Use e-mail as uid for membership mode
Hi there,
Has anyone set up iPlanet Portal Server to use a users E-mail address as his uid when using membership mode in the portal. If so can you post some details.
Thanx
We can give the User Name as the E-mail address of the user in the Self registration module. It will automatically get updated in the user profile as well.
Thanks,
Raj_indts
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers/support
Similar Messages
-
IPhoto 11 (9.2.1) can't use iCloud Mail smtp server for email.
iPhoto 11 (9.2.1) can't use iCloud Mail smtp server for email. "The email server didn't recognise username/password combination". Both appear correct in preferences/accounts. Mail sends and receives messages perfectly.
(This problem also occurs when trying to send from Thunderbird, however both iPhoto and Thunderbird can send perfectly well using the Gmail server).Hi there
I should explain that I have 5 days experience of the iMac but have had a working iCloud account with my iPad for several months. I don't think this is an iCloud issue as such. My thought is that this is something to do with the Mail application itself and its relationship to my Apple ID etc. (Perhaps when the iMac first configured itself?)
I have deleted and manually reset both Mail and iPhone account settings for iCloud using the Apple recommended settings and I have tentatively checked that the username/password combination is as expected in Keychain but I'm too much of an Apple novice to go any further with that.
On a PC I think I would try reinstalling the Mail programme but I don't see that as an option. -
I have been using yahoo mails from iPad for several months. Today I am unable to access my mails even though I logged in to yahoo....the signin screen is keep coming when I tried to access mail.....is it due to iPad or yahoo?
It sounds like you might need to contact Yahoo! if you aren't able to setup your email account as a new account after deleting it.
I found some links on the Yahoo! website that might help:
http://help.yahoo.com/kb/index?page=content&id=SLN4138&locale=en_US&y=PROD_MOBIL E
http://help.yahoo.com/kb/index?locale=en_US&y=PROD_MOBILE&page=content&id=SLN261 7 -
Using BT Mail smtp server for non-bt account
Having recently discovered the hard way that I was migrated (and had no BT e-mail for 3 days), I have now discovered that all the authorisations I had set up for sending of e-mail fwith the senders address being a non-bt account have gone.
The help files point me in the direction of setting up BT Mail to get non-bt mail for me. This is not what I want. All I need is to authorize andrew@******.org.uk as an authorised user on my BT account. Thunderbird is quite capable of getting the mail from mail.****.org.uk with POP3. I just need to be able to use the BT smtp server for outgoing mail only.
Help Please
Andrew Johnson
Solved!
Go to Solution.Appears to be working again with andrew@******.org.uk
I guess it was just a glitch. -
Survey: Do you like 1 or 2 columns for landscape mode?
Hi,
I wodnering if I should use 1 or 2 columns for landscape mode. One column may seem easier to read? But, two columns look more like a book.
What do you use? What do you thin is best? Any downsides to using one over the other?
Many thanks,
ElaineToo generic...
You need to be more descriptive with these questions:) Not every type of book uses the same type of layout.
Ken -
How to modify & use Printer Defination files for Character Mode Report
How can use & modify printer defination files for changing formats & orientation in character mode report. I donot know how to use printer defination files I tried to set the system parameter (Desformat) but it doesn't work.
I m also faced same problem that u face,
If u want to make character mode report so plz follow these instructions:
1. Set the properties of Report Name Node in Character Cell is Yes.
2. Change the mode of the System Parameter Mode is Character.
3. Goto the Layout---> Main Section Properties and set the Character Report Width and Height like 132 and 66
4. Create Formula Column and write this code "RETURN(CHR(14));"
5. Goto Layout Model and map this formula column into Header of the Body Like If ur Company Name is "ABC COMPANY" attached with field and map Formula Column.
5. Goto Printer Definition File DFLT.prt open in NotePad and set width and hieght that u set in Main Section of Report.
6. At Last u Run the Report with Some System Parameter or User Parameter and View as Character Mode Report.
In My Case I used EPSON LQ2180 Printer
So, U Ask More Qustion and u have more knowledge About character mode report Plz Mail me at this address.
Shahid Shafi
[email protected] -
I have an issue where Firefox wont' quit and gives a "not responding" message after I have been using Google Mail. It works fine when I am not using that program. I have tried Safe Mode and the problem still happens when I go to Google Mail, so it is not connected with add-ons, extensions, etc.
Many site issues can be caused by corrupt cookies or cache.<BR><BR>
Clear the Cache<BR>
'''''Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"'''''
<BR><BR>and<BR><BR>
Remove Cookies<BR>'''''Firefox/Tools > Options > Privacy.'''''<BR>
Under '''History''', select Firefox will '''Use Custom Settings'''.<BR>
There is a button on the right side called '''Show Cookies'''.<BR><BR>
If there is still a problem,
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
<BR>While you are in safe mode; '''''Firefox Options > Advanced > General'''''.<BR>
Look for and turn off '''Use Hardware Acceleration'''.<BR>
Poke around safe web sites and see if there is still a problem. Then restart. -
Using thunderbolt to firewire adapter for target disc mode
I need to transfer several GB of data from a 2011 iMac running OS 10.6 to a new Mac Mini running OS 10.9. Can I connect the older iMac to the newer Mini with a Thunderbolt to Firewire adapter and boot the iMac into Target Disc Mode and transfer the data to the new Mac Mini? I've used TDM with two Firewire machines, but not with a newer Thunderbolt to Firewire Machine using an adapter.
Thanks for any input.
--SLHi Salnews,
I've done quite a bit of research on this, as this is what I plan to do (only from a MBP on 10.9, but I don't think your situation would be any different) and everything I've read says the answer is yes.
EDIT: I see you're on 10.6.7. You should update to 10.6.8 first. -
Firstly I am unable to use Apple mail except for hotmail, for blueyonder, gmail or Sky as the server shows as (off line) and I have no idea how to get them on line even though I tell them to go there.
My pop up blocker doesn't work and I am blitzed with advertising windows virtually on ever command I make, one seems to be impossible to unsubscribe from.
When I am in an email with a web link the web link doesn't work and I get a window saying that I must have a pop up blocker, but if I switch it off it is no different, what does work is switching the "enable Java script off", then when I get to the web site I can't use it until I switch the java script back on.
I can't do a screen shot either full or partial, when I try it changes the web site that is on screen to another.
So what have I done that might have caused problems, downloading Yosemite seemed to be the start of the problems. Since then I have started to install Mackeeper, after checking with a family members who should know, that MacPaw is safe. I decided that I didn't want to pay the subscription, so went through the uninstall instructions but it comes up as a pop up with considerable regularity.
My stress levels have gone through the roof with pop ups happening so regularly and not being able to use Apple mail.o can anyone help please?
SMail troubleshooting - Yosemite
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages
SMTP servers keep going offline -
I've been using the mail app that came with my Mac for over a year. Out of the blue, it will not open and keeps giving me an error like "Mail cannot open because of an error and something about it not being compatible. Please help! I miss my mail
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
How to Use 'uid' for AD Users Without Domain Name For User Log in OAM
How to Use 'uid' for synchronized Active Directory (AD) Users into Oracle Internet Directory (OID) Without Domain Name For User Logins in OIDDAS and OAM
We successfully integrated OAM 11g with EBS R12.1.3 Now all the AD user id's stored in fnd_users table as [email protected]
How can we remove @abc.com
We are using OID 11g and OAM 11g
Found the similar note for OID 10G: How to Use 'uid' for AD Users Without Domain Name For User Logins in OIDDAS and SSO [ID 580480.1]
We are in OID 11g.
Any help on this greatly appreciated.I couldn't find any reference that could be helpful -- Please log a SR and see if this is supported and if the steps are available.
Thanks,
Hussein -
I NEED to use icloud mail on both iPhone 4s AND my PC. I need to use both.
Trying to use icloud mail on PC is mega glitchy (STOP SCRIPT WARNINGS EVERY FEW MINUTES) and frustrating because:
1. my PC is ancient (but nicely refurbished/fast)
2. I run XP (with both Firefox and Chrome- newest versions)
3. thusly, I DO NOT MEET SYSTEM REQUIREMENTS for iCloud.
In my passed attempts I found that
1. Yahoo doesn't work well on iPhone
2. Gmail doesnt work well on iPhone.
I must be missing something... an app or... maybe a donated/ NEW FREE MAC! (That would be sweet! Ha.)
Is there an email platform that will run well on both XP and iPhone?
or... Please say it isn't true: I would love a Mac tablet or desktop. We have no money for a mac. SOL? Is this iCloud apple tech only for wealthy middle class and above who can afford to have the newest and best of everything?@Naiks, having suffered through unsuccessful synching attempts for Calendar and Contacts myself, l would suggest you try the following:
UNINSTALL iCloud control panel from your PC. Seems silly, but do it.
Go into Outlook, and look at the very top menu. Click FILE, then ACCOUNT SETTINGS, then click the popup box.
You will see a list of all your email accounts. Make sure that ONE of them has a checkmark against it. If not, select the account your want as your default, and click "set as default.
Exit out of Outlook and reboot your machine.
Now reinstall iCloud, check CALENDAR and CONTACTS, and do as instructed when prompted.
Reboot for good luck and now launch OUTLOOK. All that remains is to locate your iCloud Contacts and Calendar files, and make them your default.
IMPORTANT: Don't panic if you can't find your contacts -- they're there. Click CONTACTS and you'll see you have several available contact files. Locate the one label "iCloud" in grey type. Right-click on it, select PROPERTIES, then click the Outlook Address Book tab. Check the box that says something like "Make this my default Outlook Address Book." Keep clicking "apply" and "okay" until you've exited out of the dialog box maze.
You may have to do something similar with your Calendar files. I dd not, but if you need to, do it.
Everything should now sync pretty seamlessly.
I didn't have the exact same problem as you, but my dilemma was close enough. Good luck!
Arthur P. Johnson -
Can my husband and I use the same e-mail address/AppleID for our 2 phones, our iMac, and our Macbook?
We share an e-mail account and would like to use the same e-mail address for both our phones, as well as our computers at home. Is this possible?
We both have itunes and apple ID's of our own right now, but since getting married, we are deleting these e-mail accounts and sharing one. How can we make this work?You may use the same Apple ID for iTunes and App Store purchases, but using different iCloud Apple IDs is recommended.
If you use the same iCloud account on your iPhones it will sync all of your contacts, reminders, and notes automatically and it could be a pain. I don't know exactly how you would want to have the iCloud accounts set up on the Macs, because I don't know exactly how you use them. (I am assuming you share?). But you can do whatever you like, you can even keep the same iCloud accounts, etc but you may want to disable the syncing of certain items, because reminders for ones phone popping up on the others automatically would probably get annoying, but that is just me. -
I want to use Mac Mail for my work email address, which containts multiple outbound options (i.e. hr@, me@ etc). Is there a way to set up Mac Mail to have an account with multiple outbound addresses rather than adding in multiple accounts?
This sounds like the age old problem with keychain & Safari. I don't know of a way to solve it without using something like 1Password.
The iOS app has it's own built in browser, so it has more control over what gets autofilled. Safari on OS X has an 1Password extension that handles account selection & autofill etc.
Keychain is great in principle, but it quickly falls down when you need tight integration with many ID's & different use cases (work, home etc).
I'd suggest you submit feedback to Apple about your thoughts. I did so years ago about this issue & this is how far we have come (back to the point where me.com synced passwords) :^)
http://apple.com/feedback/macosx.html
Other tools like lastpass or keypassx may also help if you want to truly segregate password storage, but that doesn't fix autofill, the way around that issue is to dedicate one browser for work. -
Mail server setup for LAN use only
Hello,
I want to use smtp-notify for alert mails.
But I want to send these mails to LAN only - no internet connection is available.
How do I set up a mail server on SOL11E (pop or imap)?
The mails in /var/mail are just a simple file so I can't use them (like svccfg setnotify problem-diagnosed mailto:root@localhost )
I want to have a system where I look into my Inbox of my locally connected client. So I will be automatically aware if something happened to the Sol11E system without looking into the log files or /var/mail manually.
ThanksDo you need this mail server just for the zfs scrub reports or for all e-mail? How are clients currently getting e-mail? If you already have a mail server inside the company, or if you already have hosted mail server for company e-mail, that should be sufficient.
If you do have an internal mail server, you should be able to set the DS parameter in sendmail.cf to specify the mail server. If you don't have an internal mail server, and you are all using external e-mail accounts, that should still work. By default, sendmail (if running) should be able to send e-mail outside the LAN. Sendmail uses DNS to locate the mail server for the recipient.
You can verify that dns is working on the client with nslookup or dig
-> nslookup -query=mx gmail.com
Server: -------------
Address: -------------
Non-authoritative answer:
gmail.com mail exchanger = 5 gmail-smtp-in.l.google.com.
gmail.com mail exchanger = 10 alt1.gmail-smtp-in.l.google.com.
gmail.com mail exchanger = 20 alt2.gmail-smtp-in.l.google.com.
gmail.com mail exchanger = 30 alt3.gmail-smtp-in.l.google.com.
gmail.com mail exchanger = 40 alt4.gmail-smtp-in.l.google.com.
I don't know if Solaris 11 Express has a companion CD. Solaris 10 does- and you can MAYBE install packages from it. On OpenSolaris there is the /usr/bin/updatemanager and /usr/bin/packagemanager commands. I suspect Solaris 11 Express also has the same. On OpenSolaris you could download packages from the OpenSolaris internet repository. It MAY include the IMAP server. (it does not for the OpenSolaris server I have.)
Alternately, you could look for it on sunfreeware.com ( the Solaris 10 packages might work) or compile it from source.
Maybe you are looking for
-
I don't know if it's always been there, but there is a search box now at the top of my Bookmarks toolbar that opens on the left side of my window. When the Bookmarks toolbar is open the first thing is Bookmarks and the X to close bookmarks. Just belo
-
Unable to email Pages 5.0 doc with track changes
In Safari, when trying to attach a Pages doc (Pages 5.0 in Mavericks) with track changes in gmail I get an "Attachment failed" error. In Chrome, I'm able to attach and send the file, but the person I've sent it to is unable to open it. Is anyone expe
-
How to change a property programmatically
Hello, How can I change a property during runtime? Like, change the label of a button, or change the header text of a table. regards, arnold
-
Emailed unknown images of a person in an unknown apple store.
Today I received several emails of Video and Images taken from an iPod in a Apple store from the email address [email protected] Why have I been emailed these?
-
I have an application that is translated from fr-ca to en-us. There is a process (an insert process) that when I execute it in french, it works well and when I execute it in english, I have this error : ORA-01861: literal does not match format string