing happen, go to the next process
§Process 2:
This process is controlled from the “Control 1”button with is who control “Valve 1” for the discharge of water from tank 1 to tank 2.
§Process 3:
This processiscontrolledfromthe “Control 2 ”button with is who control “Valve 2” for the discharge of water from tank 1 to tank 2 if “Control 3 ” button is close or if “Control 3 ”button is open the water go out from the loop.
§Process 4:
This processgiveyoutheoptiontocome back totheprocess 1 ortotheprocess 2 dependingofthestate in process 3.
So my problem is I want run different processes in the same time, without having to wait out the current process is running....
this look like this:
and with the differents states...so I was trying to use a Statechart for try to improve the simulation....
like this:
But when I was tried to implement in labview with the statechart module i can't find the way to interconexión with this new module...
Because i need two differents regions...but i can't use the connexion between them....
Some new idea, help....all is welcome!!!
Thanks in advance.
Elena

Buenos días Alvaro,
Si, mejor en español
Si, me has entendido bien, exactamente es lo que me gustaria.
Empece por mi cuenta con labview y hay muchas cosas que se me escapan... Voy a implementar la máquina de estados a ver si asi soluciono el problema.
Muchas gracias!
Un saludo!

Can two peeps use iChat with different accounts on the same computer?

What do I do to REMOVE an old AIM account and replace it with a new account in IChat?
Can two peeps use iChat with different accounts in the same computer?
(Actually, two people share a laptop, but one of us cannot use her AIM account cuz mine is in iChat already... And, when traveling, I have the computer - and I would like to use iChat on the computer...)

In iChat 4 you can have more than one AIM Valid name logged in at once.
AIM valid = AIM, @mac.com or a MobileMe name.
What you are then stuck with is that iChat is linked to one Buddy Picture and The one Mac User Account's Address Book which may or may not have Full Names, emails details, or a Nickname in iChat 4 linked to the Screen Names.
Whilst it does let you both log in whilst using one Mac User Account there are drawbacks about who uses the keyboard and reading meesages from the other persons Buddies.
8:50 PM Sunday; November 30, 2008

We have 3 devices used by 3 different people under the same Apple ID, how do I stop getting my daughters texts, both sent and received?

We have 3 devices used by 3 different people under the same Apple ID, how do I stop receiving my daughters texts? Both sent and received.

When you use the same Apple ID on 3 devices it means you are all using the same (email, imessaging, calendar etc). Since iCloud (MobileMe) is designed to be shared across all devices included Macs, it means all devices setup with the same ID will have access to the information.
Text messaging is relevant only to the number you are texting. This is done through your telecom companys lines and not on Apples.
If you do not want to have others be able to read any of your information then it is best you each have your own account.

Use different BAPI's in same scenario

Similar Messages

Maybe you are looking for