Use EOIO on Sender RFC and outbound ABAP proxy calls

In the comm channel of SOAP and FILE there is a simple flag to set for QOS = EOIO
In Plain HTTP adapter a QOS parameter can be supplied.
IDOC uses control record tricks or a Receiver adapter option.
But what about the RFC and XI adapters.
The docu states QOS of EOIO for RFC and XI adapters is possible.
How is set for sender RFC and Sender XI adapters?
regards
Phil

Phil,
I was discussing with Michal about this.
I suppose it is not fully EOIO, because you don't send directly from the outbound queue to the inbound queue. The AE service may not have a specific queue for that message, until the queue is associated in adapter module. Maybe (just maybe), if you get unexpected extra processing in the initial AE reception of the message (and hence, before the queue is set, in adapter module), you may have some inconsistencies with the processing order in sender system.
But again, that is just a speculation.
I'm not sure what is the behavior it'll have.
And even if what I speculated is right, it is a really short amount of time.
But again, EOIO would not be 100% guaranteed (maybe 99% hehe).
But sometimes (most of the times) that is not enough.
Regards,
Henrique.

Similar Messages

CX_BGRFC_INVALID_DESTINATION during outbound abap proxy call on 7.1

Hi guys,
I'm trying to set up a scenario with outbound abap proxy call using the new WS adapter and when I execute the report with the proxy call I'm getting the CX_BGRFC_INVALID_DESTINATION exception.
I've generated proxy w/o problems, I've set up everything in SOAMANAGER.
Have you experienced this issue?
Thanks for your help,
Olian

Hi guys,
so my connection to SLD works fine now and I'm still getting the error. Any other ideas?
Just in case: this is my proxy code. Is this correct for using with 7.1 and WS adapter?
REPORT Z_PI_PROXYTEST.
data sender_object type ref to ZCO_PROXYTEST_OUT.
data out type ZMT_PROXYTEST_OUT.
data lo_sys_exception TYPE REF TO cx_ai_system_fault.
data err_result type string.
out-ZMT_PROXYTEST_OUT-data = 'sample'.
try.
    create object sender_object
      EXPORTING
        logical_port_name = 'PROXYTEST'.
    call method sender_object->PROXYTEST_OUT
      EXPORTING
        output = out.
    commit work.
catch cx_ai_system_fault into lo_sys_exception.
    call method lo_sys_exception->IF_MESSAGE~GET_TEXT
      RECEIVING
        result = err_result.
    write err_result.
endtry.
write 'Data has been sent to PI'.
Thanks for your help, Olian

User-exit/BADI during outbound ABAP proxy call

Hello,
I want to introduce certain check during outbound ABAP proxy calls to PI. This is a generic check, failure of which would stop the proxy call to proceed and raise an exception.
I would like to place this at the generic place which is called for all the outbound ABAP proxy calls, rather than coding this in each and every outbound proxy class as the check is generic.
Is there some user-exit/BADI where i can introduce this? Maybe within class CL_PROXY_OUTBOUND or somewhere else where i can introduce this check.
Any help in this regard would be appreciated.
Best Regards,
Gajendra.

Dear Gajendra ,
i agree with sabrish, you must be having a z report on the application system that must be calling that outbound proxy...may be if the check is generic it may not be related to a proxy so you can code a FM and then call it before you call that proxy in the z report
Giving points is another way to say thanks

Exception handling in outbound ABAP proxy

Hi All,
i need to catch exception in outbound abap proxy in two cases:
1. if RFC dest in R3 which is pinging to XI goes down.
2. IF xi server is down.
in both the cases i need to catch the exceptions.
now i written the code in this way:
DATA: v_exceptions TYPE REF TO cx_ai_system_fault.
TRY.
CALL METHOD zirco_o_msg_if_as_req_details=>execute_asynchronous
EXPORTING
output = s_reference.
COMMIT WORK.
CATCH cx_ai_system_fault INTO v_exceptions.
WRITE: 'Exception CX_AI_SYSTEM_FAULT caught'.
WRITE: / v_exceptions->errortext.
WRITE: / v_exceptions->code.
but this code is not working.
can anybody tell me how can i acheive this?

Hi All,
I need to log the error when receiver syatem is down.
Its like this:
Outbound proxy >>>XI>>>File adapter..
Now if xi goes down....means message is succussefully sent from ISD and get stuck in XI then i need to catch this exception in ISD.
Is it possible?? if yes then how??
Kunaal

Security: MLS between XI IS and IE (ABAP Proxy System)

Hi All,
Is Message Level security possible between XI IS and IE (ABAP Proxy System).
I hope HTTPS is supported for XI Receiver Adapter to ABAP Proxy System. What are the activities in XI as well as ABAP Proxy system to use HTTPS protocol in ABAP Proxy Communication.
Regards,
Sudharshan N A

Hi,
Check the following links.. you will get the information all about the securities...
http://help.sap.com/saphelp_nw04/helpdata/en/f7/c2953fc405330ee10000000a114084/content.htm
Also read thru this link for message level security - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d024ca8e-e76e-2910-c183-8ea4ba681c51
http://help.sap.com/saphelp_nw04/helpdata/en/a8/882a40ce93185de10000000a1550b0/frameset.htm
message level security/encryption and decryption
Message Level Security and Performance
Also find soeminformation in these links
http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/882a40ce93185de10000000a1550b0/frameset.htm
/people/aparna.chaganti2/blog/2007/01/23/how-xml-encryption-can-be-done-using-web-services-security-in-sap-netweaver-xi
Step by step guide for SSL security
step by step guide to implement SSL
Thanks
Swarup
Edited by: Swarup Sawant on Apr 9, 2008 12:34 PM

Can we edit SOAP Header for an Outbound ABAP Proxy message?

Hi,
Can we add some information such as dynamic configuration to the SOAP header for the outbound ABAP Proxy from ABAP report in SAP Application System?
Regards,
Praveen Gujjeti.

Hi Praveen, have you found soulution for this? Can you share it with me?
From here http://help.sap.com/saphelp_nw70/helpdata/EN/d6/49543b1e49bc1fe10000000a114084/content.htm
The help described that:
Set logging in the message header. This means that this message is logged even if logging is deactivated explicitly in the configuration. The logging information is part of the message header:
¡ <SAP:Logging>1</SAP:Logging>
Activates logging explicitly.
¡ <SAP:Logging>0</SAP:Logging>
Deactivates logging explicitly.
So it means that we can edit SOAP header for outbound ABAP proxy. But i haven't find the correct method to do that.

Abap proxy call : synchronous / background ?

Hi,
I use currently abap proxy call to send data from ECC to XI, and it works fine ! But... I would like to know two points :
1. Is it possible to execute SYNCHRONOUSLY this call abap proxy and not only in asynchronous...
2. Is it possible to execute in BACKGROUND this call abap proxy, because it seems it use a dialog process, even if the call is inside an abap program executed in background
I will appreciate your feedbacks on these both points ?
Regards.
Mickael

Hi,
Yes, we can do Sysnchronous call in Proxy.
and we can do the Background job schedule also in Proxy .
Reffer this help file
http://help.sap.com/saphelp_nw04/helpdata/en/86/58cd3b11571962e10000000a11402f/content.htm
Reffer this BLOG also
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
Regards
Seshagiri
Edited by: N V Seshagiri on Feb 12, 2008 11:19 AM

System exception after a succesful synchronous ABAP Proxy call

Guys,
I have the following scenario:
1) From an R/3 box I initiate a synchronous ABAP proxy call
2) On XI everything works fine, the http request is sent out (using the http adapter), the response comes back succesfully and it is transfered back to the R/3 box - no error whatsoever
3) On the R/3 box however the EXECUTE_SYNCHRONOUS method throws a system exception BUT the returning (input) parameter holds the response message!
So in the end if I catch this exception (CX_AI_SYSTEM_FAULT) then I could be happy and just ignore the exception, but I don't feel comfortable leaving it this way. Why is the exception and how can I eliminate it?
Any help would be greatly appreciated.
Thanks a lot,
Viktor

Joel/Jörg,
Thank you for your response, indeed I ended up debugging it and found my error deep down:
Error code: ABAP_PROXY.PARSE_APPLICATION_DATA
Error text: Error handling Response Message; XSLT error: CX_XSLT_DESERIALIZATION_ERROR: XSLT program and source line: /1SAI/XS00000000000000000088: 0000000122; Tree Position: abap.values.1.1.1.6.1.5 ABAP Classname: CX_SY_CONVERSION_DATA_LOSS Data String: WINDSOR CT 06095-1712
The data field defined in SAP was too short for the field.
Thanks a lot,
Viktor

ABAP proxy call to eBay webservice

Hi,
I'm trying to configure an ABAP proxy call to the eBay SOAP web services using ECC6 (SP14).
Has anyone had any experience they can share on how to configure the security for the proxy endpoint in SOAMANAGER to use the ebay services?
Thanks
Tim

Hi,
Yes, we can do Sysnchronous call in Proxy.
and we can do the Background job schedule also in Proxy .
Reffer this help file
http://help.sap.com/saphelp_nw04/helpdata/en/86/58cd3b11571962e10000000a11402f/content.htm
Reffer this BLOG also
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
Regards
Seshagiri
Edited by: N V Seshagiri on Feb 12, 2008 11:19 AM

Sender RFC and JDBC communication channels required to be activated

Hello Guys,
Whenever we have a Oracle restart after the server is shut down for maintainence . The sender JDBC communication channel does not poll and we have to activate the channel again in the Integration Directory to make it work, is there any way to make it work automatically.
Similar is tha case with the sender RFC communication channel.
Allthough the component monitoring shows green button for the JDBC, RFC communication channel.
In case of the JMS channel (sender) the channels are in red.
Thanks for your help.

HI
There is no automatic ways to restart channel that you have to manually start.
You need to stop the channels first before getting oracle server down for maintenance. This will save from errors. Maximum what you can do is to start stop channel using a program externally but that require development.
Start/Stop using RWB
Starting / Stopping of Communication Channel from RWB
Start/Stop without using RWB
Control Communication Channels Externally without using RWB
Thanks
Gaurav

RFC Adapter or ABAP Proxy

Pls suggest me which one to use and why?
Any good blog
Regards

hi sehgal
for abap proxies see the below links
/people/sap.user72/blog/2005/12/13/integration-builders-through-proxy-server-part--2
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
/people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
/people/michal.krawczyk2/blog/2006/04/19/xi-rfc-or-abap-proxy-abap-proxies-with-attachments
/people/sukumar.natarajan/blog/2007/01/07/how-to-raise-alerts-from-abap-proxy
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies - Activate Proxy
/people/siva.maranani/blog/2005/04/03/abap-server-proxies - ABAP Server Proxy
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Client Proxy
/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - ABAP Proxy
http://help.sap.com/saphelp_nw2004s/helpdata/en/48/d5a1fe5f317a4e8e35801ed2c88246/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/ba/f21a403233dd5fe10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/41e08c90-0201-0010-9197-d8774336ea78
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0ae9874-109c-2910-f48a-e91f0cdd1c81
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
for rfc go to the below links
/people/community.user/blog/2006/12/12/http-to-rfc--a-starter-kit
Is it possible to use the RFC sender adapter for asynchronous calls? Async call
http://help.sap.com/saphelp_nw04/helpdata/en/f6/e002416225f023e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/f6/daea401675752ae10000000a155106/frameset.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci983752,00.html
regards
sreeni

Outbound ABAP proxy stops working

Hello experts,
We have an interface, which sends data from SAP to PI via outbound proxy. It worked before and at some point it stopped working in dev. But it still works in QA and production. I tried to make sure that the related objects in IR and the ABAP sender program are the same between DEV and QA and regenerated the proxy in SPROXY. However it did not work. No message could be found in SXMB_MONI and in the debugging mode, the exception of CX_INVALID_TRANSFORMATION raised when calling EXECUTE_ASYNCHRONOUS.
The attribute INTERNAL_SOURCE_POS showed red in variable L_TRANSFORMATION_ERROR, which references to cx_transformation_error.
Some of the called methods are listed below.
outbound_handler_execut -> CALL_EXECUTE_OUT -> xi_call_outbound( ) -> xi_process_payload( ) -> CALL METHOD cl_ws_payload_handler=>data_render
It is appreciated if you could shed some lights on this.
Thanks in advance for your help,
Shawn

Hi.
When you execute Proxy program check in ECC any message created in SXMB_MONI in ECC, of messages were found then shcek the status.
if no messages then problem with Proxy program , take help from Abaper.
Regards,
Raj

Web Service to ABAP Proxy, Calling RFC from ABAP Proxy

can any body send me the notes or Step by step process of Webserice of calling RFC using ABAP proxy, I am new to XI. send me detail process of this perticular scenarios

Hope this helps
/people/siva.maranani/blog/2005/05/23/communication-between-sap-system-webservice-using-proxies
also refer to
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
Rgds,
Kumar
Message was edited by:
Kumar

How to trigger Outbound ABAP proxy from PI

Hi Guru's,
We have one scenario in which we want interface to be run at 5 minute interval in PI but it has to get data from R/3 via RFC or ABAP Proxy (No file interface). Is there any way to trigger PI interface to get data from R/3 and after mapping send it via AS2.
Thanks in Advance.

Hi Gyaneshwar,
What Phani said is correct. Better you go with ABAP proxy, where you can validate the data with the condition, if fails you can raise an alert mail.
The code something looks like:
CALL FUNCTION 'Z_UTL_SENDMAIL'
        EXPORTING
          i_email       = gv_sender
          i_toemail     = ''
          i_subject     = gv_subject
        IMPORTING
          e_return_code = gv_subrc
        TABLES
          it_text       = git_text
          it_emails     = git_emails.
    ENDIF.
ENDIF.
There is no option to do it from PI.
Thanks,
Edited by: Hareenkumar on Feb 24, 2011 10:08 AM

Abap proxy call failed

Hi,
I am trying to call (synchronous mode) from XI 3.0 an ABAP proxy located on a R3 enterprise 4.7 ext 2.00 server.
Unfortunately, when I send the request message with the XI Adapter to the local integration engine using message protocol 2.0,
an error occured on the R3 system:
PROTOCOL.LOOP_IN_MESSAGE_ROUTING
<SAP:ErrorHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
               <SAP:Context></SAP:Context>
               <SAP:Code p1="is.00.hermes" p2="IS" p3="XI" p4="">PROTOCOL.LOOP_IN_MESSAGE_ROUTING</SAP:Code>
               <SAP:Text language="EN"></SAP:Text>
            </SAP:ErrorHeader>
            <SAP:HopList xmlns:SAP="http://sap.com/exchange/MessageFormat" Version="1.0">
               <SAP:Hop SystemName="is.00.hermes" Type="CENTRAL" TimeStamp="2005-08-04T18:11:25Z" WasRead="0">
                  <SAP:MessageInbound>
                     <SAP:Type></SAP:Type>
                     <SAP:AdapterRefId>3.0</SAP:AdapterRefId>
                     <SAP:MessageId>2B1B2E10-0513-11DA-A979-0013216B8075</SAP:MessageId>
                  </SAP:MessageInbound>
                  <SAP:MessageOutbound>
                     <SAP:Type>IENGINE</SAP:Type>
                     <SAP:AdapterRefId>3.0</SAP:AdapterRefId>
                     <SAP:MessageId>2B1B2E10-0513-11DA-A979-0013216B8075</SAP:MessageId>
                  </SAP:MessageOutbound>
               </SAP:Hop>
               <SAP:Hop SystemName="is.00.hermes" Type="CENTRAL" TimeStamp="2005-08-04T18:11:25Z" WasRead="0">
                  <SAP:MessageInbound>
                     <SAP:Type>IENGINE</SAP:Type>
                     <SAP:AdapterRefId>3.0</SAP:AdapterRefId>
                     <SAP:MessageId>2B1B2E10-0513-11DA-A979-0013216B8075</SAP:MessageId>
                  </SAP:MessageInbound>
                  <SAP:MessageOutbound>
                     <SAP:Type></SAP:Type>
                     <SAP:MessageId>2B1B2E10-0513-11DA-A979-0013216B8075</SAP:MessageId>
                  </SAP:MessageOutbound>
               </SAP:Hop>
               <SAP:Hop SystemName="UPG" Type="RECEIVER" TimeStamp="2005-08-04T18:11:25Z" WasRead="0">
                  <SAP:MessageInbound>
                     <SAP:Type>IENGINE</SAP:Type>
                     <SAP:AdapterRefId>2.0</SAP:AdapterRefId>
                     <SAP:MessageId>2B1B2E10-0513-11DA-A979-0013216B8075</SAP:MessageId>
                  </SAP:MessageInbound>
                  <SAP:MessageOutbound>
                     <SAP:Type>PROXY</SAP:Type>
                     <SAP:MessageId>2B1B2E10-0513-11DA-A979-0013216B8075</SAP:MessageId>
                  </SAP:MessageOutbound>
               </SAP:Hop>
            </SAP:HopList>
            <SAP:MessageHeader xmlns:SAP="http://sap.com/exchange/MessageFormat" version="1.0" SOAP:mustUnderstand="1">
               <SAP:From>
                  <SAP:Name>WebServer</SAP:Name>
                  <SAP:Interface namespace="http://adixen.fr/test">DataUserQuery_out</SAP:Interface>
               </SAP:From>
               <SAP:To>
                  <SAP:Name>UPG</SAP:Name>
                  <SAP:Interface namespace="http://adixen.fr/test">DataUserQuery_in</SAP:Interface>
               </SAP:To>
               <SAP:MessageId>2B1B2E10-0513-11DA-A979-0013216B8075</SAP:MessageId>
               <SAP:QualityOfService>BestEffort</SAP:QualityOfService>
               <SAP:TimeSent>2005-08-04T18:11:24Z</SAP:TimeSent>
               <SAP:Direction>Response</SAP:Direction>
               <SAP:Document></SAP:Document>
            </SAP:MessageHeader>
            <SAP:InternalAttributesHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
               <SAP:AdapterInbound>PROXY</SAP:AdapterInbound>
               <SAP:AdapterOutbound>IENGINE</SAP:AdapterOutbound>
            </SAP:InternalAttributesHeader>
         </SOAP:Header>
         <SOAP:Body xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
            <SAP:Manifest xmlns:SAP="http://sap.com/exchange/MessageFormat" xmlns:xlink="http://www.w3.org/1999/xlink" version="1.0">
               <SAP:Payload xlink:href="cid:[email protected]">
                  <SAP:Document>TraceDocument</SAP:Document>
               </SAP:Payload>
            </SAP:Manifest>
         </SOAP:Body>
      </SOAP:Envelope>--SAP_41F726EA34ED2F498C6BA328BAB08C43_ENDcontent-type:text/plaincontent-length:2912content-id:[email protected]
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
         <SAP:TraceHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
            <Trace level="1" type="B">CL_XMS_TROUBLESHOOT-ENTER_PLSRV</Trace>
            <Trace level="1" type="E">CL_XMS_TROUBLESHOOT-ENTER_PLSRV</Trace>
            <Trace level="1" type="T">**************************************************** </Trace>
            <Trace level="1" type="T">*                                                  * </Trace>
            <Trace level="1" type="T">*                                                  * </Trace>
            <Trace level="1" type="T">XMB entry processing </Trace>
            <Trace level="1" type="T">system-ID = UPG</Trace>
            <Trace level="1" type="T">client = 100</Trace>
            <Trace level="1" type="T">language = E</Trace>
            <Trace level="1" type="T">user = YLEBLEVEC</Trace>
            <Trace level="1" type="Timestamp">2005-08-04T18:11:25Z </Trace>
            <Trace level="1" type="T">*                                                  * </Trace>
            <Trace level="1" type="T">*                                                  * </Trace>
            <Trace level="1" type="T">**************************************************** </Trace>
            <Trace level="1" type="B">CL_XMS_MAIN-CALL_UC_EXECUTE</Trace>
            <Trace level="1" type="T">Message-GUID = 2B1B2E10051311DAA9790013216B8075</Trace>
            <Trace level="1" type="T">PLNAME = SENDER</Trace>
            <Trace level="1" type="T">QOS = BE</Trace>
            <Trace level="1" type="B">CL_XMS_MAIN-CALL_PIPELINE_SYNC</Trace>
            <Trace level="1" type="T">Get definition of pipeline PID= SENDER</Trace>
            <Trace level="1" type="B">CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST</Trace>
            <Trace level="1" type="E">CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST</Trace>
            <Trace level="1" type="B">PLSRV_CALL_INTEGRATION_SERVER</Trace>
            <Trace level="1" type="B">CL_XMS_MAIN-CALL_PLSRV</Trace>
            <Trace level="1" type="B">CL_XMS_MAIN-CALL_PLSRV_LOCAL</Trace>
            <Trace level="1" type="B">CL_XMS_PLSRV_CALL_XMB-ENTER_PLSRV</Trace>
            <Trace level="1" type="T">URL for integration server read from global configuration </Trace>
            <Trace level="1" type="T">URL= dest://INTEGRATION_SERVEUR</Trace>
            <Trace level="1" type="B">CL_XMS_MAIN-SET_TECHNICAL_ROUTING_PROPERTY</Trace>
            <Trace level="1" type="E">CL_XMS_MAIN-SET_TECHNICAL_ROUTING_PROPERTY</Trace>
            <Trace level="1" type="B">CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP</Trace>
            <Trace level="1" type="E">CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP</Trace>
            <Trace level="1" type="E">CL_XMS_PLSRV_CALL_XMB-ENTER_PLSRV</Trace>
            <Trace level="1" type="E">PLSRV_CALL_INTEGRATION_SERVER</Trace>
            <Trace level="1" type="E">CL_XMS_MAIN-CALL_PIPELINE_SYNC</Trace>
            <Trace level="1" type="B">CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST</Trace>
            <Trace level="1" type="E">CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST</Trace>
            <Trace level="1" type="E">CL_XMS_MAIN-CALL_UC_EXECUTE</Trace>
            <Trace level="1" type="E">CL_XMS_MAIN-ENTER_XMS</Trace>
            <Trace level="1" type="E">CL_XMS_HTTP_HANDLER-HANDLE_REQUEST</Trace>
         </SAP:TraceHeader>SAP_41F726EA34ED2F498C6BA328BAB08C43_END
I guess the error occurs before the call of my proxy. Can anyone help?
Thanks,
Yann

Hi,
>>>However to be able to process XML messages on 'UPG' I need to activate the service '/default-host/sap/xi/engine'. This service start my local integration engine, correct?
I thought you tried to send messsages from the same WAS local can be set on every client - the same as R3 - right
further reference (XI configuration guide):
<b>Connecting Business Systems with an Integration Engine to the Central Integration Server</b> <-- you have to do all of those steps on your R/3 (SLD, SICF, SXMB_ADM etc.)
>>>>Last question do I need to have 2 different clients on UPG, the one for my local integration engine and the other one for my ABAP proxies? Can they be on the same client?
yes you can send proxies (from r3) to XI from the same client as your R3 system (application system)
no need for a second client on R3 side:)
sorry if I confused you with my response
Regards,
michal
Message was edited by: Michal Krawczyk

Use EOIO on Sender RFC and outbound ABAP proxy calls

Similar Messages

Maybe you are looking for