Use "edit In" to take video clip to premier pro or premier elements like sending pic to photoshop

I'd like to be able to highlight a video clip and take to "edit In" for either premier pro or premier elements in the dame manner of taking a pic to photoshop or photo elements

I'd like to be able to highlight a video clip and take to "edit In" for either premier pro or premier elements in the dame manner of taking a pic to photoshop or photo elements

Similar Messages

  • I often use my iPhone to take video but the result is NTSC and I use PAL, how I can change? Can somebody help me? Thanks

    I often use my iPhone to take video but the result is NTSC and I use PAL, how I can change? Can somebody help me? Thanks

    My problem is when I transfer the movie on Final Cut for the assembly of the film, I know that I can convert with MPEG Streamclip but I would like to take my film directly on PAL. Is that possible? In the previous message I wasn't clear, I hope now I explained myself better. Thanks for help

  • Hi, is there any option how I can edit duration of multiple video clips (not stills) in iMovie 11, lets say if I want them 2 seconds long? Many thanks for any advice... Tom

    Hi, is there any option how I can edit duration of multiple video clips (not stills) in iMovie 11, lets say if I want them 2 seconds long? Many thanks for any advice... Tom

    Yes.
    iMovie 11 tutorials:
    http://help.apple.com/imovie/
    http://www.apple.com/ilife/tutorials/#imovie
    and also these:
    http://www.kenstone.net/fcp_homepage/imovie_09_stone.html
    http://www.kenstone.net/fcp_homepage/imovie_09_stone.html#interface

  • Fast Color Corrector Edit Effects to a Video Clip --- need help, please

    I am editing a single video clip.  The clip is too dark, even though I used a video light.  Classroom in a Book, page 298 recommends to apply the Fast Color Corrector.  I tried...BUT as book reads, the color corrector wheel should pop up and allows changes to color.????
    Please help.  With Thanks.  Please reply with help to me by e-mail...[email protected]
    Larry

    Hello Mr. Hoecker:
    Thanks very much for your reply and advice.  I am enclosing photos to show that:
    I can NOT see anything by clicking on the grey triangles.
    In “Fast Color Corrector” I do NOT see a section which says…”Input Levels”
    Perhaps my install of CS 6 is missing some software.  I will re-install and see until you can reply on this.
    This is a page from the single clip I need to lighten so the face and black dive suit shows better.
    FYI:  I have been an Adobe subscriber and user since there was Adobe.  I try to use the Classroom in a book for CS 5 and CS 6.  When stumped, I go into the book and try to find a fix. In this situation, the little triangles, etc. are NOT there where I can see them.  And…YES there is a LOT that I do not know.
    Many thanks.
    Larry McKenna

  • How do I Edit a MPEG1 video clip with QT Pro?

    I have several video clips from my Sony H-1 digital camera that I want to edit. They are in MPEG 1 file format. I have them on my iMac in iPhoto and when I open them in QT Player (bought the Pro key) the Edit features (cut, copy, delete) are greyed out and not usable. I read in another posting that MPEG 1 and 2 cannot be edited. Is this why my edit controls are greyed out? If so, can I convert my video files to something that I can edit? Any help would be most appreciated.
    Forest

    A bit of caution. You don't want "clipping" files as they are just still images dragged from a .mov file. You only get "time" if you drag a "selection".
    Make a "selection" (timeline) and "drag" this over an existing, or new "blank" movie.
    This new file will only show the timeline portion of the file but will be the same file size as the entire "original" MPEG format.
    Using MPEG Streamclip will allow you to "edit" and convert to QT formats. These new files will be sized based on the data in the file.
    On a Tiger machine you'll notice the green + symbol during your drag. Be sure to use Save As and make the new file "self-contained".
    As broke as I am I need all the "free" tools I can find. MPEG Streamclip is now part of of my Mac tools. The conversion to DV Stream alone is great. Being able to control the size (dimensions) and use other export formats is a bonus.

  • Using Safe Margins in PE11 Video Clips

    Is it possible to manually resize a video clip in Premiere Elements 11 so that it fits inside the safe margin frame?  If so how do I do this?
    Also, is it possible to get rid of video clips' black side bars in PE!!?  If so how how do I do this?
    Thank you,

    andrew-dd_1937
    What computer operating system is your Premiere Elements 11 running?
    1. With the Safety Margins on in the Edit area monitor and the video clip selected, scale the image in the monitor to fit the area of interest.
    Scaling can be done by clicking on the monitor to bring up the image's bounding box and then dragging on one of the handles of the bounding
    box for the scaling.
    Tip: Depending on the specification of your TV, you can alter the Safety Margins in Edit Menu/Project Settings/General targeting
    Title Safe Area
    Action Safe Area
    Also, in Applied Effects Tab/Applied Effects Palette/Motion Panel expanded, you can uncheck the option Constrain Proportion so that
    you can scale width and height separately.
    Scaling can also be done by selecting the Timeline clip and then using the Scale Slider found Applied Effects Tab/Applied Effects Palette/Motion
    Panel expanded and its Scale property.
    Where are you seeing these black border in Premiere Elements....?
    When you first drag your import to the Expert workspace Timeline or some place else. If at export, then you (manually) or the project
    (automatically) have not set the correct project preset to match the properties of the source media. So, more information on what is
    happening here.
    Please let me know if I have interpreted your questions correctly. If not, please more details.
    Thanks.
    ATR

  • I want to copy video, cutaways and audio combined and use in another project. So far I can only copy the video clip or one of the other elements at a time. How do I group all of them?

    I want to group my  video clip with its audio and cutaway clips so that I can copy the segment and move it to another project. So far I can only move one element at a time. How can I group all the elements?

    You can select multiple objects in the timeline in the usual Mac way - hold down the shift key while you click on the objects then copy, select other project, position playhead where you want to insert then paste.
    Geoff.

  • I am having trouble getting sound on video clips I have imported into Premiere Elements 10.

    I am having trouble getting sound when importing video clips into Premiere Elements 10.  Is someone able to offer me a solution as I have no idea what I have done to cause this to happen. 
    The clip has sound when opened with windows media player.
    Thank you

    Hi Steve,
    After reading everybody’s responses I am feeling a little out of my depth.  Being new to this I am having difficulty in understanding a lot of the information given to me and also in the information you require from me.  It appears that one thing I should never do is mix film from two different cameras.  I would really like to fix this one particular clip though as it holds an interview that was taken when leaving Coober Pedy and something that I don’t want to lose.
    I have today done some research on the camera that took the offending video clip.   It was a Samsung S85 and according to the Samsung website it uses MJPEG video format.
    Here are the specifications as per the Samsung website.
    Camera Type
    Ultra-Compact Point-and-shoot Digital Camera
    Image Quality
    Image Sensor
    1/2.5" 8.3 Megapixel CCD
    Effective Resolution
    8.2 million pixels
    Color Depth
    24-Bit RGB
    Color Modes
    Normal, B/W, Sepia, Negative, Red, Green, Blue, Custom Color
    Image File Formats
    JPEG (Super Fine, Fine, Normal)
    Recorded Resolution
    8M (3264 x 2448)
    7M (3264 x 2176) - 3:2
    6M (3264 x 1824) - Wide
    5M (2592 x 1944)
    3M (2048 x 1536)
    1M (1024 x 768)
    Video Recording
    AVI Motion JPEG with Audio
    640 x 480 @ 30 or 15 fps
    320 x 240 @ 30 or 15 fps
    Clip length limited only by available memory
    5x optical zoom available during video record
    Audio Recording
    WAV format (monaural)
    I downloaded and installed Media Info and Morgan Multimedia MJPEG Codec V3.99.108 today.  Do I have to register it to get it to operate?  I read the documentation file that came with it hoping to find a clue as what I should do but I could not comprehend the information it contained.
    Thank you and other members who have responded to my plea for all the help you have given me.
    Judy

  • Can you use apple remote to take photos on mac book pro?

    I have an up-to-date apple remote.  Is there a way to use it to take photos on a macbook pro (from a distance)? Or for that matter, on an iPhone??

    Twisted Melon's Mira, http://twistedmelon.com/mira/, is one application that allows you to use your remote with Photo Booth on a MBP.

  • I want to transfer the Video transitions from premier Pro to Premier Pro CC 2014 I like to use the old video Transitions?

    I want to transfer the Video Transitions fro premier Pro to my new project in Premier Pro CC 2014 what can I do?    My e-mail is( [email protected] )

    Hi
    How did you "transfer" Express?
    It might be better to re-install Express 9 from scratch, though without an Optical drive you would need to:
    a) Use an external Optical drive
    b) Make a disk image of the installer on another computer and then copy that image to the rMBP
    c) Make use of Apple's Remote Disk
    http://support.apple.com/kb/HT5287
    CCT

  • How to edit a multiple audio video clip on Premiere

    Hello everybody
    Maybe this is a dumb question, I'm sorry if I'm asking what is obvious for you, but I swear I tried to find on the web and on this forum, but I couldn't find anything.
    Well, I made a video using a screen capture software called Dxtory, that provides me the ability to record my PC screen, with multiple audio tracks.
    Ok, now I have a 15gb avi file. When I open this file in the Media Player Classic, I can play one or both channels. The first channel is the original audio captured from my PC. Every audio generated by my PC is in this track. The second track is my voice, with my commentaries. I have all of this in one single file. They are not splited. It's just one file.
    Then when I import into Premiere, the software just recognize the video track and the first audio track. I can't find the second, with my voice.
    I know I can split the clip into 3 files (1 video and 2 audios) but it would take longer. I just want to drop the file on Premiere and edit the audio volumes quickly, because when I talk I would like to low the volume of the PC audio.
    Now, the question: Is there a way to Premiere recognize both tracks in this single file? How?
    Thanks in advance for any help.

    I'm actually surprised that Pr can import this at all--the video is Xvid. Maybe it's some variant that Pr's importers can handle, as Jeff suggested. I dunno--it doesn't play well for me, regardless, and I'm not going to install the Dxtory codec to find out.
    Anyway, to the matter at hand: while AVIs can, apparently, contain multiple audio tracks, Pr's importers are limited to a single track. However, Pr has other importers than can handle multiple audio tracks. QuickTime--which is a wholly different process--supports multiple audio tracks, as does MXF (some flavors). However, Xvid in QuickTime (which is feasible) won't import in Pr (at least on a PC), and Xvid won't go into an MXF file at all; that means you'd have to transcode. Personally, this would be my choice--but I found that the original clip played back pretty terribly, so that would be why I'd go that route.
    Additionally, you could extract the second audio track to a separate WAV file, import both the AVI and WAV, and then use the Merge Clips feature to marry them together as one pseudo-clip. Not perfect, but it would work. The benefit is that you don't re-encode anything.
    So, I've got solutions for both the re-encode/MXF option (my preference) and the AVI/WAV option. Here's proof of the MXF (transcoded video to XDCAMHD422 50Mbps) with four audio channels (stereo must be split to dual mono):
    At the end of the day, these (or a variation of them) are your only options. Pr simply won't import multiple audio tracks (even dual mono) in an AVI container. Let me know if you're interested in either of the solutions.

  • Trying to organise video clips but can not find them in iphoto under Movies but do appear idvd under movies.How can I get into iphoto movies section to edit and organise the video clips

    In iphoto '08 in my Library section "Movies" doesn't show as a seperate folder so to find my video c;ips I have to go through 13,000 photos and yet in iDVD they do show up in the media area. How can I edit them and put them into specific files?

    Tell me if a video has been recorded on its side! or even upside down, can you turn it round the proper way?
    If you have Quicktime Pro you can rotate the video. There's a plugin for iMoive that can rotate clips.  Go to MacUpdate.com and do a search for "rotate video" and you'll find several apps that can do the job and the plugin: MacUpdate: Search for '+rotate +video'
    OT

  • How have I lost the  green Audio track that used to be below the Video clips?

    QUESTION!
    1. Where has my Audio Track gone?
    2. How can I get the Projects to stay where I put them in the Library. OK I can tell the latest to Go to the top - so why cannot I say Stay in Title order.

    This forum is for mobile iMovie (iPhone & iPad).
    You may need the iMovie Mac forum:
    https://discussions.apple.com/community/ilife/imovie

  • Everything was great until I exported my Imovie (09) and then every video clip that was stabilized was suddenly shaking like crazy.

    I have a project that appears to be great until I export to either .M4A or .Mov and then everything looks like the cameraperson has had some serious seizures.  What is odd is that the stabilization works great while working on the project in Imovie.  Can anyone help?  The content was captured using a Samsung HD video camera (flash memory).
    D

    Jim
    Sorted.
    I found a post elsewhere and the suggestion was to delete the projects folder. Then launching IMovie, the software creates a new projects folder, and I moved the projects in one by one, until I found the one that crashed it.
    I suspect your solution would have been quicker however!
    I just wish IMovie was less sensitive and just told me what the problem was!!
    Thanks again.

  • How do I save my iPhone videos to my MacBook Pro? It seems like they import into iPhoto as photos instead of videos...?

    I need to open up some space on my iPhone 5 but I have a ton of videos of my newborn/toddler son on it that I don't want to lose.  What is the best way to ensure they are archived safely to my MacBook Pro hard drive?  It seems that they import into iPhoto along with the photos, but I'm not sure if they stay videos or get turned into photos.  If they are in iPhoto, what's the best way to make sure they get exported and backed up to an external safely.  Thanks in advance for the help!

    An imported video cannot change or get turned into a photo file by the import. An imported video will have an icon of a still frame from the video. Have you selected any of the imported videos in iPhoto to watch/play the video?
    With a Mac, you can import photos and videos with iPhoto or with the Image Capture application. One is not better than the other.
    To include your iPhoto library with your computer's backup, select and drag the iPhoto Library file located in the Pictures folder in your Home directory to the external hard drive.

Maybe you are looking for