Use DW8 and DW-CS3 on same machine

I have DW8, and bought CS3 upgrade (actually, Studio 8 to CS3
Web Standard).
I need to be able to keep DW8 as is, with all extensions.
Will installation of the CS3 upgrade screw up my current Studio 8
installation/configuration?

Tom:
If I use your first method listed, will I then be able to
install the
updated version of the extension?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Tom Muck" <[email protected]> wrote in
message
news:f08mvv$75o$[email protected]..
> You can run them side by side, but you cannot run
different extensions on
> both. There is only one Extension Manager cache, and it
contains info
> about one set of extensions.
>
> I wrote an article that details some problems with the
Extension Manager:
>
http://www.tom-muck.com/articles/ProperCareAndFeedingOfTheExtensionManager/
>
>
> --
> --
> Tom Muck
> co-author Dreamweaver MX 2004: The Complete Reference
>
http://www.tom-muck.com/
>
> Cartweaver Development Team
>
http://www.cartweaver.com
>
> Extending Knowledge Daily
>
http://www.communitymx.com/
>
>
> "timrand" <[email protected]> wrote in
message
> news:f06uet$qc9$[email protected]..
>>I have DW8, and bought CS3 upgrade (actually, Studio
8 to CS3 Web
>>Standard).
>>
>> I need to be able to keep DW8 as is, with all
extensions. Will
>> installation
>> of the CS3 upgrade screw up my current Studio 8
>> installation/configuration?
>>
>>
>>
>
>

Similar Messages

Using router and USB wireless on same machine but can't browse

Hello, everybody.
I have a WRT54G connected to my desktop to enable a laptop to exchange files with me.
Also have a WUSB54G on the same machine to connect to a local hotspot.
Problem is I lose the ability to browse the net when the router is connected.
Does anyone know how to configure this setup so the web browser (IE6) will look for the internet through the USB adaptor instead of trying to go through the router?

Are you able to go online, when your computer is connected directly to the router?? also your laptop is able to go online?? If computer is running on Win XP…. you need to completely uninstall wireless adapter from computer click on start >> programs >> wireless G USB adapter >> uninstall, insert the CD for adapter and restart the computer, one window would pops up found new hardware, install only the drivers no need to install software or utility and use WZC to manage wireless connections…check whether it works or not.

CS3 Bridge and CS4 on the same machine.

Hello Everyone,
I have adobe photoshop CS3 and Illustrator CS4 on my machine. Any known issues for running bridge CS3 and CS4 on the same machine? Some experts at telling me not to use Photoshop CS3 with Bridge CS4, just wondering. Thanks for you replies.

Bridge is not really a stand alone product, and tuned to work with its current version of PS. Also, Bridge CS4 has some features changed and/or added. So if using CS3 Bridge you might have aspects that don't work with PS CS4.
I would keep CS3 on the machine if you don't need the HD space, until you feel you no longer need the older version. But use them as a pair as intended. Also, only have one Bridge running at a time.
I did not upgrade to CS4, but from what I have read I see no reason to use Bridge CS3 as the upgrade is faster, less prone to crashes, and has added features.
CS4 PS on the other hand can be tricky if you don't have a newer computer with a good video card.

Designer 6i and 10g on the same machine?

I have Designer 6i and corresponding repository on my machine.
The problem with 6i I can't save diagramm in HTML format
I believe I can save in HTML format in 10g or other?
Can I install on the same machine 10g designer?
should I configure new repository?
TIA

See my update on your earlier question.
As for running 6i and 10g on the same machine, yes you can do it. You just have to install them in separate Oracle Homes, and be careful when you tell them which version of EXP and IMP to use. There is one MAJOR caveat, however. They cannot use the same Designer Repository - 6i client won't talk to a 10g repository and 10g client won't talk to a 6i repository. You can upgrade a 6i repository to 10g with the RAU, but take a backup before you do - the only way to go back is to restore your backup. Besides, I think that if you upgrade to the last supported version of Designer 6i (you should be able to get it from MetaLink) you will get the Publish Diagrams utility.
Frankly, my opinion is that there is only one reason to stay on 6i - if you need to generate and support 6i client/server Oracle Forms. If you don't use Oracle Forms, or if you have moved on to Web Forms with the middle tier Forms Server, I'd recommend an upgrade to Designer 10g and Developer 10g.

Replace a 2003 (not R2) File Server with a 2012R2 files server and preferably keep the same machine name and IP when finished

I am wanting to replace a 2003 (not R2) File Server with a 2012R2 file server and preferably keep the same machine name and IP when finished. For the moment I just need some "high level" guidance, little details can be worked out once I know
which direction I will go. I was considering that DFS might be a way to help get through the process although when finished the 2012R2 Files server will be by itself with no other file server planned at this time. DFS can stay installed for maybe
future purposes but clearly I wouldn't need the DFS Replication with only one machine.
Here's a few details of the environment....
1. DC's are 2012R2 but it is still 2003 DFL because the old 2003 DCs are still present. But likely they will be gone and the DFL elevated before I start on the File Server project
2. Nearly all machines in the facility have a shortcut on the "All Users" Desktop that points to the existing old File Server. Editing or replacing that shortcut would be a major pain,...hence why I want to keep the same machine name at least,
and maybe the same IP if not too much trouble. This way the existing shortcut would continue to work with the new 2012R2 File Server. The UNC path represented in that shortcut is also configured into one or more of our major business applications,
futher emphasizing the need to keep the UNC path the same throughout the process.
3. The facility runs 24/7/365 but is "light" on weekends. The political environment is such that there is little to no tolerance for any down time at all.
4. Would DFS (based from the 2012R2 machine) be a good tool to get where I need to go?
Thanks for any suggestions.
Phillip Windell

Hi Sharon,
I've done some more reading and have a few new ideas to run past you....
Yes regular DFS wouldn't help and the Namespace would still be different than how it was with just the old server. However I was thinking DFS Replication could replace the purpose of RoboCopy and it would keep the two locations "in sync" until I was ready
to flip over to the new server. DFS Rep can exist independently of a DFS Namespace, so a Namespace is not even needed. It needs a minimum of 2003R2 for the "later & better" DFS Rep but I believe 2003 can do an "in place" upgrade to 2003R2, so I would upgrade
the old server to 2003R2 first. As long as the DFS Rep on 2012R2 and 2003R2 will properly interact I think that will work.
Thanks for the reg info on the Shares. I'm debating if editing that would reg file would really be much better than manually creating the Shares on the new server while the DFS Replication was doing its job. I'll probably export that Key as a
safety move whether I use it or not.
Once the DFS Rep is fully in sync and the Shares are in place on the new server, I figure I would then:
1. Remove the DFS Replication Object (optionally remove DFS Services completely)
2. Rename the old File Server to something else and set it to DHCP
3. Rename the new File Server to the name I want to use and give it the IP the old server had.
How does that sound?
Phillip Windell

I want to run IIS and Form Server on same machine

Dear follows
I have problems , porblems is that i want to run IIS and Form
Server at same machine but i m facing some problems so please
inform me right proceduers to run this services at same machnine
now i m using Windows NT .
My secone problems is that i want to send emai via oracle
reports , actuall condition is that i have oracle report and i
want to add button and behind this boutton i want to add trigger
to send this report as a emai to client as txt/html format.

There shouldn't be any problem running both forms server and IIS
on the same machine. Just make sure the ports that are used are
different. IIS's default port is 80, so either change this port
number or change it for the Forms server's web listener.
You can send reports to email if you use DESTYPE=MAIL.

How to instal FMS and Wowza Server on same machine.

I want to to instal FMS and Wowza Server on same machine any one know about this please guide me about this.
Thanx in advance.

I have on one server installed both red5,fms and wowza
first install red5 ( by default it uses port 1935 obviously )
then let say wowza , with installation choose port 1936 ( make sure you open this port )- you app will run on rtmp://your-ip/domain.com:1936
then fms - choose port 1937 ( here again make sure you open this port too ) - rtmp://your-ip/domain.com:1937

Is it possible to run VLM and lmtools on the same machine

hi together ... is it possible to run VLM and lmtools on the same machine without any problems?
the running system will be Windows Server 2008 R2 x64! maybe we will install the license server on the virtual server.

Hi SvenNittmann,
in general, it should be possible to run both tools (VLM and lmtools for FlexNet) on the same machine. But I wouldn't recommend you this way, because NI VLM is also build on top of FlexNet and sometimes you will receive ugly problems with the installation of both tools on the same PC. It is possible to use VLM in a virtual machine without any problems or restrictions. NI provides information about the usage of VLM in a virtual machine, like you can see here:
Volume License Manager on a Virtual Machine - National Instruments
http://digital.ni.com/public.nsf/allkb/5730FDDC97F9157E8625755F00749CFF?OpenDocument
I also use VLM in a virtual machine and I could recommend you the same solution.
Regards, Stephan

CAN I INSTALL BOTH (ORACLE 9IAS AND ORACLE DATABASE )INTO SAME MACHINE.

oracle 9ias and oracle 9i database in same machine Feb 25, 2003 11:22 PM
Reply
Dear Friends,
I installed oracle 9ias. and then i hosted my form,report into that server . All was working properly.
at this time my database was into another machine.
then i installed oracle 9i database into the same machine
(as the oracle 9ias was installed)
at the instalation of oracle 9i database one error comes
and shows that Agent configuration Assistant Installation
fail.
but After installation of database it work properly.
there is no problem.
but when I try to run from through web(by using oracle 9ias)
it gives Internal error(500).
i check and find that my appache server for 9ias is working properly and in services of windows 2000 no error comes.
HOW CAN I INSTALL BOTH (ORACLE 9IAS AND ORACLE DATABASE )INTO SAME MACHINE.
With regards
Siddharth Singh
[email protected]

Hi James,
Have u ever tried ORACLE 9iAS R2 on Redhat Linux ?
If yes what is the version of RH Linux you were using ?
Any docs for that ?
[email protected]
Regards
Amudharasu

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013

What is the best way to have access to OSX and OS9 from the same machine?

What is the best way to have access to OSX and OS9 from the same machine?
Do I need to partition the hard drive? Installed both Tiger and OS 9 on the G5 and it is having problems starting up properly.
G5 Mac OS X (10.4)

And here is the prove for Edwin's message: Macintosh: Some Computers Only Start Up in Mac OS X

I cannot use data and voice at the same time.

I cannot use data and voice at the same time.
I am on Wifi (connected) and at the same time I am on a voice call. when I switch to my RSS feed reader it does not sync it comes out with a message cannot connect to internet, I thought it is a problem with the feed reader application, IE 10 behaves the same I cannot browse when I am on a voice call.
This is a very basic issue, am I missing something? Please help.
My Model is lumia 820 with the latest portico update.
TIA
Sandeep

I am aware that packet data via EDGE and voice cannot happen at the same time, surprisingly when I am on voice call I cannot connect to internet via Wifi too

Can we use exceptions and conditions at the same time?

can we use exceptions and conditions at the same time? Are there any dependencies between exceptions an conditions?

Exceptions are used when there are some mistakes , or exceeds the supposed values, we can highligt that in different colours for enabling the validator to notice easily. In this we are giving conditions for considering the value as exceptions. suppose, if the values is out of the range -1 to +1 then exception.
But conditions can be considered as the restrictions given in measure level also. So please elaborate what you meant by conditions

Use AO and AI in the same program

Hello,
I like write a program to use AO and AI in the same program.
In this program write a timer a voltage to a AO port and after then it should read a voltage.
I know how I write voltage to a AO port and read a voltage on a AI port, but not in a the same program.
The read- and the write-Task, should work as soon as possible (<=1ms).
(My timer have 100us ticks)
what should I inilize for the PCI6229 card, to use AO and AI and in which order?
Can I have a example or pseudocode?
Best regards
Heiko Mayer

Hi Heiko-
There is very little overlap between the AO and AI examples, so you should be able to piece the code together pretty easily. I would offer these suggestions:
1. These lines should only be executed once, and they should be done before any AI or AO specific initialization is done:
configureTimebase (board);
pllReset (board);
analogTriggerReset (board); 2. It does not matter which order you perform the AI or AO initialization, but I would recommend waiting to unground the AO reference (by board->AO_Calibration.writeAO_RefGround (kFalse) until all of the AI and AO init is done. This will help to avoid any glitching on the AO lines. The only steps that should be saved until after ungrounding the reference are the Start operations for AI and AO (depending on the AO mode you use, there may not be a specific Start operation to call. Consult the MHDDK examples for more info about the required steps).
Hopefully this helps-
Tom W
National Instruments

Infrastructure and forms server into same machine

Dear friends,
I am faching strange problem
, I install 9ias(9.0.2.0.1) infrastucture and form server into same machine,
after sucessfull installation it is mention infrastucture will run the port 7777 and form will 7778,
but after just installation it work into these ports but when i restats the system then port of infrastucture change and it is 7779.
now if i run forms the it give internal error 500,
then I stop fist infrastucture http server then http server of form
and again first start infrastucture hhtp server then form http server
now agin infrastructure server port id 7779(insted of 7777)
but now my form work properly.
every day i do this job , but some time this method fails then i have to again install server and have to repeate above mention job .
pls help me
With regards
Siddharth Singh
[email protected]

Mid-tier listens on a lot of ports. On a std install (with both Infra and Mid-tier) Web-cache listens on port 7778 "in front of" httpd for OHS on 7779. So perhaps you forget to start web-cache? (run from BI home: webcachectl)
Perhaps the problem with Forms is related to X Toolkit?

Use DW8 and DW-CS3 on same machine

Similar Messages

Maybe you are looking for